summaryrefslogtreecommitdiff
path: root/bgpd/ChangeLog
AgeCommit message (Collapse)Author
2005-05-25 * bgpd.c: Fix obvious (routeserver patch) merge error. This makes "nohasso
neighbor x.x.x.x routemap [export|import] commands work again. Fixes bugzilla #184. [backport candidate]
2005-05-232005-05-23 Paul Jakma <paul@dishone.st>paul
* bgp_fsm.h: Add extern qualifier to exported functions * bgp_nexthop.c: add static to nexthop specific globals * *.h: Add guard defines
2005-05-232005-05-23 Paul Jakma <paul@dishone.st>paul
* bgp_routemap.c: add semi-colons to VTY_GET_* to match vty.h change
2005-05-192005-05-19 Paul Jakma <paul@dishone.st>paul
* bgp_network.c: (bgp_accept) use XSTRDUP * bgpd.c: (peer_delete) XFREE the correct memtype, not free. (peer_create) use XSTRDUP * bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used (various) update -> s/bgp_stream_dup/stream_dup
2005-05-192005-05-19 Paul Jakma <paul@dishone.st>paul
* bgp_fsm.c: (bgp_stop) use sockunion_free, not XFREE.. * bgp_network.c: (bgp_getsockname) ditto * bgp_routemap.c: (route_match_peer) ditto, als use a ret value and remove one sockunion_free. * bgpd.c: (peer_delete) ditto
2005-04-112005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Implement non-blocking zclient I/O with buffering. * zclient.h (struct zclient): Add two fields to support non-blocking I/O: struct buffer *wb, and struct thread *t_write. (zclient_free): Remove function. (zebra_redistribute_send): Change 2nd arg from socket fd to struct zclient * (needed to support non-blocking I/O and buffering). (zclient_send_message): New function to send an arbitrary message with non-blocking I/O. * zclient.c (zclient_new): Create write buffer. (zclient_free): Remove unused function. (zclient_stop): Must cancel new t_write thread. Also, reset all buffers: ibuf, obuf, and wb. (zclient_failed): New helper function for typical error handling. (zclient_flush_data): New thread to flush queued data. (zclient_send_message): New function to send the message in zclient->obuf to zebra using non-blocking I/O and buffering. (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use new zclient_send_message function instead of calling writen. (zclient_start): Set socket non-blocking. Also, change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. (zebra_redistribute_send): Change 2nd arg to struct zclient *. Can now use zclient->obuf to assemble the message instead of allocating a temporary stream. And call zclient_send_message to send the message instead of writen. (zclient_read): Convert to support non-blocking I/O by using stream_read_try instead of deprecated stream_read. (zclient_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead of writen. * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): The 2nd arg to zebra_redistribute_send is now zclient instead of zclient->sock. * isis_zebra.h (isis_zebra_finish): Remove declaration of unused function. * isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message to send the message to zebra instead of calling writen directly, since zclient_send_message understands non-blocking I/O and will manage the buffer queue appropriately. (isis_zebra_finish): Remove unused function, particularly since the zclient_free function has been removed.
2005-04-09 * bgp_vty.c: Make "exit-address-family" work in IPv4 unicast addresshasso
family node. [backport candidate]
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2005-04-022005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Fix problems when netlink interfaces are renamed (same ifindex used for a new interface). Start cleaning up some problems with the way interface names are handled. * interface.c: (if_new_intern_ifindex) Remove obsolete function. (if_delete_update) After distributing the interface deletion message, set ifp->ifindex to IFINDEX_INTERNAL. (if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is IFINDEX_INTERNAL. (zebra_interface) Check return code from interface_cmd.func. Do not set internal ifindex values to if_new_intern_ifindex(), since we now use IFINDEX_INTERNAL for all pseudo interfaces. * kernel_socket.c: (ifm_read) Fix code and comments to reflect that all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL. * rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex. Detects interface rename events by checking if that ifindex is already being used. If it is, delete the old interface before assigning the ifindex to the new interface. (netlink_interface, netlink_link_change) Call set_ifindex to update the ifindex. * if.h: Remove define for IFINDEX_INTERNBASE and add define IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo- interfaces should have ifindex set to 0. (if_new) Remove function. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (ifname2ifindex) New function. * if.c: (if_new) Remove function (absorb into if_create). (if_create) Replace function if_new with call to calloc. Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error in assert to check length of interface name. Add error message if interface with this name already exists. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (if_delete) Implement with help of if_delete_retain. (ifindex2ifname) Reimplement using if_lookup_by_index. (ifname2ifindex) New function to complement ifindex2ifname. (interface) The interface command should check the name length and fail with a warning message if it is too long. (no_interface) Fix spelling in warning message. (if_nametoindex) Reimplement using if_lookup_by_name. (if_indextoname, ifaddr_ipv4_lookup) Reimplement using if_lookup_by_index. * bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead of if_delete, since it is generally not safe to remove interface structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Tighten up code. * ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function was commented out. But this is not safe: we should at least update the ifindex when the interface is deleted. So the new version updates the interface status and sets ifp->ifindex to IFINDEX_INTERNAL. (ospf6_zebra_route_update) Use if_indextoname properly. * ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface flags to help with debugging. * ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Make function static. Tighten up code. * rip_interface.c: (rip_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * ripng_interface.c: (ripng_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
2005-03-21 * bgp_route.c: Don't crash while clearing route tables if there ishasso
no particular afi/safi configured. [backport candidate]
2005-02-23 * bgp_route.c: Make reannouncing prefixes with changed attributeshasso
work again.
2005-02-02 * bgp_vty.c: Deprecate "neighbor transparent-as" and "neighborhasso
transparent-nexthop" commands. [merge from GNU Zebra]
2005-02-02 * bgp_routemap.c: New route-map command - "match ip route-source".hasso
[merge from GNU Zebra]
2005-02-02 * bgp_clist.[ch], bgp_route.c, bgp_routemap.c, bgp_vty.c:hasso
community-list cleanup. [merge from GNU Zebra]
2005-02-02 * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop"hasso
-> "disable-connected-check". [merge from GNU Zebra]
2005-02-02 * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c,hasso
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp graceful-restart" commands added. Show numbers of individual messages in "show ip bgp neighbor" command. Final pieces of graceful restart. [merge from GNU Zebra]
2005-02-01 * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighborhasso
capability route-refresh" commands. Route refresh capability is sent anyway now. Preserve dummy deprecated commands. [merge from GNU Zebra]
2005-02-01 * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for oldhasso
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor version" command as deprecated. [merge from GNU Zebra]
2005-02-01 * bgpd.[ch], bgp_vty.c, bgp_route.c: "Restart session afterhasso
maximum-prefix limit" feature support. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* buffer.h: Fix comment on buffer_getstr to reflect that it now uses XMALLOC. * buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc. * filter.c: (access_list_remark,ipv6_access_list_remark) Use argv_concat instead of buffer_getstr. * if.c: (interface_desc) Use argv_concat instead of buffer_getstr. * plist.c: (ip_prefix_list_description,ipv6_prefix_list_description) Use argv_concat instead of buffer_getstr. * bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead of buffer_getstr. * bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string returned by buffer_getstr. (bgp_show_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_routemap.c: (set_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_vty.c: (neighbor_description) Use argv_concat instead of buffer_getstr.
2005-01-24 * bgp_route.c: Fix showstopper bug. New route must be selected alsohasso
if old one is flaged as BGP_INFO_ATTR_CHANGED.
2005-01-17 * bgp_route.c: Clear peer's routing table regardless whether it'shasso
configured or not. Being not configured is even better reason to do it.
2005-01-052005-01-05 Paul Jakma <paul@dishone.st>paul
* bgp_packet.c: (bgp_write) set socket to nonblock while writing this should be generalised. See bugzilla #102. Fix supplied by wawa@yandex-team.ru (Vladimir Ivanov).
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-11-092004-11-09 Paul Jakma <paul@dishone.st>paul
* bgp_nexthop.c: collapse bgp_connected_ipvX, bgp_nexthop_cache_ipvX and cache{1,2}.. into arrays of tables and hence collapse bgp_scan_ipv{4,6} into a single bgp_scan function. Tested, though a long time ago (and this change was hand-merged).
2004-11-052004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE capabilities (that were used only in bgpd/bgp_route.c and are now removed). Also remove some other fields that were not being used at all. * vty.c: (vty_execute) Do not test for obsolete status values VTY_START and VTY_CONTINUE. (vty_read) Remove calls to vty->output_func since that was part of the VTY_CONTINUE infrastructure that has been removed. (vty_flush) Remove code to support VTY_START and VTY_CONTINUE. (vty_close) Remove code to cancel vty->t_output thread, since that thread was never actually used. * bgp_route.c: Remove all code related to VTY_CONTINUE; this feature is deprecated because the output did not represent a single point in time. All output needs to be generated inline and buffered by the library code. (route_vty_out,route_vty_out_tag,damp_route_vty_out, flap_route_vty_out) Remove code to count number of lines of output, since this was only useful for VTY_CONTINUE behavior. (bgp_show_callback) Removed. (bgp_show_table) Remove hooks for VTY_CONTINUE callback support. As a result, there's a new output_arg argument to this function. Make function static. (bgp_show) Make function static and add a new output_arg argument. Change all functions that call bgp_show or bgp_show_table to pass the new output_arg argument (that used to be passed inside vty->output_arg). * bgp_mplsvpn.c: Remove declarations of functions defined in bgp_route.c; these declarations belong in bgp_route.h. * bgp_route.h: Declare 3 global functions used in both bgp_route.c and in bgp_mplsvpn.c.
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
2004-10-252004-10-25 Paul Jakma <paul@dishone.st>paul
* Update with fix in debian bug id 222930. * bgp_main.c: Add ZCAP_RAW, needed to bind to interfaces. bgp_network.c: (....) raise/lower privs around call to SO_BINDTODEVICE sockopt.
2004-10-19OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,hasso
ripd might need some more testing though.
2004-10-13Make dump configuration appear in vtysh.hasso
2004-10-13Ladies and Gentlemens. This file is dead for years, from 1999 to be exact.hasso
2004-10-13Make initializing smux connection configurable - "smux peer OID" commandhasso
initializes connection, and "no smux peer" command terminates it. Fixes bugzilla #47 and #112.
2004-10-132004-10-13 Paul Jakma <paul@dishone.st>paul
* (global) more const'ification and fixups of types to clean up code. * bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect, should use something like the VTY_GET_INTEGER macro, but without the vty_out bits.. * bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE (no_set_aggregator_as) ditto. * bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is returned, add comments about troublesome return value.
2004-10-03Common router id.hasso
2004-09-26Compiler warnings fixes.hasso
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-07-092004-07-09 Paul Jakma <paul@dishone.st>paul
Merge of GNU Zebra cvs2svn changesets r799, r800 and r807. * bgp_dump.c: (bgp_dump_attr) cleanup. return status code. check attributes present before printing. * bgp_dump.c: update bgp_dump_attr prototype. * bgp_packet.c: (bgp_update_receive) init attrstr. check status of bgp_dump_attr. Log end-of-rib UPDATEs.
2004-07-092004-07-09 Sowmini Varadhan <sowmini.varadhan@sun.com>paul
* bgp_packet.c: (bgp_collision_detect) Send NOTIFY on new socket if that is connection we're closing. (bgp_read) invalid marker check applies to KEEPALIVE too. * bgp_route.c: Ignore multicast NRLI, dont send NOTIFY.
2004-06-042004-06-04 Paul Jakma <paul@dishone.st>paul
* type mismatch fixes
2004-05-21Merge graceful restart capability display and some small fixes from Zebrahasso
repository by Rivo Nurges.
2004-05-20Merge bgpd changeset 1185 from Zebra repository by Rivo Nurges.hasso
2004-05-20Merge bgpd changeset 1184 from Zebra repository by Rivo Nurges.hasso
2004-05-20Merge bgpd changeset 1176 from Zebra repository by Rivo Nurges.hasso
2004-05-082004-05-08 Paul Jakma <paul@dishone.st>paul
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes (bgp_interface_address_delete) ditto. (bgp_zebra_announce) ditto. (bgp_zebra_withdraw) ditto. * isis_zebra.c: Sync with zclient changes. * zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe message format. * ospf6_zebra.c: Sync to zclient changes * ospf_zebra.c: Sync with lib/zclient changes * rip_zebra.c: sync with zclient changes. * rip_interface.c: ditto. * ripng_{interface,zebra}.c: sync with zclient changes 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com> * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route (zapi_ipv4_delete) ditto. (zapi_ipv4_route) add/delete a route by way of cmd arg. (zapi_ipv6_add) collapsed into zapi_ipv6_route. (zapi_ipv6_delete) ditto. (zapi_ipv6_route) add/delete a route by way of cmd arg. (zebra_interface_address_delete_read) collapsed into zebra_interface_address_read. (zebra_interface_address_delete_read) ditto. (zebra_interface_address_read) read address add/delete messages by way of type argument. Describe command message format. (zebra_interface_add_read) Unconditionally read new ifmtu6 field. Describe command message format. (zebra_interface_state_read) Unconditionally read new ifmtu6 field. (zclient_redistribute_set) Collapsed into zclient_redistribute (zclient_redistribute_unset) ditto (zclient_redistribute) set/unset redistribution. (zclient_redistribute_default_set) Collapsed into zclient_redistribute_default. (zclient_redistribute_default_unset) ditto. (zclient_redistribute_default) Redistribute default set/unset. * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add zclient_redistribute. Ditto for zclient_redistribute_default_{set/unset}.
2004-05-032004-05-03 Daniel Roesen <dr@cluenet.de>paul
* bgp_fsm.c: (bgp_stop) Reset uptime only on transition from Established so that it reflects true downtime (rather time since last transition, eg Active->Idle)
2004-05-012004-05-01 rivo nurges <rix@estpak.ee>paul
* bgp_route.c: fix UNH IOL BGP-4.1.12f