summaryrefslogtreecommitdiff
path: root/bgpd/bgp_packet.c
AgeCommit message (Collapse)Author
2013-01-14bgpd: fix error response to invalid BGP version numberLeonid Rosenboim
BGP4-ANVL 20.1 ANVL tries to open BGP with version 5 and expects correct notification in response. Quagga sends notification, but with incorrect information in it. The data needs to be a 2-byte value, and for now we respond with 0004 for any peer version other than 4. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-06-21bgpd: Fix for commit 6a4677b7, fixes BZ#729Jorge Boncompte [DTI2]
The timers are rearmed after events processing. After 6a4677b7 we do not generate events that can rearm the holdtime timer. Fix it's to call bgp_timer_set() directly as it's done from bgp_event(). Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Tested-by: Martin Winter <mwinter@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize holdtime timer cancellingJorge Boncompte [DTI2]
* bgp_packet.c: (bgp_update_receive) for every update received we queue an event just to cancel the holdtime timer, done in bgp_fsm_update(). Instead cancel the timer directly an avoid a scheduling pass. This incidently fixes another problem found on a slow box, where thousands of events threads were queued, and run, but never freed, because they are moved to the unused list that grows without bounds. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: use on stack struct attr_extra in bgp_update_receive()Jorge Boncompte [DTI2]
Reduce memory heap fragmentation and pressure on the memory allocator. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: debug buffers cleanup and optimizationJorge Boncompte [DTI2]
Just the first change pushes bgp_update_receive() from 6th to ~14th on a full internet table load profiling session. * bgp_debug.c: (bgp_update_receive) The attrstr initialization is expensive, moved under the debug conditional where it is used and just initialize the first char to NULL. (bgp_update_default_send) Initialize attrstr needed for bgp_dump_attr(). Moved some buffers used for printing IP[4|6] addresses under the debug conditionals that use them and reduced its size. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-04-08bgpd: fix issue in capability negotiation (BZ#700)Avneesh Sachdev
Address problem where bgpd would reject a session if a peer sent some capabilities in its Open message, but did not include a Multiprotocol extensions capability. Note that the session would come up if there were no capabilities at all in the Open message. * Add the 'mp_capability' out parameter to bgp_capability_parse(). Set it to '1' if a Multiprotocol extensions capability is encountered. * Switch on 'mp_capability' instead of 'capability' in the calling functions to determine if the peer indicated the set of AFI/SAFIs it supports. The net result is that when a peer does not send an MP capability, it is assumed to support the AFI/SAFIs configured for it locally.
2012-03-04bgpd: Open option parse errors don't NOTIFY, resulting in abort & DoSPaul Jakma
* bgp_packet.c: (bgp_open_receive) Errors from bgp_open_option_parse are detected, and the code will stop processing the OPEN and return. However it does so without calling bgp_notify_send to send a NOTIFY - which means the peer FSM doesn't get stopped, and bgp_read will be called again later. Because it returns, it doesn't go through the code near the end of the function that removes the current message from the peer input streaam. Thus the next call to bgp_read will try to parse a half-parsed stream as if it were a new BGP message, leading to an assert later in the code when it tries to read stuff that isn't there. Add the required call to bgp_notify_send before returning. * bgp_open.c: (bgp_capability_as4) Be a bit stricter, check the length field corresponds to the only value it can be, which is the amount we're going to read off the stream. And make sure the capability flag gets set, so callers can know this capability was read, regardless. (peek_for_as4_capability) Let bgp_capability_as4 do the length check.
2012-01-02bgpd: justify checks for IPv4 class D/EDenis Ovsienko
* lib/prefix.h * IPV4_CLASS_DE(): make consistent with counterpart macros * bgp_packet.c * bgp_open_receive(): test using macro instead of ">=" * bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem
2011-12-13bgpd: fix regression in ORF procesing (BZ#688)Denis Ovsienko
This issue has been pointed out by Lou Berger and Tim Browski. * bgp_packet.c * bgp_route_refresh_receive(): restore if() condition, which was broken by commit fdbc8e77c88f751924299d0bc752371d5cc31116
2011-09-29bgpd: more SAFI fixesDenis Ovsienko
(with resolved conflict in bgpd/bgp_packet.c) Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-09-27bgpd: spellingDenis Ovsienko
2011-09-27bgpd: add useful notification logs (BZ#616)heasley
* bgp_packet.c * bgp_notify_send_with_data(): add calls to zlog_info()
2011-07-29Merge branch 'attr-errors'Paul Jakma
Contains BGP fixes: - set extcommunity crash: tihs patch tries to make the refcounting more robust but does not fully solve the problem, sadly. - BGP attribute error handling: Little testing.
2011-04-13bgpd: trivial format / warning fixesPaul Jakma
* bgp_aspath.c: (assegments_parse) just bail early if length doesn't match and fix the formatting. * bgp_network.c: add include needed for set_nonblocking * bgp_packet.c: formatting
2011-03-21bgpd: enable TCP corkingStephen Hemminger
* bgp_packet.c: (bgp_write) On BGP write, use TCP_CORK to provide hints to kernel about TCP buffering. This will cause BGP packets to occur in bigger chunks (full size MTU), improving performance and getting rid of one of the problems reported in the UNH BGP conformance test.
2011-03-21bgpd: leave peer socket in non-blocking mode (mostly)Stephen Hemminger
* bgpd: Rather than toggling socket in/out of non-block mode, just leave it in nonblocking mode. One exception is in bgp_notify which only happens just before close.
2011-03-21bgpd: Implement revised error handling for partial optional/trans. attributesPaul Jakma
* BGP error handling generally boils down to "reset session". This was fine when all BGP speakers pretty much understood all BGP messages. However the increasing deployment of new attribute types has shown this approach to cause problems, in particular where a new attribute type is "tunneled" over some speakers which do not understand it, and then arrives at a speaker which does but considers it malformed (e.g. corruption along the way, or because of early implementation bugs/interop issues). To mitigate this drafts before the IDR (likely to be adopted) propose to treat errors in partial (i.e. not understood by neighbour), optional transitive attributes, when received from eBGP peers, as withdrawing only the NLRIs in the affected UPDATE, rather than causing the entire session to be reset. See: http://tools.ietf.org/html/draft-scudder-idr-optional-transitive * bgp_aspath.c: (assegments_parse) Replace the "NULL means valid, 0-length OR an error" return value with an error code - instead taking pointer to result structure as arg. (aspath_parse) adjust to suit previous change, but here NULL really does mean error in the external interface. * bgp_attr.h (bgp_attr_parse) use an explictly typed and enumerated value to indicate return result. (bgp_attr_unintern_sub) cleans up just the members of an attr, but not the attr itself, for benefit of those who use a stack-local attr. * bgp_attr.c: (bgp_attr_unintern_sub) split out from bgp_attr_unintern (bgp_attr_unintern) as previous. (bgp_attr_malformed) helper function to centralise decisions on how to handle errors in attributes. (bgp_attr_{aspathlimit,origin,etc..}) Use bgp_attr_malformed. (bgp_attr_aspathlimit) Subcode for error specifc to this attr should be BGP_NOTIFY_UPDATE_OPT_ATTR_ERR. (bgp_attr_as4_path) be more rigorous about checks, ala bgp_attr_as_path. (bgp_attr_parse) Adjust to deal with the additional error level that bgp_attr_ parsers can raise, and also similarly return appropriate error back up to (bgp_update_receive). Try to avoid leaking as4_path. * bgp_packet.c: (bgp_update_receive) Adjust to deal with BGP_ATTR_PARSE_WITHDRAW error level from bgp_attr_parse, which should lead to a withdraw, by making the attribute parameter in call to (bgp_nlri_parse) conditional on the error, so the update case morphs also into a withdraw. Use bgp_attr_unintern_sub from above, instead of doing this itself. Fix error case returns which were not calling bgp_attr_unintern_sub and probably leaking memory. * tests/aspath_test.c: Fix to work for null return with bad segments
2011-03-21bgpd: Try fix extcommunity resource allocation probs, particularly with 'set ↵Paul Jakma
extcom..' * Extended communities has some kind of resource allocation problem which causes a double-free if the 'set extcommunity ...' command is used. Try fix by properly interning extcommunities. Also, more generally, make unintern functions take a double pointer so they can NULL out callers references - a usefully defensive programming pattern for functions which make refs invalid. Sadly, this patch doesn't fix the problem entirely - crashes still occur on session clear. * bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer args. * bgp_community.h: (community_unintern) ditto * bgp_attr.h: (bgp_attr_intern) ditto * bgp_aspath.h: (bgp_aspath.h) ditto * (general) update all callers of above * bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added to the attr, and unintern any old one. (route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used for the route-map set. (route_set_ecommunity_*_free) unintern to match, instead of free (route_set_ecommunity_soo) Do as _rt does and don't just leak any pre-existing community, add to it (is additive right though?)
2011-01-14bgpd: fix handling of "Unsupported Capability"Dmitrij Tejblum
* bgp_packet.c: (bgp_notify_receive) justify the difference between BGP_NOTIFY_OPEN_UNSUP_PARAM and BGP_NOTIFY_OPEN_UNSUP_CAPBL cases, as it is explained in RFC5492, page 3, paragraph 1. "Unsupported Capability" error does not mean, that the peer doesn't support capabilities advertisement -- quite the opposite (if the peer would not support capabilities advertisement, the code would be "Unsupported Optional Parameter"). Thus there is no reason to mark the peer as one non-supporting capabilities advertisement. Example: suppose the peer is in fact IPv6-only, but we didn't configure anything address-family specific for it. Then, the peer would refuse the session with "Unsupported Capability" code. If we internally set the peer as non-supporting capabilities advertisement after that, we will not be able to establish the session with it ever, even with a fixed configuration -- IPv6-only BGP session cannot be established without capabilities. In practice an edge case would be seen as the same IPv6 peer working with its "neighbor" block read from bgpd.conf, but not working, when slowly input in "conf t" mode.
2010-09-17Set from even if binfo->extra is NULL.Greg Troxel
bgpd/bgp_packet.c:bgp_update_packet(): When extracting the peer, don't fail to extract it because "binfo->extra" is NULL. While one should certainly avoid dereferencing binfo->extra, that's not a good reason not to use binfo->peer. Fixes https://bugzilla.quagga.net/show_bug.cgi?id=497. Patch by Eric Sobocinksi.
2010-05-14bgpd: tighten bounds checking in RR ORF msg readerChris Hall
* bgp_packet.c: (bgp_route_refresh_receive) add validation of "Length" (RFC5292) field value, check input stream bounds each time bytes are pulled from it
2010-01-15bgp: use monotonic clock for time of dayStephen Hemminger
BGP uses time() to get system time of day; but that value fluctuates with time adjustments from NTP. This can cause premature flapping of peer sessions and other failures. Use the system monotonic clock supported by Quagga thread library to avoid issue. See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467 * bgpd/bgp_fsm.c * bgp_uptime_reset(): dismiss function * bgpd/bgpd.c * bgp_clock(): new function * bgpd/bgp_damp.c * bgp_reuse_timer(): employ bgp_clock() instead of time(NULL) * bgp_damp_withdraw(): idem * bgp_damp_update(): idem * bgp_damp_scan(): idem * bgp_damp_info_vty(): idem * bgp_damp_reuse_time_vty(): idem * bgpd/bgp_fsm.c * bgp_routeadv_timer(): idem * bgp_stop(): idem * bgp_establish(): idem * bgpd/bgp_packet.c * bgp_update_receive(): idem * bgpd/bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem * bgp_static_update_rsclient(): idem * bgp_static_update_main(): idem * bgp_static_update_vpnv4(): idem * bgp_aggregate_route(): idem * bgp_aggregate_add(): idem * bgp_redistribute_add(): idem * bgpd/bgp_snmp.c * bgpPeerTable(): idem * bgpTrapEstablished(): idem * bgpTrapBackwardTransition(): idem * bgpd/bgpd.c * peer_create(): idem * peer_uptime(): idem * bgp_master_init(): idem
2009-12-10bgpd: compile warnings cleanupStephen Hemminger
* bgpd/bgp_fsm.c * bgp_clearing_completed(): only used in one file, can be static * bgpd/bgp_packet.c * afi2str(): sayonara * safi2str(): sayonara * bgpd/bgp_route.c * bgp_distance_reset(): sayonara * bgpd/bgp_zebra.c * bgp_ifindex_by_nexthop(): sayonara
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-06-18[bgpd] add comment that bgp_capability_receive is exported for unit-testsPaul Jakma
2009-04-30[bgpd] AS4 bugfix by Chris Caputo <ccaputo@alt.net>Denis Ovsienko
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was getting hit under certain 4-byte ASN conditions. New realloc strategy. * bgpd/bgp_aspath.c: (aspath_key_make) const warning fix. "%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is above 2^31.
2008-09-09[bgpd] Allow accepted peers to progress even if realpeer is in ConnectPaul Jakma
* bgpd/bgp_packet.c: (bgp_open_receive) Try fix the little race in the FSM, where a accept-peer that progress faster than realpeer gets closed down if realpeer is still just in Connect, by allowing the realpeer to be bgp_stop'ed and doing the regular swapping-of-FSM state.
2008-09-06[bgpd] Document the FSM dummy-peer race that sometimes afflicts session setupPaul Jakma
* bgp_packet.c: (bgp_open_receive) the accept-peer hack can sometimes cause a race between two peers that try to establish sessions to each other, causing session setup to fail when it should have succeeded. In the worst case, the race can 'loop', causing prolonged failure to establish sessions.
2008-07-22[bgpd] Fix triggerable crash when compiled with --disable-bgp-announcePaul Jakma
2008-07-22 Paul Jakma <paul.jakma@sun.com> * HACKING: Document preference for compiler conditional code, over cpp conditional. * configure.ac: DISABLE_BGP_ANNOUNCE always should be defined. * bgp_{packet,route,advertise}.c: change to compiler testing of DISABLE_BGP_ANNOUNCE, rather than cpp. 2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable if a bgpd was compiled with --disable-bgp-announce and if GR is advertised by peer.
2008-07-21[bgpd] TCP-MD5: password vty configuration and initial Linux supportPaul Jakma
2008-07-21 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call * bgp_vty.c: (bgp_vty_return) add return code * bgpd.c: (bgp_master_init) setup the socket list. * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which was implemented by Michael, until such time as its clear its required for Linux (see sockopt comments). IPv6 support, including IPv4 sessions on AF_INET6 sockets, therefore is broken, and the '-l 0.0.0.0' arguments would need to be given to bgpd to make things work here. 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Tomohiko Kusuda <kusuda@inetcore.com> Leigh Brown <leigh@solinno.co.uk> * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 sockopt and bgpd. (bgp_md5_set_socket) Helper for bgp_connect (bgp_md5_set) setup TCP-MD5SIG for the given peer. (bgp_connect) call out to bgp_md5_set_socket for the outgoing connect socket. (bgp_socket) save references to the listen sockets, needed if TCP-MD5SIG is applied later or changed. * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' commands. * bgpd.c: (peer_{new,delete) manage TCP-MD5 password (peer_group2peer_config_copy) inherit TCP-MD5 password (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 passwords: applying checks, stopping peers, and trying to return errors to UI, etc. (bgp_config_write_peer) save password. Fix missing newline in writeout of neighbor ... port. 2008-07-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: ifdef out various places that converted v4mapped sockets to pure v4. Doesn't seem necessary at all, presumably a workaround for now historical inet_ntop bugs (?) 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> * sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
2007-12-22[bgpd] Fix number of DoS security issues, restricted to configured peers.Paul Jakma
2007-12-22 Paul Jakma <paul.jakma@sun.com> * Fix series of vulnerabilities reported by "Mu Security Research Team", where bgpd can be made to crash by sending malformed packets - requires that bgpd be configured with a session to the peer. * bgp_attr.c: (bgp_attr_as4_path) aspath_parse may fail, only set the attribute flag indicating AS4_PATH if we actually managed to parse one. (bgp_attr_munge_as4_attrs) Assert was too general, it is possible to receive AS4_AGGREGATOR before AGGREGATOR. (bgp_attr_parse) Check that we have actually received the extra byte of header for Extended-Length attributes. * bgp_attr.h: Fix BGP_ATTR_MIN_LEN to account for the length byte. * bgp_open.c: (cap_minsizes) Fix size of CAPABILITY_CODE_RESTART, incorrect -2 left in place from a development version of as4-path patch. * bgp_packet.c: (bgp_route_refresh_receive) ORF length parameter needs to be properly sanity checked. * tests/bgp_capability_test.c: Test for empty capabilities.
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-08-06[bgpd] cleanup, compact and consolidate capability parsing codePaul Jakma
2007-07-26 Paul Jakma <paul.jakma@sun.com> * (general) Clean up and compact capability parsing slightly. Consolidate validation of length and logging of generic TLV, and memcpy of capability data, thus removing such from cap specifc code (not always present or correct). * bgp_open.h: Add structures for the generic capability TLV header and for the data formats of the various specific capabilities we support. Hence remove the badly named, or else misdefined, struct capability. * bgp_open.c: (bgp_capability_vty_out) Use struct capability_mp_data. Do the length checks *before* memcpy()'ing based on that length (stored capability - should have been validated anyway on input, but..). (bgp_afi_safi_valid_indices) new function to validate (afi,safi) which is about to be used as index into arrays, consolidates several instances of same, at least one of which appeared to be incomplete.. (bgp_capability_mp) Much condensed. (bgp_capability_orf_entry) New, process one ORF entry (bgp_capability_orf) Condensed. Fixed to process all ORF entries. (bgp_capability_restart) Condensed, and fixed to use a cap-specific type, rather than abusing capability_mp. (struct message capcode_str) added to aid generic logging. (size_t cap_minsizes[]) added to aid generic validation of capability length field. (bgp_capability_parse) Generic logging and validation of TLV consolidated here. Code compacted as much as possible. * bgp_packet.c: (bgp_open_receive) Capability parsers now use streams, so no more need here to manually fudge the input stream getp. (bgp_capability_msg_parse) use struct capability_mp_data. Validate lengths /before/ memcpy. Use bgp_afi_safi_valid_indices. (bgp_capability_receive) Exported for use by test harness. * bgp_vty.c: (bgp_show_summary) fix conversion warning (bgp_show_peer) ditto * bgp_debug.h: Fix storage 'extern' after type 'const'. * lib/log.c: (mes_lookup) warning about code not being in same-number array slot should be debug, not warning. E.g. BGP has several discontigious number spaces, allocating from different parts of a space is not uncommon (e.g. IANA assigned versus vendor-assigned code points in some number space).
2007-05-04[bgpd] Trim memory usage of BGP routesPaul Jakma
2007-05-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: (struct info) Move less frequently used fields to a lazily allocated struct info_extra. Export bgp_info_extra_get * bgp_route.c: (bgp_info_extra_new) allocate extra (bgp_info_extra_free) Free damp info and the info_extra. (bgp_info_extra_get) Retrieve the info_extra of a struct info, allocating as required. (generally) adjust to use info->extra * bgp_damp.c: (generally) use bgp_info_extra_get to access dampinfo * bgp_attr.h: Move rarely allocated attributes from struct attr to a struct attr_extra, for a substantial saving in size of struct attr. * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. (bgp_attr_extra_get) Get the attr_extra for a given struct attr, allocating it if needs be. (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. (generally) adjust to know about attr->extra. * bgp_debug.c: (bgp_dump_attr) ditto * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. * bgp_nexthop.c: (generally) adjust to know about attr->extra and info->extra. * bgp_{packet,routemap,snmp,zebra}.c: ditto * lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
2006-10-15[bgpd] Coverity CID #64: Needless NULL check, CID #64: Deref of potentially ↵Paul Jakma
NULL pointer. 2006-10-15 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_update_packet) adv->rn can not be NULL, check is bogus - changed to assert(), CID#64. binfo is checked for NULL, but then dereferenced unconditionally, fix, CID #63. (bgp_withdraw_packet) Assert adv->rn is valid, as with bgp_update_packet().
2006-10-15[bgpd] Bug #302 fixes. ClearingCompleted event gets flushed, leaving peers ↵Paul Jakma
stuck in Clearing. 2006-10-14 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.h: Remove BGP_EVENT_FLUSH_ADD, dangerous and not needed. * bgp_fsm.c: (bgp_stop) Move BGP_EVENT_FLUSH to the top of the of the function, otherwise it could flush a ClearingCompleted event, bug #302. * bgp_packet.c: Replace all BGP_EVENT_FLUSH_ADD with BGP_EVENT_ADD, fixing bug #302.
2006-09-14[bgpd] Fix 0.99 shutdown regression, introduce Clearing and Deleted statesPaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * (general) Fix some niggly issues around 'shutdown' and clearing by adding a Clearing FSM wait-state and a hidden 'Deleted' FSM state, to allow deleted peers to 'cool off' and hit 0 references. This introduces a slow memory leak of struct peer, however that's more a testament to the fragility of the reference counting than a bug in this patch, cleanup of reference counting to fix this is to follow. * bgpd.h: Add Clearing, Deleted states and Clearing_Completed and event. * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and Deleted. * bgp_fsm.h: Don't allow timer/event threads to set anything for Deleted peers. * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted needs to stop everything. (bgp_stop) Remove explicit fsm_change_status call, the general framework handles the transition. (bgp_start) Log a warning if a start is attempted on a peer that should stay down, trying to start a peer. (struct .. FSM) Add Clearing_Completed events, has little influence except when in state Clearing to signal wait-state can end. Add Clearing and Deleted states, former is a wait-state, latter is a placeholder state to allow peers to disappear quietly once refcounts settle. (bgp_event) Try reduce verbosity of FSM state-change debug, changes to same state are not interesting (Established->Established) Allow NULL action functions in FSM. * bgp_packet.c: (bgp_write) Use FSM events, rather than trying to twiddle directly with FSM state behind the back of FSM. (bgp_write_notify) ditto. (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else this patch crashes, now it leaks instead. * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed event, to end clearing. (bgp_clear_route) See extensive comments. * bgpd.c: (peer_free) should only be called while in Deleted, peer refcounting controls when peer_free is called. bgp_sync_delete should be here, not in peer_delete. (peer_delete) Initiate delete. Transition to Deleted state manually. When removing peer from indices that provide visibility of it, take great care to be idempotent wrt the reference counting of struct peer through those indices. Use bgp_timer_set, rather than replicating. Call to bgp_sync_delete isn't appropriate here, sync can be referenced while shutting down and finishing deletion. (peer_group_bind) Take care to be idempotent wrt list references indexing peers.
2006-05-04[bgpd] bug #210: Enable crucial VPNv4 code which was disabledPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * (general) VPNv4 fixes. Certain VPNv4 code was not enabled. See bug #210. * bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be u_char really. * bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some VPNv4 code which inexplicably was ifdef'd out. comments from a tester on IRC suggest this fixes bug #210.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* bgp_packet.c: fix compilation when DEBUG is used.
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
2005-06-012005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us add work_queues for bgp_process. * bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. Add bgp_info_{lock,unlock} helper functions. Add bgp_info_{add,delete} helpers, to remove need for users managing locking/freeing of bgp_info and bgp_node's. * bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of nodes. * bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock peer reference as appropriate. * bgpd/bgp_damp.c: Remove its internal prototypes for bgp_info_delete/free. Just use bgp_info_delete. * bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers. (struct peer) Add reference count 'lock' (peer_lock,peer_unlock) New helpers to take/release reference on struct peer. * bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting and balance how references are taken and released. (bgp_advertise_free) release bgp_info reference, if appropriate (bgp_adj_out_free) unlock peer (bgp_advertise_clean) leave the adv references alone, or else call bgp_advertise_free cant unlock them. (bgp_adj_out_set) lock the peer on new adj's, leave the reference alone otherwise. lock the new bgp_info reference. (bgp_adj_in_set) lock the peer reference (bgp_adj_in_remove) and unlock it here (bgp_sync_delete) make hash_free on peer conditional, just in case. * bgpd/bgp_fsm.c: (general) document that the timers depend on bgp_event to release a peer reference. (bgp_fsm_change_status) moved up the file, unchanged. (bgp_stop) Decrement peer lock as many times as cancel_event canceled - shouldnt be needed but just in case. stream_fifo_clean of obuf made conditional, just in case. (bgp_event) always unlock the peer, regardless of return value of bgp_fsm_change_status. * bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs along with a comment on it. * bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup some of the resource management around bgp_info. Refcount peer. Add workqueues for bgp_process and clear_table. (bgp_info_new) make static (bgp_info_free) Ditto, and unlock the peer reference. (bgp_info_lock,bgp_info_unlock) new exported functions (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, taking care of reference counts. (bgp_info_delete) do the opposite of bgp_info_add. (bgp_process_rsclient) Converted into a work_queue work function. (bgp_process_main) ditto. (bgp_processq_del) process work queue item deconstructor (bgp_process_queue_init) process work queue init (bgp_process) call init function if required, set up queue item and add to queue, rather than calling process functions directly. (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts (bgp_rib_withdraw) ditto (bgp_update_rsclient) let bgp_info_add manage refcounts (bgp_update_main) ditto (bgp_clear_route_node) clear_node_queue work function, does per-node aspects of what bgp_clear_route_table did previously (bgp_clear_node_queue_del) clear_node_queue item delete function (bgp_clear_node_complete) clear_node_queue completion function, it unplugs the process queues, which have to be blocked while clear_node_queue is being processed to prevent a race. (bgp_clear_node_queue_init) init function for clear_node_queue work queues (bgp_clear_route_table) Sets up items onto a workqueue now, rather than clearing each node directly. Plugs both process queues to avoid potential race. (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage bgp_info refcounts. (bgp_static_update_rsclient) ditto (bgp_static_update_main) ditto (bgp_static_update_vpnv4) ditto, remove unneeded cast. (bgp_static_withdraw) see bgp_static_withdraw_rsclient (bgp_static_withdraw_vpnv4) ditto (bgp_aggregate_{route,add,delete}) ditto (bgp_redistribute_{add,delete,withdraw}) ditto * bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer reference (peer_rsclient_unset_vty) ditto, but unlock same reference * bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime of struct peer. (peer_lock,peer_unlock) peer refcount helpers (peer_new) add initial refcounts (peer_create,peer_create_accept) lock peer as appropriate (peer_delete) unlock as appropriate, move out some free's to peer_free. (peer_group_bind,peer_group_unbind) peer refcounting as appropriate. (bgp_create) check CALLOC return value. (bgp_terminate) free workqueues too. * lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and MTYPE_BGP_CLEAR_NODE_QUEUE
2005-05-192005-05-19 Paul Jakma <paul@dishone.st>paul
* bgp_network.c: (bgp_accept) use XSTRDUP * bgpd.c: (peer_delete) XFREE the correct memtype, not free. (peer_create) use XSTRDUP * bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used (various) update -> s/bgp_stream_dup/stream_dup
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-02 * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c,hasso
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp graceful-restart" commands added. Show numbers of individual messages in "show ip bgp neighbor" command. Final pieces of graceful restart. [merge from GNU Zebra]
2005-02-01 * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighborhasso
capability route-refresh" commands. Route refresh capability is sent anyway now. Preserve dummy deprecated commands. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2005-01-052005-01-05 Paul Jakma <paul@dishone.st>paul
* bgp_packet.c: (bgp_write) set socket to nonblock while writing this should be generalised. See bugzilla #102. Fix supplied by wawa@yandex-team.ru (Vladimir Ivanov).
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.