summaryrefslogtreecommitdiff
path: root/bgpd/bgp_aspath.h
AgeCommit message (Collapse)Author
2011-07-20bgpd: Adds equal-paths check to path comparison. Paths that areJosh Bailey
equal to the best path are accumulated onto an ordered list (mp_list) if maximum-paths is configured. A future commit will add the multipath markup to the BGP rib table based on the mp_list. Add unit test for the added mp_list functions. Deterministic MED is not supported in this commit, it will be added later. * bgpd/bgp_aspath.c * Make aspath_cmp() an external symbol so it can be used in equivalent paths check * bgpd/bgp_aspath.h * Add extern declaration of aspath_cmp() * bgpd/bgp_mpath.c * bgp_info_nexthop_cmp(): Compares nexthops of two paths * bgp_info_mpath_cmp(): Compare function to order multipaths by nexthop and then by peer address * bgp_mp_list_init(): Initialize a list with the multipath order function * bgp_mp_list_clear(): Clear out the mp_list * bgp_mp_list_add(): Add a multipath to mp_list * bgpd/bgp_mpath.h * External declarations for above added functions in bgp_mpath.c * bgpd/bgp_route.c * bgp_info_cmp(): Add equivalent paths result (paths_eq). If eBGP paths are equal down to IGP metric check, flag as equal if peer AS matches. Similarly for iBGP paths but compare full AS_PATH. * bgp_best_selection(): If multipath is enabled, accumulate equivalent paths in mp_list. Add debug bgp event output to see result (will be filtered later to display only when change occurs) * bgp_process_rsclient(): Pass multipath config to bgp_best_selection() * bgp_process_main(): Pass multipath config to bgp_best_selection() * tests/bgp_mpath_test.c * Add unit test case for bgp_mp_list functions
2010-08-09bgpd: fix handling of AS path dataChris Hall
* bgpd/bgp_aspath.c * assegments_parse(): add handling of AS4_PATH input, update bounds checks, add check for AS segment type * aspath_parse(): add handling of AS4_PATH input, expect assegments_parse() to do length checking * aspath_empty(): update for the new function prototype * bgpd/bgp_aspath.h: ditto * tests/aspath_test.c: ditto * bgpd/bgp_attr.c * bgp_attr_aspath(): add handling of AS4_PATH input, update flags checks, change returned type * bgp_attr_as4_path(): discard, superseded by bgp_attr_aspath() * bgp_attr_parse(): update respectively
2009-12-17bgpd: code cleanupStephen Hemminger
* bgpd/bgp_aspath.c * ashash: only used in one file, make static * aspath_count_numas(): dead code, sayonara * bgpd/bgpd.c * peer_nsf_stop(): only used in one file, make static * bgpd/bgp_packet.h * bgp_capability_receive(): add missing prototype for a global function
2009-07-28bgpd: Implement BGP confederation error handling (RFC5065, Par. 5)Vasilis Tsiligiannis
This patch implements BGP confederation error handling in Quagga as described in RFC5065, paragraph 5. * bgp_aspath.c: (aspath_confed_check, aspath_left_confed_check) new functions * bgp_attr.c: (bgp_attr_aspath_check) apply previous and NOTIFY if there's a problem.
2008-08-22[lib] hash compare function arguments ought to be const qualifiedStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/hash.h: (struct hash) Hash comparator callback really ought to treat storage behind arguments as constant - a compare function with side-effects would be evil. * */*.c: Adjust comparator functions similarly, thus fixing at least a few compiler warnings about const qualifier being dropped. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-04-10+ [bgpd] Added new route-map set statement: "as-path ignore"Denis Ovsienko
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-04-29[bgpd] Fix warnings: hash callbacks should match hash API declarationsPaul Jakma
2007-04-22 Sebastien Tandel <sebastien@tandel.be> * bgp_advertise.c : (baa_hash_alloc, baa_hash_key, baa_hash_cmp) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API. * bgp_aspath.c,h : (aspath_key_make) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API. * bgp_attr.c,h : (cluster_hash_alloc, cluster_hash_key_make, cluster_hash_cmp, transit_hash_alloc, transit_hash_key_make, transit_hash_cmp, attrhash_key_make, attrhash_cmp, bgp_attr_hash_alloc) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API.
2006-09-14[bgpd] Add RIB reporting commands, show bgp ... statisticsPaul Jakma
2006-09-13 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_highest) new, return highest ASN in an aspath. * bgp_route.c: (bgp_peer_count_walker) new, do the walk done in bgp_peer_counts as a thread. (bgp_peer_counts) move walk to previous and call it via thread_execute so this RIB walk shows up in thread stats. (bgp_table_stats) New, gather some statistics for a given RIB. (bgp_table_stats_walker) New, RIB walker thread for former. (bgp_table_stats_vty) Parsing front-end for 'show bgp ...', useful model for future rationalisation of 'show ... bgp'. (bgp_route_init) Add new RIB stats commands.
2006-05-12[bgpd] CID #4,#5,#9,#10, simplify aspath_print_vty usagePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.{c,h}: (aspath_print_vty) take a format string, so as to reduce burden on callers, all in bgp_route.c * bgp_route.c: (route_vty_out{,tmp}) Update to match aspath_print_vty, simplifying checks needed to get spacing right. CID #4,#5. ({damp,flap}_route_vty_out) Ditto, CID #9, #10
2006-01-16[bgpd] add aspath_finish, static resource cleanup function.paul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_snmp_pathseg) move the static stream pointer out to file scope, so it can be freed. (aspath_finish) new function, free aspath resources. * bgp_aspath.h: (aspath_finish) export.
2005-09-102005-09-10 Paul Jakma <paul.jakma@sun.com>paul
* Makefile.am: bgpd shouldn't list libgp's sources as its own. Use LDADD. * bgp_aspath.h: (struct assegment) New struct, abstract representation of a list of AS_PATH segments and the contained ASNs. (struct aspath) Remove the raw-data related fields, reference the abstract struct assegment instead. Remove several other computed fields, it's just a headache to maintain them and they're cheap to compute from struct assegment. (aspath_parse) parse a stream, not a pointer to raw data. (aspath_count_{hops,confeds,size}) helpers to access information formerly directly contained in struct aspath. (aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants to be able to output hex representation of raw data. * bgp_aspath.c: (general) partial-rewrite. Store aspath data as an abstract singly-linked list of abstract segments, rather than storing the raw data, and parsing it each and every time. Remove several count/size fields which are cheap to compute from the abstract segment structure. (global) Include stream.h, needed for aspath_parse, and others. Couple of helper macros added. (struct assegment_header) Just the header, and only the header. (assegment_data_{new,free}) convenience functions for AS_SEG_DATA allocation, the dynamic, per-segment array of ASNs. (assegment_{new,free,free_all,dup,dup_all}) convenience functions for creating struct assegments. The _all forms will follow the entire chain of segments from the given segment. (assegment_prepend_asns) new function, prepend an ASN N times to segment. (assegment_append_asns) Append a list (array) of ASNs to segment. (int_cmp) convenience function for the aspath hash. (assegment_normalise) new function. Normalise the given segment chain to meet expectations of Quagga, and to eliminate differing raw representations of the same paths. Merge 'runs' of SEQUENCEs into one segment as our internal segment is not limited by the protocol AS_PATH segment length. Sort ASNs in SETs. (aspath_new) Take void argument to quell warnings. Use the assegment convenience functions. (assegment_count_{asns,confeds,hops}) new functions to compute at runtime values previously held in struct aspath. (aspath_size) ditto. (aspath_make_str_count) rewritten to stringify new representation, and to be slightly easier to understand hopefully. (aspath_str_update) convenience function, update the aspath str. Should investigate removing maintained string from struct aspath, just run-time compute it, as per other fields. It's just a maintenance headache, would save noticeable amount of RAM with possibly not much extra run-time cost. (aspath_dup) use the assegment dup functions. (aspath_hash_alloc) Take void * argument to satisfy gcc. Use the proper helper functions to dup data. (assegments_parse) new function. parse raw AS_PATH data into struct assegments. Normalise and return the head of the list. (aspath_parse) Parse a stream, not pointer to raw data and use assegments_parse to do it. (assegment_data_put) Write out a single segment data in protocol form to stream. (assegment_header_put) ditto but for segment header. (aspath_put) new function. As per previous but for an entire struct aspath. (aspath_snmp_pathseg) wrapper around aspath_put for bgp_snmp.c. Uses a static buffer sadly. (aspath_aggregate_as_set_add) rewritten to use assegments. (aspath_aggregate) ditto (aspath_{firstas,loop,private_as}_check) ditto (aspath_{merge,prepend,add_one_as}) ditto (aspath_cmp_left{_confed}) ditto (aspath_delete_confed_seq) ditto, plus fixed to properly delete all leading confed segments. (aspath_as_add) Just use assegment_append_asns. (aspath_segment_add) updated to use assegments. (enum as_token) Add values for confeds (aspath_gettoken) Add support for confeds (aspath_str2aspath) ditto (aspath_key_make) updated to use as_segments. Also, add segment type into the hash value as appropriate. (aspath_cmp) updated to use as_segments. (aspath_print) don't segfault on NULL argument. * bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream now. No need for manual forwarding of stream. (bgp_packet_attribute) empty aspath is now denoted by NULL segment field, length is gone. Use aspath_size() to determine size. (bgp_attr_init) Fix declaration, explicitely specify void arg. (bgp_dump_routes_attr) Use aspath_size() to determine size. * bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions. (bgp_rib_withdraw) remove unused variable. Use aspath_count_hops. * bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use aspath_snmp_pathseg to get the representation.
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
2005-05-232005-05-23 Paul Jakma <paul@dishone.st>paul
* bgp_fsm.h: Add extern qualifier to exported functions * bgp_nexthop.c: add static to nexthop specific globals * *.h: Add guard defines
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2004-10-132004-10-13 Paul Jakma <paul@dishone.st>paul
* (global) more const'ification and fixups of types to clean up code. * bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect, should use something like the VTY_GET_INTEGER macro, but without the vty_out bits.. * bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE (no_set_aggregator_as) ditto. * bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is returned, add comments about troublesome return value.
2002-12-13Initial revisionpaul