| Age | Commit message (Collapse) | Author |
|---|
|
This patch resolves the significance of order of group and password
statements.
It prevents passwords from being lost in cases where all
three conditions apply:
1. the peer is member of a group with or without group password
2. the peer has an individual password set
3. the peer is added to a group within an address-family ipv6
section
In addition this patch prevents the same issue in cases, where an IPv4
peer's password is set first and the peer is added to a group
afterwards.
Adding a peer to a group cancels his individual password. Without ipv6
this is not a problem, because choosing the right order of config
statements will do (set password only after adding peer to group).
When adding the peer to a group within the address-family
section, his password is definitely lost. The same workaround (ie.
setting the password after the address-family section) can not be used,
because "show run" will print the configuration statements in the wrong
order.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
If a neighbor was in a peer group for any AFI/SAFI, bgpd would never write a
"no neighbor activate" line for IPv4 unicast, so a valid setup like following
could be configured, but not saved:
router bgp 64600
bgp router-id 198.51.100.1
network 198.51.100.0/24
neighbor peers peer-group
neighbor 2001:db8::2 remote-as 64601
no neighbor 2001:db8::2 activate
!
address-family ipv6
network 2001:db8:1::/48
neighbor peers activate
neighbor peers soft-reconfiguration inbound
neighbor 2001:db8::2 peer-group peers
exit-address-family
!
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Added replace-as modifier for BGP neighbors when using
local-as. If the replace-as modifier is specified, only the
replacement AS as specified by the local-as modifier is
prepended to the AS_PATH, not the process's AS.
In bgp_attr.c, I decided that
if (peer->change_local_as) {
/* If replace-as is specified, we only use the change_local_as when
advertising routes. */
if( ! CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) {
aspath = aspath_add_seq (aspath, peer->local_as);
}
aspath = aspath_add_seq (aspath, peer->change_local_as);
} else {
aspath = aspath_add_seq (aspath, peer->local_as);
}
was clearer than the alternative that didn't duplicate the prepending of the
process's AS:
/* First, append the process local AS unless we have an alternate local_as
* and we're replacing it (as opposed to just prepending it). */
if (! (peer->change_local_as
&& CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) ) {
aspath = aspath_add_seq (aspath, peer->local_as);
}
if (peer->change_local_as)
aspath = aspath_add_seq (aspath, peer->change_local_as);
}
But I could be convinced otherwise.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* bgpd.h: add a BGP_OPT_NO_LISTEN option for the master BGP configuration,
to prevent any listen socket being created automatically. Allows code
to be used outside of BGP daemon settings.
* bgpd.c: (bgp_get) honour above the flag, suppress auto-creation of listen
socket on first BGP instance if set.
(bgp_option_set) whitelist BGP_OPT_NO_LISTEN
|
|
This reverts commit 7621f336e2f346edee43227f0b1ef93fe769720b. See bug #727
|
|
peer_sort() it's called so much as to be annoying. In the assumption
that the 'sort' of the peer doesn't change during an established session,
I have changed all calls to peer_sort() in the 'fast-path' to only check
the 'sort'. All the calls from the vty and such still recalculate the sort
and store it in the peer.
There's a lot of other calls to peer_sort() that could be changed but some
maube tricky, someone more knowledgeable may try to reduce them.
This hits peer_sort() from 5th out of the stadium^H^H list on a full
internet table loading profiling session.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This function scores 2nd, profiling a full internet table load. It's called
for every prefix received.
Instead of looping in the interface lists comparing addresses use a hash
to mantain them.
* bgpd.c: Init the own address hash.
* bgp_nexthop.c: Introduce methods to maintain an own address hash.
(bgp_connected_add) add addresses to the hash.
(bgp_connected_delete) delete addresses from the hash.
(bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t
parameter.
* bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to
not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* Separate out BGP socket initialisation from bgp_get, and make it an
explicit function. Allows unit tests to work again and probably also
benefits dry-run.
* bgpd.c: (bgp_get) move socket init out...
(bgp_socket_init) to here
* bgp_main.c: and call it after dry-run.
* bgpd.h: (bgp_socket_init) add prototype
|
|
Conflicts:
bgpd/bgp_route.c
|
|
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
|
|
|
|
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use
that was never fully implemented, so it is deprecated by this
document.
* zebra.h: rename macro
* bgp_fsm.c: (bgp_graceful_restart_timer_expire,
bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update
* bgpd.c: (peer_nsf_stop): update
* bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case
any more
|
|
There is support to configure this for each (AFI,SAFI), but
currently this configuration is only present for IPv4 unicast:
maximum-paths [ibgp] <1-255>
no maximum-paths [ibgp] [<1-255>]
* bgpd/Makefile.am
* Add bgp_mpath.h and bgp_mpath.c to build
* bgpd/bgp_mpath.h
* New file for bgp multipath declarations
* define BGP_DEFAULT_MAXPATHS
* bgpd/bgp_mpath.c
* bgp_maximum_paths_set(): Configure maximum paths for the given
afi, safi and bgp instance
* bgp_maximum_paths_unset(): Return maximum paths configuration to
the default setting for the given afi, safi and bgp instance
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgp_config_write_maxpaths(): Outputs configuration for the given
afi, safi and bgp instance
* Install command elements for IPv4 unicast
* bgpd/bgp_zebra.h
* bgp_config_write_maxpaths(): External declaration
* bgpd/bgpd.c
* bgp_create(): Initialize bgp instance to default maximum paths setting
* bgp_config_write_family(): Output maximum paths configuration
for the given address family
* bgp_config_write(): Output maximum paths configuration for
IPv4 unicast address family
* bgpd/bgpd.h
* struct bgp: Add storage for maximum paths configuration for
each afi, safi
|
|
* bgpd.h: Add error code for setting GTSM on iBGP
* bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal
incompatibility of GTSM+iBGP to vty.
Consider the session state when setting GTSM, and reset Open/Active peers
to let them pick up new TTL from start.
|
|
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup.
({no_,}neighbor_ttl_security) ditto.
* bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only
need to be done on transition.
* sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
|
|
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used
to verify that incoming packets have been sent from neighbours no more
than X IP hops away. In other words, this allows packets that were sent from
further away (i.e. not by the neighbour with known distance, and so possibly
a miscreant) to be filtered out.
* lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL
using the IP_MINTTL socket opt.
* bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command
error for minttl.
(struct peer) add a config variable, to store the configured minttl.
(peer_ttl_security_hops_{set,unset}) configuration handlers
* bgpd.c: (peer_group_get) init gtsm_hops
(peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and
GTSM can't both be active for a peer at the same time.
(peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with
ebgp_multihop.
(bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X".
* bgp_vty.c: (bgp_vty_return) message for
BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK
(peer_ebgp_multihop_{un,}set_vty)
* bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate.
(bgp_connect) ditto for outbound.
|
|
BGP uses time() to get system time of day; but that value
fluctuates with time adjustments from NTP. This can cause premature
flapping of peer sessions and other failures.
Use the system monotonic clock supported by Quagga thread library
to avoid issue.
See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467
* bgpd/bgp_fsm.c
* bgp_uptime_reset(): dismiss function
* bgpd/bgpd.c
* bgp_clock(): new function
* bgpd/bgp_damp.c
* bgp_reuse_timer(): employ bgp_clock() instead of time(NULL)
* bgp_damp_withdraw(): idem
* bgp_damp_update(): idem
* bgp_damp_scan(): idem
* bgp_damp_info_vty(): idem
* bgp_damp_reuse_time_vty(): idem
* bgpd/bgp_fsm.c
* bgp_routeadv_timer(): idem
* bgp_stop(): idem
* bgp_establish(): idem
* bgpd/bgp_packet.c
* bgp_update_receive(): idem
* bgpd/bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
* bgp_static_update_rsclient(): idem
* bgp_static_update_main(): idem
* bgp_static_update_vpnv4(): idem
* bgp_aggregate_route(): idem
* bgp_aggregate_add(): idem
* bgp_redistribute_add(): idem
* bgpd/bgp_snmp.c
* bgpPeerTable(): idem
* bgpTrapEstablished(): idem
* bgpTrapBackwardTransition(): idem
* bgpd/bgpd.c
* peer_create(): idem
* peer_uptime(): idem
* bgp_master_init(): idem
|
|
* bgpd/bgp_aspath.c
* ashash: only used in one file, make static
* aspath_count_numas(): dead code, sayonara
* bgpd/bgpd.c
* peer_nsf_stop(): only used in one file, make static
* bgpd/bgp_packet.h
* bgp_capability_receive(): add missing prototype for a
global function
|
|
* bgpd.c: (peer_lookup_with_open) Bodged application of previous patch
meant the second loop around bgp->peer wasn't included in the loop
around bm->bgp as it was supposed to be. Fix..
|
|
|
|
|
|
* bgpd.c: (peer_lookup) Search through all BGP instances for matches, not just
the default instance, if no specific instance is given.
(peer_lookup_with_open) same.
|
|
Start BGP listener only after first instance is started. This helps the
security if BGP is not used but daemon is started. It also addresses some
issues like MD5 not working on listener unless IPV6 configured (because
listener was not in list); as well as compiler warnings.
* bgp_network.c: (bgp_listener) listen socket creation consolidated here
(bgp_socket) Use bgp_listener
* bgpd.c: (bgp_get) call bgp_socket on creation of first struct bgp.
(bgp_init) remove bgp_socket call.
* memtypes.c: Add MTYPE_BGP_LISTENER
|
|
bgpd.c: (various tables) only used in one place and are immutable.
|
|
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
|
|
* bgpd.c: Removal of (struct bgp *) from the master list was being left to
bgp_free time. This meant there was a window of time between bgp_delete
and refcounts hitting 0 (e.g. routes to be processed) where bgp_lookup's
could return a deleted (struct bgp *).
(bgp_delete) This is the logical place where a (struct bgp *) should lose
its visibility, so move the deletion from the bgp-master list to here,
from bgp_free.
Many thanks to Fritz Reichmann for his thorough debugging of the problem
and testing of fixes and Chris Caputo for his further analysis.
|
|
When a BGP instance is deleted with lots of routes and neighbors
it is possible for the peer rsclient queue to run after
bgp_delete has been called. This would lead to bgpd crashing,
see https://bugzilla.vyatta.com/show_bug.cgi?id=3436
The fix is to add reference counting to the BGP instance and defer
actual freeing until all references are gone.
This patch also fixes a memory leak where the self-reference
peer instance was being created but never freed.
The check in bgp_clear_route is no longer valid because it is possible
for it to be called when peer is in Deleted state during cleanup.
|
|
Use Ansi-C prototypes rather than old K&R method of declaring
function without arguments
|
|
* lib/workqueue.c: free-ing workqueues had never been tested obviously,
queue's thread was not being stopped
* bgpd/bgpd.c: null out freed workqueues, to prevent acting on freed
workqueues
|
|
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was
getting hit under certain 4-byte ASN conditions. New realloc strategy.
* bgpd/bgp_aspath.c: (aspath_key_make) const warning fix.
"%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is
above 2^31.
|
|
accepted conns"
Revert commit d664ae1182c29b74b409bc8594b7bd0575e91ce9. An experimental
patch which violates RFC4271 quite badly, but managed to accidently sneak
its way in.
|
|
2007-08-31 Paul Jakma <paul.jakma@sun.com>
* (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN
on accepted connections, i.e. to not wait till after
collision-detect to send OPEN, which appears to be allowed in
RFC4271. This may help speed up establishing sessions, or help
avoid FSM problems with sessions to certain peers. Not enabled by
default though.
|
|
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_open_receive) fix warning in a zlog call
* bgp_vty.c: (bgp_vty_return) add return code
* bgpd.c: (bgp_master_init) setup the socket list.
* bgp_network.c: Remove the dual IPv4/6 socket thing for now, which
was implemented by Michael, until such time as its clear its
required for Linux (see sockopt comments). IPv6 support, including
IPv4 sessions on AF_INET6 sockets, therefore is broken, and the
'-l 0.0.0.0' arguments would need to be given to bgpd to make
things work here.
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Tomohiko Kusuda <kusuda@inetcore.com>
Leigh Brown <leigh@solinno.co.uk>
* bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5
sockopt and bgpd.
(bgp_md5_set_socket) Helper for bgp_connect
(bgp_md5_set) setup TCP-MD5SIG for the given peer.
(bgp_connect) call out to bgp_md5_set_socket for the outgoing
connect socket.
(bgp_socket) save references to the listen sockets, needed if
TCP-MD5SIG is applied later or changed.
* bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password'
commands.
* bgpd.c: (peer_{new,delete) manage TCP-MD5 password
(peer_group2peer_config_copy) inherit TCP-MD5 password
(peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5
passwords: applying checks, stopping peers, and trying to return
errors to UI, etc.
(bgp_config_write_peer) save password.
Fix missing newline in writeout of neighbor ... port.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: ifdef out various places that converted
v4mapped sockets to pure v4. Doesn't seem necessary at all,
presumably a workaround for now historical inet_ntop bugs (?)
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
|
|
2008-07-02 Stephen Hemminger <stephen.hemminger@vyatta.com>
* bgp_table.{c,h}: (bgp_table_finish) Take a double pointer and
scrub pointer in caller, so fixing double-free crashes seen
with route-server-client configuration.
* *.c: Adjust all callers of bgp_table_finish
2008-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_table.{c,h}: (bgp_node_delete, bgp_table_free) shouldn't be
exported.
|
|
* bgp_main.c: Add 'listenon' argument, to pass address to bind
to.
* bgp_network.c: (bgp_socket) Extend to take bind address.
* bgpd.c: (bgp_init) Pass stored address.
* bgpd.h: (struct bgp_master) storage for bind address
2007-11-01 Paul Jakma <paul.jakma@sun.com>
* tools/multiple-bgpd.sh: New, quick script to launch a bunch of
bgpds.
|
|
2007-04-07 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (general) Fix bug #352
(bgp_config_write_family_header) write ipv6/multicast
address family header.
(bgp_config_write) write out ipv6 multicast AF config.
|
|
2006-10-19 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_new) bgp element of peer absolutely must be
filled in, make peer_new() require it as argument and update
all callers. Fixes a crash reported by Jan 'yanek' Bortl and
Andrew Schorr where bgpd would crash in bgp_pcount_adjust
trying to dereference the bgp member of bgp->peer_self,
triggered through redistribution.
* bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
|
|
2006-09-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* bgpd.c: (peer_uptime) Fix printf format/arg mismatch in
zlog_warn message (%ld/size_t -> %lu/u_long).
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) fix the peer refcount issue exposed by previous, by
just removing refcounting of peer threads, which is mostly
senseless as they're references leading from struct peer,
which peer_free cancels anyway. No need to muck around..
* bgp_fsm.h: Just remove the refcounting from the various
TIMER/READ/WRITE/EVENT ON/OFF/ADD macros.
* bgp_fsm.c: (bgp_stop) use BGP_EVENT_FLUSH, no refcounts attached
to events anymore.
(bgp_event) remove peer_unlock, events not refcounted.
* bgpd.c: (peer_free) flush events before free.
|
|
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_delete) Ensure freed buffers can not be
accidently reused. A potential fix for bug #287.
|
|
2006-03-22 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_free) release the per-peer workqueue when
freeing the peer.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
|
|
* bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its
possible to terminate bgpd before workqueues were setup, causing
an abort/crash. Reported by Ashish Mehta of Sun.
|
|
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us
add work_queues for bgp_process.
* bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount.
Add bgp_info_{lock,unlock} helper functions.
Add bgp_info_{add,delete} helpers, to remove need for
users managing locking/freeing of bgp_info and bgp_node's.
* bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and
BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of
nodes.
* bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock
peer reference as appropriate.
* bgpd/bgp_damp.c: Remove its internal prototypes for
bgp_info_delete/free. Just use bgp_info_delete.
* bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers.
(struct peer) Add reference count 'lock'
(peer_lock,peer_unlock) New helpers to take/release reference
on struct peer.
* bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting
and balance how references are taken and released.
(bgp_advertise_free) release bgp_info reference, if appropriate
(bgp_adj_out_free) unlock peer
(bgp_advertise_clean) leave the adv references alone, or else
call bgp_advertise_free cant unlock them.
(bgp_adj_out_set) lock the peer on new adj's, leave the reference
alone otherwise. lock the new bgp_info reference.
(bgp_adj_in_set) lock the peer reference
(bgp_adj_in_remove) and unlock it here
(bgp_sync_delete) make hash_free on peer conditional, just in
case.
* bgpd/bgp_fsm.c: (general) document that the timers depend on
bgp_event to release a peer reference.
(bgp_fsm_change_status) moved up the file, unchanged.
(bgp_stop) Decrement peer lock as many times as cancel_event
canceled - shouldnt be needed but just in case.
stream_fifo_clean of obuf made conditional, just in case.
(bgp_event) always unlock the peer, regardless of return value
of bgp_fsm_change_status.
* bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's.
(bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs
along with a comment on it.
* bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup
some of the resource management around bgp_info. Refcount peer.
Add workqueues for bgp_process and clear_table.
(bgp_info_new) make static
(bgp_info_free) Ditto, and unlock the peer reference.
(bgp_info_lock,bgp_info_unlock) new exported functions
(bgp_info_add) Add a bgp_info to a bgp_node in correct fashion,
taking care of reference counts.
(bgp_info_delete) do the opposite of bgp_info_add.
(bgp_process_rsclient) Converted into a work_queue work function.
(bgp_process_main) ditto.
(bgp_processq_del) process work queue item deconstructor
(bgp_process_queue_init) process work queue init
(bgp_process) call init function if required, set up queue item
and add to queue, rather than calling process functions directly.
(bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts
(bgp_rib_withdraw) ditto
(bgp_update_rsclient) let bgp_info_add manage refcounts
(bgp_update_main) ditto
(bgp_clear_route_node) clear_node_queue work function, does
per-node aspects of what bgp_clear_route_table did previously
(bgp_clear_node_queue_del) clear_node_queue item delete function
(bgp_clear_node_complete) clear_node_queue completion function,
it unplugs the process queues, which have to be blocked while
clear_node_queue is being processed to prevent a race.
(bgp_clear_node_queue_init) init function for clear_node_queue
work queues
(bgp_clear_route_table) Sets up items onto a workqueue now, rather
than clearing each node directly. Plugs both process queues to
avoid potential race.
(bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage
bgp_info refcounts.
(bgp_static_update_rsclient) ditto
(bgp_static_update_main) ditto
(bgp_static_update_vpnv4) ditto, remove unneeded cast.
(bgp_static_withdraw) see bgp_static_withdraw_rsclient
(bgp_static_withdraw_vpnv4) ditto
(bgp_aggregate_{route,add,delete}) ditto
(bgp_redistribute_{add,delete,withdraw}) ditto
* bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer
reference
(peer_rsclient_unset_vty) ditto, but unlock same reference
* bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime
of struct peer.
(peer_lock,peer_unlock) peer refcount helpers
(peer_new) add initial refcounts
(peer_create,peer_create_accept) lock peer as appropriate
(peer_delete) unlock as appropriate, move out some free's to
peer_free.
(peer_group_bind,peer_group_unbind) peer refcounting as
appropriate.
(bgp_create) check CALLOC return value.
(bgp_terminate) free workqueues too.
* lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and
MTYPE_BGP_CLEAR_NODE_QUEUE
|
|
deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient
lists.
[backport candidate]
|
