| Age | Commit message (Collapse) | Author |
|---|
|
* HACKING: Expand on the importance of supplying good ChangeLog's in
the PATCH SUBMISSION section.
|
|
* HACKING: remove the 'manually patch redhat/quagga.spec' bit
from RELEASE section. Let the rpm revision be CONFDATE, will work
fine.
|
|
brackets around source. Single ones broke square brackets in the
code (arrays).
|
|
and define action for cross-compiling.
[backport candidate]
|
|
generator code.
* isisd/Makefile.am: Variables to handle conditonal compiling of
topology generator code.
* isisd/isis_lsp.c: lsppdu_realloc() is used by topology generator.
* isisd/isisd.c: Rename show_isis_topology_cmd to not conflict the one
in the isis_spf.c.
* isisd/isisd.h: Remove TOPOLOGY_GENERATE define, it will be defined in
toplevel config.h if topology generator is enabled.
* isisd/topology/Makefile.am: Handle the libtoolized Quagga libraries.
|
|
* INSTALL.quagga.txt: Add note about additional CVS build
requirements, if one wishes to build ps/pdf docs.
|
|
* configure.ac: Add strnlen to AC_CHECK_FUNCS.
* zebra.h: Should include str.h to pick up missing functions.
* str.h: Declare strnlen if needed.
* str.c: Do not include str.h since zebra.h now includes it.
(strnlen) New function.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
about various headers. CFLAGS is not correct place to specify
includes, INCLUDES is for that.
|
|
tries really hard to make icc look like gcc, there are some
differences. It's very verbose with -Wall and it doesn't support
the individual -W options. We are going to ignore some of these
warnings.
|
|
include year 2005.
|
|
* Extensions to Neighbor Discovery for Mobile IPv6
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* configure.ac: Solaris 8 can use the newer lifreq based methods
too, allows IPv6.
|
|
didn't match the pattern.
Fixes bugzilla #150. [backport candidate]
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* configure.ac: Bump version to 0.99.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* redhat/quagga.spec.in: Fix postun script to avoid misleading error
message saying the postun scriptlet failed when watchquagga
is not running.
(pullup candidate)
|
|
* configure.ac: Test for header file <ucontext.h> (for use in
signal processing).
* sigevent.c: (trap_default_signals) Use the SA_SIGINFO flag to
pass additional siginfo_t and ucontext_t arguments to core_handler
and exit_handler.
(core_handler,exit_handler) Now invoked with 3 arguments (using
SA_SIGINFO). Pass additional info to zlog_signal.
(program_counter) New function to find program counter in ucontext_t,
needs to be enhanced to support more platforms (currently works only
on Linux/x86).
* log.h: Change the zlog_signal prototype to add new arguments
siginfo_t * and program_counter.
* log.c: (zlog_signal) Add new arguments siginfo and program_counter.
Include si_addr and program counter (if non-NULL) in message.
And remove #ifdef HAVE_GLIBC_BACKTRACE around hex_append, since
that is now used to render the si_addr and PC pointers.
|
|
* configure.ac: If configure is invoked with --enable-snmp, but
the configure script is unable to find SNMP support on the platform,
then configure should give an error message and exit.
|
|
* redhat/quagga.spec.in: Pass --enable-gcc-rdynamic to configure
to get gcc to link with -rdynamic for better backtraces.
When the rpm is upgraded, the restart logic now works as follows:
1. stop watchquagga; 2. stop all routing daemons; 3. restart zebra
if it was running; 4. start all routing daemons that were running;
and 5. start watchquagga if it was running.
|
|
* configure.ac: Bump version to 0.98.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* configure.ac: Bump version to 0.97.5
* doc/quagga.info: autogenerated, version bump.
|
|
etc. so configure output shows the choice we made.
(Andrew: please recheck on a buggy system; it configures/compiles fine
on NetBSD.)
|
|
* configure.ac: Added test for broken CMSG_FIRSTHDR macro
(relevant for Solaris 8 and unpatched Solaris 9, don't know
whether other platforms are affected).
* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
by the configure test program).
* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
of CMSG_FIRSTHDR.
* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
instead of CMSG_FIRSTHDR.
* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of
CMSG_FIRSTHDR.
|
|
* NEWS: Note improved logging facilities.
|
|
* configure.ac: Add new option --enable-gcc-rdynamic to link
with -rdynamic.
|
|
configure.ac: Bump version to 0.97.4
doc/quagga.info: ditto (autogenerated file)
|
|
* redhat/quagga.spec.in: daemonv6_list should contain only IPv6 daemons.
|
|
* redhat/quagga.spec.in: Add watchquagga, and fix some other
logic to make sure that all daemons are restarted on upgrades
and stopped on package removal.
|
|
* redhat/quagga.sysconfig: Define some variables to support watchquagga.
|
|
* configure.ac: Add a define for DAEMON_VTY_DIR in config.h.
|
|
* {configure.ac,Makefile.am}: Build watchquagga by default.
|
|
* NEWS: Note addition of watchquagga.
* HACKING: Note that watchquagga is in testing phase.
|
|
* watchquagga: New watchquagga daemon.
|
|
* redhat/Makefile.am: Added watchquagga.init to EXTRA_DIST.
|
|
* redhat/watchquagga.init: New file, init script for watchquagga.
|
|
* HACKING: Indicate that header files should be consulted for
documentation, particularly logging levels in lib/log.h.
* log.h: Document appropriate use of syslog logging priorities
inside quagga.
|
|
* TODO: Add source routing, zebra filtering and lib/ documenting.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
makeinfo:
* Don't attempt to generate it after every ./configure.
* Don't remove it while cleaning up.
|
|
* INSTALL.quagga.txt: texinfo version corrected, so section on
that 4.7-x being unknown is not needed.
|
|
* INSTALL.quagga.txt: Some quagga specific INSTALL notes.
* README: s/GNU Zebra/Quagga/ and refer to IS-IS support.
|
|
* INSTALL: update-autotools, autoreconf -i will install this, remove
the file so it always matches the autoconf which created
configure (ie the quagga snapshot producing host).
|
|
* configure.ac: Fix AC_CONFIG_FILES, the chmod seems to run for
every input file, should be only be for vtysh/extract.pl, so that
should be a seperate AC_CONFIG_FILES.
|
|
* redhat/quagga.spec.in: add comments showing how to get gcc verbosity
|
|
* configure.ac: bump version to 0.97.3, release imminent.
|
|
* configure.ac: Arguments to AC_OUTPUT is deprecated, use
AC_CONFIG_FILES instead. Rearrange the order slightly to put the
Makefiles first (silly aesthetic thing, dont know why I had to do
this ;) ). Add doc/defines.texi to the list.
* NEWS: bgp route-server support added, refer to docs.
* update-autotools: call automake with --add-missing and --copy,
former is important for obvious reasons, latter for dist files,
and --gnu to enable whatever extra goodness checks.
* {depcomp, install-sh, missing}: removed, auto-generated files.
|
|
* HACKING: Expand on ChangeLogs, eg current practice for certain
directories and certain other meta-data is not to maintain a
ChangeLog. Expand on the commit message, IMHO, commit message
should always be ChangeLog for files where ChangeLog is kept.
Solaris is supported on any platform (with, at moment, an
additional patch).
|
|
* configure.ac: bump version to 0.97.2, release imminent.
|
