| Age | Commit message (Collapse) | Author |
|---|
|
Experience with IPv4 counterpart of this function suggests, that
this way of type-punning is likely to cause errors.
|
|
|
|
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
This is needed to avoid stale routes in some cases; the regression was
introduced by commit 1d19234e79c77a7d55194b513f2a77c6a691bc2c.
* ospf6_spf.c: (ospf6_spf_calculation) Call ospf6_spf_table_finish()
before possibly returning if no router-LSA is found for the root of
the SPF tree.
|
|
This issue has been pointed out by Lou Berger and Tim Browski.
* bgp_packet.c
* bgp_route_refresh_receive(): restore if() condition, which was
broken by commit fdbc8e77c88f751924299d0bc752371d5cc31116
|
|
|
|
|
|
|
|
|
|
|
|
* ospf6_message.h
* OSPF6_MESSAGE_TYPE_CANONICAL(): dismiss
* OSPF6_MESSAGE_TYPE_NAME(): dismiss
* ospf6_message.c
* ospf6_message_type_str: rewrite as a message list, add max value
* ospf6_packet_examin(): update to use LOOKUP()
* ospf6_receive(): idem
* ospf6_send(): idem
|
|
As long as ospf6_packet_examin() is now the single checkpoint for
received packets, most of the old checks performed elsewhere can
be converted into assert() constructs. Malformed input data at
respective points can be attributed solely to a programming error,
not a malformed packet.
* ospf6_message.c
* ospf6_hello_print()
* ospf6_dbdesc_print()
* ospf6_lsreq_print()
* ospf6_lsupdate_print()
* ospf6_lsack_print()
* ospf6_hello_recv()
* ospf6_dbdesc_recv_master()
* ospf6_dbdesc_recv_slave()
* ospf6_lsreq_recv()
* ospf6_lsupdate_recv()
* ospf6_lsupdate_recv()
* ospf6_lsack_recv()
* ospf6_receive()
|
|
|
|
getaddrinfo returns a list of socket parameters for listening. it
will contain both IPv4 and IPv6 listening sockets. unless we use
IPV6_V6ONLY on the IPv6 ones, only the socket listed first will
work. if the IPv4 one came first, the IPv6 one would get an
"Address in use" error.
this functionality was already present for bgpd and its listening
sockets. as it is needed for vtys as well, make it a common helper.
Conflicts:
lib/sockunion.c
|
|
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
|
|
redistribute is currently limited to "known" protocols. there is no
reason for this limitation, so, remove it.
|
|
adding protocols and forgetting to update zebra_rib.c currently causes
a beyond end of array access for the default distance value. fix by
making 150 the default distance for unknown routing protocols.
150 is higher than all other IGPs but lower than iBGP (200)
|
|
MALLOC/REALLOC aren't used properly (no rpl_malloc), remove them
while at it, infer some sane ipforwarding method from the OS value.
(v2 on that, "==" is not a proper operator for standard "test")
|
|
* kernel_socket.c: (ifm_read) The reorganization from commit
6fe70d1b35c189cb1e488b2c26551ba7baac6148 removed setting the
interface link-layer socket address structure on routing socket
platforms. This restores saving the link-layer information because
it might be used elsewhere: rtm_write() when no gateway is given,
if_dump_vty() and rtadv_send_packet().
|
|
|
|
|
|
|
|
lib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*
definitions extended by else clause.
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
|
|
New clause 'match probability <percentage value>'
was added in route-maps (bgpd/bgp_routemap.c modified).
|
|
* ospf6_network.[ch]
* ospf6_sso(): new function supersedes ospf6_join_allspfrouters(),
ospf6_leave_allspfrouters(), ospf6_join_alldrouters() and
ospf6_leave_alldrouters()
* ospf6_interface.c
* ospf6_interface_state_change(): update respectively
* interface_up(): ditto
* interface_down(): ditto
|
|
and use VTY_GET_INTEGER_RANGE instead of calling strtoul
|
|
Second patch replaces "VTY_GET_LONG ("AS", as_ul, arg);"
by "VTY_GET_INTEGER_RANGE ("AS", as, arg, 1, BGP_AS4_MAX);"
as done in all other code, which parses AS numbers.
|
|
ospf6_routemap_rule_match_interface* was imported from ospfd
daemon with minor changes. new CLI options defined.
`ospf6_routemap_rule_match_interface' was changed to support
IPv6 (ospfv3) route's external information.
|
|
|
|
|
|
|
|
lib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*
definitions extended by else clause.
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
|
|
New clause 'match probability <percentage value>'
was added in route-maps (bgpd/bgp_routemap.c modified).
|
|
* ospf6_network.[ch]
* ospf6_sso(): new function supersedes ospf6_join_allspfrouters(),
ospf6_leave_allspfrouters(), ospf6_join_alldrouters() and
ospf6_leave_alldrouters()
* ospf6_interface.c
* ospf6_interface_state_change(): update respectively
* interface_up(): ditto
* interface_down(): ditto
|
|
and use VTY_GET_INTEGER_RANGE instead of calling strtoul
|
|
Second patch replaces "VTY_GET_LONG ("AS", as_ul, arg);"
by "VTY_GET_INTEGER_RANGE ("AS", as, arg, 1, BGP_AS4_MAX);"
as done in all other code, which parses AS numbers.
|
|
ospf6_routemap_rule_match_interface* was imported from ospfd
daemon with minor changes. new CLI options defined.
`ospf6_routemap_rule_match_interface' was changed to support
IPv6 (ospfv3) route's external information.
|
|
Make progname a string, and cast when calling asn1.
Remove variable set but never used.
|
|
The if_dump code had empty loop, that caused set-never-used warning.
|
|
ospf6 main always calls ospf6_exit() which always calls exit.
Use attributes to tell GCC that this is ok.
|
|
Check result of fgets(), and don't set variable that is
never used.
|
|
When doing valgrind testing, the privledges from zprivs_init() need
to be cleaned up on exit.
|
|
If the vty_serv_sock_addrinfo is being used, then vty_serv_sock_family
is unsed. Fix by adjusting ifdef/else/endif
|
|
The code for nssa_range and other bits that were written but
never used.
|
|
BGP was ignoring nexthop info for static and other redistributed
routes for IPv6. Build extra attribute info to store the nexthop.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=6073
|
