| Age | Commit message (Collapse) | Author |
|---|
|
If a peer with soft-reconfiguration configured is cleared, the
function bgp_clear_route_table() doesn't free the bgp_adj_in and bgp_adj_out
structures of route nodes that for some reason, ej. denied by a filter,
don't have routes attached "rn->info == NULL".
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Reviewed-by: Leonid Rosenboim <Leonid.Rosenboim@windriver.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Make the BGP table code a thin wrapper around the table implementation
in libzebra.
* bgpd/bgp_table.[ch]
- Use the ROUTE_NODE_FIELDS macro to embed the fields of a
route_node in the bgp_node structure.
- Add a route_table field to the bgp_table structure.
Initialize the route_table with a delegate, such that the nodes
in the table are bgp_node structures.
- Add inline wrappers that call route_table functions underneath,
and accept/return the correct BGP types.
* bgpd/bgp_route.c
Change some code to use inline wrappers instead of accessing
fields of nodes/tables directly. The latter does not always work
because the types of some fields need to be translated now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The change from bgp_node_get() to bgp_node_lookup() broke aggregation.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Tested-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
If there were no aggregates configured this functions were allocating
and freeing a struct bgp_node for every call, and it's called for every
prefix received.
* bgp_route.c: Bail out early if the there are no aggregates configured.
Change from bgp_node_get() to bgp_node_lookup() that does not allocate
a new struct bgp_node if not found.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Avoids 3 checks per call.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
It's initialized below
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Try to use on stack structs for temporary uses.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The call to bgp_attr_default_set() above creates the attr_extra struct,
but the attr.extra = NULL initialization was leaking it.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* bgp_attr.c: (bgp_attr_default_intern) bgp_attr_default_set() already
initializes the memory. Fixes a struct attr_extra leak.
* bgp_route.c: Remove useless on stack struct initializations.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* bgp_route.c: (bgp_info_cmp) Reduce indirections, precalculate some
values that are used several times, reduce conditionals.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
peer_sort() it's called so much as to be annoying. In the assumption
that the 'sort' of the peer doesn't change during an established session,
I have changed all calls to peer_sort() in the 'fast-path' to only check
the 'sort'. All the calls from the vty and such still recalculate the sort
and store it in the peer.
There's a lot of other calls to peer_sort() that could be changed but some
maube tricky, someone more knowledgeable may try to reduce them.
This hits peer_sort() from 5th out of the stadium^H^H list on a full
internet table loading profiling session.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This function scores 2nd, profiling a full internet table load. It's called
for every prefix received.
Instead of looping in the interface lists comparing addresses use a hash
to mantain them.
* bgpd.c: Init the own address hash.
* bgp_nexthop.c: Introduce methods to maintain an own address hash.
(bgp_connected_add) add addresses to the hash.
(bgp_connected_delete) delete addresses from the hash.
(bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t
parameter.
* bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to
not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
bgp_afi_node_get() expects a non-NULL prd for a SAFI_MPLS_VPN prefix.
* bgp_route.c: pass down the struct prefix_rd from bgp_soft_reconfig_in()
and bgp_soft_reconfig_rsclient().
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
sockunion_str2su() use is prone to memory leaks. Remove it's use all over
the code.
At least these commands leaked a sockunion union:
- show ip bgp vpnv4 ... routes
- show ip bgp ... received prefix-filter
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Metrics are unsigned values.
* bgpd/bgp_{debug,route,vty}.c,
* zebra/zebra_vty.c: replace %d with %u for metrics & distances
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[reworded commit message]
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Conflicts:
bgpd/bgp_route.c
|
|
The patch adds the ipv6 network command in the BGP multicast address
family mode.
|
|
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
|
|
bgp_nexthop_lookup_ipv6(): declare variables where they are actually
used, drop no-op initialization (the field is already 0)
bgp_nexthop_lookup(): ditto
bgp_nexthop_check_ebgp(): rename to bgp_nexthop_onlink()
bgp_nexthop_cache_changed(): rename to bgp_nexthop_cache_different()
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): make consistent with counterpart macros
* bgp_packet.c
* bgp_open_receive(): test using macro instead of ">="
* bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
BGP was ignoring nexthop info for static and other redistributed
routes for IPv6. Build extra attribute info to store the nexthop.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=6073
|
|
(with resolved conflict in bgpd/bgp_packet.c)
Two macros resolving to the same integer constant broke a case block and
a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was
performed.
* bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single
* macro
* bgp_capability_test.c: update test data
* bgp_mp_attr_test.c: idem
* bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update
macro and check conditions (where appropriate)
* bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send,
bgp_update_receive, bgp_route_refresh_receive): idem
* bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices,
bgp_open_capability_orf, bgp_open_capability): idem
* bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute,
bgp_packet_withdraw): idem
|
|
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659)
* bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
|
|
Contains BGP fixes:
- set extcommunity crash: tihs patch tries to make the refcounting more robust
but does not fully solve the problem, sadly.
- BGP attribute error handling: Little testing.
|
|
advertised is based on the bestpath attribute set, but the
following attributes are aggregated from the attribute sets
of the multipath constituents:
- AS_PATH
- ORIGIN
- COMMUNITIES
- EXTENDED COMMUNITIES
In addition the route is advertised with the NEXT_HOP set
to the router's interface IP address, instead of the NEXT_HOP
of the best path. This is to ensure that traffic will go to this
router so it can be fanned out via the multipath route.
* bgpd/ecommunity.c
* ecommunity_uniq_sort(): Make this function externally accessible
* bgpd/ecommunity.h
* Add external declaration for ecommunity_uniq_sort()
* bgpd/bgp_mpath.c
* bgp_info_nexthop_cmp(): Replace calls to bgp_attr_extra_get()
to avoid unwanted memory allocation
* bgp_info_mpath_free(): Free aggregate attribute for multipath
* bgp_info_mpath_attr(): Lookup aggregate attribute of a multipath route
* bgp_info_mpath_attr_set(): Set aggregate attribute of a multipath route
* bgp_info_mpath_aggregate_update(): Update the aggregate attribute
of a multipath route
* bgpd/bgp_mpath.h
* bgp_info_mpath: Add pointer to hold aggregate attribute of a multipath
* Add external declarations for new functions
* bgpd/bgp_route.c
* bgp_announce_check(): Use aggregate attribute when announcing multipath
route
* bgp_announce_check_rsclient(): Use aggregate attribute when announcing
multipath route
* bgp_best_selection(): After updating multipath set, update the
multipath aggregate attribute
|
|
first stage of the best path calculation. The second stage then
selects a winner from each peer AS's best path. In the second stage we
clear multipath set of the non-selected best paths via
bgp_mp_dmed_deselect(). Since the multipath set is already marked up
for the winning path, we don't call bgp_info_mpath_update() after the
second stage calculation.
* bgpd/bgp_mpath.c
* bgp_mp_dmed_deselect(): New function to cleanup the multipath
markup if a DMED selected path loses in stage 2 of the best path
calculation
* bgpd/bgp_mpath.h
* Add external declaration of bgp_mp_dmed_deselect()
* bgpd/bgp_route.c
* bgp_best_selection(): If multipath is enabled, build up the mp_list
for the current peer AS, and do the RIB markup the best path from
that AS. In the second stage, clear the RIB markup for the DMED
selected path if it is not selected as best. Only call
bgp_info_mpath_update() in the second stage when not doing
deterministic MED.
|
|
routes. Use a growable buffer (bgp_nexthop_buf) to collect nexthops
that are included in the announcement. Use the BGP_INFO_MULTIPATH_CHG
flag to trigger zebra announcement so zebra will be updated if the
multipath set changes. Display all multipath nexthops in
'debug bgp zebra' output.
* bgpd/bgp_main.c
* bgp_exit(): Free bgp_nexthop_buf when exiting
* bgpd/bgp_route.c
* bgp_process_rsclient(): Clear BGP_INFO_MULTIPATH_CHG after processing
* bgp_process_main(): Check BGP_INFO_MULTIPATH_CHG to trigger zebra
announcement and clear aftr processing
* bgpd/bgp_zebra.c
* bgp_nexthop_buf: Growable buffer used to collect nexthops for zebra
announcement
* bgp_zebra_announce(): Grow bgp_nexthop_buf if needed. Include
multipath count in zebra announcement and add all nexthops to
bgp_nexthop_buf. Pass bgp_nexthop_buf data to zebra announcement.
Added nexthops to debug output.
* bgp_zebra_init(): Initialize bgp_nexthop_buf at startup
* bgpd/bgp_zebra.h
* BGP_NEXTHOP_BUF_SIZE: Default initial bgp_nexthop_buf size has room
for 8 nexthops
|
|
information based on the multipath list (mp_list) generated during
the best path calculation. Display "multipath" for paths that are
multipath and also on bestpath if the route is multipath. Flag a
best path with the BGP_INFO_MULTIPATH_CHG if the multipath
set has changed since the last update. This can be used to trigger
updates to zebra and peers.
The multipath markup is a lazily allocated bgp_info_mpath structure
that is added to the best path and any multipaths. The mpath structures
are linked together with the best path element at the head and the
other elements ordered by nexthop and then by peer address. This
markup scheme is updated by calling bgp_info_mpath_update() and passing
in a new mp_list the the current multipath set. There are additional
API's for walking the multipath set, querying the count of multipaths,
and for cleaning up the multipath markup information when freeing path
information.
* bgpd/bgp_mpath.c
* bgp_info_mpath_new(): Allocation of new mpath element
* bgp_info_mpath_free(): Release memory for mpath element
* bgp_info_mpath_get(): Access mpath element of path. Allocate memory
on-demand
* bgp_info_mpath_enqueue(): Enqueue a path onto the multipath list
* bgp_info_mpath_dequeue(): Remove a path from the multipath list
* bgp_info_mpath_first(): Return first path on the multipath list
* bgp_info_mpath_next(): Return next path on the multipath list
* bgp_info_mpath_count(): Return the number of paths on the multipath list
* bgp_info_mpath_count_set(): Set the number of paths on the multipath list
* bgp_info_mpath_update(): Update multipath markup on bgp route table entry
and flag any changes. Emit 'debug bgp event' output on any multipath
change.
* bgpd/bgp_mpath.h
* struct bgp_info_mpath: Information added to a bgp_info path to record
multipath information
* External declarations for new functions in bgp_mpath.c
* bgpd/bgp_route.c
* bgp_info_free(): Free mpath memory when freeing path information
* bgp_info_reap(): Dequeue path from multipath queue before deleting it
* bgp_best_selection(): Calls bgp_info_mpath_update() with latest
mp_list to mark-up rib table entry
* bgp_vty_out_detail(): Add display of multipath flag for a path. Also
display 'multipath' for bestpath if it is a multipath route
* bgpd/bgp_route.h
* struct bgp_info: Add pointer to bgp_info_mpath information
* Add flags to mark a path as multipath (BGP_INFO_MULTIPATH) and
to mark bestpath if multipath information has changed
(BGP_INFO_MULTIPATH_CHG)
* lib/memtypes.c
* Add MTYPE_BGP_MPATH_INFO for allocating memory for bgp_info_mpath
* tests/bgp_mpath_test.c
* Add test case for bgp_info_mpath_update() and supporting functions
|
|
equal to the best path are accumulated onto an ordered list (mp_list)
if maximum-paths is configured. A future commit will add the
multipath markup to the BGP rib table based on the mp_list. Add
unit test for the added mp_list functions.
Deterministic MED is not supported in this commit, it will be
added later.
* bgpd/bgp_aspath.c
* Make aspath_cmp() an external symbol so it can be used in
equivalent paths check
* bgpd/bgp_aspath.h
* Add extern declaration of aspath_cmp()
* bgpd/bgp_mpath.c
* bgp_info_nexthop_cmp(): Compares nexthops of two paths
* bgp_info_mpath_cmp(): Compare function to order multipaths by
nexthop and then by peer address
* bgp_mp_list_init(): Initialize a list with the multipath order function
* bgp_mp_list_clear(): Clear out the mp_list
* bgp_mp_list_add(): Add a multipath to mp_list
* bgpd/bgp_mpath.h
* External declarations for above added functions in bgp_mpath.c
* bgpd/bgp_route.c
* bgp_info_cmp(): Add equivalent paths result (paths_eq). If eBGP
paths are equal down to IGP metric check, flag as equal if peer AS
matches. Similarly for iBGP paths but compare full AS_PATH.
* bgp_best_selection(): If multipath is enabled, accumulate equivalent paths
in mp_list. Add debug bgp event output to see result (will be filtered
later to display only when change occurs)
* bgp_process_rsclient(): Pass multipath config to bgp_best_selection()
* bgp_process_main(): Pass multipath config to bgp_best_selection()
* tests/bgp_mpath_test.c
* Add unit test case for bgp_mp_list functions
|
|
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network
which is HAVE_IPV6, so these should be too.
(bgp_route_init) and the installs should be similarly ifdefed
|
|
Many show commands do not have support for multiple views and do not
treat different address families uniformly. The following changes add
a number of commands with support for views and rationalized treatment
of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and
more recent versions of IOS).
* bgp_route.c: (bgp_show_community) Inserted a new second argument (the
name of the view) and the code to look up that name in the BGP structure.
The NULL argument in the call to bgp_show (indicating the default view)
was replaced by the specified view. The existing calls to
bgp_show_community had a NULL second argument inserted to make clear
that they refer to the default view.
(top level) Added new functions via the DEFUN and/or ALIAS macros (and
the associated command table entries) to add the commands
show bgp ipv4 (unicast|multicast)
show bgp ipv4 (unicast|multicast) A.B.C.D
show bgp ipv4 (unicast|multicast) A.B.C.D/M
show bgp ipv6 (unicast|multicast)
show bgp ipv6 (unicast|multicast) X:X::X:X
show bgp ipv6 (unicast|multicast) X:X::X:X/M
These show either the full BGP table or the specified route or
prefix for the given address family.
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \
(AA:NN|local-AS|no-advertise|no-export){1,4}
For the specified view and address family, these show entries
matching any community or the specified communit(y)(ies).
show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \
(A.B.C.D|X:X::X:X) (advertised-routes|received-routes)
For the specified view and address family, show the routes
advertised to or received from the given BGP neighbor.
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M
For the specifed (optional) view and address family, show either
the full BGP table or the specified route or prefix for the given
route server client peer.
* bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS
macros (and the associated command table entries) to add the commands
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary
For the specified (optional) view and address family, display
either the normal summary table for BGP peers, or the route server
client table showing the import and export policies.
|
|
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its
author does not think it will make progress in IDR. Remove all support
introduced for it, but leave stubs for the commands to avoid breaking
any configurations.
Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
|
|
extcom..'
* Extended communities has some kind of resource allocation problem which
causes a double-free if the 'set extcommunity ...' command is used.
Try fix by properly interning extcommunities.
Also, more generally, make unintern functions take a double pointer
so they can NULL out callers references - a usefully defensive programming
pattern for functions which make refs invalid.
Sadly, this patch doesn't fix the problem entirely - crashes still
occur on session clear.
* bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer
args.
* bgp_community.h: (community_unintern) ditto
* bgp_attr.h: (bgp_attr_intern) ditto
* bgp_aspath.h: (bgp_aspath.h) ditto
* (general) update all callers of above
* bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added
to the attr, and unintern any old one.
(route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used
for the route-map set.
(route_set_ecommunity_*_free) unintern to match, instead of free
(route_set_ecommunity_soo) Do as _rt does and don't just leak
any pre-existing community, add to it (is additive right though?)
|
|
* bgp_route.c: (route_vty_out*) The local prefix, metric and weight values
are all stored as uint32_t. Change the format to %u so that large values
are not displayed as negative integers.
|
|
* bgp_route.c: (bgp_static_update_rsclient) BGP sometimes crashes when
removing route server client because of use after free.
The code to update rsclient created a local static copy of bgp attributes
but neglected to handle the extra information pointer. The extra
information was getting freed by bgp_attr_unintern() and reused later when
the copy was passed to bgp_attr_intern().
The fix is to use the attr_dup function to create a copy of the extra
information, then clean it up.
|
|
* bgp_route.c: (bgp_aggregate_set) make sure to unlock BGP node if failure
|
|
* bgpd: (bgp_aggregate_{set,unset,delete}) This fixes locking and other
issues with aggregate set/unset command
|
|
* bgpd: Connected table locks were being locked but not unlocked, such that
eventually a lock would exceed 2^31 and become negative, thus triggering
an assert later on.
* bgp_main.c: (bgp_exit) delete connected elements along with ifp's.
* bgp_nexthop.c: (bgp_nexthop_lookup{,_ipv6}) add missing unlocks
(bgp_multiaccess_check_v4) ditto
(bgp_connected_{add,delete}) Use a distinct memtype for bgp_connected_ref.
(bgp_scan_finish) reset the nexthop cache to clean it up when bgpd exits
* bgp_route.c: fix missing bgp_node unlocks
* lib/memtype.c: (memory_list_bgp) add MTYPE_BGP_CONN
* testing: has been tested for almost 2 months now.
|
|
|
|
Older versions of Quagga/Zebra would output a value in MRT table
dump files for "uptime" aka "ORIGINATED" that was a WALL clock
value. Given that uptime is now internally a bgp_clock MONOTONIC
value, the output in the MRT files is showing up as monotonic.
Note: time of MRT dump is still recorded correctly as a
time() based value, so we haven't lost that value.
Proposal is to correct the uptime output on the vty and in the
MRT files to again display something more akin to WALL time.
* bgp_dump.c: (bgp_dump_routes_func) add conditional correction
* bgp_route.c: (route_vty_out_detail) make correction conditional, move
variable declaration to beginning of the function
|
|
* bgp_route.c: (bgp_process_queue_init) rsclient wasn't getting all the
same things initialised as the main queue. Simplify to make it more robust.
|
|
* bgp_route.c: (route_vty_out_detail) calculate time value
in a way, which works regardless of monotonic clock
being used or not
|
|
* bgpd/bgp_attr.c, bgpd/bgp_open.h, bgpd/bgp_route.c, lib/prefix.c,
lib/prefix.h: Various integer types were being used where, if we
had strict type checking, afi_t and safi_t would be required.
Signed-off-by: G.Balaji <balajig81@gmail.com>
(cherry picked from commit c8af35ffa2dc79ff7d7ff00b1b61f1f50a100ab6)
|
|
BGP uses time() to get system time of day; but that value
fluctuates with time adjustments from NTP. This can cause premature
flapping of peer sessions and other failures.
Use the system monotonic clock supported by Quagga thread library
to avoid issue.
See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467
* bgpd/bgp_fsm.c
* bgp_uptime_reset(): dismiss function
* bgpd/bgpd.c
* bgp_clock(): new function
* bgpd/bgp_damp.c
* bgp_reuse_timer(): employ bgp_clock() instead of time(NULL)
* bgp_damp_withdraw(): idem
* bgp_damp_update(): idem
* bgp_damp_scan(): idem
* bgp_damp_info_vty(): idem
* bgp_damp_reuse_time_vty(): idem
* bgpd/bgp_fsm.c
* bgp_routeadv_timer(): idem
* bgp_stop(): idem
* bgp_establish(): idem
* bgpd/bgp_packet.c
* bgp_update_receive(): idem
* bgpd/bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
* bgp_static_update_rsclient(): idem
* bgp_static_update_main(): idem
* bgp_static_update_vpnv4(): idem
* bgp_aggregate_route(): idem
* bgp_aggregate_add(): idem
* bgp_redistribute_add(): idem
* bgpd/bgp_snmp.c
* bgpPeerTable(): idem
* bgpTrapEstablished(): idem
* bgpTrapBackwardTransition(): idem
* bgpd/bgpd.c
* peer_create(): idem
* peer_uptime(): idem
* bgp_master_init(): idem
|
|
* bgpd/bgp_fsm.c
* bgp_clearing_completed(): only used in one file, can be static
* bgpd/bgp_packet.c
* afi2str(): sayonara
* safi2str(): sayonara
* bgpd/bgp_route.c
* bgp_distance_reset(): sayonara
* bgpd/bgp_zebra.c
* bgp_ifindex_by_nexthop(): sayonara
|
|
* bgp_route.c: (bgp_update_main) Nexthop reachability should be checked for
confederations too in case a prefix is received from more than one
confederation peers.
|
|
|
|
* bgp_route.c: (bgp_clear_node_queue_init) fix buffer
overrun.
|
|
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
|
