| Age | Commit message (Collapse) | Author |
|---|
|
[backport candidate]
|
|
Fixes bugzilla #89. [backport candidate]
|
|
deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient
lists.
[backport candidate]
|
|
[backport candidate]
|
|
neighbor x.x.x.x routemap [export|import] commands work again.
Fixes bugzilla #184. [backport candidate]
|
|
* bgp_fsm.h: Add extern qualifier to exported functions
* bgp_nexthop.c: add static to nexthop specific globals
* *.h: Add guard defines
|
|
* bgp_routemap.c: add semi-colons to VTY_GET_* to match vty.h change
|
|
* bgp_network.c: (bgp_accept) use XSTRDUP
* bgpd.c: (peer_delete) XFREE the correct memtype, not free.
(peer_create) use XSTRDUP
* bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used
(various) update -> s/bgp_stream_dup/stream_dup
|
|
* bgp_fsm.c: (bgp_stop) use sockunion_free, not XFREE..
* bgp_network.c: (bgp_getsockname) ditto
* bgp_routemap.c: (route_match_peer) ditto, als use a ret value and
remove one sockunion_free.
* bgpd.c: (peer_delete) ditto
|
|
Implement non-blocking zclient I/O with buffering.
* zclient.h (struct zclient): Add two fields to support non-blocking
I/O: struct buffer *wb, and struct thread *t_write.
(zclient_free): Remove function.
(zebra_redistribute_send): Change 2nd arg from socket fd to
struct zclient * (needed to support non-blocking I/O and buffering).
(zclient_send_message): New function to send an arbitrary
message with non-blocking I/O.
* zclient.c (zclient_new): Create write buffer.
(zclient_free): Remove unused function.
(zclient_stop): Must cancel new t_write thread. Also, reset
all buffers: ibuf, obuf, and wb.
(zclient_failed): New helper function for typical error handling.
(zclient_flush_data): New thread to flush queued data.
(zclient_send_message): New function to send the message in
zclient->obuf to zebra using non-blocking I/O and buffering.
(zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use
new zclient_send_message function instead of calling writen.
(zclient_start): Set socket non-blocking. Also, change 2nd arg
to zebra_redistribute_send from zclient->sock to zclient.
(zebra_redistribute_send): Change 2nd arg to struct zclient *.
Can now use zclient->obuf to assemble the message instead of
allocating a temporary stream. And call zclient_send_message to
send the message instead of writen.
(zclient_read): Convert to support non-blocking I/O by using
stream_read_try instead of deprecated stream_read.
(zclient_redistribute): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead
of writen.
* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,
rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):
The 2nd arg to zebra_redistribute_send is now zclient instead of
zclient->sock.
* isis_zebra.h (isis_zebra_finish): Remove declaration of unused
function.
* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message
to send the message to zebra instead of calling writen directly, since
zclient_send_message understands non-blocking I/O and will manage
the buffer queue appropriately.
(isis_zebra_finish): Remove unused function, particularly since
the zclient_free function has been removed.
|
|
family node.
[backport candidate]
|
|
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
no particular afi/safi configured.
[backport candidate]
|
|
work again.
|
|
transparent-nexthop" commands.
[merge from GNU Zebra]
|
|
[merge from GNU Zebra]
|
|
community-list cleanup.
[merge from GNU Zebra]
|
|
-> "disable-connected-check".
[merge from GNU Zebra]
|
|
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
|
|
capability route-refresh" commands. Route refresh capability is sent
anyway now. Preserve dummy deprecated commands.
[merge from GNU Zebra]
|
|
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor
version" command as deprecated.
[merge from GNU Zebra]
|
|
maximum-prefix limit" feature support.
[merge from GNU Zebra]
|
|
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
|
|
* buffer.h: Fix comment on buffer_getstr to reflect that it now
uses XMALLOC.
* buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc.
* filter.c: (access_list_remark,ipv6_access_list_remark) Use
argv_concat instead of buffer_getstr.
* if.c: (interface_desc) Use argv_concat instead of buffer_getstr.
* plist.c: (ip_prefix_list_description,ipv6_prefix_list_description)
Use argv_concat instead of buffer_getstr.
* bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead
of buffer_getstr.
* bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string
returned by buffer_getstr.
(bgp_show_community) Must use XFREE instead of free on string
returned by buffer_getstr.
* bgp_routemap.c: (set_community) Must use XFREE instead of free
on string returned by buffer_getstr.
* bgp_vty.c: (neighbor_description) Use argv_concat instead of
buffer_getstr.
|
|
if old one is flaged as BGP_INFO_ATTR_CHANGED.
|
|
configured or not. Being not configured is even better reason to
do it.
|
|
* bgp_packet.c: (bgp_write) set socket to nonblock while writing
this should be generalised. See bugzilla #102. Fix supplied by
wawa@yandex-team.ru (Vladimir Ivanov).
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
|
|
* bgp_nexthop.c: collapse bgp_connected_ipvX, bgp_nexthop_cache_ipvX
and cache{1,2}.. into arrays of tables and hence collapse
bgp_scan_ipv{4,6} into a single bgp_scan function. Tested, though
a long time ago (and this change was hand-merged).
|
|
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE
capabilities (that were used only in bgpd/bgp_route.c and are now
removed). Also remove some other fields that were not being
used at all.
* vty.c: (vty_execute) Do not test for obsolete status values VTY_START
and VTY_CONTINUE.
(vty_read) Remove calls to vty->output_func since that was part
of the VTY_CONTINUE infrastructure that has been removed.
(vty_flush) Remove code to support VTY_START and VTY_CONTINUE.
(vty_close) Remove code to cancel vty->t_output thread, since that
thread was never actually used.
* bgp_route.c: Remove all code related to VTY_CONTINUE; this feature
is deprecated because the output did not represent a single point
in time. All output needs to be generated inline and buffered
by the library code.
(route_vty_out,route_vty_out_tag,damp_route_vty_out,
flap_route_vty_out) Remove code to count number of lines of output,
since this was only useful for VTY_CONTINUE behavior.
(bgp_show_callback) Removed.
(bgp_show_table) Remove hooks for VTY_CONTINUE callback support.
As a result, there's a new output_arg argument to this function.
Make function static.
(bgp_show) Make function static and add a new output_arg argument.
Change all functions that call bgp_show or bgp_show_table to
pass the new output_arg argument (that used to be passed inside
vty->output_arg).
* bgp_mplsvpn.c: Remove declarations of functions defined in
bgp_route.c; these declarations belong in bgp_route.h.
* bgp_route.h: Declare 3 global functions used in both bgp_route.c
and in bgp_mplsvpn.c.
|
|
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
|
|
* Update with fix in debian bug id 222930.
* bgp_main.c: Add ZCAP_RAW, needed to bind to interfaces.
bgp_network.c: (....) raise/lower privs around call to
SO_BINDTODEVICE sockopt.
|
|
ripd might need some more testing though.
|
|
|
|
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
* (global) more const'ification and fixups of types to clean up code.
* bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect,
should use something like the VTY_GET_INTEGER macro, but without
the vty_out bits..
* bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE
(no_set_aggregator_as) ditto.
* bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is
returned, add comments about troublesome return value.
|
|
|
|
|
|
|
|
Merge of GNU Zebra cvs2svn changesets r799, r800 and r807.
* bgp_dump.c: (bgp_dump_attr) cleanup. return status code. check
attributes present before printing.
* bgp_dump.c: update bgp_dump_attr prototype.
* bgp_packet.c: (bgp_update_receive) init attrstr. check status
of bgp_dump_attr. Log end-of-rib UPDATEs.
|
|
* bgp_packet.c: (bgp_collision_detect) Send NOTIFY on new socket
if that is connection we're closing.
(bgp_read) invalid marker check applies to KEEPALIVE too.
* bgp_route.c: Ignore multicast NRLI, dont send NOTIFY.
|
|
* type mismatch fixes
|
|
repository by Rivo Nurges.
|
|
|
|
|
