summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* zebra.h: BSD BYTE_ORDER define isn't available everywhere, define if needs be. * checksum.h: new file. checksum.c exports in_cksum, provide a header for it. * checksum.c: (in_cksum) callers shouldn't have to know it uses a u_short internally, change to void *. * Makefile.am: Add checksum.h * command.h: remove bogus trailling slash. * md5.c: (general) Update it for the twentieth century. ANSI declarations are widely supported now.. Don't include system headers, only include zebra.h. Use POSIX types (the alternative is to define u_int64_t in a portable way - rest of Quagga needs same cleanup). Make endian-conditional code be compiler conditional rather than preprocessor conditional, so that breakage gets noticed quicker. * md5.h: POSIX types. Get rid of the odd __P() non-ANSI capable compiler compatibility hack.
2005-10-302005-10-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripd.c: (rip_response_process) Instead of calling rip_interface.c:if_valid_neighbor(), call the equivalent library function if_lookup_address(). * rip_interface.c: (if_valid_neighbor) Remove function, since it is essentially equivalent to the if_lookup_address() library function. * ripd.h: (if_valid_neighbor) Remove function declaration.
2005-10-292005-10-29 Paul Jakma <paul@dishone.st>paul
* ospfd.texi: Document the new spf and max-metric commands, and the additional form of dead-interval. Add documentation for various other commands. Cleanup misc stuff, citations, etc. Add some example configurations. * overview.texi: RFC3137 support added. * Makefile.am: Make quagga.pdf depend on the _TEXINFOS variable, this still doesn't fix the dependency though, sadly.
2005-10-292005-10-29 Paul Jakma <paul.jakma@sun.com>paul
* (general) RFC3137 stub-router support * ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define. (struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for options, to allow shutdown to distinguish between complete shutdown and shutdown of a subset of ospf instances. (struct ospf) Add stub_router_{startup,shutdown_}time, configuration of startup and shutdown time for stub-router. Add t_graceful_shutdown struct thread, timer for graceful shutdown, if needed. (struct ospf_area) Add stub_router_state - run time state of stub-router for an area. Add flags for ADMIN, IS and WAS states. Add t_stub_router, timer thread to resend router-lsa for an area. * ospf_lsa.c: (ospf_link_cost) new simple function to spit out either the given lnks cost or infinite cost if stub-router is in effect. (lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use previous function for transit-links. (ospf_stub_router_timer) timer thread for end of startup stub router. Change state as required for the area and setup re-origination of router-lsa. (ospf_stub_router_check) Check/do whether stub-router should be enabled, and whether it requires timer to be setup. (ospf_router_lsa_new) call previous function at top. (ospf_router_lsa_originate) no external callers, made static. * ospf_lsa.h: (ospf_router_lsa_originate) removed. * ospf_main.c: (sigint) make static. remove call to exit, as ospf_terminate now deals with exiting. * ospf_route.c: (ospf_terminate) removed, now in ospfd.c. * ospf_vty.c: (show_ip_ospf_area) print out state of stub-router, if active. (show_ip_ospf) print out configuration of stub-router support, and details of graceful-shutdown if the timer is active. ((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new commands to (de-)?configure stub-router support. (config_write_stub_router) write out config of stub-router. (ospf_config_write) call previous. (ospf_vty_init) install the new stub-router commands. * ospfd.c: various functions made static. (ospf_new) Set defaults for stub-router. Graceful shutdown is made to default on, just to be adventerous. (ospf_graceful_shutdown_finish) new function, final part of shutdown. (ospf_graceful_shutdown_timer) timer thread wrapper for graceful-shutdown. (ospf_graceful_shutdown_check) check whether to setup timer for shutdown or proceed directly to final shutdown. (ospf_terminate) moved here from ospf_route.c, call ospf_finish for each instance. (ospf_finish) renamed to ospf_finish_final and made static. (ospf_finish) new function, exported wrapper around ospf_graceful_shutdown_check. (ospf_finish_final) complete shutdown of an instance. Add missing TIMER_OFF's of two timer threads. (ospf_area_free) opaque self lsa timer should be turned off.
2005-10-282005-10-28 Paul Jakma <paul.jakma@sun.com>paul
* Makefile.am: Add rip_interface.h, or else it doesn't get included in dists.
2005-10-262005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* command.c: Use MTYPE_HOST, MTYPE_STRVEC. Some other fixups, including fixing some likely leaks in config_write_file. * vty.c: memory macro usage fixes. (vty_read_config) fix leak where relative config file is specified.
2005-10-262005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* (general) Cleanup a some calls to XFREE,strdup, etc. to use the memory.h macros. * memtypes.c: Add MTYPE_IF_RMAP_NAME, MTYPE_PQUEUE, MTYPE_PQUEUE_DATA and MTYPE_HOST. * memtypes.h: update auto-built file. * if_rmap.c: Use MTYPE_IF_RMAP_NAME. * pqueue.c: Use the two MTYPE_PQUEUE mtypes for allocations.
2005-10-252005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: Update couple more functions to specify void explicitely.
2005-10-252005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* (general) static/extern functions and definitions. * rip_interface.h: new file, export the public functions from rip_interface.c
2005-10-232005-10-23 Paul Jakma <paul.jakma@sun.com>paul
* ospf_apiserver.c: (ospf_apiserver_term) This function should not have side-effects (eg segv) if no apiserver instances are active, ie be robust.
2005-10-232005-10-23 Paul Jakma <paul.jakma@sun.com>paul
* ospf_vty.c: (show_ip_ospf) fix display of SPF timer if it has not yet been run.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* ospf_dump.c: (ospf_timeval_dump) fix ms adjustment, thanks to Andrew Schorr. * ospf_vty.c: (ospf_config_write) fix write out of spf timers configuration.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) SPF millisecond resolution timer with adaptive, linear back-off holdtime. Prettification of ospf_timer_dump. * ospf_dump.c: (ospf_timeval_dump) new function. The guts of ospf_timer_dump, but made to be more dynamic in printing out the relative timeval, sliding the precision printed out according to the value. (ospf_timer_dump) guts moved to ospf_timeval_dump. * ospf_dump.h: export ospf_timeval_dump. * ospf_flood.c: (ospf_flood) remove gettimeofday, use the libzebra exported recent_time instead, as it's not terribly critical to have time exactly right - the dropped LSA will be retransmited to us if we don't ACK it. * ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're not transmitting, just putting LSA back on update transmit list. * ospfd.h: delay and holdtimes should be unsigned. Add spf_max_holdtime and spf_hold_multiplier. Update default defines for delay and hold time to be in msec. (struct ospf) change the SPF timestamp to a struct timeval. Remove ospf_timers_spf_(un)?set. * ospfd.c: (ospf_timers_spf_{set,unset}) removed. (ospf_new) initialise spf_max_holdtime and spf_hold_multiplier * ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval now, update with gettimeofday. (ospf_spf_calculate_schedule) Change SPF timers to millisecond resolution. Make the holdtime be adaptive, with a linear increase in holdtime ever consecutive SPF run which occurs within holdtime of previous SPF, bounded by spf_max_holdtime. * ospf_vty.c: Update spf timers commands. (ospf_timers_spf_set) trivial helper. (ospf_timers_throttle_spf_cmd) new command to set SPF delay, initial hold and max hold times with millisecond resolution. (ospf_timers_spf_cmd) Deprecated. Accept the old values, convert to msec, truncate to new limits. (no_ospf_timers_throttle_spf_cmd) set timers to defaults. (no_ospf_timers_spf_cmd) deprecated form, same as previous. (show_ip_ospf_cmd) Display SPF parameters and times. (show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne' header. (show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of the multiple spaces which were making the lines even longer. (show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header (show_ip_ospf_neighbor_all_cmd) ditto and fix the field widths for NBMA neighbours. (show_ip_ospf_neighbor_int) Use header function. (show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf, local array - safer. (show_ip_ospf_neighbor_detail_sub) ditto (ospf_vty_init) install the new SPF throttle timer commands.
2005-10-212005-10-20 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* sockopt.c: (setsockopt_multicast_ipv4) If IP_ADD_MEMBERSHIP fails with errno equal to EADDRINUSE, then issue an info message and try IP_DROP_MEMBERSHIP followed by IP_ADD_MEMBERSHIP.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) OSPF fast, sub-second hello and 1s dead-interval support. A warning fix. Millisec support for ospf_timer_dump. Change auto-cost ref-bandwidth to add a comment to write out of config, rather than printing annoying messages to vty on startup. * ospf_dump.c: (ospf_timer_dump) Print out milliseconds too. Callers typically specify a length of 9, so most see millisecs unless they specify the additional length. * ospf_interface.h: (struct ospf_interface) new interface param, fast_hello. * ospf_interface.c: (ospf_if_table_lookup) add brackets, gcc warning fix. (ospf_new_if_params) Initialise fast_hello param. (ospf_free_if_params) Check whether fast_hello is configured. (ospf_if_new_hook) set fast_hello to default. * ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to prevent funny side-effects from its if statement when this macro is used conditionally by other macros. (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds. (OSPF_HELLO_TIMER_ON) new macro to set hello timer according to whether fast_hello is set. * ospf_ism.c: Update all setting of the hello timer to use either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The former is used when hello is to be sent immediately. * ospf_nsm.c: ditto * ospf_packet.c: (ospf_hello) hello-interval is not checked for mismatch if fast_hello is set. (ospf_read) Annoying nit, fix "no ospf_interface" to be debug rather than a warning, as it can be perfectly normal to receive packets when logical subnets are used. (ospf_make_hello) Set hello-interval to 0 if fast-hellos are configured. * ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying nit, don't vty_out if this command is given, it gets tired quick. (show_ip_ospf_interface_sub) Print the hello-interval according to whether fast-hello is set or not. Print the extra 5 millisec characters from (ospf_timer_dump) if fast-hello is configured. (ospf_vty_dead_interval_set) new function, common to all forms of dead-interval command, to set dead-interval and fast-hello correctly. If a dead-interval is given, unset fast-hello, else if a hello-multiplier is set, set dead-interval to 1 and fast-hello to given multiplier. (ip_ospf_dead_interval_addr_cmd) use ospf_vty_dead_interval_set(). (ip_ospf_dead_interval_minimal_addr_cmd) ditto. (no_ip_ospf_dead_interval) Unset fast-hello. (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval should set it to OSPF_HELLO_INTERVAL_DEFAULT, not OSPF_ROUTER_DEAD_INTERVAL_DEFAULT. (config_write_interface) Write out fast-hello. (ospf_config_write) Write a comment about "auto-cost reference-bandwidth" having to be equal on all routers. Hopefully just as noticeable as old practice of writing to vty, but less annoying. (ospf_vty_if_init) install the two new dead-interval commands. * ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL and OSPF_FAST_HELLO_DEFAULT.
2005-10-202005-10-20 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* memory.c: (show_memory_vty) Omit zero statistics. Print separators only if some non-zero stats have been printed in between. (show_separator) New function to print a separator. (show_memory_all) Keep track of whether a separator is needed between the different memory statistics groups.
2005-10-192005-10-17 Vincent Jardin <vincent.jardin@6wind.com>jardin
* ripd.c: rip_create_socket() for each packet, it does not bind to the proper interfaces because we forget to use the from address when it is specified.
2005-10-182005-10-18 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* memtypes.h: Add MTYPE_OSPF_VERTEX_PARENT (to match memtypes.c).
2005-10-182005-10-18 Paul Jakma <paul.jakma@sun.com>paul
* (general) SPF memory management cleanup and fix for rare double-free bug. * ospf_spf.h: (struct vertex_parent) New struct to hold parent specific data, eg the backlink and the parent vertex pointer, and point to the appropriate general struct vertex_nexthop. (struct vertex_nexthop) remove parent vertex pointer, so this struct can be shared across vertices. (struct vertex) rename list child to list children. Remove list of nexthops, replace with list of vertex_parents. * ospf_spf.c: (update_stat) trivial, remove cast from void *. (vertex_nexthop_new) remove init of parent - field is gone from struct vertex_nexthop. (ospf_canonical_nexthops_free) Remove the canonical vertex_nexthop memory objects. These are the vertex_nexthops attached to the first level of router vertices from the root. (vertex_parent_new) new function, create a vertex_parent. (vertex_parent_free) ditto, but free it. (ospf_vertex_new) Update to match changes to struct vertex. (ospf_vertex_free) Recursively free a struct vertex and its children. The parent list is used as a reference count. vertex_nexthops must be free seperately, if required. (ospf_vertex_dump) update to match struct vertex changes. Print out backlink of parents too. (ospf_vertex_add_parent) ditto. (ospf_lsa_has_link) update comment. (ospf_nexthop_add_unique) removed, not needed anymore. (ospf_nexthop_merge) ditto. (ospf_spf_consider_nexthop) renamed to ospf_spf_add_parent. Simplified to just create vertex_parent and add it. (ospf_spf_flush_parents) new function, flush out the parent list. (ospf_nexthop_calculation) Take the relevant route_lsa_link as an argument, which simplifies things and removes the need for the hack in ospf_nexthop_add_unique - ospf_spf_next already knew exactly which link the cost calculated was for. Update to match struct vertex changes too. (ospf_spf_next) Don't create a vertex for W unnecessarily, if it's there's a vertex already created for W, use it, and hence there's no need to free it either. Update some manipulation/comparisons of distance to match. Flush the parent list if a lower cost path is found. (ospf_spf_route_free) unused, removed. (ospf_spf_dump) match the struct vertex changes, and dump the ifname if possible. (ospf_spf_calculate) At end of SPF, free the canonical nexthops and call ospf_vertex_free on the root vertex to free the entire tree. * ospf_interface.c: (ospf_vl_set_params) match struct vertex changes. * ospf_route.c: (ospf_intra_route_add) ditto (ospf_route_copy_nexthops_from_vertex) ditto * memtypes.c: (memory_list_ospf) Add MTYPE_OSPF_VERTEX_PARENT.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* ospf_api.c: sign warnings. * ospf_apiserver.c: sign warning and convert all the struct in_addr initialisations so as not to make assumptions about how this struct is organised, initialise the s_addr member explicitely. * ospf_packet.c: Add const qualifier to auth_key.
2005-10-112005-10-11 Paul Jakma <paul@dishone.st>paul
* quagga.texi: Rejiggle the copyright sections a bit, seems to make makeinfo happier and generates info pages again on FC4. * quagga.info: Update this auto-built file.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* connected.{c,h}: (connected_{add,delete}_ipv4) label should be const qualified.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* test-privs.c: Privileges unit test. * Makefile.am: build testprivs * aspath_test.c: fix a few sign warnings
2005-10-062005-10-06 Alain Ritoux <alain.ritoux@6wind.com>vincent
* ospf_snmp.c: Avoid mixing interface and ospf_interface objects which now allows snmpwalk to work with ospfIfTable and also with ospfIfMetricTable
2005-10-062005-10-06 Alain Ritoux <alain.ritoux@6wind.com>vincent
* rip_interface.c: Now the command "no ip rip split-horizon poisoned-reverse" just inhibates the poisoned-reverse effects but keep spli-horizon activ.
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* rt_netlink.c: (netlink_request) Use memset to clear structure before calling sendto (eliminates a valgrind error message about uninitialized data).
2005-10-01 * isis_adjacency.c: Stop expire timer while deleting adjacency.hasso
* isis_events.c: Stop pseudo LSP thread while resigning circuit from level. * isis_route.c: Fix compiling with EXTREME_DEBUG. Mark route as not in sync with zebra if it's changed. * isis_spf.c: Schedule route validating etc even if tent was empty. It's probably because we just don't have any adjacencies. * isisd.c: Write minimum spf interval into configuration.
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* isis_route.c: fix EXTREME_DEBUG compilation
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* ospf_dump.c, ospf_ia.c, ospf_spf.c, ospf_ase.c: remove unused DEBUG
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* bgp_packet.c: fix compilation when DEBUG is used.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/smux.[ch]: allow to retreive global OID (identified by <0 namelen). * ospf_ism.c: generate SNMP traps on Interface state change * ospf_nsm.c: generate SNMP traps on Neighbour state change * ospf_snmp.[ch]: support for SNMP traps for interface and neighbours.
2005-09-292005-09-29 Paul Jakma <paul.jakma@sun.com>paul
* configure.ac: Add the test for Solaris least-privileges. Set defines for whether capabilities are supported and whether of the linux or solaris variety. Add missing-prototypes, missing-declarations, char-subscripts and cast-qual warnings to default cflags, cause Hasso enjoys warnings, and we really should clean the remaining ones up. (ie isisd..). * (*/*main.c) Update the zebra_capabilities_t arrays in the various daemons to match the changes made in lib/privs.h. * zebra.h: Solaris capabilities requires priv.h to be included. * privs.{c,h}: Add support for Solaris Least-Privileges. privs.h: Reduce some of the abstract capabilities, which do not have rough equivalents on both systems. Rename the net related caps to _NET, as they should have been in first place. (zprivs_terminate) should take the zebra_privs_t as argument so that it can update change pointer. Add an additional privilege state, ZPRIVS_UNKNOWN. * privs.c: (various capability functions) Add Solaris privileges variants. (zprivs_state) Use privs.c specific generic types to represent various capability/privilege related types, so that each can be typedef'd as appropriate on each platform. (zprivs_null_state) static added, to hold the state the null method should report (should be raised by default, and LOWERED if zprivs_terminate has been called) (zprivs_state_null) Report back the zprivs_null_state. (cap_map) Make it able to map abstract capability to multiple system capabilities. (zcaps2sys) Map to abstract capabilities to multiple system privileges/capabilities. (zprivs_init) move capability related init to seperate function, zprivs_caps_init. (zprivs_terminate) ditto, moved to zprivs_caps_terminate. Set the change_state callback to the NULL state, so the user can continue to run and use the callbacks.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* Of course ISM_SNMP MACRO mist be defined
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever cost is changed ( [no] ip ospf area XXX default-cost YYY) Support ignore-mtu option * ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT * ospfd/ospf_packet.c: support ignore-mtu option * ospfd/ospf_interface.h: field added for skipping MTU check * ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete() Set mtu_ignore field to default value * ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area() * ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP correct values * ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next() convert OSPFIFSTATE internal status into SNMP values
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/filer.c: show protocol name in filter_show() * lib/plist.c: show protocol name in vty_show_prefix_entry() * routemap.c: show protocol name in vty_show_route_map_entry() * lib/vty.c: in vty_command(), show protocol name if command unknown * zebra/zserv.c: Always provide distance fo route add * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance with RFC. Also PeerDomain is now set to a STRING type. * ripd/ripd.h: rip_redistribute_add() API includes metric and distance * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance Now allows a RIP-route to overcome a redistributed route coming from a protocol with worse (higher) administrative distance Metrics from redistribution are shown in show ip rip * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. provide distance and metric * ripd/rip_interface.c: adapt to the rip_redistribute_add() API * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage rather a CMD_WARNING, because set metric ius shared with other protocols using larger values (such as OSPF) The match metric action takes first external metric if present (from redistribution) then RIP metric.
2005-09-28 * *.c: Massive cleanup of lists loops. Stop abusing ALL_LIST_ELEMENTS.hasso
Replace XMALLOC + memset with XCALLOC. Fix some indentation issues. The only really significant change is simplified isis_delete_adj function in isis_adjacency.c.
2005-09-28 * isis_dynh.c, isisd.h: Implement dynamic hostname cache cleanup.hasso
* isis_lsp.c: Refresh dynamic hostname in the cache while refreshing topology LSP.
2005-09-28 * isis_lsp.c: Make topology generator generate TE TLVs if necessary.hasso
Also take care of inserting dynamic hostname of topology TLVs into cache.
2005-09-282005-09-28 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/md5-gnu.h: removed * lib/md5.h: replaces md5-gnu.h * lib/Makefile.am: use correct md5.h * lib/md5.c: import from WIDE * ospfd/ospf_packet.c: use new md5 API * ripd/ripd.c: use new md5 API
2005-09-28 * connected.c: flag connected_up_ipv6() and connected_down_ipv6()vincent
usage with HAVE_IPV6
2005-09-26 * isis_spf.c: Changing cost from uint16_t to uint32_t. Unsethasso
ISIS_ROUTE_FLAG_ACTIVE flag before running SPF. * isisd.[ch]: Separate route tables for different levels. SPF is done separately, but in case of L1L2 area they have to be merged. * isis_zebra.c: Set/unset ISIS_ROUTE_FLAG_ZEBRA_SYNC flag correctly in case of adding/removing IPv4 routes. * zebra_route.c: Rework route validating process. Merging L1 and L2 tables in case of L1L2 area. In short - many changes to make SPF work more correctly, add/remove to/from RIB also works now. It's still very far from perfect though.
2005-09-26 * isis_spf.[ch]: Added TE TLVs to the SPF process. It seems to workhasso
mostly, but needs certainly much more testing, especially transition situation.
2005-09-26 * isis_lsp.c: Put correct metric info into TE TLV's. Wide metric ishasso
used only if only wide metric style (extended TLV's) is in use.
2005-09-26 * isis_tlv.[ch]: New function tlv_add_in_addr() to put just one IPv4hasso
address into TLV. Used for IPv4 address TLV (in case of LSP) and TE router ID TLV. * isis_lsp.c: Use tlv_add_in_addr() and include router ID in LSP.
2005-09-26 * isis_lsp.c: Support for originating TE IS and IPv4 TLV's. No any subhasso
TLV handling yet.
2005-09-26 * isis_tlv.[ch]: Two new functions - tlv_add_te_is_neighs() andhasso
tlv_add_te_ipv4_reachs() to handle TLV's with new metric. None of them handle sub TLVs though for now.
2005-09-26 * isis_circuit.[ch]: Some preliminary support for specifying widehasso
circuit metrics. Needs more thinking though, but should do for now.
2005-09-26 * isisd.[ch]: Introduce oldmetric flag for area and transitionhasso
metricstyle command. With metricstyle wide only extended TLVs should be used.
2005-09-25 * dict.[ch]: Revert all nonfunctional changes. It's external modulehasso
imported from kazlib and it's better not to screw it - there is theoretical chance that we might want to merge changes from upstream at some point. Also avoid the loss of info about upstream version (rcsid).