| Age | Commit message (Collapse) | Author |
|---|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-12-07 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.c: Bug #302 fix, diagnosis, suggestions and testing
by Juergen Kammer <j.kammer@eurodata.de>. Fix follows from
his suggested fix, just made in a slightly different way.
(bgp_event) Transitions into Clearing always must call
bgp_clear_route_all().
(bgp_stop) No need to clear routes here, BGP FSM should do
it.
|
|
2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* bgp_debug.h: Declare new bgp_debug_zebra conf and term flags,
and define BGP_DEBUG_ZEBRA.
* bgp_debug.c: Declare conf_bgp_debug_zebra and term_bgp_debug_zebra.
(debug_bgp_zebra, no_debug_bgp_zebra, undebug_bgp_zebra) New
functions to enable/disable bgp zebra debugging.
(no_debug_bgp_all) Turn off zebra debugging.
(show_debugging_bgp) Show whether zebra debugging is on.
(bgp_config_write_debug) Add 'debug bgp zebra' if configured.
(bgp_debug_init) Add new zebra debugging commands.
* bgp_zebra.c: (bgp_router_id_update, bgp_interface_add,
bgp_interface_delete, bgp_interface_up, bgp_interface_down,
bgp_interface_address_add, bgp_interface_address_delete,
zebra_read_ipv4, zebra_read_ipv6, bgp_zebra_announce,
bgp_zebra_withdraw, bgp_redistribute_set, bgp_redistribute_unset)
If zebra debugging is enabled, log an appropriate debug message.
|
|
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* bgp_route.c: (bgp_info_restore) New function that undoes
the effects of a previous call to bgp_info_delete. This is
used when a route is deleted and quickly re-added before the
deletion has been processed.
(bgp_static_update_rsclient, bgp_static_update_main,
bgp_redistribute_add) Check whether a pre-existing route
has the BGP_INFO_REMOVED set, and, if so, we need to call
bgp_info_restore to resurrect it.
|
|
2006-10-27 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats) oops, u_intXX_t should be
uintXX_t
|
|
2006-10-19 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_new) bgp element of peer absolutely must be
filled in, make peer_new() require it as argument and update
all callers. Fixes a crash reported by Jan 'yanek' Bortl and
Andrew Schorr where bgpd would crash in bgp_pcount_adjust
trying to dereference the bgp member of bgp->peer_self,
triggered through redistribution.
* bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
|
|
NULL pointer.
2006-10-15 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_update_packet) adv->rn can not be NULL,
check is bogus - changed to assert(), CID#64.
binfo is checked for NULL, but then dereferenced
unconditionally, fix, CID #63.
(bgp_withdraw_packet) Assert adv->rn is valid, as with
bgp_update_packet().
|
|
emtpy table
2006-10-15 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats_walker) NULL deref if table is
empty, bgp_table_top may return NULL, Coverity CID#73.
|
|
stuck in Clearing.
2006-10-14 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.h: Remove BGP_EVENT_FLUSH_ADD, dangerous and not
needed.
* bgp_fsm.c: (bgp_stop) Move BGP_EVENT_FLUSH to the top of the
of the function, otherwise it could flush a ClearingCompleted
event, bug #302.
* bgp_packet.c: Replace all BGP_EVENT_FLUSH_ADD with
BGP_EVENT_ADD, fixing bug #302.
|
|
2006-09-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* bgpd.c: (peer_uptime) Fix printf format/arg mismatch in
zlog_warn message (%ld/size_t -> %lu/u_long).
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_process_queue_init) process queue hold time
too high, adds extra memory load. Change to be much lower,
until such time as it's made configurable.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats_walker) Address space announced
should only count top-level unaggregateable prefixes, to
avoid falling afoul of anti-dodgy-accounting regulations
in various jurisdictions.. ;)
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) fix the peer refcount issue exposed by previous, by
just removing refcounting of peer threads, which is mostly
senseless as they're references leading from struct peer,
which peer_free cancels anyway. No need to muck around..
* bgp_fsm.h: Just remove the refcounting from the various
TIMER/READ/WRITE/EVENT ON/OFF/ADD macros.
* bgp_fsm.c: (bgp_stop) use BGP_EVENT_FLUSH, no refcounts attached
to events anymore.
(bgp_event) remove peer_unlock, events not refcounted.
* bgpd.c: (peer_free) flush events before free.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
|
|
2006-09-13 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_highest) new, return highest ASN in an
aspath.
* bgp_route.c: (bgp_peer_count_walker) new, do the walk done
in bgp_peer_counts as a thread.
(bgp_peer_counts) move walk to previous and call it via
thread_execute so this RIB walk shows up in thread stats.
(bgp_table_stats) New, gather some statistics for a given
RIB.
(bgp_table_stats_walker) New, RIB walker thread for former.
(bgp_table_stats_vty) Parsing front-end for 'show bgp ...',
useful model for future rationalisation of 'show ... bgp'.
(bgp_route_init) Add new RIB stats commands.
|
|
2006-09-06 Paul Jakma <paul.jakma@sun.com>
* (general) Squash any and all prefix-count issues by
abstracting route flag changes, and maintaining count as and
when flags are modified (rather than relying on explicit
modifications of count being sprinkled in just the right
places throughout the code).
* bgp_route.c: (bgp_pcount_{dec,inc}rement) removed.
(bgp_pcount_adjust) new, update prefix count as
needed for a given route.
(bgp_info_{uns,s}et_flag) set/unset a BGP_INFO route status
flag, calling previous function when appropriate.
(general) Update all set/unsets of flags to use previous.
Remove pcount_{dec,inc}rement calls.
No need to unset BGP_INFO_VALID in places where
bgp_info_delete is called, it does that anyway.
* bgp_{damp,nexthop}.c: Update to use bgp_info_{un,}set_flag.
* bgp_route.h: Export bgp_info_{un,}set_flag.
Add a 'meta' BGP_INFO flag, BGP_INFO_UNUSEABLE.
Move BGP_INFO_HOLDDOWN macro to here from bgpd.h
|
|
2006-09-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: Add 'show ... bgp ... <neighbour> prefix-count'
commands, to provide detailed counts of prefixes for a peer.
Informative, and should help pin down to pfxcnt drift
problems.
|
|
2006-08-27 Paul Jakma <paul.jakma@sun.com>
* bgp_advertise.c: (bgp_sync_delete) fix mtype in XFREE.
NULL out peer->hash after free, to be sure.
|
|
2006-08-06 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_loop_check) Fix the typo-bug which
essentially had disabled this check. Problem reported by
Bartek Kania <mrbk@gnarf.org> in [quagga-users 7388].
* aspath_test.c: (validate) Fix the sense of the aspath_loop_check,
which was the wrong way around and had actually been testing for
aspath_loop_check to be buggy.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_delete) Ensure freed buffers can not be
accidently reused. A potential fix for bug #287.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain
bits of state from stop to start, as they may be used via
peer references on clearing queues..
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion
to make it clear it takes both address and ifname.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.{c,h}: (aspath_print_vty) take a format string,
so as to reduce burden on callers, all in bgp_route.c
* bgp_route.c: (route_vty_out{,tmp}) Update to match
aspath_print_vty, simplifying checks needed to get spacing
right. CID #4,#5.
({damp,flap}_route_vty_out) Ditto, CID #9, #10
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_rsclient) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #6.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_main) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #7.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_attr.c: (bgp_packet_attribute) Remove dead code, Coverity
CID #1
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_afi_node_get) given table should never be
NULL, check/assert this.
(bgp_static_update) Bug #240. Rsclients should only be passed
the static update if they are configured for the afi,safi.
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* bgp_community.c: (community_str2com) Coverity CID#62, fix
double-free, use-after-free.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (general) Fix logical bug in clearing, noted
by Chris Caputo in [quagga-users 6728] - clearing depended on
at least one route being added to workqueue, in order for
workqueue completion function to restart FSM. However, if no
routes are cleared, then the completion function never is
called, it needs to be called manually if the workqueue
didn't get scheduled.
Finally, clearing is per-peer-session, not per AFI/SAFI, so
the FSM synchronisation should be in bgp_clear_route_table.
(bgp_clear_route_table) Wrong place for FSM/clearing
synchronisation, move to..
(bgp_clear_route) FSM/clearing synchronisation should be
here.
If no routes were cleared, no workqueue scheduled, call
the completion func to ensure FSM kicks off again.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* (general) VPNv4 fixes. Certain VPNv4 code was not enabled.
See bug #210.
* bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be
u_char really.
* bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some
VPNv4 code which inexplicably was ifdef'd out. comments from
a tester on IRC suggest this fixes bug #210.
|
|
2006-03-30 Paul Jakma <paul.jakma@sun.com>
* bgp_community.c: (community_gettoken) Unknown token should
return NULL, to give a strong indication to callers that
the token no longer can be parsed, otherwise callers looping
on this function may have a hard time ending their loop.
(community_str2com) While loop around community_gettoken appears
to have been coded thinking that break statement would break
from the while{}, hence it could never exit for unknown token
case. Fix it to do..while, so it can use the NULL result from
community_gettoken easily.
|
|
2006-03-22 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_free) release the per-peer workqueue when
freeing the peer.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* memtypes.c: Add MTYPE_BGP_SYNCHRONISE.
* bgp_advertise.c: Use a distinct memory type for struct
bgp_synchronize.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* bgpd/bgp_vty.c: Add includes to get several structs we want
to provide usage statistics on.
(show_bgp_memory_cmd) Show memory usage stats for various
notable fixed size objects. Using mtype_stats_alloc and
mtype_memstr recently added to memory.c.
(bgp_show_summary) Report some additional stats specific to
the given BGP instance and/or AFI/SAFI such as table counts,
peers, rsclients and peer-groups.
(bgp_vty_init) Install show_bgp_memory_cmd.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* bgp_nexthop.h: Include if.h as a dependent header, for struct
connected.
|
|
2006-03-12 Paul Jakma <paul.jakma@sun.com>
* bgp_attr.h: (struct attr) rearrange fields to avoid
wasted padding between them as much as possible.
(attr_count,attr_unknown_count) export new functions to
return number of counts of cached attributes.
* bgp_attr.c: (attr_count,attr_unknown_count) new functions to
return number of counts of cached attributes.
* bgp_route.h: (struct bgp_info) rearrange fields to avoid
wasted padding.
* bgp_table.h: (struct bgp_table) Add a count field, of number
of nodes in the table.
(struct bgp_node) rearrange fields to avoid
wasted padding between them, though I don't think there
was any in this case.
* bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count.
(bgp_table_count) new function to access the table count.
|
|
2006-03-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_clear_node_complete) Doh. When clearing
is complete we need to kick off FSM again.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description
to state of peer while it's suppressed due to clearing.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_announce_check) trivial, move declaration
of two local variables into the only block where they are
used, to aid the reader.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_routemap.c: (route_set_community) Quick, very hacky, fix
for the set-community leak, bug #89. True fix will be to
detangle the web of *_intern caching and provide saner object
caching for Quagga, future work.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_gettoken) fix gcc warning about
possible uninitialised usage.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: Add BGP_INFO_COUNTED to track whether
prefix has been counted or not.
* bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to
centralise inc/dec of prefix-count,
(bgp_rib_remove) Remove pcount decrement, use helper.
(bgp_rib_withdraw) ditto, additionally use previous function
too.
(bgp_update_main) Use pcount helpers.
(bgp_clear_route_node) ditto, aslo REMOVED routes don't need
clearing.
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove the delay field.
It served no purpose and just introduced bad behaviour.
Should be excised before its allowed to escape into 1.0.
This removes need for the 'flood' and runs_since_clear
fields.
* workqueue.c: (general) excise delay factor between queue
runs, hence the 'flood' crap too.. See above.
* bgp_route.c: (bgp_{clear_node,process}_queue_init) delay
field is removed from workqueue spec.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* bgp_nexthop.c: (zlookup_read*) convert to new Zserv format.
(zlookup_query_ipv6) ditto.
(bgp_import_check) ditto.
* isis_zebra.c: (isis_zebra_route_add_ipv4) fix for new
zserv format.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c:
(aspath_snmp_pathseg) move the static stream pointer out to
file scope, so it can be freed.
(aspath_finish) new function, free aspath resources.
* bgp_aspath.h: (aspath_finish) export.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_append_asns) XREALLOC can return
NULL theoretically, take care not to lose the allocated data.
(aspath_hash_alloc) aspath_dup already set the aspath
string - fix leak.
(aspath_parse) aspath_hash_alloc dupes the entire aspath,
including segments, but we forgot to free the temporary
assegment.
|
|
2006-01-10 Juris Kalnins <juris@mt.lv>
* bgpd.h: (bgp_router_id_unset) ex-function, remove.
|
|
2005-11-23 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegments_parse) should be static
2005-11-23 Juergen Kammer <j.kammer@eurodata.de>
* bgp_aspath.c: (aspath_cmp_left_confed) fix SEGV for case
where one or both paths are empty.
|
