summaryrefslogtreecommitdiff
path: root/bgpd/bgp_route.c
AgeCommit message (Collapse)Author
2011-07-05bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d. (cherry picked from commit c8f3fe3063cb9ff193b13011cfbda3e605395340) Conflicts: bgpd/bgp_attr.c (caused by c8e7b895, resolved)
2010-10-21bgpd: fix printed value of last-update timestampVladimir L Ivanov
* bgp_route.c: (route_vty_out_detail) calculate time value in a way, which works regardless of monotonic clock being used or not
2010-10-06bgpd, lib: adopt afi_t and safi_t in several placesMichael Lambert
* bgpd/bgp_attr.c, bgpd/bgp_open.h, bgpd/bgp_route.c, lib/prefix.c, lib/prefix.h: Various integer types were being used where, if we had strict type checking, afi_t and safi_t would be required. Signed-off-by: G.Balaji <balajig81@gmail.com> (cherry picked from commit c8af35ffa2dc79ff7d7ff00b1b61f1f50a100ab6)
2010-01-15bgp: use monotonic clock for time of dayStephen Hemminger
BGP uses time() to get system time of day; but that value fluctuates with time adjustments from NTP. This can cause premature flapping of peer sessions and other failures. Use the system monotonic clock supported by Quagga thread library to avoid issue. See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467 * bgpd/bgp_fsm.c * bgp_uptime_reset(): dismiss function * bgpd/bgpd.c * bgp_clock(): new function * bgpd/bgp_damp.c * bgp_reuse_timer(): employ bgp_clock() instead of time(NULL) * bgp_damp_withdraw(): idem * bgp_damp_update(): idem * bgp_damp_scan(): idem * bgp_damp_info_vty(): idem * bgp_damp_reuse_time_vty(): idem * bgpd/bgp_fsm.c * bgp_routeadv_timer(): idem * bgp_stop(): idem * bgp_establish(): idem * bgpd/bgp_packet.c * bgp_update_receive(): idem * bgpd/bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem * bgp_static_update_rsclient(): idem * bgp_static_update_main(): idem * bgp_static_update_vpnv4(): idem * bgp_aggregate_route(): idem * bgp_aggregate_add(): idem * bgp_redistribute_add(): idem * bgpd/bgp_snmp.c * bgpPeerTable(): idem * bgpTrapEstablished(): idem * bgpTrapBackwardTransition(): idem * bgpd/bgpd.c * peer_create(): idem * peer_uptime(): idem * bgp_master_init(): idem
2009-12-10bgpd: compile warnings cleanupStephen Hemminger
* bgpd/bgp_fsm.c * bgp_clearing_completed(): only used in one file, can be static * bgpd/bgp_packet.c * afi2str(): sayonara * safi2str(): sayonara * bgpd/bgp_route.c * bgp_distance_reset(): sayonara * bgpd/bgp_zebra.c * bgp_ifindex_by_nexthop(): sayonara
2009-07-21[bgp] Fix nexthop reachability check on confederationsVasilis Tsiligiannis
* bgp_route.c: (bgp_update_main) Nexthop reachability should be checked for confederations too in case a prefix is received from more than one confederation peers.
2009-07-21[bgpd] fix typo made by paul in previous commitPaul Jakma
2009-07-21[bgpd] Small buffer overrun in bgp_clear_node_queue_initNick Hilliard
* bgp_route.c: (bgp_clear_node_queue_init) fix buffer overrun.
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-06-26[bgpd] Log a debug/update warning if filters are configured but don't existPaul Jakma
* bgp_route.c: (bgp_{input,output}_filter) Log a debug warning if a route is received or sent and a filter name is configured for a prefix, as or distribute list but none is found - guaranteed configuration mistake.
2009-06-24[bgpd] Add 'show ip bgp view WORD neighbors IP (advertised|received)-routes'Tomasz Pala
* bgp_route.c: Was missing these commands.
2009-06-23Fix "show ip bgp dampened-paths" garbage output.Chris Caputo
* bgpd/bgp_damp.c: Make bgp_damp_reuse_time_vty() accept a buffer and length, rather than returning a local var buffer whose contents can get trounced. Remove duplicate BGP_UPTIME_LEN define. * bgpd/bgp_damp.h: bgp_damp_reuse_time_vty() prototype change. * bgpd/bgp_route.c: Provide bgp_damp_reuse_time_vty() with a buffer and length. Remove duplicate BGP_UPTIME_LEN define. This problem was noticed in 2005... http://hibernia.jakma.org/~paul/patches/quagga-test.diff ...but the fix didn't make it into the code. Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-18[bgpd] reference count the BGP instanceStephen Hemminger
When a BGP instance is deleted with lots of routes and neighbors it is possible for the peer rsclient queue to run after bgp_delete has been called. This would lead to bgpd crashing, see https://bugzilla.vyatta.com/show_bug.cgi?id=3436 The fix is to add reference counting to the BGP instance and defer actual freeing until all references are gone. This patch also fixes a memory leak where the self-reference peer instance was being created but never freed. The check in bgp_clear_route is no longer valid because it is possible for it to be called when peer is in Deleted state during cleanup.
2009-06-18[bgpd] Make declarations matchStephen Hemminger
These variables are const.
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2009-04-30[bgpd] AS4 bugfix by Chris Caputo <ccaputo@alt.net>Denis Ovsienko
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was getting hit under certain 4-byte ASN conditions. New realloc strategy. * bgpd/bgp_aspath.c: (aspath_key_make) const warning fix. "%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is above 2^31.
2008-09-24[bgpd] Fix definition of an rsclient commandMichael Lambert
* bgp_route.c: (show_ip_bgp_view_rsclient_route_cmd) Add the missing "ip" to the command string. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-23[vty] Add support for a 'restricted mode' with anonymous vty connectionsPaul Jakma
* lib/command.h: Add a RESTRICTED_NODE, intended for use with anonymous, 'no login' vtys, to provide a subset of 'view' mode commands. * lib/command.c: Add RESTRICTED_NODE bits, nothing special, just following VIEW_NODE. * lib/vty.c: (vty_auth) enable authentication should fall back to restricted/view node as appropriate. (vty_create) init vty's to restricted/view node as appropriate, for the 'no login' case. (vty_{no_,}restricted_mode_cmd) config commands to enable 'anonymous restricted' in vty configuration. (vty_config_write) 'anonymous restricted' config. (vty_init) Install some commands to restricted mode, and the 'anonymous restricted' config commands into VTY_NODE. * bgpd/*.c: Install some of the safe(r) BGP commands into 'restricted mode', i.e. lookup commands of non-sensitive data. Useful with looking-glass route-servers.
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-07-22[bgpd] Fix triggerable crash when compiled with --disable-bgp-announcePaul Jakma
2008-07-22 Paul Jakma <paul.jakma@sun.com> * HACKING: Document preference for compiler conditional code, over cpp conditional. * configure.ac: DISABLE_BGP_ANNOUNCE always should be defined. * bgp_{packet,route,advertise}.c: change to compiler testing of DISABLE_BGP_ANNOUNCE, rather than cpp. 2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable if a bgpd was compiled with --disable-bgp-announce and if GR is advertised by peer.
2008-04-10+ [bgpd] Added new route-map set statement: "as-path ignore"Denis Ovsienko
2007-08-30[bgpd] bug #398 Bogus free on out route-map, and assert() with rsclientsPaul Jakma
2007-08-27 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_announce_check) Fix bug #398, slight modification of Vladimir Ivanov's suggested fix - to keep memory alloc conditional. (bgp_process_announce_selected) Don't take struct attr as argument, none of the callers need it and it needlessly distances allocation from use. Free the extended attr, the attr itself is on the stack. Fix bad indentation. * bgp_attr.c: (bgp_packet_attribute) Remove incorrect assert, and adjust conditional to test attr->extra, diagnosis by Vladimir Ivanov in bug #398. 2007-08-27 Vladimir Ivanov <wawa@yandex-team.ru> * bgp_route.c: (bgp_announce_check_rsclient) copy of ri->attr is no longer deep enough, due to addition of attr->extra. It should use bgp_attr_dup, as bgp_announce_check() does.
2007-08-06[bgpd] Add support for AS_PATHLIMIT / draft-ietf-idr-as-pathlimitPaul Jakma
2007-07-31 Paul Jakma <paul.jakma@sun.com> * (general) Support for draft-ietf-idr-as-pathlimit-03. * bgp_attr.h: (struct attr) Add pathlimit struct bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. (attrhash_key_make) tally pathlimit too (attrhash_cmp) cmp pathlimit attr (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. (bgp_attr_parse) ditto (bgp_packet_attribute) Write out AS_PATHLIMIT when set (bgp_dump_routes_attr) ditto * bgp_route.h: (struct bgp_static) Add TTL field * bgp_route.c: (bgp_announce_check) Drop paths that are over their hop-count TTL before sending via EBGP. Mangle ASN in pathlimit for confeds/private as best we can. (bgp_static_update_{rsclient,main}) Add any configure pathlimit information. (bgp_pathlimit_update_parents) New, update atomic-aggr setting for parents of an aspathlimit'ed static. (bgp_static_set) Add TTL argument, for all the 'bgp network' commands. Call previous for TTL changed statics. (bgp_static_unset) Call pathlimit_update_parents. (various bgp network commands) Add 'pathlimit <0-255>' qualifier to all the various forms, bar route-map - which can set ttl itself. * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and 'match pathlimit as'. * doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
2007-06-14[bgpd] bug #370, default-originate was broken by a silly thinkoPaul Jakma
2007-05-25 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_default_originate) Sanity check added previously was broken and always failed, thus this function never could run, bug #370.
2007-05-04[bgpd] Trim memory usage of BGP routesPaul Jakma
2007-05-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: (struct info) Move less frequently used fields to a lazily allocated struct info_extra. Export bgp_info_extra_get * bgp_route.c: (bgp_info_extra_new) allocate extra (bgp_info_extra_free) Free damp info and the info_extra. (bgp_info_extra_get) Retrieve the info_extra of a struct info, allocating as required. (generally) adjust to use info->extra * bgp_damp.c: (generally) use bgp_info_extra_get to access dampinfo * bgp_attr.h: Move rarely allocated attributes from struct attr to a struct attr_extra, for a substantial saving in size of struct attr. * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. (bgp_attr_extra_get) Get the attr_extra for a given struct attr, allocating it if needs be. (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. (generally) adjust to know about attr->extra. * bgp_debug.c: (bgp_dump_attr) ditto * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. * bgp_nexthop.c: (generally) adjust to know about attr->extra and info->extra. * bgp_{packet,routemap,snmp,zebra}.c: ditto * lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
2007-04-10[bgpd] V. quick route flap gets mistaken for duplicate, route is then ignoredPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (general) Same bug as fixed on 2006-11-28 by ajs for bgp static routes, but for main BGP RIB: Quick 'flap' of routes can cause bgpd to mistake a new route for a duplicate route, due to presence of removed, but not yet processed BGP RIB entry. (bgp_update_rsclient) Ignore REMOVED bgp_info for duplicate, restore route instead. (bgp_update_main) Ditto.
2007-02-22[bgpd] Peer delete can race with reconfig leading to crashPaul Jakma
2007-02-22 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: (bgp_fsm_change_status) Handle state change into clearing or greater here. Simpler. (bgp_event) Clearing state change work moved to previous * bgp_route.c: (bgp_clear_route_node) Clearing adj-in here is too late, as it leaves a race between a peer being deleted and an identical peer being configured before clearing completes, leading to a crash. Simplest fix is to clean peers Adj-in up-front, rather than queueing such work. (bgp_clear_route_table) Clear peer's Adj-In and Adj-Out up-front here, rather than queueing such work. Extensive comment added on the various bits of indexed data that exist and how they need to be dealt with. (bgp_clear_route) Update comment.
2006-11-28[bgpd] Fix bug where a deleted route that was quickly re-added was being lostAndrew J. Schorr
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * bgp_route.c: (bgp_info_restore) New function that undoes the effects of a previous call to bgp_info_delete. This is used when a route is deleted and quickly re-added before the deletion has been processed. (bgp_static_update_rsclient, bgp_static_update_main, bgp_redistribute_add) Check whether a pre-existing route has the BGP_INFO_REMOVED set, and, if so, we need to call bgp_info_restore to resurrect it.
2006-10-27[bgpd] trivial: non C99 u_int.._t should be uint.._tPaul Jakma
2006-10-27 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats) oops, u_intXX_t should be uintXX_t
2006-10-22[bgpd] struct peer must have bgp field valid (redistribute crash)Paul Jakma
2006-10-19 Paul Jakma <paul.jakma@sun.com> * bgpd.c: (peer_new) bgp element of peer absolutely must be filled in, make peer_new() require it as argument and update all callers. Fixes a crash reported by Jan 'yanek' Bortl and Andrew Schorr where bgpd would crash in bgp_pcount_adjust trying to dereference the bgp member of bgp->peer_self, triggered through redistribution. * bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
2006-10-15[bgpd] CID#73, potential crash in bgp statistics if called for AFI/SAFI with ↵Paul Jakma
emtpy table 2006-10-15 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats_walker) NULL deref if table is empty, bgp_table_top may return NULL, Coverity CID#73.
2006-09-14[bgpd] reduce the process queue hold time to something more sensiblePaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_process_queue_init) process queue hold time too high, adds extra memory load. Change to be much lower, until such time as it's made configurable.
2006-09-14[bgpd] RIB statistics address space size shouldnt double count spacePaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats_walker) Address space announced should only count top-level unaggregateable prefixes, to avoid falling afoul of anti-dodgy-accounting regulations in various jurisdictions.. ;)
2006-09-14[bgpd] Fix 0.99 shutdown regression, introduce Clearing and Deleted statesPaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * (general) Fix some niggly issues around 'shutdown' and clearing by adding a Clearing FSM wait-state and a hidden 'Deleted' FSM state, to allow deleted peers to 'cool off' and hit 0 references. This introduces a slow memory leak of struct peer, however that's more a testament to the fragility of the reference counting than a bug in this patch, cleanup of reference counting to fix this is to follow. * bgpd.h: Add Clearing, Deleted states and Clearing_Completed and event. * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and Deleted. * bgp_fsm.h: Don't allow timer/event threads to set anything for Deleted peers. * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted needs to stop everything. (bgp_stop) Remove explicit fsm_change_status call, the general framework handles the transition. (bgp_start) Log a warning if a start is attempted on a peer that should stay down, trying to start a peer. (struct .. FSM) Add Clearing_Completed events, has little influence except when in state Clearing to signal wait-state can end. Add Clearing and Deleted states, former is a wait-state, latter is a placeholder state to allow peers to disappear quietly once refcounts settle. (bgp_event) Try reduce verbosity of FSM state-change debug, changes to same state are not interesting (Established->Established) Allow NULL action functions in FSM. * bgp_packet.c: (bgp_write) Use FSM events, rather than trying to twiddle directly with FSM state behind the back of FSM. (bgp_write_notify) ditto. (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else this patch crashes, now it leaks instead. * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed event, to end clearing. (bgp_clear_route) See extensive comments. * bgpd.c: (peer_free) should only be called while in Deleted, peer refcounting controls when peer_free is called. bgp_sync_delete should be here, not in peer_delete. (peer_delete) Initiate delete. Transition to Deleted state manually. When removing peer from indices that provide visibility of it, take great care to be idempotent wrt the reference counting of struct peer through those indices. Use bgp_timer_set, rather than replicating. Call to bgp_sync_delete isn't appropriate here, sync can be referenced while shutting down and finishing deletion. (peer_group_bind) Take care to be idempotent wrt list references indexing peers.
2006-09-14[bgpd] Add RIB reporting commands, show bgp ... statisticsPaul Jakma
2006-09-13 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_highest) new, return highest ASN in an aspath. * bgp_route.c: (bgp_peer_count_walker) new, do the walk done in bgp_peer_counts as a thread. (bgp_peer_counts) move walk to previous and call it via thread_execute so this RIB walk shows up in thread stats. (bgp_table_stats) New, gather some statistics for a given RIB. (bgp_table_stats_walker) New, RIB walker thread for former. (bgp_table_stats_vty) Parsing front-end for 'show bgp ...', useful model for future rationalisation of 'show ... bgp'. (bgp_route_init) Add new RIB stats commands.
2006-09-07[bgpd] Handle pcount as flags are changed, fixing pcount issuesPaul Jakma
2006-09-06 Paul Jakma <paul.jakma@sun.com> * (general) Squash any and all prefix-count issues by abstracting route flag changes, and maintaining count as and when flags are modified (rather than relying on explicit modifications of count being sprinkled in just the right places throughout the code). * bgp_route.c: (bgp_pcount_{dec,inc}rement) removed. (bgp_pcount_adjust) new, update prefix count as needed for a given route. (bgp_info_{uns,s}et_flag) set/unset a BGP_INFO route status flag, calling previous function when appropriate. (general) Update all set/unsets of flags to use previous. Remove pcount_{dec,inc}rement calls. No need to unset BGP_INFO_VALID in places where bgp_info_delete is called, it does that anyway. * bgp_{damp,nexthop}.c: Update to use bgp_info_{un,}set_flag. * bgp_route.h: Export bgp_info_{un,}set_flag. Add a 'meta' BGP_INFO flag, BGP_INFO_UNUSEABLE. Move BGP_INFO_HOLDDOWN macro to here from bgpd.h
2006-09-04[bgpd] Add 'show ... neighbor .... prefix-counts' commandPaul Jakma
2006-09-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: Add 'show ... bgp ... <neighbour> prefix-count' commands, to provide detailed counts of prefixes for a peer. Informative, and should help pin down to pfxcnt drift problems.
2006-05-12[bgpd] CID #4,#5,#9,#10, simplify aspath_print_vty usagePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.{c,h}: (aspath_print_vty) take a format string, so as to reduce burden on callers, all in bgp_route.c * bgp_route.c: (route_vty_out{,tmp}) Update to match aspath_print_vty, simplifying checks needed to get spacing right. CID #4,#5. ({damp,flap}_route_vty_out) Ditto, CID #9, #10
2006-05-12[bgpd] CID #6, remove useless NULL check, bgp_static_update_rsclientPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_static_update_rsclient) Remove useless NULL check, code already assumes bgp_static can not be NULL, fixes CID #6.
2006-05-12[bgpd] CID #7, remove useless NULL check, bgp_static_update_mainPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_static_update_main) Remove useless NULL check, code already assumes bgp_static can not be NULL, fixes CID #7.
2006-05-08[bgpd] Bug #240, Fix route-server crash when static routes are configuredPaul Jakma
2006-05-08 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_afi_node_get) given table should never be NULL, check/assert this. (bgp_static_update) Bug #240. Rsclients should only be passed the static update if they are configured for the afi,safi.
2006-05-04[bgpd] Fix bug where FSM can stay hung forever in Idle/ClrngPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (general) Fix logical bug in clearing, noted by Chris Caputo in [quagga-users 6728] - clearing depended on at least one route being added to workqueue, in order for workqueue completion function to restart FSM. However, if no routes are cleared, then the completion function never is called, it needs to be called manually if the workqueue didn't get scheduled. Finally, clearing is per-peer-session, not per AFI/SAFI, so the FSM synchronisation should be in bgp_clear_route_table. (bgp_clear_route_table) Wrong place for FSM/clearing synchronisation, move to.. (bgp_clear_route) FSM/clearing synchronisation should be here. If no routes were cleared, no workqueue scheduled, call the completion func to ensure FSM kicks off again.
2006-03-06[bgpd] Start off FSM again once clearing finishes.Paul Jakma
2006-03-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_clear_node_complete) Doh. When clearing is complete we need to kick off FSM again.
2006-02-21[bgpd] Record afi/safi in bgp_table. Serialise peer clear with FSM.Paul Jakma
2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgpd.h: move the clear_node_queue to be peer specific. Add a new peer status flag, PEER_STATUS_CLEARING. * bgp_table.h: (struct bgp_table) Add fields to record afi, safi of the table. (bgp_table_init) Take afi and safi to create table for. * bgp_table.c: (bgp_table_init) record the afi and safi. * bgp_nexthop.c: Update all calls to bgp_table_init. * bgp_vty.c: ditto. * bgpd.c: ditto. * bgp_fsm.c: (bgp_timer_set) dont bring up a session which is clearing. * bgp_route.c: (general) Update all bgp_table_init calls. (bgp_process_{rsclient,main}) clear_node is serialised via PEER_STATUS_CLEARING and fsm now. (struct bgp_clear_node_queue) can be removed. struct bgp_node can be the queue item data directly, as struct peer can be kept in the new wq global user data and afi/safi can be retrieved via bgp_node -> bgp_table. (bgp_clear_route_node) fix to get peer via wq->spec.data, afi/safi via bgp_node->bgp_table. (bgp_clear_node_queue_del) no more item data to delete, only unlock the bgp_node. (bgp_clear_node_complete) only need to unset CLEARING flag and unlock struct peer. (bgp_clear_node_queue_init) queue attaches to struct peer now. record peer name as queue name. (bgp_clear_route_table) If queue transitions to active, serialise clearing by setting PEER_STATUS_CLEARING rather than plugging process queue, and lock peer while queue active. Update to pass only bgp_node as per-queue-item specific data.
2006-02-18[bgpd] trivial readability fixPaul Jakma
2006-02-18 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_announce_check) trivial, move declaration of two local variables into the only block where they are used, to aid the reader.
2006-02-05[bgpd] Fix peer prefix counts and make it slightly more robustpaul
2006-02-05 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: Add BGP_INFO_COUNTED to track whether prefix has been counted or not. * bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to centralise inc/dec of prefix-count, (bgp_rib_remove) Remove pcount decrement, use helper. (bgp_rib_withdraw) ditto, additionally use previous function too. (bgp_update_main) Use pcount helpers. (bgp_clear_route_node) ditto, aslo REMOVED routes don't need clearing.
2006-02-02[lib/workqueue] remove the useless 'delay' factor.paul
2006-02-02 Paul Jakma <paul.jakma@sun.com> * workqueue.h: (struct work_queue) Remove the delay field. It served no purpose and just introduced bad behaviour. Should be excised before its allowed to escape into 1.0. This removes need for the 'flood' and runs_since_clear fields. * workqueue.c: (general) excise delay factor between queue runs, hence the 'flood' crap too.. See above. * bgp_route.c: (bgp_{clear_node,process}_queue_init) delay field is removed from workqueue spec.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2005-11-142005-11-14 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (rib_process) convert to new workqueue specs and shut up gcc, which complains about cast from void via function parameters, for some dumb reason. Do the cast inside the function instead. (rib_queue_qnode_del) ditto. (rib_queue_init) no need for the casts anymore.