summaryrefslogtreecommitdiff
path: root/bgpd/bgp_attr.c
AgeCommit message (Collapse)Author
2011-07-14bgpd: more SAFI fixesDenis Ovsienko
Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-07-12bgpd: consistent log msg format (BZ#565)heasley
2011-07-05bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d. (cherry picked from commit c8f3fe3063cb9ff193b13011cfbda3e605395340) Conflicts: bgpd/bgp_attr.c (caused by c8e7b895, resolved)
2011-07-04bgpd/security: CVE-2010-1674 Fix crash due to extended-community parser errorPaul Jakma
* bgp_attr.c: (bgp_attr_ext_communities) Certain extended-community attrs can leave attr->flag indicating ext-community is present, even though no extended-community object has been attached to the attr structure. Thus a null-pointer dereference can occur later. (bgp_attr_community) No bug fixed here, but tidy up flow so it has same form as previous. Problem and fix thanks to anonymous reporter. (cherry picked from commit 0c46638122f10019a12ae9668aec91691cf2e017)
2010-10-06bgpd, lib: adopt afi_t and safi_t in several placesMichael Lambert
* bgpd/bgp_attr.c, bgpd/bgp_open.h, bgpd/bgp_route.c, lib/prefix.c, lib/prefix.h: Various integer types were being used where, if we had strict type checking, afi_t and safi_t would be required. Signed-off-by: G.Balaji <balajig81@gmail.com> (cherry picked from commit c8af35ffa2dc79ff7d7ff00b1b61f1f50a100ab6)
2010-08-09bgpd: fix handling of AS path dataChris Hall
* bgpd/bgp_aspath.c * assegments_parse(): add handling of AS4_PATH input, update bounds checks, add check for AS segment type * aspath_parse(): add handling of AS4_PATH input, expect assegments_parse() to do length checking * aspath_empty(): update for the new function prototype * bgpd/bgp_aspath.h: ditto * tests/aspath_test.c: ditto * bgpd/bgp_attr.c * bgp_attr_aspath(): add handling of AS4_PATH input, update flags checks, change returned type * bgp_attr_as4_path(): discard, superseded by bgp_attr_aspath() * bgp_attr_parse(): update respectively
2009-07-30bgpd: Workaround for invalid MBGP next hopMichael Lambert
* bgp_attr.c: (bgp_mp_reach_parse) There are some interoperability issues for MBGP (particularly IPv4 multicast NLRI) between different implementations. In order to get some next hops to install correctly in the BGP tables, it appears to be necessary to copy the multiprotocol next hop into the base next hop field. This is related to differences in RFC 2283 and RFC 2858.
2009-07-28bgpd: Implement BGP confederation error handling (RFC5065, Par. 5)Vasilis Tsiligiannis
This patch implements BGP confederation error handling in Quagga as described in RFC5065, paragraph 5. * bgp_aspath.c: (aspath_confed_check, aspath_left_confed_check) new functions * bgp_attr.c: (bgp_attr_aspath_check) apply previous and NOTIFY if there's a problem.
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-06-18[bgpd/cleanup] BGP make attribute variables localStephen Hemminger
Message lists can be read-only, and hash tables are local to this code.
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2009-04-30[bgpd] AS4 bugfix by Chris Caputo <ccaputo@alt.net>Denis Ovsienko
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was getting hit under certain 4-byte ASN conditions. New realloc strategy. * bgpd/bgp_aspath.c: (aspath_key_make) const warning fix. "%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is above 2^31.
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-08-22[lib] hash compare function arguments ought to be const qualifiedStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/hash.h: (struct hash) Hash comparator callback really ought to treat storage behind arguments as constant - a compare function with side-effects would be evil. * */*.c: Adjust comparator functions similarly, thus fixing at least a few compiler warnings about const qualifier being dropped. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-07-22[bgpd] fix a couple of trivial compiler warningsPaul Jakma
2008-07-22 Paul Jakma <paul.jakma@sun.com> * bgp_community.c: (community_str2com) assigns defaults to local vars * bgp_attr.c: (bgp_attr_parse) match format specifier to arg * bgp_table.{c,h}: (bgp_table_top) can take a * to a const, quelling warning in bgp_route.c
2008-06-07[bgpd] minor changes to bgp_mp_reach_parsePaul Jakma
2008-06-07 Paul Jakma <paul@jakma.org> * bgp_attr.{c,h}: (bgp_mp_{un,}reach_parse) export, for unit tests. * bgp_attr.c: (bgp_mp_reach_parse) Add logging. Tighten length test to bounds check against the attribute length rather than the stream length..
2008-06-01[bgpd] bug #419: partial aspath-limit incorrectly causes session resetPaul Jakma
2008-06-01 jfletche@gmail.com * bgp_attr.c: (bgp_attr_aspathlimit) fix silly bug in flags check that was causing BGP to drop sessions if it received a aspath-limit with partial set. Fixes bug #419.
2008-03-13[bgpd] remove unnecessary 0 entries from struct message'sPaul Jakma
2008-03-13 Paul Jakma <paul.jakma@sun.com> * (various) Remove 0 entries from struct message's, unneeded due to recent improvements in mes_lookup/LOOKUP.
2007-12-22[bgpd] Fix number of DoS security issues, restricted to configured peers.Paul Jakma
2007-12-22 Paul Jakma <paul.jakma@sun.com> * Fix series of vulnerabilities reported by "Mu Security Research Team", where bgpd can be made to crash by sending malformed packets - requires that bgpd be configured with a session to the peer. * bgp_attr.c: (bgp_attr_as4_path) aspath_parse may fail, only set the attribute flag indicating AS4_PATH if we actually managed to parse one. (bgp_attr_munge_as4_attrs) Assert was too general, it is possible to receive AS4_AGGREGATOR before AGGREGATOR. (bgp_attr_parse) Check that we have actually received the extra byte of header for Extended-Length attributes. * bgp_attr.h: Fix BGP_ATTR_MIN_LEN to account for the length byte. * bgp_open.c: (cap_minsizes) Fix size of CAPABILITY_CODE_RESTART, incorrect -2 left in place from a development version of as4-path patch. * bgp_packet.c: (bgp_route_refresh_receive) ORF length parameter needs to be properly sanity checked. * tests/bgp_capability_test.c: Test for empty capabilities.
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-09-07[bgpd] low-impact DoS: crash on malformed community with debug setPaul Jakma
2007-09-07 Paul Jakma <paul.jakma@sun.com> * (general) bgpd can be made crash by remote peers if debug bgp updates is set, due to NULL pointer dereference. Reported by "Mu Security Research Team", <security@musecurity.com>. * bgp_attr.c: (bgp_attr_community) If community length is 0, don't set the community-present attribute bit, just return early. * bgp_debug.c: (community_str,community_com2str) Check com pointer before dereferencing.
2007-08-30[bgpd] bug #398 Bogus free on out route-map, and assert() with rsclientsPaul Jakma
2007-08-27 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_announce_check) Fix bug #398, slight modification of Vladimir Ivanov's suggested fix - to keep memory alloc conditional. (bgp_process_announce_selected) Don't take struct attr as argument, none of the callers need it and it needlessly distances allocation from use. Free the extended attr, the attr itself is on the stack. Fix bad indentation. * bgp_attr.c: (bgp_packet_attribute) Remove incorrect assert, and adjust conditional to test attr->extra, diagnosis by Vladimir Ivanov in bug #398. 2007-08-27 Vladimir Ivanov <wawa@yandex-team.ru> * bgp_route.c: (bgp_announce_check_rsclient) copy of ri->attr is no longer deep enough, due to addition of attr->extra. It should use bgp_attr_dup, as bgp_announce_check() does.
2007-08-06[bgpd] Add support for AS_PATHLIMIT / draft-ietf-idr-as-pathlimitPaul Jakma
2007-07-31 Paul Jakma <paul.jakma@sun.com> * (general) Support for draft-ietf-idr-as-pathlimit-03. * bgp_attr.h: (struct attr) Add pathlimit struct bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. (attrhash_key_make) tally pathlimit too (attrhash_cmp) cmp pathlimit attr (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. (bgp_attr_parse) ditto (bgp_packet_attribute) Write out AS_PATHLIMIT when set (bgp_dump_routes_attr) ditto * bgp_route.h: (struct bgp_static) Add TTL field * bgp_route.c: (bgp_announce_check) Drop paths that are over their hop-count TTL before sending via EBGP. Mangle ASN in pathlimit for confeds/private as best we can. (bgp_static_update_{rsclient,main}) Add any configure pathlimit information. (bgp_pathlimit_update_parents) New, update atomic-aggr setting for parents of an aspathlimit'ed static. (bgp_static_set) Add TTL argument, for all the 'bgp network' commands. Call previous for TTL changed statics. (bgp_static_unset) Call pathlimit_update_parents. (various bgp network commands) Add 'pathlimit <0-255>' qualifier to all the various forms, bar route-map - which can set ttl itself. * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and 'match pathlimit as'. * doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
2007-05-04[bgpd] Trim memory usage of BGP routesPaul Jakma
2007-05-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: (struct info) Move less frequently used fields to a lazily allocated struct info_extra. Export bgp_info_extra_get * bgp_route.c: (bgp_info_extra_new) allocate extra (bgp_info_extra_free) Free damp info and the info_extra. (bgp_info_extra_get) Retrieve the info_extra of a struct info, allocating as required. (generally) adjust to use info->extra * bgp_damp.c: (generally) use bgp_info_extra_get to access dampinfo * bgp_attr.h: Move rarely allocated attributes from struct attr to a struct attr_extra, for a substantial saving in size of struct attr. * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. (bgp_attr_extra_get) Get the attr_extra for a given struct attr, allocating it if needs be. (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. (generally) adjust to know about attr->extra. * bgp_debug.c: (bgp_dump_attr) ditto * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. * bgp_nexthop.c: (generally) adjust to know about attr->extra and info->extra. * bgp_{packet,routemap,snmp,zebra}.c: ditto * lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
2007-04-29[bgpd] Use defines for default weightPaul Jakma
2007-04-22 Sebastien Tandel <sebastien@tandel.be> * bgp_attr.h : Definition of BGP_ATTR_DEFAULT_WEIGHT. * bgp_attr.c : (bgp_attr_default_intern) now uses bgp_attr_default_set instead of duplicating the same code. (general) Use of BGP_ATTR_DEFAULT_WEIGHT. Replace two 16 by IPV6_MAX_BYTELEN.
2007-04-29[bgpd] Fix warnings: hash callbacks should match hash API declarationsPaul Jakma
2007-04-22 Sebastien Tandel <sebastien@tandel.be> * bgp_advertise.c : (baa_hash_alloc, baa_hash_key, baa_hash_cmp) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API. * bgp_aspath.c,h : (aspath_key_make) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API. * bgp_attr.c,h : (cluster_hash_alloc, cluster_hash_key_make, cluster_hash_cmp, transit_hash_alloc, transit_hash_key_make, transit_hash_cmp, attrhash_key_make, attrhash_cmp, bgp_attr_hash_alloc) conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with void * arguments as defined by the API.
2007-04-10[bgpd] Bug #354: Take care to keep reads of MP_(UN)REACH_NLRI in boundsPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * bgp_attr.c: (general) Bug #354: parsing of MP_REACH_NLRI and MP_UNREACH_NLRI does not take sufficient care to ensure reads from stream buffer stay in-bounds. Hence bgpd may attempt to read beyond end of stream, if given a crafted packet. As it uses the stream access methods to do so, this will typically result in assert() being hit in stream.c. Where code is compiled without assert() enabled, result is unknown. (struct message attr_str) should be static. (bgp_mp_reach_parse) Carefully check length remaining in stream against amount desired to read from stream, prior to each read, particularly where lengths are conditional on data obtained from stream - using STREAM_READABLE. Remove code to parse SNPA-number, it's a defunct field and changed to a fixed size in latest BGP MP update RFC - log warning if SNPA-number is not 0. (bgp_mp_unreach_parse) Check withdraw_length carefully against STREAM_READABLE. (bgp_attr_parse) If attribute-parser function returns error, log warning. Log attribute type on mismatch.
2006-05-12[bgpd] Remove dead code in ORIGINATOR_ID packet forming codePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_attr.c: (bgp_packet_attribute) Remove dead code, Coverity CID #1
2006-05-04[bgpd] bug #210: Enable crucial VPNv4 code which was disabledPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * (general) VPNv4 fixes. Certain VPNv4 code was not enabled. See bug #210. * bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be u_char really. * bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some VPNv4 code which inexplicably was ifdef'd out. comments from a tester on IRC suggest this fixes bug #210.
2006-03-30[bgpd] rearrange some structs for less padding, stats for table/attrs.Paul Jakma
2006-03-12 Paul Jakma <paul.jakma@sun.com> * bgp_attr.h: (struct attr) rearrange fields to avoid wasted padding between them as much as possible. (attr_count,attr_unknown_count) export new functions to return number of counts of cached attributes. * bgp_attr.c: (attr_count,attr_unknown_count) new functions to return number of counts of cached attributes. * bgp_route.h: (struct bgp_info) rearrange fields to avoid wasted padding. * bgp_table.h: (struct bgp_table) Add a count field, of number of nodes in the table. (struct bgp_node) rearrange fields to avoid wasted padding between them, though I don't think there was any in this case. * bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count. (bgp_table_count) new function to access the table count.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2005-09-102005-09-10 Paul Jakma <paul.jakma@sun.com>paul
* Makefile.am: bgpd shouldn't list libgp's sources as its own. Use LDADD. * bgp_aspath.h: (struct assegment) New struct, abstract representation of a list of AS_PATH segments and the contained ASNs. (struct aspath) Remove the raw-data related fields, reference the abstract struct assegment instead. Remove several other computed fields, it's just a headache to maintain them and they're cheap to compute from struct assegment. (aspath_parse) parse a stream, not a pointer to raw data. (aspath_count_{hops,confeds,size}) helpers to access information formerly directly contained in struct aspath. (aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants to be able to output hex representation of raw data. * bgp_aspath.c: (general) partial-rewrite. Store aspath data as an abstract singly-linked list of abstract segments, rather than storing the raw data, and parsing it each and every time. Remove several count/size fields which are cheap to compute from the abstract segment structure. (global) Include stream.h, needed for aspath_parse, and others. Couple of helper macros added. (struct assegment_header) Just the header, and only the header. (assegment_data_{new,free}) convenience functions for AS_SEG_DATA allocation, the dynamic, per-segment array of ASNs. (assegment_{new,free,free_all,dup,dup_all}) convenience functions for creating struct assegments. The _all forms will follow the entire chain of segments from the given segment. (assegment_prepend_asns) new function, prepend an ASN N times to segment. (assegment_append_asns) Append a list (array) of ASNs to segment. (int_cmp) convenience function for the aspath hash. (assegment_normalise) new function. Normalise the given segment chain to meet expectations of Quagga, and to eliminate differing raw representations of the same paths. Merge 'runs' of SEQUENCEs into one segment as our internal segment is not limited by the protocol AS_PATH segment length. Sort ASNs in SETs. (aspath_new) Take void argument to quell warnings. Use the assegment convenience functions. (assegment_count_{asns,confeds,hops}) new functions to compute at runtime values previously held in struct aspath. (aspath_size) ditto. (aspath_make_str_count) rewritten to stringify new representation, and to be slightly easier to understand hopefully. (aspath_str_update) convenience function, update the aspath str. Should investigate removing maintained string from struct aspath, just run-time compute it, as per other fields. It's just a maintenance headache, would save noticeable amount of RAM with possibly not much extra run-time cost. (aspath_dup) use the assegment dup functions. (aspath_hash_alloc) Take void * argument to satisfy gcc. Use the proper helper functions to dup data. (assegments_parse) new function. parse raw AS_PATH data into struct assegments. Normalise and return the head of the list. (aspath_parse) Parse a stream, not pointer to raw data and use assegments_parse to do it. (assegment_data_put) Write out a single segment data in protocol form to stream. (assegment_header_put) ditto but for segment header. (aspath_put) new function. As per previous but for an entire struct aspath. (aspath_snmp_pathseg) wrapper around aspath_put for bgp_snmp.c. Uses a static buffer sadly. (aspath_aggregate_as_set_add) rewritten to use assegments. (aspath_aggregate) ditto (aspath_{firstas,loop,private_as}_check) ditto (aspath_{merge,prepend,add_one_as}) ditto (aspath_cmp_left{_confed}) ditto (aspath_delete_confed_seq) ditto, plus fixed to properly delete all leading confed segments. (aspath_as_add) Just use assegment_append_asns. (aspath_segment_add) updated to use assegments. (enum as_token) Add values for confeds (aspath_gettoken) Add support for confeds (aspath_str2aspath) ditto (aspath_key_make) updated to use as_segments. Also, add segment type into the hash value as appropriate. (aspath_cmp) updated to use as_segments. (aspath_print) don't segfault on NULL argument. * bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream now. No need for manual forwarding of stream. (bgp_packet_attribute) empty aspath is now denoted by NULL segment field, length is gone. Use aspath_size() to determine size. (bgp_attr_init) Fix declaration, explicitely specify void arg. (bgp_dump_routes_attr) Use aspath_size() to determine size. * bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions. (bgp_rib_withdraw) remove unused variable. Use aspath_count_hops. * bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use aspath_snmp_pathseg to get the representation.
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-01 * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for oldhasso
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor version" command as deprecated. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2004-12-09Add comments with warnings obtained on NetBSD/i386. Both are due togdt
size_t being used for streams. Perhaps cast to unsigned long before printf? Surely that's big enough even if size_t could be larger in theory. (no changelog, since only comment changes)
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
2004-09-132004-09-13 Jose Luis Rubio <jrubio@dit.upm.es>paul
(at Technical University of Madrid as part of Euro6ix Project) Enhanced Route Server functionality and Route-Maps: * bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to support rs-clients. A 'struct bgp_table *rib' has been added to the first (to mantain a separated RIB for each rs-client) and two new route-maps have been added to the last (for import/export policies). Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX}, PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT. * bgpd/bgpd.c: Modified the functions that create/delete/etc peers in order to consider the new fields included in 'struct peer' for supporting rs-clients, i.e. the import/export route-maps and the 'struct bgp_table'. * bgpd/bgp_route.{ch}: Modified several functions related with receiving/sending announces in order to support the new Route Server capabilities. Function 'bgp_process' has been reorganized, creating an auxiliar function for best path selection ('bgp_best_selection'). Modified 'bgp_show' and 'bgp_show_route' for displaying information about any RIB (and not only the main bgp RIB). Added commands for displaying information about RS-clients RIBs: 'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M', etc * bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT}) and 'void *owner' which points to 'struct bgp' or 'struct peer' which owns the table. When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set. * bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and 'no neighbor ... route-server-client' now not only set/unset the flag PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct bgp_table' of the peer. Special actions are taken for peer_groups. Command 'neighbor ... route-map WORD (in|out)' now also supports two new kinds of route-map: 'import' and 'export'. Added commands 'clear bgp * rsclient', etc. These commands allow a new kind of soft_reconfig which affects only the RIB of the specified RS-client. Added commands 'show bgp rsclient summary', etc which display a summary of the rs-clients configured for the corresponding address family. * bgpd/bgp_routemap.c: A new match statement is available, 'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in import/export route-maps, and it matches when the peer who announces (when used in an import route-map) or is going to receive (when used in an export route-map) the route is the same than the one specified in the statement. For peer-groups the statement matches if the specified peer is member of the peer-group. A special version of the command, 'match peer local', matches with routes originated by the Route Server (defined with 'network ...', redistributed routes and default-originate). * lib/routemap.{ch}: Added a new clause 'call NAME' for use in route-maps. It jumps into the specified route-map and when it returns the first route-map ends if the called RM returns DENY_MATCH, or continues in other case.
2004-06-042004-06-04 Paul Jakma <paul@dishone.st>paul
* type mismatch fixes
2004-05-20Merge bgpd changeset 1184 from Zebra repository by Rivo Nurges.hasso
2003-10-182003-10-18 Lorenzo Colitti <lorenzo@ripe.net>paul
2003-10-18 Lorenzo Colitti <lorenzo@ripe.net> * bgpd/bgp_attr.c: (bgp_dump_routes_attr) Dont dump IPv4 nexthop for IP. Dump MP_NLRI attr with IPv6 next-hop for AF_INET6 address family prefixes. Accept prefix as argument. * bgpd/bgp_attr.c: modify bgp_dump_routes_attr declaration. * bgpd/bgp_dump.c: (bgp_dump_routes_entry) Modify calls to bgp_dump_routes_attr. (bgp_dump_common) Go by the family of the peering socket, not configured address family when dumping peering information. Add HAVE_IPV6 conditionals, eg missing from previous bgp interval patch.
2002-12-13Initial revisionpaul