summaryrefslogtreecommitdiff
path: root/bgpd/bgpd.c
AgeCommit message (Collapse)Author
2005-06-152005-06-15 Paul Jakma <paul.jakma@sun.com>paul
* bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its possible to terminate bgpd before workqueues were setup, causing an abort/crash. Reported by Ashish Mehta of Sun.
2005-06-012005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us add work_queues for bgp_process. * bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. Add bgp_info_{lock,unlock} helper functions. Add bgp_info_{add,delete} helpers, to remove need for users managing locking/freeing of bgp_info and bgp_node's. * bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of nodes. * bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock peer reference as appropriate. * bgpd/bgp_damp.c: Remove its internal prototypes for bgp_info_delete/free. Just use bgp_info_delete. * bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers. (struct peer) Add reference count 'lock' (peer_lock,peer_unlock) New helpers to take/release reference on struct peer. * bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting and balance how references are taken and released. (bgp_advertise_free) release bgp_info reference, if appropriate (bgp_adj_out_free) unlock peer (bgp_advertise_clean) leave the adv references alone, or else call bgp_advertise_free cant unlock them. (bgp_adj_out_set) lock the peer on new adj's, leave the reference alone otherwise. lock the new bgp_info reference. (bgp_adj_in_set) lock the peer reference (bgp_adj_in_remove) and unlock it here (bgp_sync_delete) make hash_free on peer conditional, just in case. * bgpd/bgp_fsm.c: (general) document that the timers depend on bgp_event to release a peer reference. (bgp_fsm_change_status) moved up the file, unchanged. (bgp_stop) Decrement peer lock as many times as cancel_event canceled - shouldnt be needed but just in case. stream_fifo_clean of obuf made conditional, just in case. (bgp_event) always unlock the peer, regardless of return value of bgp_fsm_change_status. * bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs along with a comment on it. * bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup some of the resource management around bgp_info. Refcount peer. Add workqueues for bgp_process and clear_table. (bgp_info_new) make static (bgp_info_free) Ditto, and unlock the peer reference. (bgp_info_lock,bgp_info_unlock) new exported functions (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, taking care of reference counts. (bgp_info_delete) do the opposite of bgp_info_add. (bgp_process_rsclient) Converted into a work_queue work function. (bgp_process_main) ditto. (bgp_processq_del) process work queue item deconstructor (bgp_process_queue_init) process work queue init (bgp_process) call init function if required, set up queue item and add to queue, rather than calling process functions directly. (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts (bgp_rib_withdraw) ditto (bgp_update_rsclient) let bgp_info_add manage refcounts (bgp_update_main) ditto (bgp_clear_route_node) clear_node_queue work function, does per-node aspects of what bgp_clear_route_table did previously (bgp_clear_node_queue_del) clear_node_queue item delete function (bgp_clear_node_complete) clear_node_queue completion function, it unplugs the process queues, which have to be blocked while clear_node_queue is being processed to prevent a race. (bgp_clear_node_queue_init) init function for clear_node_queue work queues (bgp_clear_route_table) Sets up items onto a workqueue now, rather than clearing each node directly. Plugs both process queues to avoid potential race. (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage bgp_info refcounts. (bgp_static_update_rsclient) ditto (bgp_static_update_main) ditto (bgp_static_update_vpnv4) ditto, remove unneeded cast. (bgp_static_withdraw) see bgp_static_withdraw_rsclient (bgp_static_withdraw_vpnv4) ditto (bgp_aggregate_{route,add,delete}) ditto (bgp_redistribute_{add,delete,withdraw}) ditto * bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer reference (peer_rsclient_unset_vty) ditto, but unlock same reference * bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime of struct peer. (peer_lock,peer_unlock) peer refcount helpers (peer_new) add initial refcounts (peer_create,peer_create_accept) lock peer as appropriate (peer_delete) unlock as appropriate, move out some free's to peer_free. (peer_group_bind,peer_group_unbind) peer refcounting as appropriate. (bgp_create) check CALLOC return value. (bgp_terminate) free workqueues too. * lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and MTYPE_BGP_CLEAR_NODE_QUEUE
2005-05-26 * bgpd.c: Deleting bgp->rsclient list needs fix similar to pree-groupshasso
deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient lists. [backport candidate]
2005-05-26 * bgpd.c: Don't crash while deleting list of peer-groups.hasso
[backport candidate]
2005-05-25 * bgpd.c: Fix obvious (routeserver patch) merge error. This makes "nohasso
neighbor x.x.x.x routemap [export|import] commands work again. Fixes bugzilla #184. [backport candidate]
2005-05-192005-05-19 Paul Jakma <paul@dishone.st>paul
* bgp_network.c: (bgp_accept) use XSTRDUP * bgpd.c: (peer_delete) XFREE the correct memtype, not free. (peer_create) use XSTRDUP * bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used (various) update -> s/bgp_stream_dup/stream_dup
2005-05-192005-05-19 Paul Jakma <paul@dishone.st>paul
* bgp_fsm.c: (bgp_stop) use sockunion_free, not XFREE.. * bgp_network.c: (bgp_getsockname) ditto * bgp_routemap.c: (route_match_peer) ditto, als use a ret value and remove one sockunion_free. * bgpd.c: (peer_delete) ditto
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-02-02 * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop"hasso
-> "disable-connected-check". [merge from GNU Zebra]
2005-02-02 * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c,hasso
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp graceful-restart" commands added. Show numbers of individual messages in "show ip bgp neighbor" command. Final pieces of graceful restart. [merge from GNU Zebra]
2005-02-01 * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighborhasso
capability route-refresh" commands. Route refresh capability is sent anyway now. Preserve dummy deprecated commands. [merge from GNU Zebra]
2005-02-01 * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for oldhasso
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor version" command as deprecated. [merge from GNU Zebra]
2005-02-01 * bgpd.[ch], bgp_vty.c, bgp_route.c: "Restart session afterhasso
maximum-prefix limit" feature support. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2004-12-09Add comments with warnings obtained on NetBSD/i386. Both are due togdt
size_t being used for streams. Perhaps cast to unsigned long before printf? Surely that's big enough even if size_t could be larger in theory. (no changelog, since only comment changes)
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
2004-10-132004-10-13 Paul Jakma <paul@dishone.st>paul
* (global) more const'ification and fixups of types to clean up code. * bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect, should use something like the VTY_GET_INTEGER macro, but without the vty_out bits.. * bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE (no_set_aggregator_as) ditto. * bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is returned, add comments about troublesome return value.
2004-10-03Common router id.hasso
2004-09-132004-09-13 Jose Luis Rubio <jrubio@dit.upm.es>paul
(at Technical University of Madrid as part of Euro6ix Project) Enhanced Route Server functionality and Route-Maps: * bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to support rs-clients. A 'struct bgp_table *rib' has been added to the first (to mantain a separated RIB for each rs-client) and two new route-maps have been added to the last (for import/export policies). Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX}, PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT. * bgpd/bgpd.c: Modified the functions that create/delete/etc peers in order to consider the new fields included in 'struct peer' for supporting rs-clients, i.e. the import/export route-maps and the 'struct bgp_table'. * bgpd/bgp_route.{ch}: Modified several functions related with receiving/sending announces in order to support the new Route Server capabilities. Function 'bgp_process' has been reorganized, creating an auxiliar function for best path selection ('bgp_best_selection'). Modified 'bgp_show' and 'bgp_show_route' for displaying information about any RIB (and not only the main bgp RIB). Added commands for displaying information about RS-clients RIBs: 'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M', etc * bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT}) and 'void *owner' which points to 'struct bgp' or 'struct peer' which owns the table. When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set. * bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and 'no neighbor ... route-server-client' now not only set/unset the flag PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct bgp_table' of the peer. Special actions are taken for peer_groups. Command 'neighbor ... route-map WORD (in|out)' now also supports two new kinds of route-map: 'import' and 'export'. Added commands 'clear bgp * rsclient', etc. These commands allow a new kind of soft_reconfig which affects only the RIB of the specified RS-client. Added commands 'show bgp rsclient summary', etc which display a summary of the rs-clients configured for the corresponding address family. * bgpd/bgp_routemap.c: A new match statement is available, 'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in import/export route-maps, and it matches when the peer who announces (when used in an import route-map) or is going to receive (when used in an export route-map) the route is the same than the one specified in the statement. For peer-groups the statement matches if the specified peer is member of the peer-group. A special version of the command, 'match peer local', matches with routes originated by the Route Server (defined with 'network ...', redistributed routes and default-originate). * lib/routemap.{ch}: Added a new clause 'call NAME' for use in route-maps. It jumps into the specified route-map and when it returns the first route-map ends if the called RM returns DENY_MATCH, or continues in other case.
2004-05-21Merge graceful restart capability display and some small fixes from Zebrahasso
repository by Rivo Nurges.
2004-05-20Merge bgpd changeset 1176 from Zebra repository by Rivo Nurges.hasso
2004-05-012004-05-01 Paul Jakma <paul@dishone.st>paul
* Revert the attempted clean-up of the dummy peer hack, reverts patchsets 435 (see 2004-02-17 below) and 456.
2004-04-202004-04-16 rivo nurges <rix@estpak.ee>paul
* bgpd.h: update cease subcodes to draft-ietf-idr-cease-subcode-05 * bgpd.h, bgpd.c, bgp_route.c, bgp_route.h: fix UNH IOL BGP-4.1.6a
2004-02-172004-02-17 Paul Jakma <paul@dishone.st>paul
* bgpd.h: (bgp_peer) add fd_local and fd_accept file descriptor's, fd becomes a pointer to one of these. * bgpd.c: (global) adjust for fact that fd is now a pointer. (peer_create_accept) removed. * bgp_route.c: (global) adjust for change of peer fd to pointer * bgp_packet.c: (bgp_collision_detect) adjust and remove the "replace with other peer" hack. * bgp_network.c: (bgp_accept) Remove the dummy peer hack. Update peer->fd_accept instead. (global) Adjust fd references - now a pointer. * bgp_fsm.c: (global) adjust peer fd to pointer. (bgp_connection_stop) new function, to stop connection. (global) adjust everything which closed peer fd to use bgp_connection_stop().
2003-08-132003-08-13 kunihiro <kunihiro@zebra.org>paul
* bgpd/bgp{_fsm.c,_vty.c,d.c,d.h}: Add support for "bgp log-neighbor-changes" command.
2002-12-13Initial revisionpaul