| Age | Commit message (Collapse) | Author |
|---|
|
2006-03-13 Alan Maguire <alan.maguire@sun.com>
* quagga.xml.in: Change the naming of services and instances.
network/routing/quagga:<daemon> may be neat and tidy, but
it's at odds with SMF convention elsewhere that demands
the service be named for what it does, and the instance name
describe the implementation (e.g. network/smtp:sendmail).
Remove call to method script for 'stop', SMF can do that
itself.
Enumerate the privileges required in the SMF manifest, with the
method_credential element.
Dont try provide seperate properties for each argument, it's
just tedious, particularly when they can no longer be
inherited from a common quagga service - use a single
"daemon-args" property, defaulting to -P 0.
Specify authorisation for the 'routeadm' utility and for
RBAC.
2006-03-13 Paul Jakma <paul.jakma@sun.com>
* quagga.init.in: Update to match SMF manifest changes.
If run from an SMF environment, assume method is start.
Offer a more tradition init script interface for pre-SMF.
Enable zebra for the link-state daemons.
Don't allow daemons to start in non-global zones, except
for bgpd - it doesn't have to care about underlying
networking much.
Remove all the svcprop calls, SMF or the user will supply any
arguments on the command-line.
* depend.smf.in: Add dependency on SUNWroute, which provides
routeadm, which provides /var/svc/manifest/network/routing
* prototype.smf.in: Install manifest to
var/svc/manifest/network/routing.
|
|
2006-02-09 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct {rib,nexthop}) Rearrange fields to avoid
needless padding.
(struct rib) Remove the indirect pointer, not used anywhere!
|
|
2006-03-14 Paul Jakma <paul.jakma@sun.com>
* privs.c: (zprivs_caps_init) Change user IDs before lowering
privileges, while this seems to work on Linux, on Solaris
it rightfully refuses due to PRIV_PROC_SETID having been
dropped.
|
|
2006-03-12 Paul Jakma <paul.jakma@sun.com>
* bgp_attr.h: (struct attr) rearrange fields to avoid
wasted padding between them as much as possible.
(attr_count,attr_unknown_count) export new functions to
return number of counts of cached attributes.
* bgp_attr.c: (attr_count,attr_unknown_count) new functions to
return number of counts of cached attributes.
* bgp_route.h: (struct bgp_info) rearrange fields to avoid
wasted padding.
* bgp_table.h: (struct bgp_table) Add a count field, of number
of nodes in the table.
(struct bgp_node) rearrange fields to avoid
wasted padding between them, though I don't think there
was any in this case.
* bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count.
(bgp_table_count) new function to access the table count.
|
|
2006-03-06 Paul Jakma <paul.jakma@sun.com>
* if.h: export show_address_cmd, for anyone who wishes to use
it.
|
|
2006-03-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_clear_node_complete) Doh. When clearing
is complete we need to kick off FSM again.
|
|
2006-03-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_clear_node_complete) Doh. When clearing
is complete we need to kick off FSM again.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: (sockunion_{su2str,log}) Use XSTRDUP.
Particularly with _su2str, as that string gets XFREEd,
which can be annoying if run debug code in memory.c.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: (sockunion_{su2str,log}) Use XSTRDUP.
Particularly with _su2str, as that string gets XFREEd,
which can be annoying if run debug code in memory.c.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description
to state of peer while it's suppressed due to clearing.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description
to state of peer while it's suppressed due to clearing.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-02-19 Paul Jakma <paul.jakma@sun.com>
* depend.*: renamed to depend.*.in.
* depend.*.in: Add version dependency.
* Makefile.am: Generate depend.* from depend.*.in
Distribute the depend.*.in files rather than the depend.*
files.
* quagga.init.in: Enable zebra if one of the link-state
daemons is started.
Restart method is not required - SMF handles that.
* quagga.xml.in: Remove restart method details.
|
|
2006-02-19 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file.
* ChangeLog: Fix old, existing entry for snmptrap.texi addition to
credit the author, who got in touch with me.
* snmptrap.texi: Add comment line with author's details.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_announce_check) trivial, move declaration
of two local variables into the only block where they are
used, to aid the reader.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_routemap.c: (route_set_community) Quick, very hacky, fix
for the set-community leak, bug #89. True fix will be to
detangle the web of *_intern caching and provide saner object
caching for Quagga, future work.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_gettoken) fix gcc warning about
possible uninitialised usage.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: Add BGP_INFO_COUNTED to track whether
prefix has been counted or not.
* bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to
centralise inc/dec of prefix-count,
(bgp_rib_remove) Remove pcount decrement, use helper.
(bgp_rib_withdraw) ditto, additionally use previous function
too.
(bgp_update_main) Use pcount helpers.
(bgp_clear_route_node) ditto, aslo REMOVED routes don't need
clearing.
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove the delay field.
It served no purpose and just introduced bad behaviour.
Should be excised before its allowed to escape into 1.0.
This removes need for the 'flood' and runs_since_clear
fields.
* workqueue.c: (general) excise delay factor between queue
runs, hence the 'flood' crap too.. See above.
* bgp_route.c: (bgp_{clear_node,process}_queue_init) delay
field is removed from workqueue spec.
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* interface.c: (if_dump_vty) move flags to their line, neater.
|
|
2006-01-31 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Cleanup the hideous {net,ucd}-snmp section
by removing ucd-snmp. Hence fixing detection where
net-snmp is installed in /usr/local (Boris Kovalenko reported
the problem).
|
|
over connected routes
|
|
2006-01-30 Paul Jakma <paul.jakma@sun.com>
* zebra_rib.c: (rib_process) Fourth time lucky on this jinxed
commit, last commit had a hole that could allow connected
route selection to escape beyond the connected route logic.
This time I cross-checked with Gunnar first. ;)
|
|
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no>
* zebra_rib.c: (rib_process) Application of Gunnar's earlier
metric selection RIB change included incorrect tidy-ups made
by commiter. Fix. (NB: any errors here are again due to paul).
|
|
2006-01-25 Paul Jakma <paul.jakma@sun.com>
* (general) More solaris PF_ROUTE hacks. The IFF_UP mangling
for solaris was incomplete on the PF_ROUTE side. fix it.
This changeset generally uglifies things. For some future
work I'd like to see the state changes seperated out from
the details of the code. Differences between systems might
then be slightly easier to implement without convoluted
hacks.
Changes should be specific to Solaris mostly, however
also tested on FreeBSD 6.
* if_ioctl_solaris.c: (interface_list_ioctl) ignore ~IFF_UP
interfaces, we'll hear about them when/if interface goes up
through NEWADDR.
Update flags explicitely at end of it to kick mangling.
* ioctl_solaris.c: (if_mangle_up) removed to interface.c, in
kind.
(lifreq_set_name) more convenient to take the string, than
the ifp.
(if_get_flags_direct) new convenience function, returns
the actual flags. Used during bootstrap in if_ioctl_solaris.c
to peek at flags of logical interfaces to see whether or
not to ignore them.
(if_get_flags) ENXIO means it's gone, poke out IFF_UP and
kick flags update.
(if_{un,}set_flags) flags argument should be 64bit.
* ioctl.{c,h}: flags argument should be 64bit.
* interface.h: Add a 'primary_state' flag to struct zebra_if on
SUNOS_5.
Export if_flags_update.
* interface.c: (if_flags_mangle) moved over in kind from
ioctl_solaris.c. Nasty kludge to try get IFF_UP right, as
much as is possible. Also keep track of the actual IFF_UP
value for the primary interface, so we can know when the ifp
must be deleted.
(if_flags_update) Take a new interface flags value, apply it
to the interface, and take whatever actions are required due
to flag transitions.
(if_refresh) flag state change logic is moved out to
previous. Just call if_get_flags, which will end up using
previous to effect the update of flags.
(if_flag_dump_vty) IFF_IPV{4,6} aren't interesting, VIRTUAL
and NOXMIT are though.
* kernel_socket.c: (ifm_read) Down->Down transitions shouldn't
create ifp, for non-IFANNOUNCE systems.
Use if_flags_update to update flags.
flag transition logic is now handled automatically through
if_flags_update.
(ifam_read) Better to call if_refresh *after* adding
connected addresses, as connected count affects IFF_UP on
IFF_UP-mangled systems.
On Solaris, Up->Down due to DELADDR means we need to delete
the ifp - the IFINFO might already have been and gone.
* rt.h: include other dependent headers.
|
|
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Bump to 0.99.3
* doc/quagga.info: update auto-built file.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* stream.c: (stream_getq_from) should use POSIX uint64_t
not u_int64_t. Latter is neither a traditional BSD type, nor
a POSIX type.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-18 Juergen Kammer <j.kammer@eurodata.de>
* ospf_lsa.c: (ospf_router_lsa_new) dont take reference to the
stream data until it is constructed, data reference is
volatile due to the potential resize in link_info_set
2006-01-18 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (link_info_set) Resize the stream if required and
possible. Return number of links added.
(lsa_link_*_set) use return value from previous.
* ospf_lsa.h: Add OSPF_ROUTER_LSA_LINK_SIZE define.
|
|
* zebra_rib.c: Take interface metric into account.
|
|
* md5.c: Don't forget to keep const.
* regex.c: Cleanup code and remove warnings.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* kernel_socket.c: (ifam_read) Read metric from RTM_NEWADDR.
If interface is an alias, pass the alias as a label for
connected_add_ipv{4,6}.
* rt_netlink.c: (netlink_interface_addr) print out
IFA_CACHEINFO info, if present, when debugging kernel
messages.
|
|
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no>
* if_ioctl.c: (if_getaddrs) Be defensive about assuming
that struct ifaddrs will have ifa_addr filled in.
|
|
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no>
* connected.c: (connected_up_ipv{4,6}) Include interface metric on
connected routes.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* ospf_packet.c: (ospf_verify_header) print out the types
involved if there's a mismatch.
* ospf_zebra.c: (ospf_zebra_add) Adjust to new zserv format.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* zclient.{c,h}: (zclient_create_header) export this, seems others
could use it (in lieu of more complete zserv helpers).
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* vty.c: (no_terminal_monitor_cmd) New ALIAS for
terminal_no_monitor, in the more normal negating format,
to be kind to my fingers.
(vty_init) install new ALIAS.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* md5.{c,h}: (md5_loop) Is better off taking a void * and doing
cast to byte wise type internally, avoids needs for casts
in users.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* bgp_nexthop.c: (zlookup_read*) convert to new Zserv format.
(zlookup_query_ipv6) ditto.
(bgp_import_check) ditto.
* isis_zebra.c: (isis_zebra_route_add_ipv4) fix for new
zserv format.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* ripd.c: (rip_auth_md5) remove pdigest, not needed.
Use a local buffer for the auth_str, where it can be properly
nul padded. Do so, hence fixing MD5 authentication.
Key looked up via key ring should be used in preference to
the RIPv1 simple password, not other way around.
No need to copy around digests, we can reference them
directly.
The auth_len received can't be trusted, some implementations
lie (e.g. older ripd).
(rip_auth_md5_ah_write) rename len local variable to doff
to be consistent with other functions.
(rip_auth_header_write) add the missing return.
(rip_auth_md5_set) use the proper constructs to access stream.
|
|
* aspath_test.c: (validate) free the temporary aspaths.
(empty_get_test) ditto.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c:
(aspath_snmp_pathseg) move the static stream pointer out to
file scope, so it can be freed.
(aspath_finish) new function, free aspath resources.
* bgp_aspath.h: (aspath_finish) export.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_append_asns) XREALLOC can return
NULL theoretically, take care not to lose the allocated data.
(aspath_hash_alloc) aspath_dup already set the aspath
string - fix leak.
(aspath_parse) aspath_hash_alloc dupes the entire aspath,
including segments, but we forgot to free the temporary
assegment.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* lib/zclient.h: Update the Zserv protocol header with a version
field. Define the old command field to be a 'marker', to
allow old Zserv and updated Zserv to be differentiated.
Future updates will bump the version field obviously. New
command field is made wider. Try to stop using the
'zebra_size_t' typedef in the callbacks.
* lib/zclient.c: Update to read/write new format header.
* zebra/zserv.c: Ditto
|
|
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* if.h: (struct interface) expand flags to 8 bytes.
* zclient.c: (zebra_interface_{add,state}_read) stream read of
interface flags now need to use stream_getq.
(zebra_interface_if_set_value) ditto
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* zserv.c: (zsend_interface_{add,delete,update}) if flags are
8 bytes now, update to write out with stream_putq.
|
|
* vtysh.c: (vtysh_config_from_file) fix regression from
a previous cleanup, vtysh_client.flags and cmd->daemon are
bitwise flags, bitwise & was meant to be used. Fixes breakage
of integrated config file reading.
|
|
2006-01-10 Len Sorensen <lennartsorensen@ruggedcom.com>
* (general) Bug #234, see also [quagga-dev 3902].
Fix problem with nbr_self not being properly reinitialised
when an interface comes up, after having been down.
Some re-arrangement done by Paul Jakma, any bugs introduced
on top of Len's suggested changes are his.
* ospf_neighbor.c: (ospf_nbr_add_self) centralise
initialisation of nbr_self parameters here.
* ospf_interface.c: (ospf_if_new) deleting initialisation of
parameters of nbr_self, just rely on call to
ospf_nbr_add_self.
(ospf_if_cleanup) ditto.
* ospfd.c: (ospf_network_run) ditto.
|
|
2006-01-10 Juris Kalnins <juris@mt.lv>
* ospf_packet.c: (ospf_make_md5_digest) fix odd, if not
undefined effect, assignment of an increment expression.
|
