| Age | Commit message (Collapse) | Author |
|---|
|
* vtysh/Makefile.am: explicitely list the files required for
vtysh_cmd.c to be generated, to minimise spurious rebuilds.
|
|
* redhat/zebra.pam: Default to allow root
|
|
* bgp_vty.c: install the neighbor_set_peer_group_cmd,
neighbor_soft_reconfiguration_cmd and neighbor_unsuppress_map_cmd
family of commands into the VPNv4 address family config node.
|
|
* (global): Add/fixup NSSA ABR translation functionality
* ospfd.h: Adjust the NSSA ROLE defines. Rename STATE to TRANSLATE.
Rename the LSA_NSSA_GET define to LSA_OPTIONS_NSSA_GET.
* ospfd.c: Adjust to match changes to ospfd.h
* ospf_te.c: Adjust to match change to LSA_NSSA_GET.
* ospf_lsa.h: slights reformatting.
Add new NSSA functions, ospf_translated_nssa_compare() (not
currently used), ospf_translated_nssa_refresh() and
ospf_translated_nssa_originate().
* ospf_lsa.c: Implemented aforementioned new functions. Fix up
several NSSA hooks to /not/ be called for Type-5s which are
translated. Add additional hooks. Set the ROUTER_LSA_NT bit in
router-lsa flags if ABR does translation. New function,
ospf_lsa_translated_nssa_new() implemented. Dont register
translated LSAs for refreshing - instead we implicitly rely on
the ASBR refreshing the Type-7, and refresh the translated Type-5
at the same time. Some minor reformatting. Extra debug info added.
Also, existing debug statements modified to report LSA Id.
* ospf_flood.c: call ospf_translated_nssa_refresh() when refreshing
Type-7. minor reformatting.
* ospf_dump.c: Dump NSSA LSAs.
* ospf_asbr.h: slight reformatting. Export
ospf_external_route_lookup() (though, not used. probably will
undo this).
* ospf_abr.c: Slight reformatting in many places. Update to match
ospfd.h changes.
(ospf_abr_translate_nssa): make it work, using the new ospf_lsa
translation functions.
(Several places): change struct prefix * to struct prefix_ipv4 *.
(might as well do the casts at higher levels). Add more debug
info.
(ospf_abr_announce_stub_defaults): announce default to NSSA areas
too.
(ospf_abr_announce_nssa_defaults): do nothing. this function
probably should die. (see ospf_abr_announce_stub_defaults).
(ospf_abr_task_timer): run NSSA tasks.
|
|
* lib/command.c: Add missing HAVE_IPV6 defines.
see bug id #23: http://bugzilla.dishone.st/show_bug.cgi?id=23
|
|
* zebra/if_ioctl.c: Fix missing declaration for if_fake_index.
See bug id #24: http://bugzilla.dishone.st/show_bug.cgi?id=24
reported by Vsevolod Sipakov.
|
|
* ospf_apiserver.c: Add missing close bracket
|
|
* ospfd/ospf_apiserver.c: check for NULL from ospf_lookup()
|
|
* configure.ac: Fix recognition of FreeBSD if /dev/ip is found.
|
|
* zebra/kernel_socket.c: Update for new zebrad global struct
* zebra/ipforward_solaris.c: Add missing privs.h include. Uncomment
/dev/ip define.
* lib/zebra.h: Add typedefs for SunOS.
|
|
|
|
* (show_ip_ospf_database_header) Fix unconditional NSSA-dependent
printf.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) undo fix suggested
Mikael Lonnroth. As per Kamatchi Soundaram /
[zebra 19590], original behaviour is correct.
|
|
* ospf_vty.c: (global) add, unused, description array for lsa flags.
(show_ip_ospf_database_header): pretty print options, printf hex
numbers as 0x, print lsa flags and note if it is a translated LSA.
(show_lsa_detail_proc): print out OSPF_LSA_LOCAL_XLT LSAs.
* ospf_packet.c: (ospf_write) print out destination IP in debug info
if write fails.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) clean up list node
and unlock lsa if we break early. (eg packet size too large).
|
|
|
|
* ospf_vty.c (ospf_area_stub_no_summary): fix typo.
(ospf_area_nssa_cmd_handler): new function to handle the
area.*nssa commands.
(ospf_area_nssa_cmd): changed to call ospf_area_nssa_cmd_handler
(ospf_area_nssa_translate_cmd) ditto
(ospf_area_nssa_translate_cmd): changed from ALIAS to defun, call
ospf_area_nssa_cmd_handler
(ospf_area_nssa_translate_no_summary_cmd): ditto
(no_ospf_area_nssa_cmd): call ospf_schedule_abr_task()
(show_ip_ospf_area): Formatting cleanups. Properly print out NSSA
area configuration.
show_router_lsa_detail: Add missing newline
(show_network_lsa_detail): ditto
(show_summary_lsa_detail): ditto
(show_summary_asbr_lsa_detail): ditto
(show_ip_ospf_route_router): fix spacing
(config_write_ospf_area): actually write out proper state for NSSA
area.
|
|
* ospf_abr.c (ospf_abr_nssa_am_elected): new function.
Look through LSDB for an area and try determine whether other
routers are more 'electable' than this router. Presumes caller
has checked Role.
(ospf_abr_nssa_check_status): new function. check any NSSA related
status changes. At present determines NSSATranslatorState should
be enabled or disabled.
(ospf_abr_announce_network_to_area): remove the redundant
call to ospf_abr_announce_network_to_area() (as per Vadim,
[zebra 14710], problem 7).
(global): Update NSSATranslator to NSSATranslatorState as per
ospfd.h changes
(ospf_abr_announce_nssa_defaults): call
ospf_abr_announce_network_to_area() to inject default summaries.
(ospf_abr_nssa_task): undo commented out calls to
ospf_abr_prepare_aggregates() and ospf_abr_send_nssa_aggregates(),
if they're borked, lets fix them.
(ospf_abr_task): remove call to ospf_abr_nssa_task() - move this
to the timer scheduler.
(ospf_abr_task_timer): call ospf_abr_nssa_task() and
ospf_abr_nssa_check_status()
(misc): some minor reformatting.
|
|
* ospfd.c (ospf_area_nssa_set): Set defaults for NSSA Role, State
and Stability Interval and no_summary.
(ospf_area_nssa_translator_role_(un?)set): Update to
NSSATranslatorRole
|
|
* ospfd.h (struct ospf_area): remove NSSATranslator. Add
NSSATranslatorState and NSSATranslatorStabilityInterval (currently
not used).
(global): add OSPF_NSSA_TRANS_STABLE_DEFAULT, default for
NSSATranslatorStabilityInterval. Update the LSA_NSSA_GET to
reflect struct ospf_area changes.
|
|
* ospf_route.c: delete routes generated from AS-External routes if
there is a inter/intra route. Adds ospf_route_delete_same_ext()
which prunes external routes, which is called from
ospf_route_install() when new route table is installed.
|
|
* ospf_lsa.h: elaborate on comment for ROUTER_LSA_NT
add IS_ROUTER_LSA_NT macro.
|
|
* ospf_lsa.c (router_lsa_flags): Set the correct flags for
router-lsa's. Eg OSPF_FLAG_ASBR is /not/ an LSA flag, its an
internal ospfd flag (just happens to have same value as
ROUTER_LSA_EXTERNAL). Set ROUTER_LSA_EXTERNAL for ASBRs,
ROUTER_LSA_BORDER for ABRs and ROUTER_LSA_NT for NSSA ABRs which
are OSPF_NSSA_ROLE_ALWAYS translators.
|
|
* ospf_interface.c (ospf_vl_set_params): new router LSA is not
generated when the cost of the routing entry for the virtual
link endpoint has changed. If the cost to reach the virtual link's
endpoint has changed, add router LSA timer for the backbone area.
|
|
* ospf_dump.h: fix NSSA debug define
|
|
* *.texi: update the docs a bit. Add some info about
zebra.dishone.st in the overview. Add link-detect and update
static routes section in zebra. Add write-config in vtysh. Update
version handling and add passive-interface default for ripd.
|
|
* rip_interface.c: add 'default' to passive-interface command DEFUN
|
|
* ospf6d/ospf6_message.c: Change memcpy() to strcpy() to prevent
copying of extraneous junk - suggested by Anil Madhavapeddy
<anil@recoil.org> on bug-zebra@gnu.org.
|
|
* ospfd/ospf_zebra.c: Run it through indent -nut to fix the $%^@ing
annoying mix of tabs and spaces.
|
|
* ospfd/ospf_zebra.c: [zebra 19434] fix for disappearing OSPF routes
modify ospf_zebra_delete() to specify nexthop when deleting routes
with zebra.
|
|
* zebra/rt_netlink.c: Debug statements added to
netlink_route_multipath()
* zebra/zebra_rib.c: If route has a gateway, delete only existing
route with that specified gateway.
|
|
* Fix lib/smux.c's reliance on daemons exporting struct
thread_master *master.
|
|
* ospfd/ospf_packet.c: Fix typos, extra squiggly bracket. Note to
self: in future make sure that when you test compile a change you
actually have the relevant configure options enabled.
|
|
* ospfd/ospf_packet.c: Update Hasso's hack slightly, add comment
elaborating on Hasso's, use the SET/CHECK_FLAG macros.
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
* zebra/ioctl.c: Properly zero-out struct ifreq before passing it
to the SIOCSIFFLAGS ioctl(2), so that it doesn't
occasionally trigger promisc mode on interface.
Reported/tested by: Vladimir B. Grebenschikov <vova@sw.ru>
(patch snarfed taken from FreeBSD ports)
|
|
* bgpd/ChangeLog: Update (wasnt commited with the fix)
|
|
* lib/privs.h (zprivs_init): do not use zlog() as it depends on
vty having been initialised (zlog calls vty_log). print to stderr
directly instead.
|
|
* bgp_clist.c (community_list_delete): honour deny statements
|
|
Compile and warning fixes for the ripd 'passive-interface default' patch.
|
|
* (bgp_clist.c): Run it through indent -nut (all indentation to
be spaced, get rid of mix of tabs and spaces)
|
|
Subject: [zebra 12403] patch for ripd to accept any version of RIP
by default
The default Cisco IOS behavior is to send RIP version 1 packets and receive
version 1 and version 2 packets. But zebra version 0.92a sends and receives
only version 2 packets by default.
I have patched the code to change zebra's default behavior to sending
version 2 packets (same as before) but receiving both versions. While
this is still not identical to Cisco's behavior, it does now accept
packets of both versions and retains backwards compatibility with
zebra configurations.
|
|
Subject: [zebra 12406] patch for ripd to support "passive-interface
default" behavior
In Cisco IOS, the router rip passive-interface subcommand can accept
an interface name of "default". In that cases, all interfaces are set
to be passive by default, and you must explicitly make it non-passive
by using the "no passive-interface <ifname>" command if you want updates
to go to that interface.
<command implemented for zebra>
|
|
* (zebra/rtadvc.): can not set checksum for ICMPV6, see:
From: Jun-ichiro itojun Hagino <itojun@iijlab.net>
Subject: [zebra 11052] setsockopt(IPV6_CHECKSUM) does not work for ICMPv6
socket
setsockopt(IPV6_CHECKSUM) does not work for ICMPv6 socket.
RFC2292 may not be clear enough about it (it talks about raw socket
and ICMPv6 socket mixed up), but the next revision
(draft-ietf-ipngwg-rfc2292bis-02.txt) is very clear about it.
> An attempt to set IPV6_CHECKSUM for an ICMPv6 socket will fail.
|
|
* (ospf_spf.c): Fix indentation - primarily the mix of tabs and spaces.
Ran through indent -nut (GNU style, but only spaces for indentation)
|
|
* Revert Cougar's sort interface names patch, causes problems with
enabling of interfaces for OSPF in ospfd.
|
|
* (ospf_spf.c): Fix consideration of costs for PtP nexthops in
ospf_nexthop_calculation().
|
|
* Fix up defaults for --enable-{user,group}
|
|
* Fix up case of --enable-vty-group not being specified
|
|
|
