Age | Commit message (Collapse) | Author |
|
lib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*
definitions extended by else clause.
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
|
|
New clause 'match probability <percentage value>'
was added in route-maps (bgpd/bgp_routemap.c modified).
|
|
* ospf6_network.[ch]
* ospf6_sso(): new function supersedes ospf6_join_allspfrouters(),
ospf6_leave_allspfrouters(), ospf6_join_alldrouters() and
ospf6_leave_alldrouters()
* ospf6_interface.c
* ospf6_interface_state_change(): update respectively
* interface_up(): ditto
* interface_down(): ditto
|
|
and use VTY_GET_INTEGER_RANGE instead of calling strtoul
|
|
Second patch replaces "VTY_GET_LONG ("AS", as_ul, arg);"
by "VTY_GET_INTEGER_RANGE ("AS", as, arg, 1, BGP_AS4_MAX);"
as done in all other code, which parses AS numbers.
|
|
ospf6_routemap_rule_match_interface* was imported from ospfd
daemon with minor changes. new CLI options defined.
`ospf6_routemap_rule_match_interface' was changed to support
IPv6 (ospfv3) route's external information.
|
|
|
|
AS_PATH is a well-known, transitive path attribute and cannot be flagged
as "Partial". This is what commit
77a20b8af32c926176f8492a086d9e4ec670496b implemented, but it did not
account, that bgp_attr_aspath() is also used to process AS4_PATH, which
is an optional, transitive path attribute and as such may be flagged as
"Partial". This change justfies the test condition.
|
|
* bgp_attr.c (bgp_attr_originator_id, bgp_attr_cluster_list): use
bgp_notify_send_with_data()
|
|
|
|
|
|
* bgp_attr.c
* attr_flag_str: new message list
* bgp_attr_flags_diagnose(): new function, implements previously added
error logging in a generic way
* bgp_attr_origin(): use bgp_attr_flags_diagnose()
* bgp_attr_nexthop(): ditto
* bgp_attr_med(): ditto
* bgp_attr_local_pref(): ditto
* bgp_attr_atomic(): ditto
* bgp_attr_originator_id(): ditto
* bgp_attr_cluster_list(): ditto
* bgp_mp_reach_parse(): ditto
* bgp_mp_unreach_parse(): ditto
|
|
|
|
* bgp_attr.c
* bgp_attr_aggregator(): check Optional/Transitive flag bits
|
|
|
|
|
|
|
|
|
|
If the vty_serv_sock_addrinfo is being used, then vty_serv_sock_family
is unsed. Fix by adjusting ifdef/else/endif
|
|
* ospf6_message.h
* OSPF6_MESSAGE_TYPE_CANONICAL(): dismiss
* OSPF6_MESSAGE_TYPE_NAME(): dismiss
* ospf6_message.c
* ospf6_message_type_str: rewrite as a message list, add max value
* ospf6_packet_examin(): update to use LOOKUP()
* ospf6_receive(): idem
* ospf6_send(): idem
|
|
* if.c
* if_dump(): 'node', 'c'
* distribute.c
* distribute_list_all(): 'dist'
* distribute_list(): 'dist'
* districute_list_prefix_all(): 'dist'
* if_rmap.c
* if_rmap(): 'if_rmap'
* vty.c
* vty_accept(): 'vty'
|
|
|
|
getaddrinfo returns a list of socket parameters for listening. it
will contain both IPv4 and IPv6 listening sockets. unless we use
IPV6_V6ONLY on the IPv6 ones, only the socket listed first will
work. if the IPv4 one came first, the IPv6 one would get an
"Address in use" error.
this functionality was already present for bgpd and its listening
sockets. as it is needed for vtys as well, make it a common helper.
|
|
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
|
|
redistribute is currently limited to "known" protocols. there is no
reason for this limitation, so, remove it.
|
|
adding protocols and forgetting to update zebra_rib.c currently causes
a beyond end of array access for the default distance value. fix by
making 150 the default distance for unknown routing protocols.
150 is higher than all other IGPs but lower than iBGP (200)
|
|
MALLOC/REALLOC aren't used properly (no rpl_malloc), remove them
while at it, infer some sane ipforwarding method from the OS value.
(v2 on that, "==" is not a proper operator for standard "test")
|
|
* kernel_socket.c: (ifm_read) The reorganization from commit
6fe70d1b35c189cb1e488b2c26551ba7baac6148 removed setting the
interface link-layer socket address structure on routing socket
platforms. This restores saving the link-layer information because
it might be used elsewhere: rtm_write() when no gateway is given,
if_dump_vty() and rtadv_send_packet().
|
|
bgp_bind_address is replaced with sockunion_bind.
|
|
if update-source was given as interface name, bgpd was unconditionally
trying to bind to an IPv4 address from that interface.
change function to find the best-matching (number of address bits)
same-family address on the interface.
|
|
prefix2sockunion converts a struct prefix* to a union sockunion *;
prefix_common_bits counts the number of common bits in the prefix's
address part.
|
|
|
|
To set the TOS bits on TCP connections, platforms that restrict
capabilities need the priv level to be raised before the sockopt
is set, and this requires the ZCAP_NET_ADMIN priv.
* bgp_main.c: update _caps_p to include ZCAP_NET_ADMIN
* bgp_network.c
* bgp_connect(): request ZPRIVS_RAISE/ZPRIVS_LOWER
* bgp_listener(): request ZPRIVS_RAISE earlier
|
|
Make ospf_flood() propagate error returned by ospf_lsa_install() further
to properly discard the malformed LSA, not just prevent the immediate
crash.
|
|
|
|
Commit 05a4936b713b9882171d0f7fb20b8439df23939e fixed some of the
attributes involved, but not all. This commit should do it.
* bgp_attr.c
* bgp_attr_originator_id()
* bgp_attr_cluster_list()
* bgp_mp_reach_parse()
* bgp_mp_unreach_parse()
|
|
|
|
|
|
As long as ospf6_packet_examin() is now the single checkpoint for
received packets, most of the old checks performed elsewhere can
be converted into assert() constructs. Malformed input data at
respective points can be attributed solely to a programming error,
not a malformed packet.
* ospf6_message.c
* ospf6_hello_print()
* ospf6_dbdesc_print()
* ospf6_lsreq_print()
* ospf6_lsupdate_print()
* ospf6_lsack_print()
* ospf6_hello_recv()
* ospf6_dbdesc_recv_master()
* ospf6_dbdesc_recv_slave()
* ospf6_lsreq_recv()
* ospf6_lsupdate_recv()
* ospf6_lsupdate_recv()
* ospf6_lsack_recv()
* ospf6_receive()
|
|
* zebra_routemap.c: (route_set_src) get rid of the dummy family variable.
|
|
* doc/Makefile.am: pdf target needs to depend on all the input files.
|
|
Older versions of Quagga/Zebra would output a value in MRT table
dump files for "uptime" aka "ORIGINATED" that was a WALL clock
value. Given that uptime is now internally a bgp_clock MONOTONIC
value, the output in the MRT files is showing up as monotonic.
Note: time of MRT dump is still recorded correctly as a
time() based value, so we haven't lost that value.
Proposal is to correct the uptime output on the vty and in the
MRT files to again display something more akin to WALL time.
* bgp_dump.c: (bgp_dump_routes_func) add conditional correction
* bgp_route.c: (route_vty_out_detail) make correction conditional, move
variable declaration to beginning of the function
|
|
Doesn't ripng needs same fix as ripd.
|
|
|
|
The function is implemented in ospf_lsa.c, move its "extern" declaration
to ospf_lsa.h for consistency.
|
|
* bgp_attr.[ch]
* bgp_mp_reach_parse(): add extra arguments and a uniform flag
check block
* bgp_mp_unreach_parse(): idem
* bgp_attr_parse(): provide extra arguments
* bgp_mp_attr_test.c
* parse_test(): justify respective calls
|
|
* bgp_attr.c
* bgp_attr_parse(): provide extra argument to bgp_attr_aggregator()
* bgp_attr_local_pref(): use bgp_notify_send_with_data()
* bgp_attr_atomic(): idem
* bgp_attr_aggregator(): idem
|
|
|