| Age | Commit message (Collapse) | Author | 
|---|
|  | * Makefile.am (EXTRA_DIST): Add missing \, so tools stuff is
        really in distfile. | 
|  | libzebra and libospfapiclient are now built shared, and linked shared
with the daemons.  This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller.  Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries.  As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit. | 
|  | Remove disthook that removed the crud that was copied in due to this. | 
|  | if --enable-vtysh, look for perl, and substitute into vtysh/extract.pl,
  rather than assuming perl is in /usr/bin
  Look for tputs in libtermcap and libcurses, in addition to
  previously-searched locations.  Follow GNU readlines search order.
  Clean up --enable-vtysh definition in configure.ac.
  Add vtysh/vtysh_cmds.c to CLEANFILES.  This is important if
  extract.pl fails, so that 'make clean && make' will regenerate
  vtysh_cmds.c rhather than using the old zero-length file. | 
|  |  | 
|  | to read system one. | 
|  | * configure.ac: Add solaris support for the zebra/*_solaris
          method's, based on Sowmini's patches.
        * zebra/Makefile.am: support for IOCTL_METHOD, as per Sowmini's
          patch. | 
|  | * ospf_spf.h: Add backlink field to struct vertex
        * ospf_spf.h: (ospf_vertex_new) initialise backlink
          (ospf_lsa_has_link) return index of link back to
          vertex V from candidate vertex W, or -1 if no link exists.
          (ospf_spf_next) save backlink index for candidate vertex
        * ospf_interface.c: (ospf_vl_set_params) Use the backlink index
          to determine correct address for virtual-link peers. Fall back
          to older "pick first link" method if no backlink index exists. | 
|  | * Fixed "(no) ipv6 forwarding" command logic.
* Added --disable-capabilities switch to configure. | 
|  |  | 
|  |  | 
|  |  | 
|  | * (many) reference <lib/version.h> rather than "version.h",
	because version.h is a generated file and not present in the
	source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir | 
|  | from vtysh ([quagga-dev 932]). | 
|  | * tests/test-sig.c: New file, regression test for sigevents.
        * lib/Makefile.am: add sigevent.{c,h}
        * (isis|rip|ripng|ospf|ospf6|bgp)d/\1_main.c: modify for sigevents.
        * zebra/main.c: ditto. | 
|  | * Makefile.am: redhat/ is a dist subdir too. | 
|  | [...]
source='isis_main.c' object='isis_main.o' libtool=no  depfile='.deps/isis_main.Po' tmpdepfile='.deps/isis_main.TPo'  depmode=gcc /usr/local/bin/bash ../depcomp  gcc -DHAVE_CONFIG_H -DSYSCONFDIR=\"/home/jardin/bin/etc/\" -I. -I. -I.. -I.. -I.. -I../lib     -g -O2 -Wall -c `test -f isis_main.c || echo './'`isis_main.c
gcc  -g -O2 -Wall   -o isisd  isis_main.o isis_adjacency.o  isis_lsp.o dict.o isis_circuit.o  isis_pdu.o isis_tlv.o isisd.o  isis_misc.o isis_network.o isis_zebra.o  isis_dr.o isis_flags.o isis_dynhn.o  iso_checksum.o isis_csm.o isis_events.o  isis_spf.o isis_route.o isis_routemap.o ../lib/libzebra.a -lm -lcrypt
Making all in redhat
make: don't know how to make all. Stop
*** Error code 1
Stop in /usr/home/jardin/no_save/quagga.
*** Error code 1
Stop in /usr/home/jardin/no_save/quagga.
quagga$ | 
|  | * Makefile.am: as per gdt, specify the redhat dir as a DIST_SUBDIR,
          remove the redhat/... dist targets - instead these now go in..
          redhat/Makefile.am: (new) proper place to describe redhat/ dist
          files, as well as allow quagga.spec to be regenerated properly.
          redhat/quagga.sysconfig: specify conf file location.
          redhat/quagga.spec.in: Add 2 patches to RPM build. | 
|  | * redhat/isisd.init: new file, init script for isisd.
          redhat/quagga.sysconfig: new file, sysconfig file for quagga
          initscripts.
          redhat/quagga.spec.in: various cleanups, including sysconfig patch
          from RH, fixed UID/GID as per RH EL, shell changed to
          /sbin/nologin, daemon vty's listen to 127.1 only per default and
          isisd packaged.
          redhat/*.init: sysconfig support and runlevels specified. | 
|  | * Makefile.am: put the redhat/ stuff into EXTRA_DIST rather than
          copying via dist-hook. Remove ~ files backup cruft from dists.
          isisd/Makefile.am: sysconf example should go via
          dist_examples_DATA. The include-netbsd/ headers werent mentioned
          as sources and werent being copied into dists. | 
|  | - add privs support
  - use misc quagga's definitions
  - make it compile"able"
  - fix segfault cases related to hostname()
  - add debug isis xxx command
This patch has been approved by Paul Jakma. | 
|  | * configure.ac (and everywhere a regular file is opened for
          writing): use file permissions from configure rather than
          compiled-in umask. | 
|  | always. | 
|  | 555]. Okayed by Paul. | 
|  | Use pkginclude_HEADERS rather than include_HEADERS to place includes
in ${prefix}/include/quaggainstead of polluting ${prefix}/include. | 
|  | sysconfdir were specified, due to incorrect extra quoting of
sysconfdir.  Thanks to Vincent Jardin for the bug report. | 
|  | Resolves bug #66. | 
|  | and if so which flavor.
Fixes 99% of bugzilla bug #62. | 
|  | files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname. | 
|  | * ChangeLog: Update with logs from last 2 releases. | 
|  | * Revert Cougar's sort interface names patch, causes problems with
	enabling of interfaces for OSPF in ospfd. | 
|  |  | 
|  | To: zebra@zebra.org
Subject: [zebra 18648] [PATCH] Selforiginated Type-7 LSA's are not flushed
         from lsdb | 
|  | Date: 2003-04-10 14:32:31 +0200 (Thu, 10 Apr 2003)
New Revision: 212
Modified:
   zebra-ag/trunk/ospfd/ospf_lsa.c
Log:
I've fixed a small opaque lsa bug which got triggered when deleting opaque
lsa of type 11. It used area->ospf->.. when area was null. This was replaced
by a ospf = ospf_lookyp(); ospf->... | 
|  | * Sync to Zebra CVS
        * Fix lib/thread.h leak
        * Fix small Opaque LSA leak
        * Do not configure OSPF interfaces for secondary addresses
        * vtysh fixes from Hasso
        * Dave Watson's missing ntohs fix | 
|  | * sync to latest zebra CVS
	* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | [zebra 16525] PATCH: Bugfixes for KAME systems | 
|  |  | 
|  | per-daemon and/or integrated config file | 
|  |  |