summaryrefslogtreecommitdiff
path: root/bgpd/bgp_route.c
AgeCommit message (Collapse)Author
2011-09-29bgpd: more SAFI fixesDenis Ovsienko
(with resolved conflict in bgpd/bgp_packet.c) Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-09-29bgpd: fix SAFI for for MPLS labeled VPN-IPv6Denis Ovsienko
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659) * bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
2011-07-29Merge branch 'attr-errors'Paul Jakma
Contains BGP fixes: - set extcommunity crash: tihs patch tries to make the refcounting more robust but does not fully solve the problem, sadly. - BGP attribute error handling: Little testing.
2011-03-23bgpd: Fix compile failure if IPv6 build was disabled.Paul Jakma
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network which is HAVE_IPV6, so these should be too. (bgp_route_init) and the installs should be similarly ifdefed
2011-03-21bgpd: New show commands for improved view and address family supportMichael Lambert
Many show commands do not have support for multiple views and do not treat different address families uniformly. The following changes add a number of commands with support for views and rationalized treatment of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and more recent versions of IOS). * bgp_route.c: (bgp_show_community) Inserted a new second argument (the name of the view) and the code to look up that name in the BGP structure. The NULL argument in the call to bgp_show (indicating the default view) was replaced by the specified view. The existing calls to bgp_show_community had a NULL second argument inserted to make clear that they refer to the default view. (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp ipv4 (unicast|multicast) show bgp ipv4 (unicast|multicast) A.B.C.D show bgp ipv4 (unicast|multicast) A.B.C.D/M show bgp ipv6 (unicast|multicast) show bgp ipv6 (unicast|multicast) X:X::X:X show bgp ipv6 (unicast|multicast) X:X::X:X/M These show either the full BGP table or the specified route or prefix for the given address family. show bgp view WORD (ipv4|ipv6) (unicast|multicast) community show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \ (AA:NN|local-AS|no-advertise|no-export){1,4} For the specified view and address family, these show entries matching any community or the specified communit(y)(ies). show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \ (A.B.C.D|X:X::X:X) (advertised-routes|received-routes) For the specified view and address family, show the routes advertised to or received from the given BGP neighbor. show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M For the specifed (optional) view and address family, show either the full BGP table or the specified route or prefix for the given route server client peer. * bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary For the specified (optional) view and address family, display either the normal summary table for BGP peers, or the route server client table showing the import and export policies.
2011-03-21bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
2011-03-21bgpd: Try fix extcommunity resource allocation probs, particularly with 'set ↵Paul Jakma
extcom..' * Extended communities has some kind of resource allocation problem which causes a double-free if the 'set extcommunity ...' command is used. Try fix by properly interning extcommunities. Also, more generally, make unintern functions take a double pointer so they can NULL out callers references - a usefully defensive programming pattern for functions which make refs invalid. Sadly, this patch doesn't fix the problem entirely - crashes still occur on session clear. * bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer args. * bgp_community.h: (community_unintern) ditto * bgp_attr.h: (bgp_attr_intern) ditto * bgp_aspath.h: (bgp_aspath.h) ditto * (general) update all callers of above * bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added to the attr, and unintern any old one. (route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used for the route-map set. (route_set_ecommunity_*_free) unintern to match, instead of free (route_set_ecommunity_soo) Do as _rt does and don't just leak any pre-existing community, add to it (is additive right though?)
2011-03-21bgpd: Fix display of unsigned attributesWataru Tanitsu
* bgp_route.c: (route_vty_out*) The local prefix, metric and weight values are all stored as uint32_t. Change the format to %u so that large values are not displayed as negative integers.
2011-03-21bgpd: fix use of free memory by update_rsclientStephen Hemminger
* bgp_route.c: (bgp_static_update_rsclient) BGP sometimes crashes when removing route server client because of use after free. The code to update rsclient created a local static copy of bgp attributes but neglected to handle the extra information pointer. The extra information was getting freed by bgp_attr_unintern() and reused later when the copy was passed to bgp_attr_intern(). The fix is to use the attr_dup function to create a copy of the extra information, then clean it up.
2011-03-21bgpd: unlock node on aggregate errorRobert Bays
* bgp_route.c: (bgp_aggregate_set) make sure to unlock BGP node if failure
2011-03-21bgpd: fix errors in aggregate address commandRobert Bays
* bgpd: (bgp_aggregate_{set,unset,delete}) This fixes locking and other issues with aggregate set/unset command
2011-03-21bgpd: fix bgp_node locking issuesChris Caputo
* bgpd: Connected table locks were being locked but not unlocked, such that eventually a lock would exceed 2^31 and become negative, thus triggering an assert later on. * bgp_main.c: (bgp_exit) delete connected elements along with ifp's. * bgp_nexthop.c: (bgp_nexthop_lookup{,_ipv6}) add missing unlocks (bgp_multiaccess_check_v4) ditto (bgp_connected_{add,delete}) Use a distinct memtype for bgp_connected_ref. (bgp_scan_finish) reset the nexthop cache to clean it up when bgpd exits * bgp_route.c: fix missing bgp_node unlocks * lib/memtype.c: (memory_list_bgp) add MTYPE_BGP_CONN * testing: has been tested for almost 2 months now.
2011-03-20Merge paul/ospfd/201012-review ospfd and lib/ fixes and performance improvementsPaul Jakma
2011-03-18bgpd: improve "monotonic" uptime correctionJohn Kemp
Older versions of Quagga/Zebra would output a value in MRT table dump files for "uptime" aka "ORIGINATED" that was a WALL clock value. Given that uptime is now internally a bgp_clock MONOTONIC value, the output in the MRT files is showing up as monotonic. Note: time of MRT dump is still recorded correctly as a time() based value, so we haven't lost that value. Proposal is to correct the uptime output on the vty and in the MRT files to again display something more akin to WALL time. * bgp_dump.c: (bgp_dump_routes_func) add conditional correction * bgp_route.c: (route_vty_out_detail) make correction conditional, move variable declaration to beginning of the function
2010-12-08bgpd: Simplify process queue initPaul Jakma
* bgp_route.c: (bgp_process_queue_init) rsclient wasn't getting all the same things initialised as the main queue. Simplify to make it more robust.
2010-10-21bgpd: fix printed value of last-update timestampVladimir L Ivanov
* bgp_route.c: (route_vty_out_detail) calculate time value in a way, which works regardless of monotonic clock being used or not
2010-10-06bgpd, lib: adopt afi_t and safi_t in several placesMichael Lambert
* bgpd/bgp_attr.c, bgpd/bgp_open.h, bgpd/bgp_route.c, lib/prefix.c, lib/prefix.h: Various integer types were being used where, if we had strict type checking, afi_t and safi_t would be required. Signed-off-by: G.Balaji <balajig81@gmail.com> (cherry picked from commit c8af35ffa2dc79ff7d7ff00b1b61f1f50a100ab6)
2010-01-15bgp: use monotonic clock for time of dayStephen Hemminger
BGP uses time() to get system time of day; but that value fluctuates with time adjustments from NTP. This can cause premature flapping of peer sessions and other failures. Use the system monotonic clock supported by Quagga thread library to avoid issue. See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467 * bgpd/bgp_fsm.c * bgp_uptime_reset(): dismiss function * bgpd/bgpd.c * bgp_clock(): new function * bgpd/bgp_damp.c * bgp_reuse_timer(): employ bgp_clock() instead of time(NULL) * bgp_damp_withdraw(): idem * bgp_damp_update(): idem * bgp_damp_scan(): idem * bgp_damp_info_vty(): idem * bgp_damp_reuse_time_vty(): idem * bgpd/bgp_fsm.c * bgp_routeadv_timer(): idem * bgp_stop(): idem * bgp_establish(): idem * bgpd/bgp_packet.c * bgp_update_receive(): idem * bgpd/bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem * bgp_static_update_rsclient(): idem * bgp_static_update_main(): idem * bgp_static_update_vpnv4(): idem * bgp_aggregate_route(): idem * bgp_aggregate_add(): idem * bgp_redistribute_add(): idem * bgpd/bgp_snmp.c * bgpPeerTable(): idem * bgpTrapEstablished(): idem * bgpTrapBackwardTransition(): idem * bgpd/bgpd.c * peer_create(): idem * peer_uptime(): idem * bgp_master_init(): idem
2009-12-10bgpd: compile warnings cleanupStephen Hemminger
* bgpd/bgp_fsm.c * bgp_clearing_completed(): only used in one file, can be static * bgpd/bgp_packet.c * afi2str(): sayonara * safi2str(): sayonara * bgpd/bgp_route.c * bgp_distance_reset(): sayonara * bgpd/bgp_zebra.c * bgp_ifindex_by_nexthop(): sayonara
2009-07-21[bgp] Fix nexthop reachability check on confederationsVasilis Tsiligiannis
* bgp_route.c: (bgp_update_main) Nexthop reachability should be checked for confederations too in case a prefix is received from more than one confederation peers.
2009-07-21[bgpd] fix typo made by paul in previous commitPaul Jakma
2009-07-21[bgpd] Small buffer overrun in bgp_clear_node_queue_initNick Hilliard
* bgp_route.c: (bgp_clear_node_queue_init) fix buffer overrun.
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-06-26[bgpd] Log a debug/update warning if filters are configured but don't existPaul Jakma
* bgp_route.c: (bgp_{input,output}_filter) Log a debug warning if a route is received or sent and a filter name is configured for a prefix, as or distribute list but none is found - guaranteed configuration mistake.
2009-06-24[bgpd] Add 'show ip bgp view WORD neighbors IP (advertised|received)-routes'Tomasz Pala
* bgp_route.c: Was missing these commands.
2009-06-23Fix "show ip bgp dampened-paths" garbage output.Chris Caputo
* bgpd/bgp_damp.c: Make bgp_damp_reuse_time_vty() accept a buffer and length, rather than returning a local var buffer whose contents can get trounced. Remove duplicate BGP_UPTIME_LEN define. * bgpd/bgp_damp.h: bgp_damp_reuse_time_vty() prototype change. * bgpd/bgp_route.c: Provide bgp_damp_reuse_time_vty() with a buffer and length. Remove duplicate BGP_UPTIME_LEN define. This problem was noticed in 2005... http://hibernia.jakma.org/~paul/patches/quagga-test.diff ...but the fix didn't make it into the code. Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-18[bgpd] reference count the BGP instanceStephen Hemminger
When a BGP instance is deleted with lots of routes and neighbors it is possible for the peer rsclient queue to run after bgp_delete has been called. This would lead to bgpd crashing, see https://bugzilla.vyatta.com/show_bug.cgi?id=3436 The fix is to add reference counting to the BGP instance and defer actual freeing until all references are gone. This patch also fixes a memory leak where the self-reference peer instance was being created but never freed. The check in bgp_clear_route is no longer valid because it is possible for it to be called when peer is in Deleted state during cleanup.
2009-06-18[bgpd] Make declarations matchStephen Hemminger
These variables are const.
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2009-04-30[bgpd] AS4 bugfix by Chris Caputo <ccaputo@alt.net>Denis Ovsienko
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was getting hit under certain 4-byte ASN conditions. New realloc strategy. * bgpd/bgp_aspath.c: (aspath_key_make) const warning fix. "%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is above 2^31.
2008-09-24[bgpd] Fix definition of an rsclient commandMichael Lambert
* bgp_route.c: (show_ip_bgp_view_rsclient_route_cmd) Add the missing "ip" to the command string. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-23[vty] Add support for a 'restricted mode' with anonymous vty connectionsPaul Jakma
* lib/command.h: Add a RESTRICTED_NODE, intended for use with anonymous, 'no login' vtys, to provide a subset of 'view' mode commands. * lib/command.c: Add RESTRICTED_NODE bits, nothing special, just following VIEW_NODE. * lib/vty.c: (vty_auth) enable authentication should fall back to restricted/view node as appropriate. (vty_create) init vty's to restricted/view node as appropriate, for the 'no login' case. (vty_{no_,}restricted_mode_cmd) config commands to enable 'anonymous restricted' in vty configuration. (vty_config_write) 'anonymous restricted' config. (vty_init) Install some commands to restricted mode, and the 'anonymous restricted' config commands into VTY_NODE. * bgpd/*.c: Install some of the safe(r) BGP commands into 'restricted mode', i.e. lookup commands of non-sensitive data. Useful with looking-glass route-servers.
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-07-22[bgpd] Fix triggerable crash when compiled with --disable-bgp-announcePaul Jakma
2008-07-22 Paul Jakma <paul.jakma@sun.com> * HACKING: Document preference for compiler conditional code, over cpp conditional. * configure.ac: DISABLE_BGP_ANNOUNCE always should be defined. * bgp_{packet,route,advertise}.c: change to compiler testing of DISABLE_BGP_ANNOUNCE, rather than cpp. 2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable if a bgpd was compiled with --disable-bgp-announce and if GR is advertised by peer.
2008-04-10+ [bgpd] Added new route-map set statement: "as-path ignore"Denis Ovsienko
2007-08-30[bgpd] bug #398 Bogus free on out route-map, and assert() with rsclientsPaul Jakma
2007-08-27 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_announce_check) Fix bug #398, slight modification of Vladimir Ivanov's suggested fix - to keep memory alloc conditional. (bgp_process_announce_selected) Don't take struct attr as argument, none of the callers need it and it needlessly distances allocation from use. Free the extended attr, the attr itself is on the stack. Fix bad indentation. * bgp_attr.c: (bgp_packet_attribute) Remove incorrect assert, and adjust conditional to test attr->extra, diagnosis by Vladimir Ivanov in bug #398. 2007-08-27 Vladimir Ivanov <wawa@yandex-team.ru> * bgp_route.c: (bgp_announce_check_rsclient) copy of ri->attr is no longer deep enough, due to addition of attr->extra. It should use bgp_attr_dup, as bgp_announce_check() does.
2007-08-06[bgpd] Add support for AS_PATHLIMIT / draft-ietf-idr-as-pathlimitPaul Jakma
2007-07-31 Paul Jakma <paul.jakma@sun.com> * (general) Support for draft-ietf-idr-as-pathlimit-03. * bgp_attr.h: (struct attr) Add pathlimit struct bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. (attrhash_key_make) tally pathlimit too (attrhash_cmp) cmp pathlimit attr (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. (bgp_attr_parse) ditto (bgp_packet_attribute) Write out AS_PATHLIMIT when set (bgp_dump_routes_attr) ditto * bgp_route.h: (struct bgp_static) Add TTL field * bgp_route.c: (bgp_announce_check) Drop paths that are over their hop-count TTL before sending via EBGP. Mangle ASN in pathlimit for confeds/private as best we can. (bgp_static_update_{rsclient,main}) Add any configure pathlimit information. (bgp_pathlimit_update_parents) New, update atomic-aggr setting for parents of an aspathlimit'ed static. (bgp_static_set) Add TTL argument, for all the 'bgp network' commands. Call previous for TTL changed statics. (bgp_static_unset) Call pathlimit_update_parents. (various bgp network commands) Add 'pathlimit <0-255>' qualifier to all the various forms, bar route-map - which can set ttl itself. * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and 'match pathlimit as'. * doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
2007-06-14[bgpd] bug #370, default-originate was broken by a silly thinkoPaul Jakma
2007-05-25 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_default_originate) Sanity check added previously was broken and always failed, thus this function never could run, bug #370.
2007-05-04[bgpd] Trim memory usage of BGP routesPaul Jakma
2007-05-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: (struct info) Move less frequently used fields to a lazily allocated struct info_extra. Export bgp_info_extra_get * bgp_route.c: (bgp_info_extra_new) allocate extra (bgp_info_extra_free) Free damp info and the info_extra. (bgp_info_extra_get) Retrieve the info_extra of a struct info, allocating as required. (generally) adjust to use info->extra * bgp_damp.c: (generally) use bgp_info_extra_get to access dampinfo * bgp_attr.h: Move rarely allocated attributes from struct attr to a struct attr_extra, for a substantial saving in size of struct attr. * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. (bgp_attr_extra_get) Get the attr_extra for a given struct attr, allocating it if needs be. (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. (generally) adjust to know about attr->extra. * bgp_debug.c: (bgp_dump_attr) ditto * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. * bgp_nexthop.c: (generally) adjust to know about attr->extra and info->extra. * bgp_{packet,routemap,snmp,zebra}.c: ditto * lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
2007-04-10[bgpd] V. quick route flap gets mistaken for duplicate, route is then ignoredPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (general) Same bug as fixed on 2006-11-28 by ajs for bgp static routes, but for main BGP RIB: Quick 'flap' of routes can cause bgpd to mistake a new route for a duplicate route, due to presence of removed, but not yet processed BGP RIB entry. (bgp_update_rsclient) Ignore REMOVED bgp_info for duplicate, restore route instead. (bgp_update_main) Ditto.
2007-02-22[bgpd] Peer delete can race with reconfig leading to crashPaul Jakma
2007-02-22 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: (bgp_fsm_change_status) Handle state change into clearing or greater here. Simpler. (bgp_event) Clearing state change work moved to previous * bgp_route.c: (bgp_clear_route_node) Clearing adj-in here is too late, as it leaves a race between a peer being deleted and an identical peer being configured before clearing completes, leading to a crash. Simplest fix is to clean peers Adj-in up-front, rather than queueing such work. (bgp_clear_route_table) Clear peer's Adj-In and Adj-Out up-front here, rather than queueing such work. Extensive comment added on the various bits of indexed data that exist and how they need to be dealt with. (bgp_clear_route) Update comment.
2006-11-28[bgpd] Fix bug where a deleted route that was quickly re-added was being lostAndrew J. Schorr
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * bgp_route.c: (bgp_info_restore) New function that undoes the effects of a previous call to bgp_info_delete. This is used when a route is deleted and quickly re-added before the deletion has been processed. (bgp_static_update_rsclient, bgp_static_update_main, bgp_redistribute_add) Check whether a pre-existing route has the BGP_INFO_REMOVED set, and, if so, we need to call bgp_info_restore to resurrect it.
2006-10-27[bgpd] trivial: non C99 u_int.._t should be uint.._tPaul Jakma
2006-10-27 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats) oops, u_intXX_t should be uintXX_t
2006-10-22[bgpd] struct peer must have bgp field valid (redistribute crash)Paul Jakma
2006-10-19 Paul Jakma <paul.jakma@sun.com> * bgpd.c: (peer_new) bgp element of peer absolutely must be filled in, make peer_new() require it as argument and update all callers. Fixes a crash reported by Jan 'yanek' Bortl and Andrew Schorr where bgpd would crash in bgp_pcount_adjust trying to dereference the bgp member of bgp->peer_self, triggered through redistribution. * bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
2006-10-15[bgpd] CID#73, potential crash in bgp statistics if called for AFI/SAFI with ↵Paul Jakma
emtpy table 2006-10-15 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats_walker) NULL deref if table is empty, bgp_table_top may return NULL, Coverity CID#73.
2006-09-14[bgpd] reduce the process queue hold time to something more sensiblePaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_process_queue_init) process queue hold time too high, adds extra memory load. Change to be much lower, until such time as it's made configurable.
2006-09-14[bgpd] RIB statistics address space size shouldnt double count spacePaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_table_stats_walker) Address space announced should only count top-level unaggregateable prefixes, to avoid falling afoul of anti-dodgy-accounting regulations in various jurisdictions.. ;)
2006-09-14[bgpd] Fix 0.99 shutdown regression, introduce Clearing and Deleted statesPaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * (general) Fix some niggly issues around 'shutdown' and clearing by adding a Clearing FSM wait-state and a hidden 'Deleted' FSM state, to allow deleted peers to 'cool off' and hit 0 references. This introduces a slow memory leak of struct peer, however that's more a testament to the fragility of the reference counting than a bug in this patch, cleanup of reference counting to fix this is to follow. * bgpd.h: Add Clearing, Deleted states and Clearing_Completed and event. * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and Deleted. * bgp_fsm.h: Don't allow timer/event threads to set anything for Deleted peers. * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted needs to stop everything. (bgp_stop) Remove explicit fsm_change_status call, the general framework handles the transition. (bgp_start) Log a warning if a start is attempted on a peer that should stay down, trying to start a peer. (struct .. FSM) Add Clearing_Completed events, has little influence except when in state Clearing to signal wait-state can end. Add Clearing and Deleted states, former is a wait-state, latter is a placeholder state to allow peers to disappear quietly once refcounts settle. (bgp_event) Try reduce verbosity of FSM state-change debug, changes to same state are not interesting (Established->Established) Allow NULL action functions in FSM. * bgp_packet.c: (bgp_write) Use FSM events, rather than trying to twiddle directly with FSM state behind the back of FSM. (bgp_write_notify) ditto. (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else this patch crashes, now it leaks instead. * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed event, to end clearing. (bgp_clear_route) See extensive comments. * bgpd.c: (peer_free) should only be called while in Deleted, peer refcounting controls when peer_free is called. bgp_sync_delete should be here, not in peer_delete. (peer_delete) Initiate delete. Transition to Deleted state manually. When removing peer from indices that provide visibility of it, take great care to be idempotent wrt the reference counting of struct peer through those indices. Use bgp_timer_set, rather than replicating. Call to bgp_sync_delete isn't appropriate here, sync can be referenced while shutting down and finishing deletion. (peer_group_bind) Take care to be idempotent wrt list references indexing peers.
2006-09-14[bgpd] Add RIB reporting commands, show bgp ... statisticsPaul Jakma
2006-09-13 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_highest) new, return highest ASN in an aspath. * bgp_route.c: (bgp_peer_count_walker) new, do the walk done in bgp_peer_counts as a thread. (bgp_peer_counts) move walk to previous and call it via thread_execute so this RIB walk shows up in thread stats. (bgp_table_stats) New, gather some statistics for a given RIB. (bgp_table_stats_walker) New, RIB walker thread for former. (bgp_table_stats_vty) Parsing front-end for 'show bgp ...', useful model for future rationalisation of 'show ... bgp'. (bgp_route_init) Add new RIB stats commands.