| Age | Commit message (Collapse) | Author |
|---|
|
(at Technical University of Madrid as part of Euro6ix Project)
Enhanced Route Server functionality and Route-Maps:
* bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to
support rs-clients. A 'struct bgp_table *rib' has been added to the
first (to mantain a separated RIB for each rs-client) and two new
route-maps have been added to the last (for import/export policies).
Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX},
PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT.
* bgpd/bgpd.c: Modified the functions that create/delete/etc peers in
order to consider the new fields included in 'struct peer' for
supporting rs-clients, i.e. the import/export route-maps and the
'struct bgp_table'.
* bgpd/bgp_route.{ch}: Modified several functions related with
receiving/sending announces in order to support the new Route Server
capabilities.
Function 'bgp_process' has been reorganized, creating an auxiliar
function for best path selection ('bgp_best_selection').
Modified 'bgp_show' and 'bgp_show_route' for displaying information
about any RIB (and not only the main bgp RIB).
Added commands for displaying information about RS-clients RIBs:
'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient
(A.B.C.D|X:X::X:X) X:X::X:X/M', etc
* bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two
new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT})
and 'void *owner' which points to 'struct bgp' or 'struct peer' which
owns the table.
When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set.
* bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and
'no neighbor ... route-server-client' now not only set/unset the flag
PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct
bgp_table' of the peer. Special actions are taken for peer_groups.
Command 'neighbor ... route-map WORD (in|out)' now also supports two
new kinds of route-map: 'import' and 'export'.
Added commands 'clear bgp * rsclient', etc. These commands allow a new
kind of soft_reconfig which affects only the RIB of the specified
RS-client.
Added commands 'show bgp rsclient summary', etc which display a
summary of the rs-clients configured for the corresponding address
family.
* bgpd/bgp_routemap.c: A new match statement is available,
'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in
import/export route-maps, and it matches when the peer who announces
(when used in an import route-map) or is going to receive (when used
in an export route-map) the route is the same than the one specified
in the statement.
For peer-groups the statement matches if the specified peer is member
of the peer-group.
A special version of the command, 'match peer local', matches with
routes originated by the Route Server (defined with 'network ...',
redistributed routes and default-originate).
* lib/routemap.{ch}: Added a new clause 'call NAME' for use in
route-maps. It jumps into the specified route-map and when it returns
the first route-map ends if the called RM returns DENY_MATCH, or
continues in other case.
|
|
* Makefile.am (EXTRA_DIST): New - just has EXTRA_DIST. (Using a
directory in EXTRA_DIST in the parent was causing 'make dist' to fail.)
(Now m4/Makefile* is first-class and included from top level.)
|
|
* Rename scripts to *.sh.in, and use autoconf-style substitution
for prefix and localstatedir.
|
|
|
|
* update-autotools: print tools versions to aid people in sending
bug reports.
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
* configure.ac: modify default CFLAGS to be compiler agnostic
build Makefile for tests/ subdir.
|
|
* Makefile.am (EXTRA_DIST): Add missing \, so tools stuff is
really in distfile.
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
|
Remove disthook that removed the crud that was copied in due to this.
|
|
if --enable-vtysh, look for perl, and substitute into vtysh/extract.pl,
rather than assuming perl is in /usr/bin
Look for tputs in libtermcap and libcurses, in addition to
previously-searched locations. Follow GNU readlines search order.
Clean up --enable-vtysh definition in configure.ac.
Add vtysh/vtysh_cmds.c to CLEANFILES. This is important if
extract.pl fails, so that 'make clean && make' will regenerate
vtysh_cmds.c rhather than using the old zero-length file.
|
|
|
|
to read system one.
|
|
* configure.ac: Add solaris support for the zebra/*_solaris
method's, based on Sowmini's patches.
* zebra/Makefile.am: support for IOCTL_METHOD, as per Sowmini's
patch.
|
|
* ospf_spf.h: Add backlink field to struct vertex
* ospf_spf.h: (ospf_vertex_new) initialise backlink
(ospf_lsa_has_link) return index of link back to
vertex V from candidate vertex W, or -1 if no link exists.
(ospf_spf_next) save backlink index for candidate vertex
* ospf_interface.c: (ospf_vl_set_params) Use the backlink index
to determine correct address for virtual-link peers. Fall back
to older "pick first link" method if no backlink index exists.
|
|
* Fixed "(no) ipv6 forwarding" command logic.
* Added --disable-capabilities switch to configure.
|
|
|
|
|
|
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
from vtysh ([quagga-dev 932]).
|
|
* tests/test-sig.c: New file, regression test for sigevents.
* lib/Makefile.am: add sigevent.{c,h}
* (isis|rip|ripng|ospf|ospf6|bgp)d/\1_main.c: modify for sigevents.
* zebra/main.c: ditto.
|
|
* Makefile.am: redhat/ is a dist subdir too.
|
|
[...]
source='isis_main.c' object='isis_main.o' libtool=no depfile='.deps/isis_main.Po' tmpdepfile='.deps/isis_main.TPo' depmode=gcc /usr/local/bin/bash ../depcomp gcc -DHAVE_CONFIG_H -DSYSCONFDIR=\"/home/jardin/bin/etc/\" -I. -I. -I.. -I.. -I.. -I../lib -g -O2 -Wall -c `test -f isis_main.c || echo './'`isis_main.c
gcc -g -O2 -Wall -o isisd isis_main.o isis_adjacency.o isis_lsp.o dict.o isis_circuit.o isis_pdu.o isis_tlv.o isisd.o isis_misc.o isis_network.o isis_zebra.o isis_dr.o isis_flags.o isis_dynhn.o iso_checksum.o isis_csm.o isis_events.o isis_spf.o isis_route.o isis_routemap.o ../lib/libzebra.a -lm -lcrypt
Making all in redhat
make: don't know how to make all. Stop
*** Error code 1
Stop in /usr/home/jardin/no_save/quagga.
*** Error code 1
Stop in /usr/home/jardin/no_save/quagga.
quagga$
|
|
* Makefile.am: as per gdt, specify the redhat dir as a DIST_SUBDIR,
remove the redhat/... dist targets - instead these now go in..
redhat/Makefile.am: (new) proper place to describe redhat/ dist
files, as well as allow quagga.spec to be regenerated properly.
redhat/quagga.sysconfig: specify conf file location.
redhat/quagga.spec.in: Add 2 patches to RPM build.
|
|
* redhat/isisd.init: new file, init script for isisd.
redhat/quagga.sysconfig: new file, sysconfig file for quagga
initscripts.
redhat/quagga.spec.in: various cleanups, including sysconfig patch
from RH, fixed UID/GID as per RH EL, shell changed to
/sbin/nologin, daemon vty's listen to 127.1 only per default and
isisd packaged.
redhat/*.init: sysconfig support and runlevels specified.
|
|
* Makefile.am: put the redhat/ stuff into EXTRA_DIST rather than
copying via dist-hook. Remove ~ files backup cruft from dists.
isisd/Makefile.am: sysconf example should go via
dist_examples_DATA. The include-netbsd/ headers werent mentioned
as sources and werent being copied into dists.
|
|
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
always.
|
|
555]. Okayed by Paul.
|
|
Use pkginclude_HEADERS rather than include_HEADERS to place includes
in ${prefix}/include/quaggainstead of polluting ${prefix}/include.
|
|
sysconfdir were specified, due to incorrect extra quoting of
sysconfdir. Thanks to Vincent Jardin for the bug report.
|
|
Resolves bug #66.
|
|
and if so which flavor.
Fixes 99% of bugzilla bug #62.
|
|
files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname.
|
|
* ChangeLog: Update with logs from last 2 releases.
|
|
* Revert Cougar's sort interface names patch, causes problems with
enabling of interfaces for OSPF in ospfd.
|
|
|
|
To: zebra@zebra.org
Subject: [zebra 18648] [PATCH] Selforiginated Type-7 LSA's are not flushed
from lsdb
|
|
Date: 2003-04-10 14:32:31 +0200 (Thu, 10 Apr 2003)
New Revision: 212
Modified:
zebra-ag/trunk/ospfd/ospf_lsa.c
Log:
I've fixed a small opaque lsa bug which got triggered when deleting opaque
lsa of type 11. It used area->ospf->.. when area was null. This was replaced
by a ospf = ospf_lookyp(); ospf->...
|
|
* Sync to Zebra CVS
* Fix lib/thread.h leak
* Fix small Opaque LSA leak
* Do not configure OSPF interfaces for secondary addresses
* vtysh fixes from Hasso
* Dave Watson's missing ntohs fix
|
|
* sync to latest zebra CVS
* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
