| Age | Commit message (Collapse) | Author |
|---|
|
The correct method to link to NetSNMP is to use net-snmp-config (which
is like pkg-config). Explicit link to libcrypto is also dropped
(NetSNMP libs are linked to libcrypto, no need to link Quagga to
it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a
bug in configure.ac, it was properly populated.
|
|
Some .h files in lib/ are autogenerated. The search path should
include the build directory and the source directory. They usually
match but sometimes, they may be different. For example:
$ mkdir build
$ cd build
$ ../configure
$ make
|
|
There is support to configure this for each (AFI,SAFI), but
currently this configuration is only present for IPv4 unicast:
maximum-paths [ibgp] <1-255>
no maximum-paths [ibgp] [<1-255>]
* bgpd/Makefile.am
* Add bgp_mpath.h and bgp_mpath.c to build
* bgpd/bgp_mpath.h
* New file for bgp multipath declarations
* define BGP_DEFAULT_MAXPATHS
* bgpd/bgp_mpath.c
* bgp_maximum_paths_set(): Configure maximum paths for the given
afi, safi and bgp instance
* bgp_maximum_paths_unset(): Return maximum paths configuration to
the default setting for the given afi, safi and bgp instance
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgp_config_write_maxpaths(): Outputs configuration for the given
afi, safi and bgp instance
* Install command elements for IPv4 unicast
* bgpd/bgp_zebra.h
* bgp_config_write_maxpaths(): External declaration
* bgpd/bgpd.c
* bgp_create(): Initialize bgp instance to default maximum paths setting
* bgp_config_write_family(): Output maximum paths configuration
for the given address family
* bgp_config_write(): Output maximum paths configuration for
IPv4 unicast address family
* bgpd/bgpd.h
* struct bgp: Add storage for maximum paths configuration for
each afi, safi
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: add a configure flag and autoconf macro, which will
determine if your toolchain supports PIE.
* */Makefile.am: add corresponding CFLAGS and LDFLAGS into
appropriate places.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
|
|
* Makefile.am: bgpd shouldn't list libgp's sources as its own.
Use LDADD.
* bgp_aspath.h:
(struct assegment) New struct, abstract representation of a
list of AS_PATH segments and the contained ASNs.
(struct aspath) Remove the raw-data related
fields, reference the abstract struct assegment instead.
Remove several other computed fields, it's just a
headache to maintain them and they're cheap to compute from
struct assegment.
(aspath_parse) parse a stream, not a pointer to raw data.
(aspath_count_{hops,confeds,size}) helpers to access
information formerly directly contained in struct aspath.
(aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants
to be able to output hex representation of raw data.
* bgp_aspath.c: (general) partial-rewrite. Store aspath data
as an abstract singly-linked list of abstract segments,
rather than storing the raw data, and parsing it each and
every time. Remove several count/size fields which are cheap
to compute from the abstract segment structure.
(global) Include stream.h, needed for aspath_parse, and
others. Couple of helper macros added.
(struct assegment_header) Just the header, and only the
header.
(assegment_data_{new,free}) convenience functions for
AS_SEG_DATA allocation, the dynamic, per-segment array of
ASNs.
(assegment_{new,free,free_all,dup,dup_all}) convenience
functions for creating struct assegments. The _all forms will
follow the entire chain of segments from the given segment.
(assegment_prepend_asns) new function, prepend an ASN N times
to segment.
(assegment_append_asns) Append a list (array) of ASNs to
segment.
(int_cmp) convenience function for the aspath hash.
(assegment_normalise) new function. Normalise the given
segment chain to meet expectations of Quagga, and to
eliminate differing raw representations of the same paths.
Merge 'runs' of SEQUENCEs into one segment as our internal
segment is not limited by the protocol AS_PATH segment
length. Sort ASNs in SETs.
(aspath_new) Take void argument to quell warnings. Use the
assegment convenience functions.
(assegment_count_{asns,confeds,hops}) new functions to
compute at runtime values previously held in struct aspath.
(aspath_size) ditto.
(aspath_make_str_count) rewritten to stringify new
representation, and to be slightly easier to understand
hopefully.
(aspath_str_update) convenience function, update the aspath
str. Should investigate removing maintained string from
struct aspath, just run-time compute it, as per other fields.
It's just a maintenance headache, would save noticeable
amount of RAM with possibly not much extra run-time cost.
(aspath_dup) use the assegment dup functions.
(aspath_hash_alloc) Take void * argument to satisfy gcc. Use
the proper helper functions to dup data.
(assegments_parse) new function. parse raw AS_PATH data into
struct assegments. Normalise and return the head of the list.
(aspath_parse) Parse a stream, not pointer to raw data and
use assegments_parse to do it.
(assegment_data_put) Write out a single segment data in protocol
form to stream.
(assegment_header_put) ditto but for segment header.
(aspath_put) new function. As per previous but for an entire
struct aspath.
(aspath_snmp_pathseg) wrapper around aspath_put for
bgp_snmp.c. Uses a static buffer sadly.
(aspath_aggregate_as_set_add) rewritten to use assegments.
(aspath_aggregate) ditto
(aspath_{firstas,loop,private_as}_check) ditto
(aspath_{merge,prepend,add_one_as}) ditto
(aspath_cmp_left{_confed}) ditto
(aspath_delete_confed_seq) ditto, plus fixed to properly
delete all leading confed segments.
(aspath_as_add) Just use assegment_append_asns.
(aspath_segment_add) updated to use assegments.
(enum as_token) Add values for confeds
(aspath_gettoken) Add support for confeds
(aspath_str2aspath) ditto
(aspath_key_make) updated to use as_segments. Also, add
segment type into the hash value as appropriate.
(aspath_cmp) updated to use as_segments.
(aspath_print) don't segfault on NULL argument.
* bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream
now. No need for manual forwarding of stream.
(bgp_packet_attribute) empty aspath is now denoted by NULL
segment field, length is gone.
Use aspath_size() to determine size.
(bgp_attr_init) Fix declaration, explicitely specify void
arg.
(bgp_dump_routes_attr) Use aspath_size() to determine size.
* bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions.
(bgp_rib_withdraw) remove unused variable. Use
aspath_count_hops.
* bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use
aspath_snmp_pathseg to get the representation.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
|
files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname.
|
|
* configure.ac: Check for fcntl()
* {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via
regular automake means, not magic install incantations, see
bug #38.
* lib/Makefile.am: install the headers, needed to link libzebra.a
(and hence libospf.a, OSPF-API, etc.)
|
|
* Merge of zebra privileges
|
|
|
