| Age | Commit message (Collapse) | Author |
|---|
|
* lib/stream.c: (stream_set_endp) Add checks to make sure that the
supplied 'endp' is within the 'size' of the stream, and that the
current read pointer 'getp' is not beyond the specified 'endp'.
|
|
ISSUE
When max-metric router-lsa administrative is invoked on an ABR created with...
area <area> range <addr/mask>
the summary LSAs are sent out with 65535 (max-metric) added to the normal cost.
When max-metric router-lsa administrative is invoked on an ABR created with...
area <area> range <addr/mask> cost <cost>
the summary LSAs are sent out with <cost> (the max-metric is ignored). This
second behavior effectively incapacitates the max-metric function.
PATCH
This patch evaluates the state of the router and if it's isolated as a stub
router (rfc3137) via `max-metric router-lsa`, we unconditionally uses the
value of 0xff0000 when advertising summary LSAs.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
When a range (or sub-range) is deleted, the area is notified by propagating a
MAXAGE LSA. This LSA stays in the database for a while to both insure
propagation as well as in the off chance that it's useful in the near future.
Unfortunately, the ABR algorithm was treating these MAXAGE LSAs as unchanged and
not propagating them within the areas.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ISSUE
When an area range is created in which there the sub-area has routes that are
smaller than the range, an ABR creates a blackhole route to cover the range.
When the range is removed, the blackhole route is not removed.
--A----B----C---
B is an ABR with A in area 1 and C in area 0. If A advertises `10.2.0.0/30` and
`10.2.0.4/30` and B is configured with `area 0.0.0.1 range 10.2.0.0/29` a
blackhole is created on B (`blackhole 10.2.0.0/29 proto zebra`). When the
area/range is removed via the command line, the blackhole remains in existence
even though the "range" route is removed from area 0 and the individual routes
are propagated.
PATCH
The reason for this behavior is that, prior to this patch, the range is deleted
from the area's list, so when ospf_abr_manage_discard_routes() gets called,
there is nothing to clean up. The patch removes the discard route as part of
the processing of the command line (ospf_area_range_unset()).
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
OVERVIEW
The checksum used in OSPF (rfc2328) is specified in rc905 annex B. There is an
sample implementation in rfc1008 which forms the basis of the quagga
implementation. This algorithm works perfectly when generating a checksum;
however, validation is a bit problematic.
The following LSA (generated by a non-quagga implementation) is received by
quagga and marked with an invalid checksum; however, it passes both the rfc905
and rfc1008 validation checks.
static uint8_t lsa_10_121_233_29[] = {
0x0e, 0x10, 0x02, 0x03,
0x09, 0x00, 0x35, 0x40,
0x0a, 0x79, 0xe9, 0x1d,
0x80, 0x00, 0x00, 0x03,
0x00, 0x8a, 0x00, 0x1c,
0xff, 0xff, 0xff, 0xe0,
0x00, 0x00, 0x36, 0xb0
};
LS Type: Summary-LSA (IP network)
LS Age: 3600 seconds
Do Not Age: False
Options: 0x02 (E)
Link-State Advertisement Type: Summary-LSA (IP network) (3)
Link State ID: 9.0.53.64
Advertising Router: 10.121.233.29 (10.121.233.29)
LS Sequence Number: 0x80000003
LS Checksum: 0x008a
Length: 28
Netmask: 255.255.255.224
Metric: 14000
You'll note that one byte of the checksum is 0x00; quagga would calculate the
checksum as 0xff8a.
It can be argued that the sourcing implementation generates an incorrect
checksum; however, rfc905 indicates that, for 1's complement arithmetic, the
value 255 shall be regarded as 0, thus either values are valid.
EXPLANATION
The quagga ospfd and ospf6d implementations operate by copying the PDU's
existing checksum in a holding variable, calculating the checksum, and comparing
the resulting checksum to the original. As a note, this implementation has the
side effect of modifying the contents of the PDU.
Evaluation of both rfc905 and rfc1008 shows that checksum validation should
involve calculating the sum over the PDU and checking that both resulting C0 and
C1 values are zero. This behavior is enacted in the rfc1008 implementation by
calling encodecc with k = 0 (checksum offset); however, this functionality had
been omitted from the quagga implementation.
PATCH
This patch adds the ability to call the quagga's fletcher_checksum() with a
checksum offset value of 0xffff (aka FLETCHER_CHECKSUM_VALIDATE) which returns
the sum over the buffer (a value of 0 indicates a valid checksum). This is
similar to the mechanism in rfc1008 when called with k = 0. The patch also
introduces ospf_lsa_checksum_valid().
ospf6d had it's own implementation of the fletcher checksum in
ospf6_lsa_checksum(); it's the same algorithm as in fletcher_checksum(). This
patch removes the local implementation in favor of the library's as well as creates
and uses ospf6_lsa_checksum_valid().
quagga's ISIS implementation suffers from the same problem; however, I do not
have the facilities to validate a fix to ISIS, thus this change has been left to
the ISIS maintainers. The function iso_csum_verify() should be reduced to
running the fletcher checksum over the buffer using an offset of 0.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Nolan Leake <nolan@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Make static routes respect non-default routing tables.
BEFORE PATCH
------------
! in zebra.conf
table 1
! add static route
vtysh> ip route 10.0.0.0/30 eth0
cumulus@net-top0:~$ ip route
default via 192.168.0.2 dev eth0
10.0.0.0/30 dev eth0 proto zebra
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
! nothing in table 1
cumulus@net-top0:~$ ip route show table 1
AFTER PATCH
-----------
! in zebra.conf
table 1
! add static route
vtysh> ip route 10.0.0.0/30 eth0
cumulus@net-top0:~$ ip route
default via 192.168.0.2 dev eth0
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
! static route in table 1
cumulus@net-top0:~$ ip route show table 1
10.0.0.0/30 dev eth0 proto zebra
Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This reverts commit 9289c6ff55cd96c943d23e43fc9e5f987aa965ed.
The commit reverted an earlier change which was fixed a bug that caused
black-holes to remote destinations with multiple paths, that could occur
during convergence. Overall, the previous code is more correct.
|
|
* lib/table.[ch]
- Add a function (route_table_get_next()) to get the route_node in
a tree that succeeds a given prefix in iteration order.
This allows one to reliably walk nodes in a tree while allowing
modifications, and is useful for achieving scale and
performance. Other approaches are also possible -- the main plus
point of this one is that it does not require any state about
the walk to be maintained in the table data structures.
- Add an iterator for walking the nodes in a tree. This introduces
a new structure (route_table_iter_t) and the following main
functions.
route_table_iter_init()
route_table_iter_pause()
route_table_iter_next()
route_table_iter_cleanup()
The iterator normally uses node pointers and the existing
route_next() function to walk nodes efficiently. When an
iteration is 'paused' with route_table_iter_pause(), it stores
the last prefix processed. The next call to
route_table_iter_next() transparently invokes
route_table_get_next() with the prefix to resume iteration.
* bgpd/bgp_table.[ch]
Add wrappers for the new table features described above.
* tests/table_test.c
Add tests for the new table code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Make the BGP table code a thin wrapper around the table implementation
in libzebra.
* bgpd/bgp_table.[ch]
- Use the ROUTE_NODE_FIELDS macro to embed the fields of a
route_node in the bgp_node structure.
- Add a route_table field to the bgp_table structure.
Initialize the route_table with a delegate, such that the nodes
in the table are bgp_node structures.
- Add inline wrappers that call route_table functions underneath,
and accept/return the correct BGP types.
* bgpd/bgp_route.c
Change some code to use inline wrappers instead of accessing
fields of nodes/tables directly. The latter does not always work
because the types of some fields need to be translated now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/table.[ch]
- Add a macro (ROUTE_NODE_FIELDS) that expands to all the fields
of a route_node structure.
- Add the route_table_delegate_t structure, a function vector
which allows clients to customize the behavior of one or more
tables.
The delegate currently contains the 'create_node' and
'destroy_node' functions, and hence enables a table to use an
alternative node structure. The alternative node is expected to
embed the fields of a route_node using ROUTE_NODE_FIELDS.
- Add route_table_init_with_delegate() to create a new table with
a given delegate.
- Make route_table_init() a thin wrapper around
route_table_init_with_delegate(). The delegate it passes in
simply creates/destroys route_node structures as before.
- Add a user data pointer (info) to the route_table
structure. This can be used by a client to keep per-table state.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/table.c
- Maintain table node count. Expose it via the route_table_count()
function (from revision cbdfbaa5).
- route_unlock_node(): Add assertion (from revision 228da428).
- route_table_free(): Make static and fix up cleanup code (from
revision 228da428).
- route_node_delete(): Change to be static.
- Add 'const' qualifier in a couple places.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
extract.pl should invoke the C preprocessor for the target system, not the
host.
* vtysh/extract.pl.in: use @CPP@ to get target cpp
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ripd_create_socket() failed in bind() on Mac OS X 10.7 since there was garbage
in unused fields of struct sockaddr_in.
* ripd/ripd.c: zero out struct sockaddr_sin from before filling.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Fix the "BSD struct ip_mreq hack" autoconf test to work with OpenBSD.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This corrects the parameters passed to libtool when linking
the shared libraries. The paramter name is -version-info not
-version.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The patch in bug 330 did two things. It add a return value
whether ospf_nexthop_calculation() failed or not and also
moved the return stmt for 16.1.1 para 5 so now SPF
will fallback to the intervening router when no back links are found
by 16.1.1 para 5. This is wrong and can potentially create black holes
or routing loops according to Dave Katz and Acee Lindem at ospf@ietf.org
Even if the current code could be proved to be harmless in all cases,
it adds substantial extra processing and memory allocations.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
OSPF really needs to specify interface in its routes. Otherwise
ospf may change the wrong route.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
[fixed up some whitespace errors, split patch in two]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Actually implement the IPV4_IFINDEX nexthop type that has been drifting
around as a definition forever (without any warning about it being a
placeholder).
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This is better than a prefix lookup as prefixes may not be
unique, that is, the same prefix can exist on several interfaces.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Maintain router LSA positions in OSPF interface.
Find the OSPF interface in nexthop_calculation using
the position in the router LSA. This is possible because
the only time nexthop_calculation needs to look up interfaces
is when dealing with its own Router LSA.
This has the following advantages:
- Multiple PtP interfaces with the same IP address between two routers.
- Use Unnumbered PtP on just one end of the link.
- Faster OI lookup for the OSPF interface and only
done once for PtoP links.
*ospf_interface.h: (struct ospf_interface) Add storage for
storing router LSA position.
*ospf_interface.c: (ospf_if_lookup_by_lsa_pos)
lookup OSPF I/F in an area using LSA position.
*ospf_lsa.c: (router_lsa_link_set) record Router LSA position.
*ospf_spf.c: (ospf_spf_next) Count and pass along lsa position.
(ospf_nexthop_calculation) Add lsa position argument.
call ospf_if_lookup_by_lsa_pos() for OSFP interface handle.
Clean up and remove all calls ospf_if_is_configured() the
rest. Adjust a few debug logs.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This was found in scale testing at OSR; ospfd is adding the same link
over and over again to the SPF tree. This fix prevents the resulting
memory corruption from happening and adds a debug message to track
occurence of this issue and/or confirm a proper fix.
(This version was improved by Scott Feldman over the earlier RFC.)
* ospfd/ospf_spf.c: (ospf_spf_add_parent) loop over existing vertices
and refuse to add duplicates.
Tested-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This makes it possible to have both "show babel route A.B.C.D/M"
and "show babel route X:X::X:X/M" commands at the same time without
the parser complaining about ambiguity.
* lib/command.c: only accept STATE_DOT after : was seen.
Reported-by: Juliusz Chroboczek <jch@pps.jussieu.fr>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
isisd got the include directory wrong on building with a separate build
directory.
* configure.ac: adjust ISIS_TOPOLOGY_INCLUDES
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
zebra address bookkeeping is a mess. this is just a workaround to have
IPv4 address deletion somewhat working on Linux.
the if_unset_prefix call is synchronous, when it returns success the
address deletion completed successfully. this is either signaled by a
netlink ACK or by an OK return value from ioctl().
This version is wrapped by #ifdef HAVE_NETLINK so we don't touch the
BSDs for now.
* zebra/interface.c: On Linux, update zebra internal state after
deleting an address.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This change adds a --with-pkg-extra-version option to ./configure to allow
packagers and distributions to fine tune the version displayed to the end
user to assist in support. It is also very useful when reporting bugs on
the official Quagga mailing lists.
There are two ways of utilsing this functionality:
a) ./configure --with-pkg-extra-version=-wmo1
b) EXTRAVERSION=-wmo1 ./configure
The latter is a common way for many distributions to add extra version
strings to signify their own patch level to a given package.
Also, minor whitespace fix in configure summary.
Signed-off-by: Joachim Nilsson <joachim.nilsson@westermo.se>
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
|
|
|
|
|
|
Only implement ospfv3NbrStateChange and ospfv3IfStateChange.
|
|
This includes:
- ospfv3AsLsdbTable
- ospfv3AreaLsdbTable
- ospfv3LinkLsdbTable
|
|
|
|
|
|
|
|
|
|
Use the real MIB from RFC 5643. Fix used ASN1 types. Indexes are not
exported any more (they are "no access"). Fix some endian
issues. Also, ID are just integers, not IPv4 addresses.
No additional OID are supported in this commit.
|
|
Most table handlers do not expect to be given an OID whose prefix is
outside what they can handle. This is not a problem with the SMUX
implementation since it always correct the OID such that the prefix
matches. However, this is not the case for the AgentX
implementation. A new function, smux_header_table() is used to do this
normalization.
|
|
|
|
smux_trap() signature has been changed to provide appropriate level
information to send SNMPv2 notifications. This includes the addition
of the enterprise OID to use (from which is derived the SNMP trap OID)
and the MIB registry to locate the appropriate function for variable
bindings provided by the trap.
The SMUX implementation has been updated but ignore the provided
enterprise OID. Instead, it still uses the SMUX peer OID to keep
compatibility with previous versions of Quagga. The SMUX
implementation also ignores the provided MIB registry since it uses
smux_get() function to grab the appropriate values. This is not
possible with the AgentX implementation since there is no such
function provided by NetSNMP.
|
|
This element was not unused.
|
|
smux_trap() contains an argument whose use appears to be to set
sysUpTime.0/timestamp field in SNMP trap. However, this value is not
used in smux_trap(). Moreover, it is expected that this field is the
value of sysUpTime.0 when the trap was sent and not any other time
related to the trap. To avoid any confusion, we remove this field from
the signature of the function.
|
|
--enable-snmp will enable AgentX support in Quagga. SMUX is still here
and can be enabled with --enable-snmp=smux. AgentX support can be
enabled with "agentx" in configuration file. As for SMUX, this command
is not understood by vtysh. It can be disabled with "no agentx",
though there is no real use of this since this command cannot be used
with vtysh.
If "agentx" and "no agentx" command were added to vtysh, it would not
be possible to disable agentx support after enabling it because
NetSNMP does not expose the appropriate methods for this.
The internals of AgentX are hidden by NetSNMP. Therefore, we don't
have a file descriptor to add to the threading system. We do not have
the timers to set either. Therefore, the event loop is modified to
make use of snmp_select_info() from NetSNMP.
Traps are not supported yet.
|
|
lib/snmp.c gets OID related helper functions that can be used with
another SNMP interface. smux.h is cleaned of SMUX specific bits to
only expose functions that may be used by an alternative
implementation. We also do not redefine functions already present in
NetSNMP. Just use the appropriate headers.
|
|
The correct method to link to NetSNMP is to use net-snmp-config (which
is like pkg-config). Explicit link to libcrypto is also dropped
(NetSNMP libs are linked to libcrypto, no need to link Quagga to
it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a
bug in configure.ac, it was properly populated.
|
|
NetSNMP is the only SNMP implementation for Quagga. We don't need two
different symbols.
|
|
Some .h files in lib/ are autogenerated. The search path should
include the build directory and the source directory. They usually
match but sometimes, they may be different. For example:
$ mkdir build
$ cd build
$ ../configure
$ make
|
|
There was a "lsp->" missing before "level" in line 2416.
(introduced by git commit e38e0df)
Reported-by: Seblu <seblu@seblu.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The change from bgp_node_get() to bgp_node_lookup() broke aggregation.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Tested-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The timers are rearmed after events processing. After 6a4677b7 we
do not generate events that can rearm the holdtime timer.
Fix it's to call bgp_timer_set() directly as it's done from bgp_event().
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Tested-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
BGP tests had been broken by auto-creation of listen socket. This allows
them to run at least, though at least 1 test seems to have other breakage,
aspath_test.
|
|
* bgpd.h: add a BGP_OPT_NO_LISTEN option for the master BGP configuration,
to prevent any listen socket being created automatically. Allows code
to be used outside of BGP daemon settings.
* bgpd.c: (bgp_get) honour above the flag, suppress auto-creation of listen
socket on first BGP instance if set.
(bgp_option_set) whitelist BGP_OPT_NO_LISTEN
|
