summaryrefslogtreecommitdiff
path: root/bgpd/bgpd.h
AgeCommit message (Collapse)Author
2012-06-13Revert "bgpd: Make socket init separate, so unit tests work again."Paul Jakma
This reverts commit 7621f336e2f346edee43227f0b1ef93fe769720b. See bug #727
2012-05-22bgpd: remove calls to peer_sort() from fast-pathJorge Boncompte [DTI2]
peer_sort() it's called so much as to be annoying. In the assumption that the 'sort' of the peer doesn't change during an established session, I have changed all calls to peer_sort() in the 'fast-path' to only check the 'sort'. All the calls from the vty and such still recalculate the sort and store it in the peer. There's a lot of other calls to peer_sort() that could be changed but some maube tricky, someone more knowledgeable may try to reduce them. This hits peer_sort() from 5th out of the stadium^H^H list on a full internet table loading profiling session. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-02bgpd: Make socket init separate, so unit tests work again.Paul Jakma
* Separate out BGP socket initialisation from bgp_get, and make it an explicit function. Allows unit tests to work again and probably also benefits dry-run. * bgpd.c: (bgp_get) move socket init out... (bgp_socket_init) to here * bgp_main.c: and call it after dry-run. * bgpd.h: (bgp_socket_init) add prototype
2012-04-09Merge branch 'quagga' into google-bgp-multipathAvneesh Sachdev
Conflicts: bgpd/bgp_route.c
2011-09-29bgpd: more SAFI fixesDenis Ovsienko
(with resolved conflict in bgpd/bgp_packet.c) Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-09-29bgpd: fix SAFI for for MPLS labeled VPN-IPv6Denis Ovsienko
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659) * bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
2011-09-27bgpd: don't be confused by "unspecific" subcode in the NOTIFY message.Dmitrij Tejblum
* bgp_debug.c (bgp_notify_open_msg, bgp_notify_update_msg, bgp_notify_cease_msg, bgp_notify_capability_msg): add messages for "unspecific" subcode.
2011-07-20bgpd: Add new configuration cli for eBGP and iBGP multipath.Josh Bailey
There is support to configure this for each (AFI,SAFI), but currently this configuration is only present for IPv4 unicast: maximum-paths [ibgp] <1-255> no maximum-paths [ibgp] [<1-255>] * bgpd/Makefile.am * Add bgp_mpath.h and bgp_mpath.c to build * bgpd/bgp_mpath.h * New file for bgp multipath declarations * define BGP_DEFAULT_MAXPATHS * bgpd/bgp_mpath.c * bgp_maximum_paths_set(): Configure maximum paths for the given afi, safi and bgp instance * bgp_maximum_paths_unset(): Return maximum paths configuration to the default setting for the given afi, safi and bgp instance * bgpd/bgp_vty.c * Define command strings for above CLI * bgp_config_write_maxpaths(): Outputs configuration for the given afi, safi and bgp instance * Install command elements for IPv4 unicast * bgpd/bgp_zebra.h * bgp_config_write_maxpaths(): External declaration * bgpd/bgpd.c * bgp_create(): Initialize bgp instance to default maximum paths setting * bgp_config_write_family(): Output maximum paths configuration for the given address family * bgp_config_write(): Output maximum paths configuration for IPv4 unicast address family * bgpd/bgpd.h * struct bgp: Add storage for maximum paths configuration for each afi, safi
2011-03-28bgpd: refine the setting up of GTSMStephen Hemminger
* bgpd.h: Add error code for setting GTSM on iBGP * bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal incompatibility of GTSM+iBGP to vty. Consider the session state when setting GTSM, and reset Open/Active peers to let them pick up new TTL from start.
2011-03-23bgpd: RFC 5082 Generalized TTL Security Mechanism supportNick Hilliard
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used to verify that incoming packets have been sent from neighbours no more than X IP hops away. In other words, this allows packets that were sent from further away (i.e. not by the neighbour with known distance, and so possibly a miscreant) to be filtered out. * lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL using the IP_MINTTL socket opt. * bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command error for minttl. (struct peer) add a config variable, to store the configured minttl. (peer_ttl_security_hops_{set,unset}) configuration handlers * bgpd.c: (peer_group_get) init gtsm_hops (peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and GTSM can't both be active for a peer at the same time. (peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with ebgp_multihop. (bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X". * bgp_vty.c: (bgp_vty_return) message for BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK (peer_ebgp_multihop_{un,}set_vty) * bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate. (bgp_connect) ditto for outbound.
2010-01-15bgp: use monotonic clock for time of dayStephen Hemminger
BGP uses time() to get system time of day; but that value fluctuates with time adjustments from NTP. This can cause premature flapping of peer sessions and other failures. Use the system monotonic clock supported by Quagga thread library to avoid issue. See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467 * bgpd/bgp_fsm.c * bgp_uptime_reset(): dismiss function * bgpd/bgpd.c * bgp_clock(): new function * bgpd/bgp_damp.c * bgp_reuse_timer(): employ bgp_clock() instead of time(NULL) * bgp_damp_withdraw(): idem * bgp_damp_update(): idem * bgp_damp_scan(): idem * bgp_damp_info_vty(): idem * bgp_damp_reuse_time_vty(): idem * bgpd/bgp_fsm.c * bgp_routeadv_timer(): idem * bgp_stop(): idem * bgp_establish(): idem * bgpd/bgp_packet.c * bgp_update_receive(): idem * bgpd/bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem * bgp_static_update_rsclient(): idem * bgp_static_update_main(): idem * bgp_static_update_vpnv4(): idem * bgp_aggregate_route(): idem * bgp_aggregate_add(): idem * bgp_redistribute_add(): idem * bgpd/bgp_snmp.c * bgpPeerTable(): idem * bgpTrapEstablished(): idem * bgpTrapBackwardTransition(): idem * bgpd/bgpd.c * peer_create(): idem * peer_uptime(): idem * bgp_master_init(): idem
2009-12-17bgpd: code cleanupStephen Hemminger
* bgpd/bgp_aspath.c * ashash: only used in one file, make static * aspath_count_numas(): dead code, sayonara * bgpd/bgpd.c * peer_nsf_stop(): only used in one file, make static * bgpd/bgp_packet.h * bgp_capability_receive(): add missing prototype for a global function
2009-06-18[bgpd] reference count the BGP instanceStephen Hemminger
When a BGP instance is deleted with lots of routes and neighbors it is possible for the peer rsclient queue to run after bgp_delete has been called. This would lead to bgpd crashing, see https://bugzilla.vyatta.com/show_bug.cgi?id=3436 The fix is to add reference counting to the BGP instance and defer actual freeing until all references are gone. This patch also fixes a memory leak where the self-reference peer instance was being created but never freed. The check in bgp_clear_route is no longer valid because it is possible for it to be called when peer is in Deleted state during cleanup.
2008-08-26Revert "[bgpd] Add 'bgp open-accept' option, to send OPEN immediately on ↵Paul Jakma
accepted conns" Revert commit d664ae1182c29b74b409bc8594b7bd0575e91ce9. An experimental patch which violates RFC4271 quite badly, but managed to accidently sneak its way in.
2008-08-22[bgpd] Add 'bgp open-accept' option, to send OPEN immediately on accepted connsPaul Jakma
2007-08-31 Paul Jakma <paul.jakma@sun.com> * (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN on accepted connections, i.e. to not wait till after collision-detect to send OPEN, which appears to be allowed in RFC4271. This may help speed up establishing sessions, or help avoid FSM problems with sessions to certain peers. Not enabled by default though.
2008-07-21[bgpd] TCP-MD5: password vty configuration and initial Linux supportPaul Jakma
2008-07-21 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call * bgp_vty.c: (bgp_vty_return) add return code * bgpd.c: (bgp_master_init) setup the socket list. * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which was implemented by Michael, until such time as its clear its required for Linux (see sockopt comments). IPv6 support, including IPv4 sessions on AF_INET6 sockets, therefore is broken, and the '-l 0.0.0.0' arguments would need to be given to bgpd to make things work here. 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Tomohiko Kusuda <kusuda@inetcore.com> Leigh Brown <leigh@solinno.co.uk> * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 sockopt and bgpd. (bgp_md5_set_socket) Helper for bgp_connect (bgp_md5_set) setup TCP-MD5SIG for the given peer. (bgp_connect) call out to bgp_md5_set_socket for the outgoing connect socket. (bgp_socket) save references to the listen sockets, needed if TCP-MD5SIG is applied later or changed. * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' commands. * bgpd.c: (peer_{new,delete) manage TCP-MD5 password (peer_group2peer_config_copy) inherit TCP-MD5 password (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 passwords: applying checks, stopping peers, and trying to return errors to UI, etc. (bgp_config_write_peer) save password. Fix missing newline in writeout of neighbor ... port. 2008-07-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: ifdef out various places that converted v4mapped sockets to pure v4. Doesn't seem necessary at all, presumably a workaround for now historical inet_ntop bugs (?) 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> * sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
2007-11-012007-10-30 Nick Hilliard <nick@inex.ie>Paul Jakma
* bgp_main.c: Add 'listenon' argument, to pass address to bind to. * bgp_network.c: (bgp_socket) Extend to take bind address. * bgpd.c: (bgp_init) Pass stored address. * bgpd.h: (struct bgp_master) storage for bind address 2007-11-01 Paul Jakma <paul.jakma@sun.com> * tools/multiple-bgpd.sh: New, quick script to launch a bunch of bgpds.
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-08-06[bgpd] Add support for AS_PATHLIMIT / draft-ietf-idr-as-pathlimitPaul Jakma
2007-07-31 Paul Jakma <paul.jakma@sun.com> * (general) Support for draft-ietf-idr-as-pathlimit-03. * bgp_attr.h: (struct attr) Add pathlimit struct bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. (attrhash_key_make) tally pathlimit too (attrhash_cmp) cmp pathlimit attr (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. (bgp_attr_parse) ditto (bgp_packet_attribute) Write out AS_PATHLIMIT when set (bgp_dump_routes_attr) ditto * bgp_route.h: (struct bgp_static) Add TTL field * bgp_route.c: (bgp_announce_check) Drop paths that are over their hop-count TTL before sending via EBGP. Mangle ASN in pathlimit for confeds/private as best we can. (bgp_static_update_{rsclient,main}) Add any configure pathlimit information. (bgp_pathlimit_update_parents) New, update atomic-aggr setting for parents of an aspathlimit'ed static. (bgp_static_set) Add TTL argument, for all the 'bgp network' commands. Call previous for TTL changed statics. (bgp_static_unset) Call pathlimit_update_parents. (various bgp network commands) Add 'pathlimit <0-255>' qualifier to all the various forms, bar route-map - which can set ttl itself. * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and 'match pathlimit as'. * doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
2006-09-14[bgpd] Fix 0.99 shutdown regression, introduce Clearing and Deleted statesPaul Jakma
2006-09-14 Paul Jakma <paul.jakma@sun.com> * (general) Fix some niggly issues around 'shutdown' and clearing by adding a Clearing FSM wait-state and a hidden 'Deleted' FSM state, to allow deleted peers to 'cool off' and hit 0 references. This introduces a slow memory leak of struct peer, however that's more a testament to the fragility of the reference counting than a bug in this patch, cleanup of reference counting to fix this is to follow. * bgpd.h: Add Clearing, Deleted states and Clearing_Completed and event. * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and Deleted. * bgp_fsm.h: Don't allow timer/event threads to set anything for Deleted peers. * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted needs to stop everything. (bgp_stop) Remove explicit fsm_change_status call, the general framework handles the transition. (bgp_start) Log a warning if a start is attempted on a peer that should stay down, trying to start a peer. (struct .. FSM) Add Clearing_Completed events, has little influence except when in state Clearing to signal wait-state can end. Add Clearing and Deleted states, former is a wait-state, latter is a placeholder state to allow peers to disappear quietly once refcounts settle. (bgp_event) Try reduce verbosity of FSM state-change debug, changes to same state are not interesting (Established->Established) Allow NULL action functions in FSM. * bgp_packet.c: (bgp_write) Use FSM events, rather than trying to twiddle directly with FSM state behind the back of FSM. (bgp_write_notify) ditto. (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else this patch crashes, now it leaks instead. * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed event, to end clearing. (bgp_clear_route) See extensive comments. * bgpd.c: (peer_free) should only be called while in Deleted, peer refcounting controls when peer_free is called. bgp_sync_delete should be here, not in peer_delete. (peer_delete) Initiate delete. Transition to Deleted state manually. When removing peer from indices that provide visibility of it, take great care to be idempotent wrt the reference counting of struct peer through those indices. Use bgp_timer_set, rather than replicating. Call to bgp_sync_delete isn't appropriate here, sync can be referenced while shutting down and finishing deletion. (peer_group_bind) Take care to be idempotent wrt list references indexing peers.
2006-09-07[bgpd] Handle pcount as flags are changed, fixing pcount issuesPaul Jakma
2006-09-06 Paul Jakma <paul.jakma@sun.com> * (general) Squash any and all prefix-count issues by abstracting route flag changes, and maintaining count as and when flags are modified (rather than relying on explicit modifications of count being sprinkled in just the right places throughout the code). * bgp_route.c: (bgp_pcount_{dec,inc}rement) removed. (bgp_pcount_adjust) new, update prefix count as needed for a given route. (bgp_info_{uns,s}et_flag) set/unset a BGP_INFO route status flag, calling previous function when appropriate. (general) Update all set/unsets of flags to use previous. Remove pcount_{dec,inc}rement calls. No need to unset BGP_INFO_VALID in places where bgp_info_delete is called, it does that anyway. * bgp_{damp,nexthop}.c: Update to use bgp_info_{un,}set_flag. * bgp_route.h: Export bgp_info_{un,}set_flag. Add a 'meta' BGP_INFO flag, BGP_INFO_UNUSEABLE. Move BGP_INFO_HOLDDOWN macro to here from bgpd.h
2006-02-21[bgpd] Record afi/safi in bgp_table. Serialise peer clear with FSM.Paul Jakma
2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgpd.h: move the clear_node_queue to be peer specific. Add a new peer status flag, PEER_STATUS_CLEARING. * bgp_table.h: (struct bgp_table) Add fields to record afi, safi of the table. (bgp_table_init) Take afi and safi to create table for. * bgp_table.c: (bgp_table_init) record the afi and safi. * bgp_nexthop.c: Update all calls to bgp_table_init. * bgp_vty.c: ditto. * bgpd.c: ditto. * bgp_fsm.c: (bgp_timer_set) dont bring up a session which is clearing. * bgp_route.c: (general) Update all bgp_table_init calls. (bgp_process_{rsclient,main}) clear_node is serialised via PEER_STATUS_CLEARING and fsm now. (struct bgp_clear_node_queue) can be removed. struct bgp_node can be the queue item data directly, as struct peer can be kept in the new wq global user data and afi/safi can be retrieved via bgp_node -> bgp_table. (bgp_clear_route_node) fix to get peer via wq->spec.data, afi/safi via bgp_node->bgp_table. (bgp_clear_node_queue_del) no more item data to delete, only unlock the bgp_node. (bgp_clear_node_complete) only need to unset CLEARING flag and unlock struct peer. (bgp_clear_node_queue_init) queue attaches to struct peer now. record peer name as queue name. (bgp_clear_route_table) If queue transitions to active, serialise clearing by setting PEER_STATUS_CLEARING rather than plugging process queue, and lock peer while queue active. Update to pass only bgp_node as per-queue-item specific data.
2006-01-10[bgpd] remove export of long defunct functionpaul
2006-01-10 Juris Kalnins <juris@mt.lv> * bgpd.h: (bgp_router_id_unset) ex-function, remove.
2005-08-222005-08-22 Paul Jakma <paul.jakma@sun.com>paul
* bgp_route.h: (struct bgp_info) add a new flag, BGP_INFO_REMOVED. BGP_INFO_VALID is already overloaded, don't care to do same thing to STALE or HISTORY. * bgpd.h: (BGP_INFO_HOLDDOWN) Add INFO_REMOVED to the macro, as a route which should generally be ignored. * bgp_route.c: (bgp_info_delete) Just set the REMOVE flag, rather than doing actual work, so that bgp_process (called directly, or indirectly via the scanner) can catch withdrawn routes. (bgp_info_reap) Actually remove the route, what bgp_info_delete used to do, only for use by bgp_process. (bgp_best_selection) reap any REMOVED routes, other than the old selected route. (bgp_process_rsclient) reap the old-selected route, if appropriate (bgp_process_main) ditto (bgp_rib_withdraw, bgp_rib_remove) make them more consistent with each other. Don't play games with the VALID flag, bgp_process is async now, so it didn't make a difference anyway. Remove the 'force' argument from bgp_rib_withdraw, withdraw+force is equivalent to bgp_rib_remove. Update all its callers. (bgp_update_rsclient) bgp_rib_withdraw and force set is same as bgp_rib_remove. (route_vty_short_status_out) new helper to print the leading route-status string used in many command outputs. Consolidate. (route_vty_out, route_vty_out_tag, damp_route_vty_out, flap_route_vty_out) use route_vty_short_status_out rather than duplicate. (route_vty_out_detail) print state of REMOVED flag. (BGP_SHOW_SCODE_HEADER) update for Removed flag.
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
2005-06-012005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us add work_queues for bgp_process. * bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. Add bgp_info_{lock,unlock} helper functions. Add bgp_info_{add,delete} helpers, to remove need for users managing locking/freeing of bgp_info and bgp_node's. * bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of nodes. * bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock peer reference as appropriate. * bgpd/bgp_damp.c: Remove its internal prototypes for bgp_info_delete/free. Just use bgp_info_delete. * bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers. (struct peer) Add reference count 'lock' (peer_lock,peer_unlock) New helpers to take/release reference on struct peer. * bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting and balance how references are taken and released. (bgp_advertise_free) release bgp_info reference, if appropriate (bgp_adj_out_free) unlock peer (bgp_advertise_clean) leave the adv references alone, or else call bgp_advertise_free cant unlock them. (bgp_adj_out_set) lock the peer on new adj's, leave the reference alone otherwise. lock the new bgp_info reference. (bgp_adj_in_set) lock the peer reference (bgp_adj_in_remove) and unlock it here (bgp_sync_delete) make hash_free on peer conditional, just in case. * bgpd/bgp_fsm.c: (general) document that the timers depend on bgp_event to release a peer reference. (bgp_fsm_change_status) moved up the file, unchanged. (bgp_stop) Decrement peer lock as many times as cancel_event canceled - shouldnt be needed but just in case. stream_fifo_clean of obuf made conditional, just in case. (bgp_event) always unlock the peer, regardless of return value of bgp_fsm_change_status. * bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs along with a comment on it. * bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup some of the resource management around bgp_info. Refcount peer. Add workqueues for bgp_process and clear_table. (bgp_info_new) make static (bgp_info_free) Ditto, and unlock the peer reference. (bgp_info_lock,bgp_info_unlock) new exported functions (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, taking care of reference counts. (bgp_info_delete) do the opposite of bgp_info_add. (bgp_process_rsclient) Converted into a work_queue work function. (bgp_process_main) ditto. (bgp_processq_del) process work queue item deconstructor (bgp_process_queue_init) process work queue init (bgp_process) call init function if required, set up queue item and add to queue, rather than calling process functions directly. (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts (bgp_rib_withdraw) ditto (bgp_update_rsclient) let bgp_info_add manage refcounts (bgp_update_main) ditto (bgp_clear_route_node) clear_node_queue work function, does per-node aspects of what bgp_clear_route_table did previously (bgp_clear_node_queue_del) clear_node_queue item delete function (bgp_clear_node_complete) clear_node_queue completion function, it unplugs the process queues, which have to be blocked while clear_node_queue is being processed to prevent a race. (bgp_clear_node_queue_init) init function for clear_node_queue work queues (bgp_clear_route_table) Sets up items onto a workqueue now, rather than clearing each node directly. Plugs both process queues to avoid potential race. (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage bgp_info refcounts. (bgp_static_update_rsclient) ditto (bgp_static_update_main) ditto (bgp_static_update_vpnv4) ditto, remove unneeded cast. (bgp_static_withdraw) see bgp_static_withdraw_rsclient (bgp_static_withdraw_vpnv4) ditto (bgp_aggregate_{route,add,delete}) ditto (bgp_redistribute_{add,delete,withdraw}) ditto * bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer reference (peer_rsclient_unset_vty) ditto, but unlock same reference * bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime of struct peer. (peer_lock,peer_unlock) peer refcount helpers (peer_new) add initial refcounts (peer_create,peer_create_accept) lock peer as appropriate (peer_delete) unlock as appropriate, move out some free's to peer_free. (peer_group_bind,peer_group_unbind) peer refcounting as appropriate. (bgp_create) check CALLOC return value. (bgp_terminate) free workqueues too. * lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and MTYPE_BGP_CLEAR_NODE_QUEUE
2005-05-232005-05-23 Paul Jakma <paul@dishone.st>paul
* bgp_fsm.h: Add extern qualifier to exported functions * bgp_nexthop.c: add static to nexthop specific globals * *.h: Add guard defines
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2005-02-02 * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop"hasso
-> "disable-connected-check". [merge from GNU Zebra]
2005-02-02 * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c,hasso
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp graceful-restart" commands added. Show numbers of individual messages in "show ip bgp neighbor" command. Final pieces of graceful restart. [merge from GNU Zebra]
2005-02-01 * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighborhasso
capability route-refresh" commands. Route refresh capability is sent anyway now. Preserve dummy deprecated commands. [merge from GNU Zebra]
2005-02-01 * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for oldhasso
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor version" command as deprecated. [merge from GNU Zebra]
2005-02-01 * bgpd.[ch], bgp_vty.c, bgp_route.c: "Restart session afterhasso
maximum-prefix limit" feature support. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2004-10-132004-10-13 Paul Jakma <paul@dishone.st>paul
* (global) more const'ification and fixups of types to clean up code. * bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect, should use something like the VTY_GET_INTEGER macro, but without the vty_out bits.. * bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE (no_set_aggregator_as) ditto. * bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is returned, add comments about troublesome return value.
2004-10-03Common router id.hasso
2004-09-132004-09-13 Jose Luis Rubio <jrubio@dit.upm.es>paul
(at Technical University of Madrid as part of Euro6ix Project) Enhanced Route Server functionality and Route-Maps: * bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to support rs-clients. A 'struct bgp_table *rib' has been added to the first (to mantain a separated RIB for each rs-client) and two new route-maps have been added to the last (for import/export policies). Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX}, PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT. * bgpd/bgpd.c: Modified the functions that create/delete/etc peers in order to consider the new fields included in 'struct peer' for supporting rs-clients, i.e. the import/export route-maps and the 'struct bgp_table'. * bgpd/bgp_route.{ch}: Modified several functions related with receiving/sending announces in order to support the new Route Server capabilities. Function 'bgp_process' has been reorganized, creating an auxiliar function for best path selection ('bgp_best_selection'). Modified 'bgp_show' and 'bgp_show_route' for displaying information about any RIB (and not only the main bgp RIB). Added commands for displaying information about RS-clients RIBs: 'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M', etc * bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT}) and 'void *owner' which points to 'struct bgp' or 'struct peer' which owns the table. When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set. * bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and 'no neighbor ... route-server-client' now not only set/unset the flag PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct bgp_table' of the peer. Special actions are taken for peer_groups. Command 'neighbor ... route-map WORD (in|out)' now also supports two new kinds of route-map: 'import' and 'export'. Added commands 'clear bgp * rsclient', etc. These commands allow a new kind of soft_reconfig which affects only the RIB of the specified RS-client. Added commands 'show bgp rsclient summary', etc which display a summary of the rs-clients configured for the corresponding address family. * bgpd/bgp_routemap.c: A new match statement is available, 'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in import/export route-maps, and it matches when the peer who announces (when used in an import route-map) or is going to receive (when used in an export route-map) the route is the same than the one specified in the statement. For peer-groups the statement matches if the specified peer is member of the peer-group. A special version of the command, 'match peer local', matches with routes originated by the Route Server (defined with 'network ...', redistributed routes and default-originate). * lib/routemap.{ch}: Added a new clause 'call NAME' for use in route-maps. It jumps into the specified route-map and when it returns the first route-map ends if the called RM returns DENY_MATCH, or continues in other case.
2004-05-21Merge graceful restart capability display and some small fixes from Zebrahasso
repository by Rivo Nurges.
2004-05-20Merge bgpd changeset 1176 from Zebra repository by Rivo Nurges.hasso
2004-05-012004-05-01 Paul Jakma <paul@dishone.st>paul
* Revert the attempted clean-up of the dummy peer hack, reverts patchsets 435 (see 2004-02-17 below) and 456.
2004-04-202004-04-16 rivo nurges <rix@estpak.ee>paul
* bgpd.h: update cease subcodes to draft-ietf-idr-cease-subcode-05 * bgpd.h, bgpd.c, bgp_route.c, bgp_route.h: fix UNH IOL BGP-4.1.6a
2004-02-172004-02-17 Paul Jakma <paul@dishone.st>paul
* bgpd.h: (bgp_peer) add fd_local and fd_accept file descriptor's, fd becomes a pointer to one of these. * bgpd.c: (global) adjust for fact that fd is now a pointer. (peer_create_accept) removed. * bgp_route.c: (global) adjust for change of peer fd to pointer * bgp_packet.c: (bgp_collision_detect) adjust and remove the "replace with other peer" hack. * bgp_network.c: (bgp_accept) Remove the dummy peer hack. Update peer->fd_accept instead. (global) Adjust fd references - now a pointer. * bgp_fsm.c: (global) adjust peer fd to pointer. (bgp_connection_stop) new function, to stop connection. (global) adjust everything which closed peer fd to use bgp_connection_stop().
2003-08-132003-08-13 kunihiro <kunihiro@zebra.org>paul
* bgpd/bgp{_fsm.c,_vty.c,d.c,d.h}: Add support for "bgp log-neighbor-changes" command.
2003-08-122003-08-11 kunihiro <kunihiro@zebra.orgpaul
* bgp_route{,map}.c: Extend 'set ip next-hop' in route-maps with ability to specify 'peer-address' rather than IP.
2003-04-28Import of zebra.org 20030428-18:07 ISTpaul
2003-04-07[zebra 18626] move zebra socket paths to configure.acpaul
moved definition of the various socket paths from the per daemon header files into configure.ac. it will set the paths to be in the directory specified by --localstatedir=<prefix> or otherwise will try to guess as best it can ( a la pid file path detection - which probably should try reference ${prefix} too). the present hardcoded socket path, /tmp, isnt really correct. should be in /var somewhere really.
2002-12-13Initial revisionpaul