| Age | Commit message (Collapse) | Author |
|---|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
|
|
|
Subject: [zebra 19125] vtysh bogus perms check
vtysh checks that the zebra.vty socket uid is == to its own euid, this is
bogus - let the kernel decide whether permissions match, vtysh shouldnt
try second guess. (this becomes noticeable when neither zebra nor vtysh
are run as root :) )
|
|
Subject: [zebra 19120] [PATCH] Vtysh
I really don't know how I could miss that one. Opsf(6)d have
prefix-lists as well.
|
|
|
|
asm/types.h is required for netlink.
Later glibc's seem to have resolved the warning.
|
|
|
|
Linux capabilities enabled (if libcap is enabled).
|
|
supplied VERSION and CONFDATE.
|
|
Add a DATE AC_SUBST.
|
|
Subject: [zebra 19097] HAVE_ASM_TYPES
does anyone know why lib/zebra.h has:
#ifdef HAVE_ASM_TYPES_H
#include <asm/types.h>
#endif /* HAVE_ASM_TYPES_H */
There's no need for it that i can see (least not on linux) and it
causes compile warnings. Is it needed? If so, why?
|
|
Subject: [zebra 19093] [PATCH] Two more fixes
1) From 6Wind patch - show router and interface nodes from ospf6d when
using vtysh and don't show defaults in interface node. Fixes bugzilla
#14.
|
|
Subject: [zebra 19093] [PATCH] Two more fixes
Show NSSA LSA route info in "show ip ospf database" output
|
|
|
|
|
|
|
|
Subject: [zebra 19091] [PATCH] NSSA fixes try2
NSSA didn't work without problems even after my previous fixes. Seems
that I tracked down problems finally.
|
|
Subject: [zebra 19084] Re: suspected memory leakage upon static route
I believe this is a more complete patch, it also addresses
allocating/freeing of nexthop->ifname string buffer (1) using
XSTRDUP/XFREE macros (thus correctly updating memory statistics), and
(2) for all nexthop->type cases that carry an ifname string.
|
|
Subject: [zebra 19080] suspected memory leakage upon static route deletion
upon deletion of a static route entry, at the end of
zebra/zebra_rib.c/static_delete_ipv4(), there's a call to XFREE to
deallocate the 'struct static_ipv4'. However, in the case of a static with
ifname as nexthop (type==STATIC_IPV4_IFNAME), this struct holds a pointer to
a dynamically allocated ifname string buffer (si->gate.ifname, see its
allocation within static_add_ipv4() using XSTRDUP). IMO, the attached patch
is required.
Notes: the same applies to IPv6 statics as well (fix included in patch);
and, I admit I haven't yet tested that, but it seems simple enough to be
working... ;->
|
|
|
|
Fix removal of Type-7 LSAs, http://bugzilla.dishone.st/show_bug.cgi?id=18
|
|
Should recognise the absence of an interval now and schedule one-shot dump.
hopefully.
|
|
Subject: [zebra 19019] [PATCH] daemons -A option
Works now. Patch attached. Not tested for IPv6, but should work there too.
|
|
Subject: [PATCH] sockdir
"configure.ac" script ignores absent socket directory. So do all demons
(with just a puzzling complaint to _stderr_ only!). I added /tmp and
/var/tmp to the list of possible dirs. They should be present in most
configurations.
|
|
problems with NSSA are resolved, and we can determine whether this had any
point.
|
|
It didnt solve a particular problem of Hasso's, but i'm committing it just
for posterities sakes, so i dont lose it (i'll revert it immediately).
|
|
Subject: [zebra 18947] [PATCH] openpam patch
configure support for openpam (freebsd5.0)
|
|
Subject: [zebra 18941] Re: [PATCH] misc patch
Program shouldn't terminate on pager execution failure. We can also use
"PAGER" environment variable - it's very common.
|
|
|
|
This one fixes "router xxx" node commands in vtysh. Don't get "unknown
command" error when entering "passive-interface eth0" command while
ospfd and ospf6d running etc.
|
|
|
|
http://hasso.linux.ee/zebra/ht-distribute-18042003.patch
Allows to extract.pl to pickup "distribute-list ..." commands for vtysh
(ripngd and ripd).
|
|
http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch
Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh
(ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the
ripngd/ directory.
|
|
http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch
Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes
a lot of errors with "match ..." and "set ..." commands when using vtysh.
|
|
Subject: [zebra 17365] [PATCH] Ospf area id's DECIMAL -> ADDRESS
It was annoying for me to view area id's like 335544330 (20.0.0.10 in
address format) in configuration. Most of other network devices are
using address-like id's and so does zebra when using "show ip ospf *"
commands.
You can still enter id's in decimal format, but they are just shown in
address format.
|
|
Subject: [zebra 18677] zebra initialisation bug and patch
Hi All,
I have found a bug in zebra that prevents its routing table and
interface database from being initialised properly. The problem occurs
when a request is made via the netlink socket but the kernel produces a
EWOULDBLOCK/EAGAIN when the result is trying to be retrieved via a
recvmsg(). Zebra does not do anything about this and continues to
function (with an empty routing table and interface list) as if nothing
has happened. With no such information the routing protocol dosn't work!
Two functions are called during the initialisation of Zebra:
interface_lookup_netlink() and netlink_route_read() - obtaining the
interfaces and routing table from the kernel respectively. These are the
only time these functions are called.
These functions, interface_lookup_netlink() and netlink_route_read(),
use netlink_parse_info() to recieve the data from the netlink socket.
The problem is, netlink_parse_info() returns (without error) when its
call to recvmsg() results in an errno EWOULDBLOCK/EAGAIN. This behaviour
is expected by other funtions calling netlink_parse_info() -
netlink_parse_info is simply recalled at a later stage. However, on
initialisation it is never recalled.
Since zebra is expected to nothing else during initialisation it was
easiest to temporarily change the netlink socket to BLOCK and wait
indefinently until the kernel responds with the required information.
Attached is a patch with these changes.
Comments and questions are welcome.
Please inform me if this patch is added to the Zebra source.
--israel
|
|
Subject: [zebra 18689] [PATCH] misc patch
Add missing param to zlog
|
|
Subject: [zebra 18689] [PATCH] misc patch
remove unused vars
|
|
(following from initial patches by Amir & Sergey Vyshnevetskiy ([zebra
18689])
|
|
Subject: [zebra 18767] possible SIGSEGV
Fix incorrect memset
|
|
To: zebra@zebra.org
Subject: [zebra 18648] [PATCH] Selforiginated Type-7 LSA's are not flushed
from lsdb
|
|
Date: 2003-04-10 14:32:31 +0200 (Thu, 10 Apr 2003)
New Revision: 212
Modified:
zebra-ag/trunk/ospfd/ospf_lsa.c
Log:
I've fixed a small opaque lsa bug which got triggered when deleting opaque
lsa of type 11. It used area->ospf->.. when area was null. This was replaced
by a ospf = ospf_lookyp(); ospf->...
|
|
Date: 2003-04-08 10:37:12 +0200 (Tue, 08 Apr 2003)
Log:
new ospfclient application with usage and more comments.
|
|
Log:
Removed unused variable in interface.c
|
|
Log:
I've fixed a small bug in connected_down_ipv4():
I changed
if (ifc_pointopoint (ifc))
into
if (ifc_pointopoint (ifc) && dest)
like show in connected_up_ipv4()
After changing this 'ip address x/y'; 'no ip address x/y' works without
crash
when done in sequence.
|
|
Add ospfclient to ospfclient/.cvsignore
|
|
|
|
Add dependency on rebuild target for vtysh_cmd.c to Makefile.am
|
|
|
