| Age | Commit message (Collapse) | Author |
|---|
|
2006-09-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: Add 'show ... bgp ... <neighbour> prefix-count'
commands, to provide detailed counts of prefixes for a peer.
Informative, and should help pin down to pfxcnt drift
problems.
|
|
2006-08-27 Paul Jakma <paul.jakma@sun.com>
* bgp_advertise.c: (bgp_sync_delete) fix mtype in XFREE.
NULL out peer->hash after free, to be sure.
|
|
2006-08-06 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_loop_check) Fix the typo-bug which
essentially had disabled this check. Problem reported by
Bartek Kania <mrbk@gnarf.org> in [quagga-users 7388].
* aspath_test.c: (validate) Fix the sense of the aspath_loop_check,
which was the wrong way around and had actually been testing for
aspath_loop_check to be buggy.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_delete) Ensure freed buffers can not be
accidently reused. A potential fix for bug #287.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain
bits of state from stop to start, as they may be used via
peer references on clearing queues..
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion
to make it clear it takes both address and ifname.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.{c,h}: (aspath_print_vty) take a format string,
so as to reduce burden on callers, all in bgp_route.c
* bgp_route.c: (route_vty_out{,tmp}) Update to match
aspath_print_vty, simplifying checks needed to get spacing
right. CID #4,#5.
({damp,flap}_route_vty_out) Ditto, CID #9, #10
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_rsclient) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #6.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_main) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #7.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_attr.c: (bgp_packet_attribute) Remove dead code, Coverity
CID #1
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_afi_node_get) given table should never be
NULL, check/assert this.
(bgp_static_update) Bug #240. Rsclients should only be passed
the static update if they are configured for the afi,safi.
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* bgp_community.c: (community_str2com) Coverity CID#62, fix
double-free, use-after-free.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (general) Fix logical bug in clearing, noted
by Chris Caputo in [quagga-users 6728] - clearing depended on
at least one route being added to workqueue, in order for
workqueue completion function to restart FSM. However, if no
routes are cleared, then the completion function never is
called, it needs to be called manually if the workqueue
didn't get scheduled.
Finally, clearing is per-peer-session, not per AFI/SAFI, so
the FSM synchronisation should be in bgp_clear_route_table.
(bgp_clear_route_table) Wrong place for FSM/clearing
synchronisation, move to..
(bgp_clear_route) FSM/clearing synchronisation should be
here.
If no routes were cleared, no workqueue scheduled, call
the completion func to ensure FSM kicks off again.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* (general) VPNv4 fixes. Certain VPNv4 code was not enabled.
See bug #210.
* bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be
u_char really.
* bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some
VPNv4 code which inexplicably was ifdef'd out. comments from
a tester on IRC suggest this fixes bug #210.
|
|
2006-03-30 Paul Jakma <paul.jakma@sun.com>
* bgp_community.c: (community_gettoken) Unknown token should
return NULL, to give a strong indication to callers that
the token no longer can be parsed, otherwise callers looping
on this function may have a hard time ending their loop.
(community_str2com) While loop around community_gettoken appears
to have been coded thinking that break statement would break
from the while{}, hence it could never exit for unknown token
case. Fix it to do..while, so it can use the NULL result from
community_gettoken easily.
|
|
2006-03-22 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_free) release the per-peer workqueue when
freeing the peer.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* memtypes.c: Add MTYPE_BGP_SYNCHRONISE.
* bgp_advertise.c: Use a distinct memory type for struct
bgp_synchronize.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* bgpd/bgp_vty.c: Add includes to get several structs we want
to provide usage statistics on.
(show_bgp_memory_cmd) Show memory usage stats for various
notable fixed size objects. Using mtype_stats_alloc and
mtype_memstr recently added to memory.c.
(bgp_show_summary) Report some additional stats specific to
the given BGP instance and/or AFI/SAFI such as table counts,
peers, rsclients and peer-groups.
(bgp_vty_init) Install show_bgp_memory_cmd.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* bgp_nexthop.h: Include if.h as a dependent header, for struct
connected.
|
|
2006-03-12 Paul Jakma <paul.jakma@sun.com>
* bgp_attr.h: (struct attr) rearrange fields to avoid
wasted padding between them as much as possible.
(attr_count,attr_unknown_count) export new functions to
return number of counts of cached attributes.
* bgp_attr.c: (attr_count,attr_unknown_count) new functions to
return number of counts of cached attributes.
* bgp_route.h: (struct bgp_info) rearrange fields to avoid
wasted padding.
* bgp_table.h: (struct bgp_table) Add a count field, of number
of nodes in the table.
(struct bgp_node) rearrange fields to avoid
wasted padding between them, though I don't think there
was any in this case.
* bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count.
(bgp_table_count) new function to access the table count.
|
|
2006-03-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_clear_node_complete) Doh. When clearing
is complete we need to kick off FSM again.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description
to state of peer while it's suppressed due to clearing.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_announce_check) trivial, move declaration
of two local variables into the only block where they are
used, to aid the reader.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_routemap.c: (route_set_community) Quick, very hacky, fix
for the set-community leak, bug #89. True fix will be to
detangle the web of *_intern caching and provide saner object
caching for Quagga, future work.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_gettoken) fix gcc warning about
possible uninitialised usage.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: Add BGP_INFO_COUNTED to track whether
prefix has been counted or not.
* bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to
centralise inc/dec of prefix-count,
(bgp_rib_remove) Remove pcount decrement, use helper.
(bgp_rib_withdraw) ditto, additionally use previous function
too.
(bgp_update_main) Use pcount helpers.
(bgp_clear_route_node) ditto, aslo REMOVED routes don't need
clearing.
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove the delay field.
It served no purpose and just introduced bad behaviour.
Should be excised before its allowed to escape into 1.0.
This removes need for the 'flood' and runs_since_clear
fields.
* workqueue.c: (general) excise delay factor between queue
runs, hence the 'flood' crap too.. See above.
* bgp_route.c: (bgp_{clear_node,process}_queue_init) delay
field is removed from workqueue spec.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* bgp_nexthop.c: (zlookup_read*) convert to new Zserv format.
(zlookup_query_ipv6) ditto.
(bgp_import_check) ditto.
* isis_zebra.c: (isis_zebra_route_add_ipv4) fix for new
zserv format.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c:
(aspath_snmp_pathseg) move the static stream pointer out to
file scope, so it can be freed.
(aspath_finish) new function, free aspath resources.
* bgp_aspath.h: (aspath_finish) export.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_append_asns) XREALLOC can return
NULL theoretically, take care not to lose the allocated data.
(aspath_hash_alloc) aspath_dup already set the aspath
string - fix leak.
(aspath_parse) aspath_hash_alloc dupes the entire aspath,
including segments, but we forgot to free the temporary
assegment.
|
|
2006-01-10 Juris Kalnins <juris@mt.lv>
* bgpd.h: (bgp_router_id_unset) ex-function, remove.
|
|
2005-11-23 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegments_parse) should be static
2005-11-23 Juergen Kammer <j.kammer@eurodata.de>
* bgp_aspath.c: (aspath_cmp_left_confed) fix SEGV for case
where one or both paths are empty.
|
|
* zebra_rib.c: (rib_process) convert to new workqueue specs and
shut up gcc, which complains about cast from void via
function parameters, for some dumb reason. Do the cast
inside the function instead.
(rib_queue_qnode_del) ditto.
(rib_queue_init) no need for the casts anymore.
|
|
* bgp_damp.c: (bgp_reuse_timer) struct bgp can be retrieved via
the struct bgp_damp_info, no need to guess by using
bgp_get_default().
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* bgp_packet.c: fix compilation when DEBUG is used.
|
|
* Makefile.am: bgpd shouldn't list libgp's sources as its own.
Use LDADD.
* bgp_aspath.h:
(struct assegment) New struct, abstract representation of a
list of AS_PATH segments and the contained ASNs.
(struct aspath) Remove the raw-data related
fields, reference the abstract struct assegment instead.
Remove several other computed fields, it's just a
headache to maintain them and they're cheap to compute from
struct assegment.
(aspath_parse) parse a stream, not a pointer to raw data.
(aspath_count_{hops,confeds,size}) helpers to access
information formerly directly contained in struct aspath.
(aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants
to be able to output hex representation of raw data.
* bgp_aspath.c: (general) partial-rewrite. Store aspath data
as an abstract singly-linked list of abstract segments,
rather than storing the raw data, and parsing it each and
every time. Remove several count/size fields which are cheap
to compute from the abstract segment structure.
(global) Include stream.h, needed for aspath_parse, and
others. Couple of helper macros added.
(struct assegment_header) Just the header, and only the
header.
(assegment_data_{new,free}) convenience functions for
AS_SEG_DATA allocation, the dynamic, per-segment array of
ASNs.
(assegment_{new,free,free_all,dup,dup_all}) convenience
functions for creating struct assegments. The _all forms will
follow the entire chain of segments from the given segment.
(assegment_prepend_asns) new function, prepend an ASN N times
to segment.
(assegment_append_asns) Append a list (array) of ASNs to
segment.
(int_cmp) convenience function for the aspath hash.
(assegment_normalise) new function. Normalise the given
segment chain to meet expectations of Quagga, and to
eliminate differing raw representations of the same paths.
Merge 'runs' of SEQUENCEs into one segment as our internal
segment is not limited by the protocol AS_PATH segment
length. Sort ASNs in SETs.
(aspath_new) Take void argument to quell warnings. Use the
assegment convenience functions.
(assegment_count_{asns,confeds,hops}) new functions to
compute at runtime values previously held in struct aspath.
(aspath_size) ditto.
(aspath_make_str_count) rewritten to stringify new
representation, and to be slightly easier to understand
hopefully.
(aspath_str_update) convenience function, update the aspath
str. Should investigate removing maintained string from
struct aspath, just run-time compute it, as per other fields.
It's just a maintenance headache, would save noticeable
amount of RAM with possibly not much extra run-time cost.
(aspath_dup) use the assegment dup functions.
(aspath_hash_alloc) Take void * argument to satisfy gcc. Use
the proper helper functions to dup data.
(assegments_parse) new function. parse raw AS_PATH data into
struct assegments. Normalise and return the head of the list.
(aspath_parse) Parse a stream, not pointer to raw data and
use assegments_parse to do it.
(assegment_data_put) Write out a single segment data in protocol
form to stream.
(assegment_header_put) ditto but for segment header.
(aspath_put) new function. As per previous but for an entire
struct aspath.
(aspath_snmp_pathseg) wrapper around aspath_put for
bgp_snmp.c. Uses a static buffer sadly.
(aspath_aggregate_as_set_add) rewritten to use assegments.
(aspath_aggregate) ditto
(aspath_{firstas,loop,private_as}_check) ditto
(aspath_{merge,prepend,add_one_as}) ditto
(aspath_cmp_left{_confed}) ditto
(aspath_delete_confed_seq) ditto, plus fixed to properly
delete all leading confed segments.
(aspath_as_add) Just use assegment_append_asns.
(aspath_segment_add) updated to use assegments.
(enum as_token) Add values for confeds
(aspath_gettoken) Add support for confeds
(aspath_str2aspath) ditto
(aspath_key_make) updated to use as_segments. Also, add
segment type into the hash value as appropriate.
(aspath_cmp) updated to use as_segments.
(aspath_print) don't segfault on NULL argument.
* bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream
now. No need for manual forwarding of stream.
(bgp_packet_attribute) empty aspath is now denoted by NULL
segment field, length is gone.
Use aspath_size() to determine size.
(bgp_attr_init) Fix declaration, explicitely specify void
arg.
(bgp_dump_routes_attr) Use aspath_size() to determine size.
* bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions.
(bgp_rib_withdraw) remove unused variable. Use
aspath_count_hops.
* bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use
aspath_snmp_pathseg to get the representation.
|
|
* bgp_vty.c: (bgp_vty_init) gcc 4 compile fix. static
function declarations shouldn't be inside functions.
* bgp_dump.c: (bgp_dump_interval_add) ditto.
|
|
introduced long time ago with route server patch. Hopefully
it's last case to fix - route-server client not in peer group.
[backport candidate]
|
|
* bgp_vty.c: (general) Add support for BGP IPv6 Multicast SAFI
commands and BGP_IPV6M_NODE.
|
|
* bgp_route.h: (struct bgp_info) add a new flag, BGP_INFO_REMOVED.
BGP_INFO_VALID is already overloaded, don't care to do same thing
to STALE or HISTORY.
* bgpd.h: (BGP_INFO_HOLDDOWN) Add INFO_REMOVED to the macro, as a
route which should generally be ignored.
* bgp_route.c: (bgp_info_delete) Just set the REMOVE flag, rather
than doing actual work, so that bgp_process (called directly,
or indirectly via the scanner) can catch withdrawn routes.
(bgp_info_reap) Actually remove the route, what bgp_info_delete
used to do, only for use by bgp_process.
(bgp_best_selection) reap any REMOVED routes, other than the old
selected route.
(bgp_process_rsclient) reap the old-selected route, if appropriate
(bgp_process_main) ditto
(bgp_rib_withdraw, bgp_rib_remove) make them more consistent with
each other. Don't play games with the VALID flag, bgp_process
is async now, so it didn't make a difference anyway.
Remove the 'force' argument from bgp_rib_withdraw, withdraw+force
is equivalent to bgp_rib_remove. Update all its callers.
(bgp_update_rsclient) bgp_rib_withdraw and force set is same as
bgp_rib_remove.
(route_vty_short_status_out) new helper to print the leading
route-status string used in many command outputs. Consolidate.
(route_vty_out, route_vty_out_tag, damp_route_vty_out,
flap_route_vty_out) use route_vty_short_status_out rather than
duplicate.
(route_vty_out_detail) print state of REMOVED flag.
(BGP_SHOW_SCODE_HEADER) update for Removed flag.
|
|
2005-05-27. While ecommunity fix seems to be correct, community case
isn't.
Fixes bugzilla #209.
[backport candidate]
|
|
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
|
|
* bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its
possible to terminate bgpd before workqueues were setup, causing
an abort/crash. Reported by Ashish Mehta of Sun.
|
|
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us
add work_queues for bgp_process.
* bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount.
Add bgp_info_{lock,unlock} helper functions.
Add bgp_info_{add,delete} helpers, to remove need for
users managing locking/freeing of bgp_info and bgp_node's.
* bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and
BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of
nodes.
* bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock
peer reference as appropriate.
* bgpd/bgp_damp.c: Remove its internal prototypes for
bgp_info_delete/free. Just use bgp_info_delete.
* bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers.
(struct peer) Add reference count 'lock'
(peer_lock,peer_unlock) New helpers to take/release reference
on struct peer.
* bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting
and balance how references are taken and released.
(bgp_advertise_free) release bgp_info reference, if appropriate
(bgp_adj_out_free) unlock peer
(bgp_advertise_clean) leave the adv references alone, or else
call bgp_advertise_free cant unlock them.
(bgp_adj_out_set) lock the peer on new adj's, leave the reference
alone otherwise. lock the new bgp_info reference.
(bgp_adj_in_set) lock the peer reference
(bgp_adj_in_remove) and unlock it here
(bgp_sync_delete) make hash_free on peer conditional, just in
case.
* bgpd/bgp_fsm.c: (general) document that the timers depend on
bgp_event to release a peer reference.
(bgp_fsm_change_status) moved up the file, unchanged.
(bgp_stop) Decrement peer lock as many times as cancel_event
canceled - shouldnt be needed but just in case.
stream_fifo_clean of obuf made conditional, just in case.
(bgp_event) always unlock the peer, regardless of return value
of bgp_fsm_change_status.
* bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's.
(bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs
along with a comment on it.
* bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup
some of the resource management around bgp_info. Refcount peer.
Add workqueues for bgp_process and clear_table.
(bgp_info_new) make static
(bgp_info_free) Ditto, and unlock the peer reference.
(bgp_info_lock,bgp_info_unlock) new exported functions
(bgp_info_add) Add a bgp_info to a bgp_node in correct fashion,
taking care of reference counts.
(bgp_info_delete) do the opposite of bgp_info_add.
(bgp_process_rsclient) Converted into a work_queue work function.
(bgp_process_main) ditto.
(bgp_processq_del) process work queue item deconstructor
(bgp_process_queue_init) process work queue init
(bgp_process) call init function if required, set up queue item
and add to queue, rather than calling process functions directly.
(bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts
(bgp_rib_withdraw) ditto
(bgp_update_rsclient) let bgp_info_add manage refcounts
(bgp_update_main) ditto
(bgp_clear_route_node) clear_node_queue work function, does
per-node aspects of what bgp_clear_route_table did previously
(bgp_clear_node_queue_del) clear_node_queue item delete function
(bgp_clear_node_complete) clear_node_queue completion function,
it unplugs the process queues, which have to be blocked while
clear_node_queue is being processed to prevent a race.
(bgp_clear_node_queue_init) init function for clear_node_queue
work queues
(bgp_clear_route_table) Sets up items onto a workqueue now, rather
than clearing each node directly. Plugs both process queues to
avoid potential race.
(bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage
bgp_info refcounts.
(bgp_static_update_rsclient) ditto
(bgp_static_update_main) ditto
(bgp_static_update_vpnv4) ditto, remove unneeded cast.
(bgp_static_withdraw) see bgp_static_withdraw_rsclient
(bgp_static_withdraw_vpnv4) ditto
(bgp_aggregate_{route,add,delete}) ditto
(bgp_redistribute_{add,delete,withdraw}) ditto
* bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer
reference
(peer_rsclient_unset_vty) ditto, but unlock same reference
* bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime
of struct peer.
(peer_lock,peer_unlock) peer refcount helpers
(peer_new) add initial refcounts
(peer_create,peer_create_accept) lock peer as appropriate
(peer_delete) unlock as appropriate, move out some free's to
peer_free.
(peer_group_bind,peer_group_unbind) peer refcounting as
appropriate.
(bgp_create) check CALLOC return value.
(bgp_terminate) free workqueues too.
* lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and
MTYPE_BGP_CLEAR_NODE_QUEUE
|
|
[backport candidate]
|
|
Fixes bugzilla #89. [backport candidate]
|
|
deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient
lists.
[backport candidate]
|
