| Age | Commit message (Collapse) | Author |
|---|
|
* Makefile.am: bgpd shouldn't list libgp's sources as its own.
Use LDADD.
* bgp_aspath.h:
(struct assegment) New struct, abstract representation of a
list of AS_PATH segments and the contained ASNs.
(struct aspath) Remove the raw-data related
fields, reference the abstract struct assegment instead.
Remove several other computed fields, it's just a
headache to maintain them and they're cheap to compute from
struct assegment.
(aspath_parse) parse a stream, not a pointer to raw data.
(aspath_count_{hops,confeds,size}) helpers to access
information formerly directly contained in struct aspath.
(aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants
to be able to output hex representation of raw data.
* bgp_aspath.c: (general) partial-rewrite. Store aspath data
as an abstract singly-linked list of abstract segments,
rather than storing the raw data, and parsing it each and
every time. Remove several count/size fields which are cheap
to compute from the abstract segment structure.
(global) Include stream.h, needed for aspath_parse, and
others. Couple of helper macros added.
(struct assegment_header) Just the header, and only the
header.
(assegment_data_{new,free}) convenience functions for
AS_SEG_DATA allocation, the dynamic, per-segment array of
ASNs.
(assegment_{new,free,free_all,dup,dup_all}) convenience
functions for creating struct assegments. The _all forms will
follow the entire chain of segments from the given segment.
(assegment_prepend_asns) new function, prepend an ASN N times
to segment.
(assegment_append_asns) Append a list (array) of ASNs to
segment.
(int_cmp) convenience function for the aspath hash.
(assegment_normalise) new function. Normalise the given
segment chain to meet expectations of Quagga, and to
eliminate differing raw representations of the same paths.
Merge 'runs' of SEQUENCEs into one segment as our internal
segment is not limited by the protocol AS_PATH segment
length. Sort ASNs in SETs.
(aspath_new) Take void argument to quell warnings. Use the
assegment convenience functions.
(assegment_count_{asns,confeds,hops}) new functions to
compute at runtime values previously held in struct aspath.
(aspath_size) ditto.
(aspath_make_str_count) rewritten to stringify new
representation, and to be slightly easier to understand
hopefully.
(aspath_str_update) convenience function, update the aspath
str. Should investigate removing maintained string from
struct aspath, just run-time compute it, as per other fields.
It's just a maintenance headache, would save noticeable
amount of RAM with possibly not much extra run-time cost.
(aspath_dup) use the assegment dup functions.
(aspath_hash_alloc) Take void * argument to satisfy gcc. Use
the proper helper functions to dup data.
(assegments_parse) new function. parse raw AS_PATH data into
struct assegments. Normalise and return the head of the list.
(aspath_parse) Parse a stream, not pointer to raw data and
use assegments_parse to do it.
(assegment_data_put) Write out a single segment data in protocol
form to stream.
(assegment_header_put) ditto but for segment header.
(aspath_put) new function. As per previous but for an entire
struct aspath.
(aspath_snmp_pathseg) wrapper around aspath_put for
bgp_snmp.c. Uses a static buffer sadly.
(aspath_aggregate_as_set_add) rewritten to use assegments.
(aspath_aggregate) ditto
(aspath_{firstas,loop,private_as}_check) ditto
(aspath_{merge,prepend,add_one_as}) ditto
(aspath_cmp_left{_confed}) ditto
(aspath_delete_confed_seq) ditto, plus fixed to properly
delete all leading confed segments.
(aspath_as_add) Just use assegment_append_asns.
(aspath_segment_add) updated to use assegments.
(enum as_token) Add values for confeds
(aspath_gettoken) Add support for confeds
(aspath_str2aspath) ditto
(aspath_key_make) updated to use as_segments. Also, add
segment type into the hash value as appropriate.
(aspath_cmp) updated to use as_segments.
(aspath_print) don't segfault on NULL argument.
* bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream
now. No need for manual forwarding of stream.
(bgp_packet_attribute) empty aspath is now denoted by NULL
segment field, length is gone.
Use aspath_size() to determine size.
(bgp_attr_init) Fix declaration, explicitely specify void
arg.
(bgp_dump_routes_attr) Use aspath_size() to determine size.
* bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions.
(bgp_rib_withdraw) remove unused variable. Use
aspath_count_hops.
* bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use
aspath_snmp_pathseg to get the representation.
|
|
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor
version" command as deprecated.
[merge from GNU Zebra]
|
|
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
|
|
size_t being used for streams. Perhaps cast to unsigned long before
printf? Surely that's big enough even if size_t could be larger in
theory.
(no changelog, since only comment changes)
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
|
|
(at Technical University of Madrid as part of Euro6ix Project)
Enhanced Route Server functionality and Route-Maps:
* bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to
support rs-clients. A 'struct bgp_table *rib' has been added to the
first (to mantain a separated RIB for each rs-client) and two new
route-maps have been added to the last (for import/export policies).
Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX},
PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT.
* bgpd/bgpd.c: Modified the functions that create/delete/etc peers in
order to consider the new fields included in 'struct peer' for
supporting rs-clients, i.e. the import/export route-maps and the
'struct bgp_table'.
* bgpd/bgp_route.{ch}: Modified several functions related with
receiving/sending announces in order to support the new Route Server
capabilities.
Function 'bgp_process' has been reorganized, creating an auxiliar
function for best path selection ('bgp_best_selection').
Modified 'bgp_show' and 'bgp_show_route' for displaying information
about any RIB (and not only the main bgp RIB).
Added commands for displaying information about RS-clients RIBs:
'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient
(A.B.C.D|X:X::X:X) X:X::X:X/M', etc
* bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two
new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT})
and 'void *owner' which points to 'struct bgp' or 'struct peer' which
owns the table.
When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set.
* bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and
'no neighbor ... route-server-client' now not only set/unset the flag
PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct
bgp_table' of the peer. Special actions are taken for peer_groups.
Command 'neighbor ... route-map WORD (in|out)' now also supports two
new kinds of route-map: 'import' and 'export'.
Added commands 'clear bgp * rsclient', etc. These commands allow a new
kind of soft_reconfig which affects only the RIB of the specified
RS-client.
Added commands 'show bgp rsclient summary', etc which display a
summary of the rs-clients configured for the corresponding address
family.
* bgpd/bgp_routemap.c: A new match statement is available,
'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in
import/export route-maps, and it matches when the peer who announces
(when used in an import route-map) or is going to receive (when used
in an export route-map) the route is the same than the one specified
in the statement.
For peer-groups the statement matches if the specified peer is member
of the peer-group.
A special version of the command, 'match peer local', matches with
routes originated by the Route Server (defined with 'network ...',
redistributed routes and default-originate).
* lib/routemap.{ch}: Added a new clause 'call NAME' for use in
route-maps. It jumps into the specified route-map and when it returns
the first route-map ends if the called RM returns DENY_MATCH, or
continues in other case.
|
|
* type mismatch fixes
|
|
|
|
2003-10-18 Lorenzo Colitti <lorenzo@ripe.net>
* bgpd/bgp_attr.c: (bgp_dump_routes_attr) Dont dump IPv4 nexthop
for IP. Dump MP_NLRI attr with IPv6 next-hop for AF_INET6 address
family prefixes. Accept prefix as argument.
* bgpd/bgp_attr.c: modify bgp_dump_routes_attr declaration.
* bgpd/bgp_dump.c: (bgp_dump_routes_entry) Modify calls to
bgp_dump_routes_attr.
(bgp_dump_common) Go by the family of the peering socket, not
configured address family when dumping peering information.
Add HAVE_IPV6 conditionals, eg missing from previous bgp interval
patch.
|
|
|
