| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network
which is HAVE_IPV6, so these should be too.
(bgp_route_init) and the installs should be similarly ifdefed
|
|
Two macros resolving to the same integer constant broke a case block and
a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was
performed.
* bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single
* macro
* bgp_capability_test.c: update test data
* bgp_mp_attr_test.c: idem
* bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update
macro and check conditions (where appropriate)
* bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send,
bgp_update_receive, bgp_route_refresh_receive): idem
* bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices,
bgp_open_capability_orf, bgp_open_capability): idem
* bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute,
bgp_packet_withdraw): idem
|
|
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659)
* bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
|
|
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its
author does not think it will make progress in IDR. Remove all support
introduced for it, but leave stubs for the commands to avoid breaking
any configurations.
Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
(cherry picked from commit c8f3fe3063cb9ff193b13011cfbda3e605395340)
Conflicts:
bgpd/bgp_attr.c (caused by c8e7b895, resolved)
|
|
* bgp_route.c: (route_vty_out_detail) calculate time value
in a way, which works regardless of monotonic clock
being used or not
|
|
* bgpd/bgp_attr.c, bgpd/bgp_open.h, bgpd/bgp_route.c, lib/prefix.c,
lib/prefix.h: Various integer types were being used where, if we
had strict type checking, afi_t and safi_t would be required.
Signed-off-by: G.Balaji <balajig81@gmail.com>
(cherry picked from commit c8af35ffa2dc79ff7d7ff00b1b61f1f50a100ab6)
|
|
BGP uses time() to get system time of day; but that value
fluctuates with time adjustments from NTP. This can cause premature
flapping of peer sessions and other failures.
Use the system monotonic clock supported by Quagga thread library
to avoid issue.
See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467
* bgpd/bgp_fsm.c
* bgp_uptime_reset(): dismiss function
* bgpd/bgpd.c
* bgp_clock(): new function
* bgpd/bgp_damp.c
* bgp_reuse_timer(): employ bgp_clock() instead of time(NULL)
* bgp_damp_withdraw(): idem
* bgp_damp_update(): idem
* bgp_damp_scan(): idem
* bgp_damp_info_vty(): idem
* bgp_damp_reuse_time_vty(): idem
* bgpd/bgp_fsm.c
* bgp_routeadv_timer(): idem
* bgp_stop(): idem
* bgp_establish(): idem
* bgpd/bgp_packet.c
* bgp_update_receive(): idem
* bgpd/bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
* bgp_static_update_rsclient(): idem
* bgp_static_update_main(): idem
* bgp_static_update_vpnv4(): idem
* bgp_aggregate_route(): idem
* bgp_aggregate_add(): idem
* bgp_redistribute_add(): idem
* bgpd/bgp_snmp.c
* bgpPeerTable(): idem
* bgpTrapEstablished(): idem
* bgpTrapBackwardTransition(): idem
* bgpd/bgpd.c
* peer_create(): idem
* peer_uptime(): idem
* bgp_master_init(): idem
|
|
* bgpd/bgp_fsm.c
* bgp_clearing_completed(): only used in one file, can be static
* bgpd/bgp_packet.c
* afi2str(): sayonara
* safi2str(): sayonara
* bgpd/bgp_route.c
* bgp_distance_reset(): sayonara
* bgpd/bgp_zebra.c
* bgp_ifindex_by_nexthop(): sayonara
|
|
* bgp_route.c: (bgp_update_main) Nexthop reachability should be checked for
confederations too in case a prefix is received from more than one
confederation peers.
|
|
|
|
* bgp_route.c: (bgp_clear_node_queue_init) fix buffer
overrun.
|
|
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
|
|
* bgp_route.c: (bgp_{input,output}_filter) Log a debug warning if a route is
received or sent and a filter name is configured for a prefix, as or
distribute list but none is found - guaranteed configuration mistake.
|
|
* bgp_route.c: Was missing these commands.
|
|
* bgpd/bgp_damp.c: Make bgp_damp_reuse_time_vty() accept a buffer and
length, rather than returning a local var buffer whose contents can get
trounced. Remove duplicate BGP_UPTIME_LEN define.
* bgpd/bgp_damp.h: bgp_damp_reuse_time_vty() prototype change.
* bgpd/bgp_route.c: Provide bgp_damp_reuse_time_vty() with a buffer and
length. Remove duplicate BGP_UPTIME_LEN define.
This problem was noticed in 2005...
http://hibernia.jakma.org/~paul/patches/quagga-test.diff
...but the fix didn't make it into the code.
Signed-off-by: Chris Caputo <ccaputo@alt.net>
|
|
When a BGP instance is deleted with lots of routes and neighbors
it is possible for the peer rsclient queue to run after
bgp_delete has been called. This would lead to bgpd crashing,
see https://bugzilla.vyatta.com/show_bug.cgi?id=3436
The fix is to add reference counting to the BGP instance and defer
actual freeing until all references are gone.
This patch also fixes a memory leak where the self-reference
peer instance was being created but never freed.
The check in bgp_clear_route is no longer valid because it is possible
for it to be called when peer is in Deleted state during cleanup.
|
|
These variables are const.
|
|
Use Ansi-C prototypes rather than old K&R method of declaring
function without arguments
|
|
Simple conversion of XMALLOC/memset to XCALLOC
|
|
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was
getting hit under certain 4-byte ASN conditions. New realloc strategy.
* bgpd/bgp_aspath.c: (aspath_key_make) const warning fix.
"%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is
above 2^31.
|
|
* bgp_route.c: (show_ip_bgp_view_rsclient_route_cmd) Add the missing "ip"
to the command string.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
* lib/command.h: Add a RESTRICTED_NODE, intended for use with
anonymous, 'no login' vtys, to provide a subset of 'view' mode
commands.
* lib/command.c: Add RESTRICTED_NODE bits, nothing special, just
following VIEW_NODE.
* lib/vty.c: (vty_auth) enable authentication should fall back to
restricted/view node as appropriate.
(vty_create) init vty's to restricted/view node as appropriate,
for the 'no login' case.
(vty_{no_,}restricted_mode_cmd) config commands to enable
'anonymous restricted' in vty configuration.
(vty_config_write) 'anonymous restricted' config.
(vty_init) Install some commands to restricted mode, and the
'anonymous restricted' config commands into VTY_NODE.
* bgpd/*.c: Install some of the safe(r) BGP commands into
'restricted mode', i.e. lookup commands of non-sensitive data.
Useful with looking-glass route-servers.
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* */*: Fix various problems flagged by Sun Studio compiler.
- '<qualifier> <storage>' obsolescent in declarations
- empty statements (';' after ALIAS definitions)
- implicit declarations (e.g printstack in lib/log.c)
- "\%" in printf string instead of "%%"
- loops that return on the first iteration (legitimately, but
compiler can't really know), e.g. bgp_routemap.c
- internal declarations which mask prototypes.
|
|
2008-07-22 Paul Jakma <paul.jakma@sun.com>
* HACKING: Document preference for compiler conditional code, over
cpp conditional.
* configure.ac: DISABLE_BGP_ANNOUNCE always should be defined.
* bgp_{packet,route,advertise}.c: change to compiler testing of
DISABLE_BGP_ANNOUNCE, rather than cpp.
2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable
if a bgpd was compiled with --disable-bgp-announce and if GR is
advertised by peer.
|
|
|
|
2007-08-27 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_announce_check) Fix bug #398, slight
modification of Vladimir Ivanov's suggested fix - to keep
memory alloc conditional.
(bgp_process_announce_selected) Don't take struct attr as
argument, none of the callers need it and it needlessly
distances allocation from use.
Free the extended attr, the attr itself is on the stack.
Fix bad indentation.
* bgp_attr.c: (bgp_packet_attribute) Remove incorrect assert,
and adjust conditional to test attr->extra, diagnosis by
Vladimir Ivanov in bug #398.
2007-08-27 Vladimir Ivanov <wawa@yandex-team.ru>
* bgp_route.c: (bgp_announce_check_rsclient) copy of
ri->attr is no longer deep enough, due to addition of
attr->extra. It should use bgp_attr_dup, as
bgp_announce_check() does.
|
|
2007-07-31 Paul Jakma <paul.jakma@sun.com>
* (general) Support for draft-ietf-idr-as-pathlimit-03.
* bgp_attr.h: (struct attr) Add pathlimit struct
bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string.
(attrhash_key_make) tally pathlimit too
(attrhash_cmp) cmp pathlimit attr
(bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr.
(bgp_attr_parse) ditto
(bgp_packet_attribute) Write out AS_PATHLIMIT when set
(bgp_dump_routes_attr) ditto
* bgp_route.h: (struct bgp_static) Add TTL field
* bgp_route.c: (bgp_announce_check) Drop paths that are over
their hop-count TTL before sending via EBGP.
Mangle ASN in pathlimit for confeds/private as best we can.
(bgp_static_update_{rsclient,main}) Add any configure pathlimit
information.
(bgp_pathlimit_update_parents) New, update atomic-aggr setting for
parents of an aspathlimit'ed static.
(bgp_static_set) Add TTL argument, for all the 'bgp network'
commands.
Call previous for TTL changed statics.
(bgp_static_unset) Call pathlimit_update_parents.
(various bgp network commands) Add 'pathlimit <0-255>' qualifier
to all the various forms, bar route-map - which can set ttl
itself.
* bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and
'match pathlimit as'.
* doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
|
|
2007-05-25 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_default_originate) Sanity check added
previously was broken and always failed, thus this function
never could run, bug #370.
|
|
2007-05-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: (struct info) Move less frequently used
fields to a lazily allocated struct info_extra.
Export bgp_info_extra_get
* bgp_route.c: (bgp_info_extra_new) allocate extra
(bgp_info_extra_free) Free damp info and the info_extra.
(bgp_info_extra_get) Retrieve the info_extra of a struct
info, allocating as required.
(generally) adjust to use info->extra
* bgp_damp.c: (generally) use bgp_info_extra_get to access
dampinfo
* bgp_attr.h: Move rarely allocated attributes from struct attr
to a struct attr_extra, for a substantial saving in size of
struct attr.
* bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory.
(bgp_attr_extra_get) Get the attr_extra for a given struct
attr, allocating it if needs be.
(bgp_attr_dup) Shallow copy the struct attr and its attr_extra.
(generally) adjust to know about attr->extra.
* bgp_debug.c: (bgp_dump_attr) ditto
* bgp_vty.c: (show_bgp_memory) print attr and info extra sizes.
* bgp_nexthop.c: (generally) adjust to know about attr->extra
and info->extra.
* bgp_{packet,routemap,snmp,zebra}.c: ditto
* lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
|
|
2007-04-08 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (general) Same bug as fixed on 2006-11-28 by ajs for
bgp static routes, but for main BGP RIB: Quick 'flap' of routes
can cause bgpd to mistake a new route for a duplicate route,
due to presence of removed, but not yet processed BGP RIB entry.
(bgp_update_rsclient) Ignore REMOVED bgp_info for duplicate,
restore route instead.
(bgp_update_main) Ditto.
|
|
2007-02-22 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.c: (bgp_fsm_change_status) Handle state change into
clearing or greater here. Simpler.
(bgp_event) Clearing state change work moved to previous
* bgp_route.c: (bgp_clear_route_node) Clearing adj-in here
is too late, as it leaves a race between a peer being deleted
and an identical peer being configured before clearing
completes, leading to a crash.
Simplest fix is to clean peers Adj-in up-front, rather than
queueing such work.
(bgp_clear_route_table) Clear peer's Adj-In and Adj-Out
up-front here, rather than queueing such work.
Extensive comment added on the various bits of indexed data
that exist and how they need to be dealt with.
(bgp_clear_route) Update comment.
|
|
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* bgp_route.c: (bgp_info_restore) New function that undoes
the effects of a previous call to bgp_info_delete. This is
used when a route is deleted and quickly re-added before the
deletion has been processed.
(bgp_static_update_rsclient, bgp_static_update_main,
bgp_redistribute_add) Check whether a pre-existing route
has the BGP_INFO_REMOVED set, and, if so, we need to call
bgp_info_restore to resurrect it.
|
|
2006-10-27 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats) oops, u_intXX_t should be
uintXX_t
|
|
2006-10-19 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_new) bgp element of peer absolutely must be
filled in, make peer_new() require it as argument and update
all callers. Fixes a crash reported by Jan 'yanek' Bortl and
Andrew Schorr where bgpd would crash in bgp_pcount_adjust
trying to dereference the bgp member of bgp->peer_self,
triggered through redistribution.
* bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
|
|
emtpy table
2006-10-15 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats_walker) NULL deref if table is
empty, bgp_table_top may return NULL, Coverity CID#73.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_process_queue_init) process queue hold time
too high, adds extra memory load. Change to be much lower,
until such time as it's made configurable.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_table_stats_walker) Address space announced
should only count top-level unaggregateable prefixes, to
avoid falling afoul of anti-dodgy-accounting regulations
in various jurisdictions.. ;)
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
|
|
2006-09-13 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (aspath_highest) new, return highest ASN in an
aspath.
* bgp_route.c: (bgp_peer_count_walker) new, do the walk done
in bgp_peer_counts as a thread.
(bgp_peer_counts) move walk to previous and call it via
thread_execute so this RIB walk shows up in thread stats.
(bgp_table_stats) New, gather some statistics for a given
RIB.
(bgp_table_stats_walker) New, RIB walker thread for former.
(bgp_table_stats_vty) Parsing front-end for 'show bgp ...',
useful model for future rationalisation of 'show ... bgp'.
(bgp_route_init) Add new RIB stats commands.
|
|
2006-09-06 Paul Jakma <paul.jakma@sun.com>
* (general) Squash any and all prefix-count issues by
abstracting route flag changes, and maintaining count as and
when flags are modified (rather than relying on explicit
modifications of count being sprinkled in just the right
places throughout the code).
* bgp_route.c: (bgp_pcount_{dec,inc}rement) removed.
(bgp_pcount_adjust) new, update prefix count as
needed for a given route.
(bgp_info_{uns,s}et_flag) set/unset a BGP_INFO route status
flag, calling previous function when appropriate.
(general) Update all set/unsets of flags to use previous.
Remove pcount_{dec,inc}rement calls.
No need to unset BGP_INFO_VALID in places where
bgp_info_delete is called, it does that anyway.
* bgp_{damp,nexthop}.c: Update to use bgp_info_{un,}set_flag.
* bgp_route.h: Export bgp_info_{un,}set_flag.
Add a 'meta' BGP_INFO flag, BGP_INFO_UNUSEABLE.
Move BGP_INFO_HOLDDOWN macro to here from bgpd.h
|
|
2006-09-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: Add 'show ... bgp ... <neighbour> prefix-count'
commands, to provide detailed counts of prefixes for a peer.
Informative, and should help pin down to pfxcnt drift
problems.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.{c,h}: (aspath_print_vty) take a format string,
so as to reduce burden on callers, all in bgp_route.c
* bgp_route.c: (route_vty_out{,tmp}) Update to match
aspath_print_vty, simplifying checks needed to get spacing
right. CID #4,#5.
({damp,flap}_route_vty_out) Ditto, CID #9, #10
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_rsclient) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #6.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_static_update_main) Remove useless NULL
check, code already assumes bgp_static can not be NULL,
fixes CID #7.
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_afi_node_get) given table should never be
NULL, check/assert this.
(bgp_static_update) Bug #240. Rsclients should only be passed
the static update if they are configured for the afi,safi.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (general) Fix logical bug in clearing, noted
by Chris Caputo in [quagga-users 6728] - clearing depended on
at least one route being added to workqueue, in order for
workqueue completion function to restart FSM. However, if no
routes are cleared, then the completion function never is
called, it needs to be called manually if the workqueue
didn't get scheduled.
Finally, clearing is per-peer-session, not per AFI/SAFI, so
the FSM synchronisation should be in bgp_clear_route_table.
(bgp_clear_route_table) Wrong place for FSM/clearing
synchronisation, move to..
(bgp_clear_route) FSM/clearing synchronisation should be
here.
If no routes were cleared, no workqueue scheduled, call
the completion func to ensure FSM kicks off again.
|
|
2006-03-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_clear_node_complete) Doh. When clearing
is complete we need to kick off FSM again.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-02-18 Paul Jakma <paul.jakma@sun.com>
* bgp_route.c: (bgp_announce_check) trivial, move declaration
of two local variables into the only block where they are
used, to aid the reader.
|
|
2006-02-05 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: Add BGP_INFO_COUNTED to track whether
prefix has been counted or not.
* bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to
centralise inc/dec of prefix-count,
(bgp_rib_remove) Remove pcount decrement, use helper.
(bgp_rib_withdraw) ditto, additionally use previous function
too.
(bgp_update_main) Use pcount helpers.
(bgp_clear_route_node) ditto, aslo REMOVED routes don't need
clearing.
|
