| Age | Commit message (Collapse) | Author |
|---|
|
* configure.ac: Fix host string recognition for Solaris Nevada aka
solaris2.10.1, and hopefully future such strings.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* HACKING: Expand on the importance of supplying good ChangeLog's in
the PATCH SUBMISSION section.
|
|
* HACKING: remove the 'manually patch redhat/quagga.spec' bit
from RELEASE section. Let the rpm revision be CONFDATE, will work
fine.
|
|
brackets around source. Single ones broke square brackets in the
code (arrays).
|
|
and define action for cross-compiling.
[backport candidate]
|
|
generator code.
* isisd/Makefile.am: Variables to handle conditonal compiling of
topology generator code.
* isisd/isis_lsp.c: lsppdu_realloc() is used by topology generator.
* isisd/isisd.c: Rename show_isis_topology_cmd to not conflict the one
in the isis_spf.c.
* isisd/isisd.h: Remove TOPOLOGY_GENERATE define, it will be defined in
toplevel config.h if topology generator is enabled.
* isisd/topology/Makefile.am: Handle the libtoolized Quagga libraries.
|
|
* INSTALL.quagga.txt: Add note about additional CVS build
requirements, if one wishes to build ps/pdf docs.
|
|
* configure.ac: Add strnlen to AC_CHECK_FUNCS.
* zebra.h: Should include str.h to pick up missing functions.
* str.h: Declare strnlen if needed.
* str.c: Do not include str.h since zebra.h now includes it.
(strnlen) New function.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
about various headers. CFLAGS is not correct place to specify
includes, INCLUDES is for that.
|
|
tries really hard to make icc look like gcc, there are some
differences. It's very verbose with -Wall and it doesn't support
the individual -W options. We are going to ignore some of these
warnings.
|
|
include year 2005.
|
|
* Extensions to Neighbor Discovery for Mobile IPv6
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* configure.ac: Solaris 8 can use the newer lifreq based methods
too, allows IPv6.
|
|
didn't match the pattern.
Fixes bugzilla #150. [backport candidate]
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* configure.ac: Bump version to 0.99.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* redhat/quagga.spec.in: Fix postun script to avoid misleading error
message saying the postun scriptlet failed when watchquagga
is not running.
(pullup candidate)
|
|
* configure.ac: Test for header file <ucontext.h> (for use in
signal processing).
* sigevent.c: (trap_default_signals) Use the SA_SIGINFO flag to
pass additional siginfo_t and ucontext_t arguments to core_handler
and exit_handler.
(core_handler,exit_handler) Now invoked with 3 arguments (using
SA_SIGINFO). Pass additional info to zlog_signal.
(program_counter) New function to find program counter in ucontext_t,
needs to be enhanced to support more platforms (currently works only
on Linux/x86).
* log.h: Change the zlog_signal prototype to add new arguments
siginfo_t * and program_counter.
* log.c: (zlog_signal) Add new arguments siginfo and program_counter.
Include si_addr and program counter (if non-NULL) in message.
And remove #ifdef HAVE_GLIBC_BACKTRACE around hex_append, since
that is now used to render the si_addr and PC pointers.
|
|
* configure.ac: If configure is invoked with --enable-snmp, but
the configure script is unable to find SNMP support on the platform,
then configure should give an error message and exit.
|
|
* redhat/quagga.spec.in: Pass --enable-gcc-rdynamic to configure
to get gcc to link with -rdynamic for better backtraces.
When the rpm is upgraded, the restart logic now works as follows:
1. stop watchquagga; 2. stop all routing daemons; 3. restart zebra
if it was running; 4. start all routing daemons that were running;
and 5. start watchquagga if it was running.
|
|
* configure.ac: Bump version to 0.98.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* configure.ac: Bump version to 0.97.5
* doc/quagga.info: autogenerated, version bump.
|
|
etc. so configure output shows the choice we made.
(Andrew: please recheck on a buggy system; it configures/compiles fine
on NetBSD.)
|
|
* configure.ac: Added test for broken CMSG_FIRSTHDR macro
(relevant for Solaris 8 and unpatched Solaris 9, don't know
whether other platforms are affected).
* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
by the configure test program).
* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
of CMSG_FIRSTHDR.
* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
instead of CMSG_FIRSTHDR.
* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of
CMSG_FIRSTHDR.
|
|
* NEWS: Note improved logging facilities.
|
|
* configure.ac: Add new option --enable-gcc-rdynamic to link
with -rdynamic.
|
|
configure.ac: Bump version to 0.97.4
doc/quagga.info: ditto (autogenerated file)
|
|
* redhat/quagga.spec.in: daemonv6_list should contain only IPv6 daemons.
|
|
* redhat/quagga.spec.in: Add watchquagga, and fix some other
logic to make sure that all daemons are restarted on upgrades
and stopped on package removal.
|
|
* redhat/quagga.sysconfig: Define some variables to support watchquagga.
|
|
* configure.ac: Add a define for DAEMON_VTY_DIR in config.h.
|
|
* {configure.ac,Makefile.am}: Build watchquagga by default.
|
|
* NEWS: Note addition of watchquagga.
* HACKING: Note that watchquagga is in testing phase.
|
|
* watchquagga: New watchquagga daemon.
|
|
* redhat/Makefile.am: Added watchquagga.init to EXTRA_DIST.
|
|
* redhat/watchquagga.init: New file, init script for watchquagga.
|
|
* HACKING: Indicate that header files should be consulted for
documentation, particularly logging levels in lib/log.h.
* log.h: Document appropriate use of syslog logging priorities
inside quagga.
|
|
* TODO: Add source routing, zebra filtering and lib/ documenting.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
makeinfo:
* Don't attempt to generate it after every ./configure.
* Don't remove it while cleaning up.
|
|
* INSTALL.quagga.txt: texinfo version corrected, so section on
that 4.7-x being unknown is not needed.
|
|
* INSTALL.quagga.txt: Some quagga specific INSTALL notes.
* README: s/GNU Zebra/Quagga/ and refer to IS-IS support.
|
|
* INSTALL: update-autotools, autoreconf -i will install this, remove
the file so it always matches the autoconf which created
configure (ie the quagga snapshot producing host).
|
|
* configure.ac: Fix AC_CONFIG_FILES, the chmod seems to run for
every input file, should be only be for vtysh/extract.pl, so that
should be a seperate AC_CONFIG_FILES.
|
|
* redhat/quagga.spec.in: add comments showing how to get gcc verbosity
|
|
* configure.ac: bump version to 0.97.3, release imminent.
|
|
* configure.ac: Arguments to AC_OUTPUT is deprecated, use
AC_CONFIG_FILES instead. Rearrange the order slightly to put the
Makefiles first (silly aesthetic thing, dont know why I had to do
this ;) ). Add doc/defines.texi to the list.
* NEWS: bgp route-server support added, refer to docs.
* update-autotools: call automake with --add-missing and --copy,
former is important for obvious reasons, latter for dist files,
and --gnu to enable whatever extra goodness checks.
* {depcomp, install-sh, missing}: removed, auto-generated files.
|
