| Age | Commit message (Collapse) | Author |
|---|
|
switching the socket to blocking may well block the entire bgpd process
for some time if our peer is overloaded (which may well be the original
reason for the NOTIFY)
The error handling is slightly different from the previous ML discussion
on this; buffer exhaustion isn't technically a fatal TCP error, and we
should probably proceed with FSM actions according to a sent NOTIFY
(adjusting timers) even if we didn't manage to get the NOTIFY onto the
wire.
Acked-by: Leonid Rosenboim <lrosenbo@wrs.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This pushes out the NOTIFY message before closing a connection.
Previously, the TCP_CORK bandwidth optimization code caused NOTIFY
messages to disappear prior to when the connection is closed.
* bgpd/bgp_packet.c: unset CORK, set NODELAY, and replace
writen() by more correct write()
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Keep data flowing, uncork after each BGP_WRITE_PACKET_MAX.
This makes TCP send data sooner, since thread may not be scheduled
again for a a longish time because of new UPDATE's coming in.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The readtime value is for diagnostic, and doesn't have to be highly
accurate. This also fixes a problem where the readtime was being measured
with system clock, but the peer_uptime() was comparing with bgp_clock.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
BGP4-ANVL 20.1 ANVL tries to open BGP with version 5 and expects correct
notification in response. Quagga sends notification, but with incorrect
information in it.
The data needs to be a 2-byte value, and for now we respond with 0004 for any
peer version other than 4.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The timers are rearmed after events processing. After 6a4677b7 we
do not generate events that can rearm the holdtime timer.
Fix it's to call bgp_timer_set() directly as it's done from bgp_event().
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Tested-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* bgp_packet.c: (bgp_update_receive) for every update received we queue
an event just to cancel the holdtime timer, done in bgp_fsm_update().
Instead cancel the timer directly an avoid a scheduling pass.
This incidently fixes another problem found on a slow box, where thousands
of events threads were queued, and run, but never freed, because they are
moved to the unused list that grows without bounds.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Reduce memory heap fragmentation and pressure on the memory allocator.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Just the first change pushes bgp_update_receive() from 6th to ~14th on a
full internet table load profiling session.
* bgp_debug.c: (bgp_update_receive) The attrstr initialization is expensive,
moved under the debug conditional where it is used and just initialize the
first char to NULL.
(bgp_update_default_send) Initialize attrstr needed for bgp_dump_attr().
Moved some buffers used for printing IP[4|6] addresses under the debug
conditionals that use them and reduced its size.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Address problem where bgpd would reject a session if a peer sent some
capabilities in its Open message, but did not include a Multiprotocol
extensions capability. Note that the session would come up if there
were no capabilities at all in the Open message.
* Add the 'mp_capability' out parameter to
bgp_capability_parse(). Set it to '1' if a Multiprotocol
extensions capability is encountered.
* Switch on 'mp_capability' instead of 'capability' in the calling
functions to determine if the peer indicated the set of AFI/SAFIs
it supports.
The net result is that when a peer does not send an MP capability,
it is assumed to support the AFI/SAFIs configured for it locally.
|
|
* bgp_packet.c: (bgp_open_receive) Errors from bgp_open_option_parse are
detected, and the code will stop processing the OPEN and return. However
it does so without calling bgp_notify_send to send a NOTIFY - which means
the peer FSM doesn't get stopped, and bgp_read will be called again later.
Because it returns, it doesn't go through the code near the end of the
function that removes the current message from the peer input streaam.
Thus the next call to bgp_read will try to parse a half-parsed stream as
if it were a new BGP message, leading to an assert later in the code when
it tries to read stuff that isn't there. Add the required call to
bgp_notify_send before returning.
* bgp_open.c: (bgp_capability_as4) Be a bit stricter, check the length field
corresponds to the only value it can be, which is the amount we're going to
read off the stream. And make sure the capability flag gets set, so
callers can know this capability was read, regardless.
(peek_for_as4_capability) Let bgp_capability_as4 do the length check.
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): make consistent with counterpart macros
* bgp_packet.c
* bgp_open_receive(): test using macro instead of ">="
* bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
|
|
This issue has been pointed out by Lou Berger and Tim Browski.
* bgp_packet.c
* bgp_route_refresh_receive(): restore if() condition, which was
broken by commit fdbc8e77c88f751924299d0bc752371d5cc31116
|
|
(with resolved conflict in bgpd/bgp_packet.c)
Two macros resolving to the same integer constant broke a case block and
a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was
performed.
* bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single
* macro
* bgp_capability_test.c: update test data
* bgp_mp_attr_test.c: idem
* bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update
macro and check conditions (where appropriate)
* bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send,
bgp_update_receive, bgp_route_refresh_receive): idem
* bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices,
bgp_open_capability_orf, bgp_open_capability): idem
* bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute,
bgp_packet_withdraw): idem
|
|
|
|
* bgp_packet.c
* bgp_notify_send_with_data(): add calls to zlog_info()
|
|
Contains BGP fixes:
- set extcommunity crash: tihs patch tries to make the refcounting more robust
but does not fully solve the problem, sadly.
- BGP attribute error handling: Little testing.
|
|
* bgp_aspath.c: (assegments_parse) just bail early if length doesn't match
and fix the formatting.
* bgp_network.c: add include needed for set_nonblocking
* bgp_packet.c: formatting
|
|
* bgp_packet.c: (bgp_write) On BGP write, use TCP_CORK to provide hints to
kernel about TCP buffering. This will cause BGP packets to occur in
bigger chunks (full size MTU), improving performance and getting rid of
one of the problems reported in the UNH BGP conformance test.
|
|
* bgpd: Rather than toggling socket in/out of non-block mode, just leave it
in nonblocking mode.
One exception is in bgp_notify which only happens just before close.
|
|
* BGP error handling generally boils down to "reset session". This was fine
when all BGP speakers pretty much understood all BGP messages. However
the increasing deployment of new attribute types has shown this approach
to cause problems, in particular where a new attribute type is "tunneled"
over some speakers which do not understand it, and then arrives at a speaker
which does but considers it malformed (e.g. corruption along the way, or
because of early implementation bugs/interop issues).
To mitigate this drafts before the IDR (likely to be adopted) propose to
treat errors in partial (i.e. not understood by neighbour), optional
transitive attributes, when received from eBGP peers, as withdrawing only
the NLRIs in the affected UPDATE, rather than causing the entire session
to be reset. See:
http://tools.ietf.org/html/draft-scudder-idr-optional-transitive
* bgp_aspath.c: (assegments_parse) Replace the "NULL means valid, 0-length
OR an error" return value with an error code - instead taking
pointer to result structure as arg.
(aspath_parse) adjust to suit previous change, but here NULL really
does mean error in the external interface.
* bgp_attr.h (bgp_attr_parse) use an explictly typed and enumerated
value to indicate return result.
(bgp_attr_unintern_sub) cleans up just the members of an attr, but not the
attr itself, for benefit of those who use a stack-local attr.
* bgp_attr.c: (bgp_attr_unintern_sub) split out from bgp_attr_unintern
(bgp_attr_unintern) as previous.
(bgp_attr_malformed) helper function to centralise decisions on how to
handle errors in attributes.
(bgp_attr_{aspathlimit,origin,etc..}) Use bgp_attr_malformed.
(bgp_attr_aspathlimit) Subcode for error specifc to this attr should be
BGP_NOTIFY_UPDATE_OPT_ATTR_ERR.
(bgp_attr_as4_path) be more rigorous about checks, ala bgp_attr_as_path.
(bgp_attr_parse) Adjust to deal with the additional error level that
bgp_attr_ parsers can raise, and also similarly return appropriate
error back up to (bgp_update_receive). Try to avoid leaking as4_path.
* bgp_packet.c: (bgp_update_receive) Adjust to deal with BGP_ATTR_PARSE_WITHDRAW
error level from bgp_attr_parse, which should lead to a withdraw, by
making the attribute parameter in call to (bgp_nlri_parse) conditional
on the error, so the update case morphs also into a withdraw.
Use bgp_attr_unintern_sub from above, instead of doing this itself.
Fix error case returns which were not calling bgp_attr_unintern_sub
and probably leaking memory.
* tests/aspath_test.c: Fix to work for null return with bad segments
|
|
extcom..'
* Extended communities has some kind of resource allocation problem which
causes a double-free if the 'set extcommunity ...' command is used.
Try fix by properly interning extcommunities.
Also, more generally, make unintern functions take a double pointer
so they can NULL out callers references - a usefully defensive programming
pattern for functions which make refs invalid.
Sadly, this patch doesn't fix the problem entirely - crashes still
occur on session clear.
* bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer
args.
* bgp_community.h: (community_unintern) ditto
* bgp_attr.h: (bgp_attr_intern) ditto
* bgp_aspath.h: (bgp_aspath.h) ditto
* (general) update all callers of above
* bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added
to the attr, and unintern any old one.
(route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used
for the route-map set.
(route_set_ecommunity_*_free) unintern to match, instead of free
(route_set_ecommunity_soo) Do as _rt does and don't just leak
any pre-existing community, add to it (is additive right though?)
|
|
* bgp_packet.c: (bgp_notify_receive) justify the difference between
BGP_NOTIFY_OPEN_UNSUP_PARAM and BGP_NOTIFY_OPEN_UNSUP_CAPBL cases, as
it is explained in RFC5492, page 3, paragraph 1.
"Unsupported Capability" error does not mean, that the peer doesn't
support capabilities advertisement -- quite the opposite (if the peer
would not support capabilities advertisement, the code would be
"Unsupported Optional Parameter"). Thus there is no reason to mark
the peer as one non-supporting capabilities advertisement.
Example: suppose the peer is in fact IPv6-only, but we didn't configure
anything address-family specific for it. Then, the peer would refuse
the session with "Unsupported Capability" code. If we internally set
the peer as non-supporting capabilities advertisement after that, we
will not be able to establish the session with it ever, even with a
fixed configuration -- IPv6-only BGP session cannot be established
without capabilities.
In practice an edge case would be seen as the same IPv6 peer working
with its "neighbor" block read from bgpd.conf, but not working, when
slowly input in "conf t" mode.
|
|
bgpd/bgp_packet.c:bgp_update_packet(): When extracting the peer, don't
fail to extract it because "binfo->extra" is NULL. While one should
certainly avoid dereferencing binfo->extra, that's not a good reason
not to use binfo->peer.
Fixes https://bugzilla.quagga.net/show_bug.cgi?id=497.
Patch by Eric Sobocinksi.
|
|
* bgp_packet.c: (bgp_route_refresh_receive) add validation of
"Length" (RFC5292) field value, check input stream bounds
each time bytes are pulled from it
|
|
BGP uses time() to get system time of day; but that value
fluctuates with time adjustments from NTP. This can cause premature
flapping of peer sessions and other failures.
Use the system monotonic clock supported by Quagga thread library
to avoid issue.
See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467
* bgpd/bgp_fsm.c
* bgp_uptime_reset(): dismiss function
* bgpd/bgpd.c
* bgp_clock(): new function
* bgpd/bgp_damp.c
* bgp_reuse_timer(): employ bgp_clock() instead of time(NULL)
* bgp_damp_withdraw(): idem
* bgp_damp_update(): idem
* bgp_damp_scan(): idem
* bgp_damp_info_vty(): idem
* bgp_damp_reuse_time_vty(): idem
* bgpd/bgp_fsm.c
* bgp_routeadv_timer(): idem
* bgp_stop(): idem
* bgp_establish(): idem
* bgpd/bgp_packet.c
* bgp_update_receive(): idem
* bgpd/bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
* bgp_static_update_rsclient(): idem
* bgp_static_update_main(): idem
* bgp_static_update_vpnv4(): idem
* bgp_aggregate_route(): idem
* bgp_aggregate_add(): idem
* bgp_redistribute_add(): idem
* bgpd/bgp_snmp.c
* bgpPeerTable(): idem
* bgpTrapEstablished(): idem
* bgpTrapBackwardTransition(): idem
* bgpd/bgpd.c
* peer_create(): idem
* peer_uptime(): idem
* bgp_master_init(): idem
|
|
* bgpd/bgp_fsm.c
* bgp_clearing_completed(): only used in one file, can be static
* bgpd/bgp_packet.c
* afi2str(): sayonara
* safi2str(): sayonara
* bgpd/bgp_route.c
* bgp_distance_reset(): sayonara
* bgpd/bgp_zebra.c
* bgp_ifindex_by_nexthop(): sayonara
|
|
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
|
|
|
|
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was
getting hit under certain 4-byte ASN conditions. New realloc strategy.
* bgpd/bgp_aspath.c: (aspath_key_make) const warning fix.
"%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is
above 2^31.
|
|
* bgpd/bgp_packet.c: (bgp_open_receive) Try fix the little race in the FSM,
where a accept-peer that progress faster than realpeer gets closed down if
realpeer is still just in Connect, by allowing the realpeer to be
bgp_stop'ed and doing the regular swapping-of-FSM state.
|
|
* bgp_packet.c: (bgp_open_receive) the accept-peer hack can sometimes
cause a race between two peers that try to establish sessions to each other,
causing session setup to fail when it should have succeeded. In the worst
case, the race can 'loop', causing prolonged failure to establish sessions.
|
|
2008-07-22 Paul Jakma <paul.jakma@sun.com>
* HACKING: Document preference for compiler conditional code, over
cpp conditional.
* configure.ac: DISABLE_BGP_ANNOUNCE always should be defined.
* bgp_{packet,route,advertise}.c: change to compiler testing of
DISABLE_BGP_ANNOUNCE, rather than cpp.
2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable
if a bgpd was compiled with --disable-bgp-announce and if GR is
advertised by peer.
|
|
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_open_receive) fix warning in a zlog call
* bgp_vty.c: (bgp_vty_return) add return code
* bgpd.c: (bgp_master_init) setup the socket list.
* bgp_network.c: Remove the dual IPv4/6 socket thing for now, which
was implemented by Michael, until such time as its clear its
required for Linux (see sockopt comments). IPv6 support, including
IPv4 sessions on AF_INET6 sockets, therefore is broken, and the
'-l 0.0.0.0' arguments would need to be given to bgpd to make
things work here.
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Tomohiko Kusuda <kusuda@inetcore.com>
Leigh Brown <leigh@solinno.co.uk>
* bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5
sockopt and bgpd.
(bgp_md5_set_socket) Helper for bgp_connect
(bgp_md5_set) setup TCP-MD5SIG for the given peer.
(bgp_connect) call out to bgp_md5_set_socket for the outgoing
connect socket.
(bgp_socket) save references to the listen sockets, needed if
TCP-MD5SIG is applied later or changed.
* bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password'
commands.
* bgpd.c: (peer_{new,delete) manage TCP-MD5 password
(peer_group2peer_config_copy) inherit TCP-MD5 password
(peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5
passwords: applying checks, stopping peers, and trying to return
errors to UI, etc.
(bgp_config_write_peer) save password.
Fix missing newline in writeout of neighbor ... port.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: ifdef out various places that converted
v4mapped sockets to pure v4. Doesn't seem necessary at all,
presumably a workaround for now historical inet_ntop bugs (?)
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
|
|
2007-12-22 Paul Jakma <paul.jakma@sun.com>
* Fix series of vulnerabilities reported by "Mu Security
Research Team", where bgpd can be made to crash by sending
malformed packets - requires that bgpd be configured with a
session to the peer.
* bgp_attr.c: (bgp_attr_as4_path) aspath_parse may fail, only
set the attribute flag indicating AS4_PATH if we actually managed
to parse one.
(bgp_attr_munge_as4_attrs) Assert was too general, it is possible
to receive AS4_AGGREGATOR before AGGREGATOR.
(bgp_attr_parse) Check that we have actually received the extra
byte of header for Extended-Length attributes.
* bgp_attr.h: Fix BGP_ATTR_MIN_LEN to account for the length byte.
* bgp_open.c: (cap_minsizes) Fix size of CAPABILITY_CODE_RESTART,
incorrect -2 left in place from a development version of as4-path
patch.
* bgp_packet.c: (bgp_route_refresh_receive) ORF length parameter
needs to be properly sanity checked.
* tests/bgp_capability_test.c: Test for empty capabilities.
|
|
2007-10-14 Paul Jakma <paul.jakma@sun.com>
* NEWS: Note that MRT dumps are now version 2
* (general) Merge in Juergen Kammer's AS4 patch.
2007-09-27 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_normalise) remove duplicates from
from sets.
(aspath_reconcile_as4) disregard a broken part of the RFC around
error handling in path reconciliation.
* aspath_test.c: Test dupe-weeding from sets.
Test that reconciliation merges AS_PATH and AS4_PATH where
former is shorter than latter.
2007-09-26 Paul Jakma <paul.jakma@sun.com>
* aspath_test.c: Test AS4_PATH reconcilation where length
of AS_PATH and AS4_PATH is same.
2007-09-25 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (peek_for_as4_capability) Fix to work.
* bgp_packet.c: (bgp_open_receive) Fix sanity check of as4.
* tests/bgp_capability_test.c: (general) Extend tests to validate
peek_for_as4_capability.
Add test of full OPEN Option block, with multiple capabilities,
both as a series of Option, and a single option.
Add some crap to beginning of stream, to prevent code depending
on getp == 0.
2007-09-18 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (bgp_capability_as4) debug printf inline with others.
(peek_for_as4_capability) There's no need to signal failure, as
failure is better dealt with through full capability parser -
just return the AS4, simpler.
* bgp_packet.c: (bgp_open_receive) Update to match
peek_for_as4_capability change.
Allow use of BGP_AS_TRANS by 2b speakers.
Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors.
(bgp_capability_msg_parse) missing argument to debug print
(bgp_capability_receive) missing return values.
* tests/bgp_capability_test.c: (parse_test) update for changes to
peek_for_as4_capability
2007-07-25 Paul Jakma <paul.jakma@sun.com>
* Remove 2-byte size macros, just make existing macros take
argument to indicate which size to use.
Adjust all users - typically they want '1'.
* bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any
as4's in a path.
(aspath_put) Return the number of bytes actually written, to
fix the bug Juergen noted: Splitting of segments will change
the number of bytes written from that already written to the
AS_PATH header.
(aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP
is still defined as 2b.
(aspath_aggregate) fix latent bug.
(aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation
function.
(aspath_key_make) Hash the AS_PATH string, rather than
just taking the addition of assegment ASes as the hash value,
hopefully sligthly more collision resistant.
(bgp_attr_munge_as4_attrs) Collide the NEW_ attributes
together with the OLD 2-byte forms, code Juergen
had in bgp_attr_parse but re-organised a bit.
(bgp_attr_parse) Bunch of code from Juergen moves
to previous function.
(bgp_packet_attribute) Compact significantly by
just /always/ using extended-length attr header.
Fix bug Juergen noted, by using aspath_put's
(new) returned size value for the attr header rather
than the (guesstimate) of aspath_size() - the two could
differ when aspath_put had to split large segments, unlikely
this bug was ever hit in the 'wild'.
(bgp_dump_routes_attr) Always use extended-len and
use aspath_put return for header length. Output 4b ASN
for AS_PATH and AGGREGATOR.
* bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix
hash callback declarations to match prototypes.
(ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4,
complete rewrite of Juergen's changes (no asdot support)
* bgp_open.c: (bgp_capability_as4) New, does what it says
on the tin.
(peek_for_as4_capability) Rewritten to use streams and
bgp_capability_as4.
* bgp_packet.c: (bgp_open_send) minor edit
checked (in the abstract at least) with Juergen.
Changes are to be more accepting, e.g, allow AS_TRANS on
a 2-byte session.
* (general) Update all commands to use CMD_AS_RANGE.
* bgp_vty.c: (bgp_clear) Fix return vals to use CMD_..
Remove stuff replicated by VTY_GET_LONG
(bgp_clear_vty) Return bgp_clear directly to vty.
* tests/aspath_test.c: Exercise 32bit parsing. Test reconcile
function.
* tests/ecommunity_test.c: New, test AS4 ecommunity changes,
positive test only at this time, error cases not tested yet.
2007-07-25 Juergen Kammer <j.kammer@eurodata.de>
* (general) AS4 support.
* bgpd.h: as_t changes to 4-bytes.
* bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines.
* bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE
added for 2-byte.
Add AS16 versions of length calc macros.
(aspath_count_numas) New, count number of ASes.
(aspath_has_as4) New, return 1 if there are any as4's in a
path.
(assegments_parse) Interpret assegment as 4 or 2 byte,
according to how the caller instructs us, with a new
argument.
(aspath_parse) Add use32bit argument to pass to
assegments_parse. Adjust all its callers to pass 1, unless
otherwise noted.
(assegment_data_put) Adjust to be able to write 2 or 4 byte
AS, according to new use32bit argument.
(aspath_put) Adjust to write 2 or 4.
(aspath_gettoken) Use a long for passed in asno.
* bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and
BGP_ATTR_AS4_AGGREGATOR.
(bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as
determined by received-capability flag.
(bgp_attr_aspath_check) New, code previously in attr_aspath
but moved to new func so it can be run after NEW_AS_PATH
reconciliation.
(bgp_attr_as4_path) New, handle NEW_AS_PATH.
(bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes.
(bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR.
(bgp_attr_parse) Add handoffs to previous parsers for the two
new AS4 NEW_ attributes.
Various checks added for NEW/OLD reconciliation.
(bgp_packet_attribute) Support 2/4 for AS_PATH and
AGGREGATOR, detect when NEW_ attrs need to be sent.
* bgp_debug.{c,h}: Add 'debug bgp as4'.
* bgp_dump.c: MRTv2 support, unconditionally enabled, which
supports AS4. Based on patches from Erik (RIPE?).
* bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4
support.
* bgp_open.c: (peek_for_as4_capability) New, peek for AS4
capability prior to full capability parsing, so we know which
ASN to use for struct peer lookup.
(bgp_open_capability) Always send AS4 capability.
* bgp_packet.c: (bgp_open_send) AS4 handling for AS field
(bgp_open_receive) Peek for AS4 capability first, and figure
out which AS to believe.
* bgp_vty.c: (bgp_show_peer) Print AS4 cap
* tests/aspath_test.c: Support asn32 changes, call aspath_parse
with 16 bit.
* vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER
* vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER
* vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
|
|
2007-07-26 Paul Jakma <paul.jakma@sun.com>
* (general) Clean up and compact capability parsing slightly.
Consolidate validation of length and logging of generic TLV, and
memcpy of capability data, thus removing such from cap specifc
code (not always present or correct).
* bgp_open.h: Add structures for the generic capability TLV header
and for the data formats of the various specific capabilities we
support. Hence remove the badly named, or else misdefined, struct
capability.
* bgp_open.c: (bgp_capability_vty_out) Use struct capability_mp_data.
Do the length checks *before* memcpy()'ing based on that length
(stored capability - should have been validated anyway on input,
but..).
(bgp_afi_safi_valid_indices) new function to validate (afi,safi)
which is about to be used as index into arrays, consolidates
several instances of same, at least one of which appeared to be
incomplete..
(bgp_capability_mp) Much condensed.
(bgp_capability_orf_entry) New, process one ORF entry
(bgp_capability_orf) Condensed. Fixed to process all ORF entries.
(bgp_capability_restart) Condensed, and fixed to use a
cap-specific type, rather than abusing capability_mp.
(struct message capcode_str) added to aid generic logging.
(size_t cap_minsizes[]) added to aid generic validation of
capability length field.
(bgp_capability_parse) Generic logging and validation of TLV
consolidated here. Code compacted as much as possible.
* bgp_packet.c: (bgp_open_receive) Capability parsers now use
streams, so no more need here to manually fudge the input stream
getp.
(bgp_capability_msg_parse) use struct capability_mp_data. Validate
lengths /before/ memcpy. Use bgp_afi_safi_valid_indices.
(bgp_capability_receive) Exported for use by test harness.
* bgp_vty.c: (bgp_show_summary) fix conversion warning
(bgp_show_peer) ditto
* bgp_debug.h: Fix storage 'extern' after type 'const'.
* lib/log.c: (mes_lookup) warning about code not being in
same-number array slot should be debug, not warning. E.g. BGP
has several discontigious number spaces, allocating from
different parts of a space is not uncommon (e.g. IANA
assigned versus vendor-assigned code points in some number
space).
|
|
2007-05-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: (struct info) Move less frequently used
fields to a lazily allocated struct info_extra.
Export bgp_info_extra_get
* bgp_route.c: (bgp_info_extra_new) allocate extra
(bgp_info_extra_free) Free damp info and the info_extra.
(bgp_info_extra_get) Retrieve the info_extra of a struct
info, allocating as required.
(generally) adjust to use info->extra
* bgp_damp.c: (generally) use bgp_info_extra_get to access
dampinfo
* bgp_attr.h: Move rarely allocated attributes from struct attr
to a struct attr_extra, for a substantial saving in size of
struct attr.
* bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory.
(bgp_attr_extra_get) Get the attr_extra for a given struct
attr, allocating it if needs be.
(bgp_attr_dup) Shallow copy the struct attr and its attr_extra.
(generally) adjust to know about attr->extra.
* bgp_debug.c: (bgp_dump_attr) ditto
* bgp_vty.c: (show_bgp_memory) print attr and info extra sizes.
* bgp_nexthop.c: (generally) adjust to know about attr->extra
and info->extra.
* bgp_{packet,routemap,snmp,zebra}.c: ditto
* lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
|
|
NULL pointer.
2006-10-15 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_update_packet) adv->rn can not be NULL,
check is bogus - changed to assert(), CID#64.
binfo is checked for NULL, but then dereferenced
unconditionally, fix, CID #63.
(bgp_withdraw_packet) Assert adv->rn is valid, as with
bgp_update_packet().
|
|
stuck in Clearing.
2006-10-14 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.h: Remove BGP_EVENT_FLUSH_ADD, dangerous and not
needed.
* bgp_fsm.c: (bgp_stop) Move BGP_EVENT_FLUSH to the top of the
of the function, otherwise it could flush a ClearingCompleted
event, bug #302.
* bgp_packet.c: Replace all BGP_EVENT_FLUSH_ADD with
BGP_EVENT_ADD, fixing bug #302.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* (general) VPNv4 fixes. Certain VPNv4 code was not enabled.
See bug #210.
* bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be
u_char really.
* bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some
VPNv4 code which inexplicably was ifdef'd out. comments from
a tester on IRC suggest this fixes bug #210.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
* bgp_packet.c: fix compilation when DEBUG is used.
|
|
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
|
|
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us
add work_queues for bgp_process.
* bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount.
Add bgp_info_{lock,unlock} helper functions.
Add bgp_info_{add,delete} helpers, to remove need for
users managing locking/freeing of bgp_info and bgp_node's.
* bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and
BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of
nodes.
* bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock
peer reference as appropriate.
* bgpd/bgp_damp.c: Remove its internal prototypes for
bgp_info_delete/free. Just use bgp_info_delete.
* bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers.
(struct peer) Add reference count 'lock'
(peer_lock,peer_unlock) New helpers to take/release reference
on struct peer.
* bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting
and balance how references are taken and released.
(bgp_advertise_free) release bgp_info reference, if appropriate
(bgp_adj_out_free) unlock peer
(bgp_advertise_clean) leave the adv references alone, or else
call bgp_advertise_free cant unlock them.
(bgp_adj_out_set) lock the peer on new adj's, leave the reference
alone otherwise. lock the new bgp_info reference.
(bgp_adj_in_set) lock the peer reference
(bgp_adj_in_remove) and unlock it here
(bgp_sync_delete) make hash_free on peer conditional, just in
case.
* bgpd/bgp_fsm.c: (general) document that the timers depend on
bgp_event to release a peer reference.
(bgp_fsm_change_status) moved up the file, unchanged.
(bgp_stop) Decrement peer lock as many times as cancel_event
canceled - shouldnt be needed but just in case.
stream_fifo_clean of obuf made conditional, just in case.
(bgp_event) always unlock the peer, regardless of return value
of bgp_fsm_change_status.
* bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's.
(bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs
along with a comment on it.
* bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup
some of the resource management around bgp_info. Refcount peer.
Add workqueues for bgp_process and clear_table.
(bgp_info_new) make static
(bgp_info_free) Ditto, and unlock the peer reference.
(bgp_info_lock,bgp_info_unlock) new exported functions
(bgp_info_add) Add a bgp_info to a bgp_node in correct fashion,
taking care of reference counts.
(bgp_info_delete) do the opposite of bgp_info_add.
(bgp_process_rsclient) Converted into a work_queue work function.
(bgp_process_main) ditto.
(bgp_processq_del) process work queue item deconstructor
(bgp_process_queue_init) process work queue init
(bgp_process) call init function if required, set up queue item
and add to queue, rather than calling process functions directly.
(bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts
(bgp_rib_withdraw) ditto
(bgp_update_rsclient) let bgp_info_add manage refcounts
(bgp_update_main) ditto
(bgp_clear_route_node) clear_node_queue work function, does
per-node aspects of what bgp_clear_route_table did previously
(bgp_clear_node_queue_del) clear_node_queue item delete function
(bgp_clear_node_complete) clear_node_queue completion function,
it unplugs the process queues, which have to be blocked while
clear_node_queue is being processed to prevent a race.
(bgp_clear_node_queue_init) init function for clear_node_queue
work queues
(bgp_clear_route_table) Sets up items onto a workqueue now, rather
than clearing each node directly. Plugs both process queues to
avoid potential race.
(bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage
bgp_info refcounts.
(bgp_static_update_rsclient) ditto
(bgp_static_update_main) ditto
(bgp_static_update_vpnv4) ditto, remove unneeded cast.
(bgp_static_withdraw) see bgp_static_withdraw_rsclient
(bgp_static_withdraw_vpnv4) ditto
(bgp_aggregate_{route,add,delete}) ditto
(bgp_redistribute_{add,delete,withdraw}) ditto
* bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer
reference
(peer_rsclient_unset_vty) ditto, but unlock same reference
* bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime
of struct peer.
(peer_lock,peer_unlock) peer refcount helpers
(peer_new) add initial refcounts
(peer_create,peer_create_accept) lock peer as appropriate
(peer_delete) unlock as appropriate, move out some free's to
peer_free.
(peer_group_bind,peer_group_unbind) peer refcounting as
appropriate.
(bgp_create) check CALLOC return value.
(bgp_terminate) free workqueues too.
* lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and
MTYPE_BGP_CLEAR_NODE_QUEUE
|
|
* bgp_network.c: (bgp_accept) use XSTRDUP
* bgpd.c: (peer_delete) XFREE the correct memtype, not free.
(peer_create) use XSTRDUP
* bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used
(various) update -> s/bgp_stream_dup/stream_dup
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
|
