| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* bgpd.h: Add error code for setting GTSM on iBGP
* bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal
incompatibility of GTSM+iBGP to vty.
Consider the session state when setting GTSM, and reset Open/Active peers
to let them pick up new TTL from start.
|
|
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup.
({no_,}neighbor_ttl_security) ditto.
* bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only
need to be done on transition.
* sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
|
|
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used
to verify that incoming packets have been sent from neighbours no more
than X IP hops away. In other words, this allows packets that were sent from
further away (i.e. not by the neighbour with known distance, and so possibly
a miscreant) to be filtered out.
* lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL
using the IP_MINTTL socket opt.
* bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command
error for minttl.
(struct peer) add a config variable, to store the configured minttl.
(peer_ttl_security_hops_{set,unset}) configuration handlers
* bgpd.c: (peer_group_get) init gtsm_hops
(peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and
GTSM can't both be active for a peer at the same time.
(peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with
ebgp_multihop.
(bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X".
* bgp_vty.c: (bgp_vty_return) message for
BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK
(peer_ebgp_multihop_{un,}set_vty)
* bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate.
(bgp_connect) ditto for outbound.
|
|
Many show commands do not have support for multiple views and do not
treat different address families uniformly. The following changes add
a number of commands with support for views and rationalized treatment
of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and
more recent versions of IOS).
* bgp_route.c: (bgp_show_community) Inserted a new second argument (the
name of the view) and the code to look up that name in the BGP structure.
The NULL argument in the call to bgp_show (indicating the default view)
was replaced by the specified view. The existing calls to
bgp_show_community had a NULL second argument inserted to make clear
that they refer to the default view.
(top level) Added new functions via the DEFUN and/or ALIAS macros (and
the associated command table entries) to add the commands
show bgp ipv4 (unicast|multicast)
show bgp ipv4 (unicast|multicast) A.B.C.D
show bgp ipv4 (unicast|multicast) A.B.C.D/M
show bgp ipv6 (unicast|multicast)
show bgp ipv6 (unicast|multicast) X:X::X:X
show bgp ipv6 (unicast|multicast) X:X::X:X/M
These show either the full BGP table or the specified route or
prefix for the given address family.
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \
(AA:NN|local-AS|no-advertise|no-export){1,4}
For the specified view and address family, these show entries
matching any community or the specified communit(y)(ies).
show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \
(A.B.C.D|X:X::X:X) (advertised-routes|received-routes)
For the specified view and address family, show the routes
advertised to or received from the given BGP neighbor.
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M
For the specifed (optional) view and address family, show either
the full BGP table or the specified route or prefix for the given
route server client peer.
* bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS
macros (and the associated command table entries) to add the commands
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary
For the specified (optional) view and address family, display
either the normal summary table for BGP peers, or the route server
client table showing the import and export policies.
|
|
* bgp_vty.c: (community_list_perror, show_ip_community_list_arg,
show_ip_extcommunity_list_arg) fix spelling
|
|
* bgp_vty.c: (BGP_UPDATE_SOURCE_STR) Restore ability to accept arbitrary
interface names for the 'neighbor ... update-source' command - shouldn't
have been deleted.
(BGP_UPDATE_SOURCE_STR) Add help for same.
|
|
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
|
|
* bgp_vty.c: BGP_UPDATE_SOURCE_STR define should only specify IP addresses,
the underlying mechanisms won't do anything useful with interface names.
Fix bug #527.
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
|
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was
getting hit under certain 4-byte ASN conditions. New realloc strategy.
* bgpd/bgp_aspath.c: (aspath_key_make) const warning fix.
"%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is
above 2^31.
|
|
* bgp_vty.c: (show_bgp_views_cmd) new command to list all defined
views.
(with small edits by Paul Jakma)
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
accepted conns"
Revert commit d664ae1182c29b74b409bc8594b7bd0575e91ce9. An experimental
patch which violates RFC4271 quite badly, but managed to accidently sneak
its way in.
|
|
* lib/command.h: Add a RESTRICTED_NODE, intended for use with
anonymous, 'no login' vtys, to provide a subset of 'view' mode
commands.
* lib/command.c: Add RESTRICTED_NODE bits, nothing special, just
following VIEW_NODE.
* lib/vty.c: (vty_auth) enable authentication should fall back to
restricted/view node as appropriate.
(vty_create) init vty's to restricted/view node as appropriate,
for the 'no login' case.
(vty_{no_,}restricted_mode_cmd) config commands to enable
'anonymous restricted' in vty configuration.
(vty_config_write) 'anonymous restricted' config.
(vty_init) Install some commands to restricted mode, and the
'anonymous restricted' config commands into VTY_NODE.
* bgpd/*.c: Install some of the safe(r) BGP commands into
'restricted mode', i.e. lookup commands of non-sensitive data.
Useful with looking-glass route-servers.
|
|
2007-08-31 Paul Jakma <paul.jakma@sun.com>
* (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN
on accepted connections, i.e. to not wait till after
collision-detect to send OPEN, which appears to be allowed in
RFC4271. This may help speed up establishing sessions, or help
avoid FSM problems with sessions to certain peers. Not enabled by
default though.
|
|
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_open_receive) fix warning in a zlog call
* bgp_vty.c: (bgp_vty_return) add return code
* bgpd.c: (bgp_master_init) setup the socket list.
* bgp_network.c: Remove the dual IPv4/6 socket thing for now, which
was implemented by Michael, until such time as its clear its
required for Linux (see sockopt comments). IPv6 support, including
IPv4 sessions on AF_INET6 sockets, therefore is broken, and the
'-l 0.0.0.0' arguments would need to be given to bgpd to make
things work here.
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Tomohiko Kusuda <kusuda@inetcore.com>
Leigh Brown <leigh@solinno.co.uk>
* bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5
sockopt and bgpd.
(bgp_md5_set_socket) Helper for bgp_connect
(bgp_md5_set) setup TCP-MD5SIG for the given peer.
(bgp_connect) call out to bgp_md5_set_socket for the outgoing
connect socket.
(bgp_socket) save references to the listen sockets, needed if
TCP-MD5SIG is applied later or changed.
* bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password'
commands.
* bgpd.c: (peer_{new,delete) manage TCP-MD5 password
(peer_group2peer_config_copy) inherit TCP-MD5 password
(peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5
passwords: applying checks, stopping peers, and trying to return
errors to UI, etc.
(bgp_config_write_peer) save password.
Fix missing newline in writeout of neighbor ... port.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: ifdef out various places that converted
v4mapped sockets to pure v4. Doesn't seem necessary at all,
presumably a workaround for now historical inet_ntop bugs (?)
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
|
|
2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* *.c: CMD_AS_RANGE was being used inside command strings, and thus
not being expanded, fix by dequoting.
|
|
2008-07-02 Stephen Hemminger <stephen.hemminger@vyatta.com>
* bgp_table.{c,h}: (bgp_table_finish) Take a double pointer and
scrub pointer in caller, so fixing double-free crashes seen
with route-server-client configuration.
* *.c: Adjust all callers of bgp_table_finish
2008-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_table.{c,h}: (bgp_node_delete, bgp_table_free) shouldn't be
exported.
|
|
2007-10-14 Paul Jakma <paul.jakma@sun.com>
* NEWS: Note that MRT dumps are now version 2
* (general) Merge in Juergen Kammer's AS4 patch.
2007-09-27 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_normalise) remove duplicates from
from sets.
(aspath_reconcile_as4) disregard a broken part of the RFC around
error handling in path reconciliation.
* aspath_test.c: Test dupe-weeding from sets.
Test that reconciliation merges AS_PATH and AS4_PATH where
former is shorter than latter.
2007-09-26 Paul Jakma <paul.jakma@sun.com>
* aspath_test.c: Test AS4_PATH reconcilation where length
of AS_PATH and AS4_PATH is same.
2007-09-25 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (peek_for_as4_capability) Fix to work.
* bgp_packet.c: (bgp_open_receive) Fix sanity check of as4.
* tests/bgp_capability_test.c: (general) Extend tests to validate
peek_for_as4_capability.
Add test of full OPEN Option block, with multiple capabilities,
both as a series of Option, and a single option.
Add some crap to beginning of stream, to prevent code depending
on getp == 0.
2007-09-18 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (bgp_capability_as4) debug printf inline with others.
(peek_for_as4_capability) There's no need to signal failure, as
failure is better dealt with through full capability parser -
just return the AS4, simpler.
* bgp_packet.c: (bgp_open_receive) Update to match
peek_for_as4_capability change.
Allow use of BGP_AS_TRANS by 2b speakers.
Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors.
(bgp_capability_msg_parse) missing argument to debug print
(bgp_capability_receive) missing return values.
* tests/bgp_capability_test.c: (parse_test) update for changes to
peek_for_as4_capability
2007-07-25 Paul Jakma <paul.jakma@sun.com>
* Remove 2-byte size macros, just make existing macros take
argument to indicate which size to use.
Adjust all users - typically they want '1'.
* bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any
as4's in a path.
(aspath_put) Return the number of bytes actually written, to
fix the bug Juergen noted: Splitting of segments will change
the number of bytes written from that already written to the
AS_PATH header.
(aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP
is still defined as 2b.
(aspath_aggregate) fix latent bug.
(aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation
function.
(aspath_key_make) Hash the AS_PATH string, rather than
just taking the addition of assegment ASes as the hash value,
hopefully sligthly more collision resistant.
(bgp_attr_munge_as4_attrs) Collide the NEW_ attributes
together with the OLD 2-byte forms, code Juergen
had in bgp_attr_parse but re-organised a bit.
(bgp_attr_parse) Bunch of code from Juergen moves
to previous function.
(bgp_packet_attribute) Compact significantly by
just /always/ using extended-length attr header.
Fix bug Juergen noted, by using aspath_put's
(new) returned size value for the attr header rather
than the (guesstimate) of aspath_size() - the two could
differ when aspath_put had to split large segments, unlikely
this bug was ever hit in the 'wild'.
(bgp_dump_routes_attr) Always use extended-len and
use aspath_put return for header length. Output 4b ASN
for AS_PATH and AGGREGATOR.
* bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix
hash callback declarations to match prototypes.
(ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4,
complete rewrite of Juergen's changes (no asdot support)
* bgp_open.c: (bgp_capability_as4) New, does what it says
on the tin.
(peek_for_as4_capability) Rewritten to use streams and
bgp_capability_as4.
* bgp_packet.c: (bgp_open_send) minor edit
checked (in the abstract at least) with Juergen.
Changes are to be more accepting, e.g, allow AS_TRANS on
a 2-byte session.
* (general) Update all commands to use CMD_AS_RANGE.
* bgp_vty.c: (bgp_clear) Fix return vals to use CMD_..
Remove stuff replicated by VTY_GET_LONG
(bgp_clear_vty) Return bgp_clear directly to vty.
* tests/aspath_test.c: Exercise 32bit parsing. Test reconcile
function.
* tests/ecommunity_test.c: New, test AS4 ecommunity changes,
positive test only at this time, error cases not tested yet.
2007-07-25 Juergen Kammer <j.kammer@eurodata.de>
* (general) AS4 support.
* bgpd.h: as_t changes to 4-bytes.
* bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines.
* bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE
added for 2-byte.
Add AS16 versions of length calc macros.
(aspath_count_numas) New, count number of ASes.
(aspath_has_as4) New, return 1 if there are any as4's in a
path.
(assegments_parse) Interpret assegment as 4 or 2 byte,
according to how the caller instructs us, with a new
argument.
(aspath_parse) Add use32bit argument to pass to
assegments_parse. Adjust all its callers to pass 1, unless
otherwise noted.
(assegment_data_put) Adjust to be able to write 2 or 4 byte
AS, according to new use32bit argument.
(aspath_put) Adjust to write 2 or 4.
(aspath_gettoken) Use a long for passed in asno.
* bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and
BGP_ATTR_AS4_AGGREGATOR.
(bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as
determined by received-capability flag.
(bgp_attr_aspath_check) New, code previously in attr_aspath
but moved to new func so it can be run after NEW_AS_PATH
reconciliation.
(bgp_attr_as4_path) New, handle NEW_AS_PATH.
(bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes.
(bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR.
(bgp_attr_parse) Add handoffs to previous parsers for the two
new AS4 NEW_ attributes.
Various checks added for NEW/OLD reconciliation.
(bgp_packet_attribute) Support 2/4 for AS_PATH and
AGGREGATOR, detect when NEW_ attrs need to be sent.
* bgp_debug.{c,h}: Add 'debug bgp as4'.
* bgp_dump.c: MRTv2 support, unconditionally enabled, which
supports AS4. Based on patches from Erik (RIPE?).
* bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4
support.
* bgp_open.c: (peek_for_as4_capability) New, peek for AS4
capability prior to full capability parsing, so we know which
ASN to use for struct peer lookup.
(bgp_open_capability) Always send AS4 capability.
* bgp_packet.c: (bgp_open_send) AS4 handling for AS field
(bgp_open_receive) Peek for AS4 capability first, and figure
out which AS to believe.
* bgp_vty.c: (bgp_show_peer) Print AS4 cap
* tests/aspath_test.c: Support asn32 changes, call aspath_parse
with 16 bit.
* vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER
* vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER
* vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
|
|
2007-07-26 Paul Jakma <paul.jakma@sun.com>
* (general) Clean up and compact capability parsing slightly.
Consolidate validation of length and logging of generic TLV, and
memcpy of capability data, thus removing such from cap specifc
code (not always present or correct).
* bgp_open.h: Add structures for the generic capability TLV header
and for the data formats of the various specific capabilities we
support. Hence remove the badly named, or else misdefined, struct
capability.
* bgp_open.c: (bgp_capability_vty_out) Use struct capability_mp_data.
Do the length checks *before* memcpy()'ing based on that length
(stored capability - should have been validated anyway on input,
but..).
(bgp_afi_safi_valid_indices) new function to validate (afi,safi)
which is about to be used as index into arrays, consolidates
several instances of same, at least one of which appeared to be
incomplete..
(bgp_capability_mp) Much condensed.
(bgp_capability_orf_entry) New, process one ORF entry
(bgp_capability_orf) Condensed. Fixed to process all ORF entries.
(bgp_capability_restart) Condensed, and fixed to use a
cap-specific type, rather than abusing capability_mp.
(struct message capcode_str) added to aid generic logging.
(size_t cap_minsizes[]) added to aid generic validation of
capability length field.
(bgp_capability_parse) Generic logging and validation of TLV
consolidated here. Code compacted as much as possible.
* bgp_packet.c: (bgp_open_receive) Capability parsers now use
streams, so no more need here to manually fudge the input stream
getp.
(bgp_capability_msg_parse) use struct capability_mp_data. Validate
lengths /before/ memcpy. Use bgp_afi_safi_valid_indices.
(bgp_capability_receive) Exported for use by test harness.
* bgp_vty.c: (bgp_show_summary) fix conversion warning
(bgp_show_peer) ditto
* bgp_debug.h: Fix storage 'extern' after type 'const'.
* lib/log.c: (mes_lookup) warning about code not being in
same-number array slot should be debug, not warning. E.g. BGP
has several discontigious number spaces, allocating from
different parts of a space is not uncommon (e.g. IANA
assigned versus vendor-assigned code points in some number
space).
|
|
2007-05-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: (struct info) Move less frequently used
fields to a lazily allocated struct info_extra.
Export bgp_info_extra_get
* bgp_route.c: (bgp_info_extra_new) allocate extra
(bgp_info_extra_free) Free damp info and the info_extra.
(bgp_info_extra_get) Retrieve the info_extra of a struct
info, allocating as required.
(generally) adjust to use info->extra
* bgp_damp.c: (generally) use bgp_info_extra_get to access
dampinfo
* bgp_attr.h: Move rarely allocated attributes from struct attr
to a struct attr_extra, for a substantial saving in size of
struct attr.
* bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory.
(bgp_attr_extra_get) Get the attr_extra for a given struct
attr, allocating it if needs be.
(bgp_attr_dup) Shallow copy the struct attr and its attr_extra.
(generally) adjust to know about attr->extra.
* bgp_debug.c: (bgp_dump_attr) ditto
* bgp_vty.c: (show_bgp_memory) print attr and info extra sizes.
* bgp_nexthop.c: (generally) adjust to know about attr->extra
and info->extra.
* bgp_{packet,routemap,snmp,zebra}.c: ditto
* lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion
to make it clear it takes both address and ifname.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* bgpd/bgp_vty.c: Add includes to get several structs we want
to provide usage statistics on.
(show_bgp_memory_cmd) Show memory usage stats for various
notable fixed size objects. Using mtype_stats_alloc and
mtype_memstr recently added to memory.c.
(bgp_show_summary) Report some additional stats specific to
the given BGP instance and/or AFI/SAFI such as table counts,
peers, rsclients and peer-groups.
(bgp_vty_init) Install show_bgp_memory_cmd.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description
to state of peer while it's suppressed due to clearing.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* bgp_vty.c: (bgp_vty_init) gcc 4 compile fix. static
function declarations shouldn't be inside functions.
* bgp_dump.c: (bgp_dump_interval_add) ditto.
|
|
* bgp_vty.c: (general) Add support for BGP IPv6 Multicast SAFI
commands and BGP_IPV6M_NODE.
|
|
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
|
|
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us
add work_queues for bgp_process.
* bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount.
Add bgp_info_{lock,unlock} helper functions.
Add bgp_info_{add,delete} helpers, to remove need for
users managing locking/freeing of bgp_info and bgp_node's.
* bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and
BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of
nodes.
* bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock
peer reference as appropriate.
* bgpd/bgp_damp.c: Remove its internal prototypes for
bgp_info_delete/free. Just use bgp_info_delete.
* bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers.
(struct peer) Add reference count 'lock'
(peer_lock,peer_unlock) New helpers to take/release reference
on struct peer.
* bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting
and balance how references are taken and released.
(bgp_advertise_free) release bgp_info reference, if appropriate
(bgp_adj_out_free) unlock peer
(bgp_advertise_clean) leave the adv references alone, or else
call bgp_advertise_free cant unlock them.
(bgp_adj_out_set) lock the peer on new adj's, leave the reference
alone otherwise. lock the new bgp_info reference.
(bgp_adj_in_set) lock the peer reference
(bgp_adj_in_remove) and unlock it here
(bgp_sync_delete) make hash_free on peer conditional, just in
case.
* bgpd/bgp_fsm.c: (general) document that the timers depend on
bgp_event to release a peer reference.
(bgp_fsm_change_status) moved up the file, unchanged.
(bgp_stop) Decrement peer lock as many times as cancel_event
canceled - shouldnt be needed but just in case.
stream_fifo_clean of obuf made conditional, just in case.
(bgp_event) always unlock the peer, regardless of return value
of bgp_fsm_change_status.
* bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's.
(bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs
along with a comment on it.
* bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup
some of the resource management around bgp_info. Refcount peer.
Add workqueues for bgp_process and clear_table.
(bgp_info_new) make static
(bgp_info_free) Ditto, and unlock the peer reference.
(bgp_info_lock,bgp_info_unlock) new exported functions
(bgp_info_add) Add a bgp_info to a bgp_node in correct fashion,
taking care of reference counts.
(bgp_info_delete) do the opposite of bgp_info_add.
(bgp_process_rsclient) Converted into a work_queue work function.
(bgp_process_main) ditto.
(bgp_processq_del) process work queue item deconstructor
(bgp_process_queue_init) process work queue init
(bgp_process) call init function if required, set up queue item
and add to queue, rather than calling process functions directly.
(bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts
(bgp_rib_withdraw) ditto
(bgp_update_rsclient) let bgp_info_add manage refcounts
(bgp_update_main) ditto
(bgp_clear_route_node) clear_node_queue work function, does
per-node aspects of what bgp_clear_route_table did previously
(bgp_clear_node_queue_del) clear_node_queue item delete function
(bgp_clear_node_complete) clear_node_queue completion function,
it unplugs the process queues, which have to be blocked while
clear_node_queue is being processed to prevent a race.
(bgp_clear_node_queue_init) init function for clear_node_queue
work queues
(bgp_clear_route_table) Sets up items onto a workqueue now, rather
than clearing each node directly. Plugs both process queues to
avoid potential race.
(bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage
bgp_info refcounts.
(bgp_static_update_rsclient) ditto
(bgp_static_update_main) ditto
(bgp_static_update_vpnv4) ditto, remove unneeded cast.
(bgp_static_withdraw) see bgp_static_withdraw_rsclient
(bgp_static_withdraw_vpnv4) ditto
(bgp_aggregate_{route,add,delete}) ditto
(bgp_redistribute_{add,delete,withdraw}) ditto
* bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer
reference
(peer_rsclient_unset_vty) ditto, but unlock same reference
* bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime
of struct peer.
(peer_lock,peer_unlock) peer refcount helpers
(peer_new) add initial refcounts
(peer_create,peer_create_accept) lock peer as appropriate
(peer_delete) unlock as appropriate, move out some free's to
peer_free.
(peer_group_bind,peer_group_unbind) peer refcounting as
appropriate.
(bgp_create) check CALLOC return value.
(bgp_terminate) free workqueues too.
* lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and
MTYPE_BGP_CLEAR_NODE_QUEUE
|
|
family node.
[backport candidate]
|
|
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
transparent-nexthop" commands.
[merge from GNU Zebra]
|
|
community-list cleanup.
[merge from GNU Zebra]
|
|
-> "disable-connected-check".
[merge from GNU Zebra]
|
|
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
|
|
capability route-refresh" commands. Route refresh capability is sent
anyway now. Preserve dummy deprecated commands.
[merge from GNU Zebra]
|
|
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor
version" command as deprecated.
[merge from GNU Zebra]
|
|
maximum-prefix limit" feature support.
[merge from GNU Zebra]
|
|
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
|
|
* buffer.h: Fix comment on buffer_getstr to reflect that it now
uses XMALLOC.
* buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc.
* filter.c: (access_list_remark,ipv6_access_list_remark) Use
argv_concat instead of buffer_getstr.
* if.c: (interface_desc) Use argv_concat instead of buffer_getstr.
* plist.c: (ip_prefix_list_description,ipv6_prefix_list_description)
Use argv_concat instead of buffer_getstr.
* bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead
of buffer_getstr.
* bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string
returned by buffer_getstr.
(bgp_show_community) Must use XFREE instead of free on string
returned by buffer_getstr.
* bgp_routemap.c: (set_community) Must use XFREE instead of free
on string returned by buffer_getstr.
* bgp_vty.c: (neighbor_description) Use argv_concat instead of
buffer_getstr.
|
|
* (global) more const'ification and fixups of types to clean up code.
* bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect,
should use something like the VTY_GET_INTEGER macro, but without
the vty_out bits..
* bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE
(no_set_aggregator_as) ditto.
* bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is
returned, add comments about troublesome return value.
|
|
|
|
|
|
(at Technical University of Madrid as part of Euro6ix Project)
Enhanced Route Server functionality and Route-Maps:
* bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to
support rs-clients. A 'struct bgp_table *rib' has been added to the
first (to mantain a separated RIB for each rs-client) and two new
route-maps have been added to the last (for import/export policies).
Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX},
PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT.
* bgpd/bgpd.c: Modified the functions that create/delete/etc peers in
order to consider the new fields included in 'struct peer' for
supporting rs-clients, i.e. the import/export route-maps and the
'struct bgp_table'.
* bgpd/bgp_route.{ch}: Modified several functions related with
receiving/sending announces in order to support the new Route Server
capabilities.
Function 'bgp_process' has been reorganized, creating an auxiliar
function for best path selection ('bgp_best_selection').
Modified 'bgp_show' and 'bgp_show_route' for displaying information
about any RIB (and not only the main bgp RIB).
Added commands for displaying information about RS-clients RIBs:
'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient
(A.B.C.D|X:X::X:X) X:X::X:X/M', etc
* bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two
new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT})
and 'void *owner' which points to 'struct bgp' or 'struct peer' which
owns the table.
When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set.
* bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and
'no neighbor ... route-server-client' now not only set/unset the flag
PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct
bgp_table' of the peer. Special actions are taken for peer_groups.
Command 'neighbor ... route-map WORD (in|out)' now also supports two
new kinds of route-map: 'import' and 'export'.
Added commands 'clear bgp * rsclient', etc. These commands allow a new
kind of soft_reconfig which affects only the RIB of the specified
RS-client.
Added commands 'show bgp rsclient summary', etc which display a
summary of the rs-clients configured for the corresponding address
family.
* bgpd/bgp_routemap.c: A new match statement is available,
'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in
import/export route-maps, and it matches when the peer who announces
(when used in an import route-map) or is going to receive (when used
in an export route-map) the route is the same than the one specified
in the statement.
For peer-groups the statement matches if the specified peer is member
of the peer-group.
A special version of the command, 'match peer local', matches with
routes originated by the Route Server (defined with 'network ...',
redistributed routes and default-originate).
* lib/routemap.{ch}: Added a new clause 'call NAME' for use in
route-maps. It jumps into the specified route-map and when it returns
the first route-map ends if the called RM returns DENY_MATCH, or
continues in other case.
|
|
repository by Rivo Nurges.
|
