summaryrefslogtreecommitdiff
path: root/bgpd
AgeCommit message (Collapse)Author
2012-05-22bgpd: use on stack struct attr_extra on bgp_attr_aggregate_intern()Jorge Boncompte [DTI2]
Reduce memory heap fragmentation and pressure on the memory allocator. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: reduce attrhash_make_key() indirectionsJorge Boncompte [DTI2]
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: remove some useless initializationsJorge Boncompte [DTI2]
* bgp_attr.c: (bgp_attr_default_intern) bgp_attr_default_set() already initializes the memory. Fixes a struct attr_extra leak. * bgp_route.c: Remove useless on stack struct initializations. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize bgp_info_cmp()Jorge Boncompte [DTI2]
* bgp_route.c: (bgp_info_cmp) Reduce indirections, precalculate some values that are used several times, reduce conditionals. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize loops on [e]community_hash_make()Jorge Boncompte [DTI2]
This change reduces loop count. Less jumps. * bgp_community.c: One loop per community. * bgp_ecommunity.c: One loop per ecommunity. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: remove calls to peer_sort() from fast-pathJorge Boncompte [DTI2]
peer_sort() it's called so much as to be annoying. In the assumption that the 'sort' of the peer doesn't change during an established session, I have changed all calls to peer_sort() in the 'fast-path' to only check the 'sort'. All the calls from the vty and such still recalculate the sort and store it in the peer. There's a lot of other calls to peer_sort() that could be changed but some maube tricky, someone more knowledgeable may try to reduce them. This hits peer_sort() from 5th out of the stadium^H^H list on a full internet table loading profiling session. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: debug buffers cleanup and optimizationJorge Boncompte [DTI2]
Just the first change pushes bgp_update_receive() from 6th to ~14th on a full internet table load profiling session. * bgp_debug.c: (bgp_update_receive) The attrstr initialization is expensive, moved under the debug conditional where it is used and just initialize the first char to NULL. (bgp_update_default_send) Initialize attrstr needed for bgp_dump_attr(). Moved some buffers used for printing IP[4|6] addresses under the debug conditionals that use them and reduced its size. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize bgp_nexthop_self()Jorge Boncompte [DTI2]
This function scores 2nd, profiling a full internet table load. It's called for every prefix received. Instead of looping in the interface lists comparing addresses use a hash to mantain them. * bgpd.c: Init the own address hash. * bgp_nexthop.c: Introduce methods to maintain an own address hash. (bgp_connected_add) add addresses to the hash. (bgp_connected_delete) delete addresses from the hash. (bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t parameter. * bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address) Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize aspath string representation and assegments handlingJorge Boncompte [DTI2]
* bgp_aspath.h: Add str_len to struct aspath. * bgp_aspath.c: Save the aspath string representation length and use it instead of strlen(). (aspath_make_str_count) assign the string buffer directly for consistency with the string length and change the return type to void. (aspath_dup) use str_len and copy the string instead of calling aspath_make_str_count(). (assegment_data_new) change from XCALLOC to XMALLOC. All users initialize the memory before use. (assegment_data_free) unused, removed. (aspath_intern) check that there's always a ->str pointer. (aspath_hash_alloc) reuse assegments and string representation instead of copying them. (aspath_parse) now aspath_hash_alloc does not dupes memory, free the temporary structures only if the aspath it is in the hash. (aspath_cmp_left) remove useless NULL initialization. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-21bgpd: fix crash with vpnv4 soft-reconfigurationJorge Boncompte [DTI2]
bgp_afi_node_get() expects a non-NULL prd for a SAFI_MPLS_VPN prefix. * bgp_route.c: pass down the struct prefix_rd from bgp_soft_reconfig_in() and bgp_soft_reconfig_rsclient(). Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-02bgpd: cleanup, use correct buffer sizes for sockunion2str()Jorge Boncompte [DTI2]
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: Fix memory leak of some "show ip bgp neighbor" commandsJorge Boncompte [DTI2]
sockunion_str2su() use is prone to memory leaks. Remove it's use all over the code. At least these commands leaked a sockunion union: - show ip bgp vpnv4 ... routes - show ip bgp ... received prefix-filter Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: Fix memory leak with 'set ip next-hop peer-address'Jorge Boncompte [DTI2]
A route-map with the mentioned statement causes a memory leak for every prefix that matches. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: fix for route-maps with "match peer local" statementsJorge Boncompte [DTI2]
A route-map with a 'match peer local' statement it's shown like 'match peer (null)' on config output... ... and it's unparsable on daemon startup. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd, zebra: Fix format for some metric outputsJorge Boncompte [DTI2]
Metrics are unsigned values. * bgpd/bgp_{debug,route,vty}.c, * zebra/zebra_vty.c: replace %d with %u for metrics & distances Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [reworded commit message] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: Fix regression in args consolidation, total should be inited from argsPaul Jakma
* bgp_attr.c: (bgp_attr_unknown) total should be initialised from the args.
2012-05-02bgpd: Make socket init separate, so unit tests work again.Paul Jakma
* Separate out BGP socket initialisation from bgp_get, and make it an explicit function. Allows unit tests to work again and probably also benefits dry-run. * bgpd.c: (bgp_get) move socket init out... (bgp_socket_init) to here * bgp_main.c: and call it after dry-run. * bgpd.h: (bgp_socket_init) add prototype
2012-04-28bgpd: fix up multipath merge breakageDavid Lamparter
the BGP multipath code was developed against a pre-f6f434b Quagga where bgp_attr_unintern and ecommunity_free took single-star pointers. They now take double-star pointers. * bgpd/bgp_mpath.c: fix up bgp_attr_unintern & ecommunity_free calls. Signed-off-by: David Lamparter <equinox@diac24.net>
2012-04-16bgpd: Fix crash when disabling dampening (BZ#687)Jorge Boncompte [DTI2]
Vladimir Podobaev reported that the following commands crashed the daemon. router bgp 123 bgp dampening no bgp dampening 1 2 3 4 no bgp dampening The problem was that bgp_damp_info_clean() tried to dereference the already freed reuse_list array in the second call to "no bgp dampening". Fixed by checking in bgp_damp_disable() that the dampening it's enabled before doing the cleanup. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
2012-04-16bgpd: merge osr/quagga-osr-patches (BZ#700)David Lamparter
this merges a bgp capability negotiation fix where bgpd would fail if no multiprotocol capability was present, but other capabilities were.
2012-04-09Merge branch 'quagga' into google-bgp-multipathAvneesh Sachdev
Conflicts: bgpd/bgp_route.c
2012-04-08bgpd: fix issue in capability negotiation (BZ#700)Avneesh Sachdev
Address problem where bgpd would reject a session if a peer sent some capabilities in its Open message, but did not include a Multiprotocol extensions capability. Note that the session would come up if there were no capabilities at all in the Open message. * Add the 'mp_capability' out parameter to bgp_capability_parse(). Set it to '1' if a Multiprotocol extensions capability is encountered. * Switch on 'mp_capability' instead of 'capability' in the calling functions to determine if the peer indicated the set of AFI/SAFIs it supports. The net result is that when a peer does not send an MP capability, it is assumed to support the AFI/SAFIs configured for it locally.
2012-03-27bgpd: bgp_attr_flags_diagnose shouldn't assertPaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_flags_diagnose) debug code for error-handling paths probably shouldn't assert, instead it should just log that there was no problem.
2012-03-27bgpd: attr_parse call to attr_malformed should deal with PROCEED error casePaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_parse) the invalid flag check call to bgp_attr_malformed is pretty useless if it doesn't actually allow for the PROCEED non-error case.
2012-03-27bgpd: Fix silly mistake in bgp_attr_flag_invalidPaul Jakma
* bgp_attr.c: (bgp_attr_flag_invalid) flags is meant to be masked off with the mask variable...
2012-03-25bgpd: malformed attribute error that can still proceed should fixup getpPaul Jakma
* bgp_attr.c: (bgp_attr_malformed) When a malformed attribute error can be ignored, and BGP message processing may still proceed, the stream getp should be adjusted to the end of the attribute - the caller may not have consumed all the attribute. Problem noted by Martin Winter in bug 678. Also, rename the 'startp' local to 'notify_datap', for clarity.
2012-03-05Merge remote-tracking branch 'quagga-gnu.org/master'Paul Jakma
2012-03-04bgpd: Open option parse errors don't NOTIFY, resulting in abort & DoSPaul Jakma
* bgp_packet.c: (bgp_open_receive) Errors from bgp_open_option_parse are detected, and the code will stop processing the OPEN and return. However it does so without calling bgp_notify_send to send a NOTIFY - which means the peer FSM doesn't get stopped, and bgp_read will be called again later. Because it returns, it doesn't go through the code near the end of the function that removes the current message from the peer input streaam. Thus the next call to bgp_read will try to parse a half-parsed stream as if it were a new BGP message, leading to an assert later in the code when it tries to read stuff that isn't there. Add the required call to bgp_notify_send before returning. * bgp_open.c: (bgp_capability_as4) Be a bit stricter, check the length field corresponds to the only value it can be, which is the amount we're going to read off the stream. And make sure the capability flag gets set, so callers can know this capability was read, regardless. (peek_for_as4_capability) Let bgp_capability_as4 do the length check.
2012-02-28bgpd: Move up flag-check calls, parcel up attr-parser args, and other cleanupsPaul Jakma
* bgp_attr.h: (struct bgp_attr_parser_args) Attribute parsing context, containing common arguments. * bgp_attr.c: (general) Move the bgp_attr_flag_invalid flag-check calls up, out of each individual attr parser function, to be done once in attr_parse. Similarly move the calculation of the 'total' attribute length field up to attr_parse. Bundle together common arguments to attr-parsing functions and helpers into (struct bgp_attr_parser_args), so it can be passed by reference down the stack & also de-clutter the argument lists & make it easier to add/modify the context for attr-parsing - add local const aliases to avoid modifying body of code too much. This also should help avoid cut & paste errors, where calls to helpers with hard-coded attribute types are pasted to other functions but the code isn't changed. (bgp_attr_flags_diagnose) as above. (bgp_attr_flag_invalid) as above. (bgp_attr_{origin,aspath,as4_path,nexthop,med,local_pref,atomic}) as above. (bgp_attr_{aggregator,as4_aggregator,community,originator_id}) as above (bgp_attr_{cluster_list,ext_communities},bgp_mp_{un,}reach_parse) as above (bgp_attr_unknown) as above. (bgp_attr_malformed) as above. Also, startp and length have to be special-cased, because whether or not to send attribute data depends on the particular error - a separate length argument, distinct from args->length, indicates whether or not the attribute data should be sent in the NOTIFY. (bgp_attr_aspath_check) Call to bgp_attr_malformed is wrong here, there is no attribute parsing context - e.g. the 'flag' argument is unlikely to be right, remove it. Explicitly handle the error instead. (bgp_attr_munge_as4_attrs) Flag argument is pointless. As the comment notes, the check here is pointless as AS_PATH presence already checked elsewhere. (bgp_attr_parse) Do bgp_attr_flag_invalid call here. Use (struct bgp_attr_parser_args) for args to attr parser functions. Remove out-of-context 'flag' argument to as4 checking functions.
2012-02-28bgpd: consolidate attribute flag checksPaul Jakma
* bgpd/bgp_attr.c: (attr_flags_values []) array of required flags for attributes, EXTLEN & PARTIAL masked off as "dont care" as appropriate. (bgp_attr_flag_invalid) check if flags may be invalid, according to the above table & RFC rules. (bgp_attr_*) Use bgp_attr_flag_invalid. (bgp_attr_as4_aggregator) ditto, also take startp argument for the NOTIFY data. (bgp_attr_parse) pass startp to bgp_attr_as4_aggregator
2012-01-23bgpd: Addition of ipv6 network command in Multicast address family mode.G.Balaji
The patch adds the ipv6 network command in the BGP multicast address family mode.
2012-01-23bgpd: IPv6 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-23bgpd: IPv4 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-09bgpd: reinstate zlookup checks, required for BGP without zebraPaul Jakma
* bgp_nexthop.c: The nexthop lookup cache has to return success for queried nexthops if bgpd isn't connected to zebra, or else BGP without zebra doesn't work.
2012-01-08bgpd: Fix incorrect attribute type code in call to bgp_attr_malformedPaul Jakma
2012-01-08bgpd: Improve flag error messages in bgp_attr_aspathPaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_aspath) error message could be misleading, clearly log what flag was incorrect. (Problem noted in "bgpd: fix error message in bgp_attr_aspath()" in Quagga-RE)
2012-01-08bgpd: rewrite attr flag error loggingDenis Ovsienko
* bgp_attr.c * attr_flag_str: new message list * bgp_attr_flags_diagnose(): new function, implements previously added error logging in a generic way * bgp_attr_origin(): use bgp_attr_flags_diagnose() * bgp_attr_nexthop(): ditto * bgp_attr_med(): ditto * bgp_attr_local_pref(): ditto * bgp_attr_atomic(): ditto * bgp_attr_originator_id(): ditto * bgp_attr_cluster_list(): ditto * bgp_mp_reach_parse(): ditto * bgp_mp_unreach_parse(): ditto
2012-01-08bgpd: improve "show ip bgp scan detail"Denis Ovsienko
* bgp_nexthop.c (show_ip_bgp_scan_tables): access proper structure field in AF_INET6 case, handle ifindex NH type properly
2012-01-08bgpd: dismiss some zlookup checksDenis Ovsienko
bgp_nexthop_onlink(): zlookup is not used here at all bgp_nexthop_lookup_ipv6(): rely on the detection performed by "query" function (this also changes the fallback value to 0), reorder if-block bgp_nexthop_lookup(): idem
2012-01-08bgpd: add "show ip bgp scan detail" commandDenis Ovsienko
* bgp_nexthop.c: (show_ip_bgp_scan) transform into show_ip_bgp_scan_tables(), which uses inet_ntop() and can dump nexthops on request; (show_ip_bgp_scan_detail_cmd) new function
2012-01-08bgpd: touch nexthop handling codeDenis Ovsienko
bgp_nexthop_lookup_ipv6(): declare variables where they are actually used, drop no-op initialization (the field is already 0) bgp_nexthop_lookup(): ditto bgp_nexthop_check_ebgp(): rename to bgp_nexthop_onlink() bgp_nexthop_cache_changed(): rename to bgp_nexthop_cache_different()
2012-01-06general: remove inline qualifiers and move in-header functions to objectsPaul Jakma
* (general) Move functions in headers into files, to be compiled into shared object files. Remove inline qualifier from functions. Let the compiler do the work.
2012-01-02lib: fix some strtoul() use casesUlrich Weber
...otherwise 4294967295 is not a valid value on 32bit systems
2012-01-02bgpd: justify checks for IPv4 class D/EDenis Ovsienko
* lib/prefix.h * IPV4_CLASS_DE(): make consistent with counterpart macros * bgp_packet.c * bgp_open_receive(): test using macro instead of ">=" * bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem
2011-12-18fix set never used warningsStephen Hemminger
(This patch was modified to leave calls to stream_getl() in place, they are necessary for the stream's internal pointer to advance to the correct position. -- Denis) Signed-off-by: Denis Ovsienko <infrastation@yandex.ru> Fix gcc warnings about varables that are set but never used. * bgpd/bgp_attr.c * cluster_unintern(): ret * transit_unintern(): ret * bgp_attr_default_intern(): attre * bgp_mp_reach_parse(): rd_high, rd_low * bgpd/bgp_route.c * bgp_announce_check_rsclient(): bgp * bgpd/bgp_zebra.c * zebra_read_ipv4(): ifindex * zebra_read_ipv6(): ifindex * bgpd/bgpd.c * bgp_config_write_peer(): filter * lib/distribute.c * distribute_list_all(): dist * distribute_list(): dist * distribute_list_prefix_all(): dist * distribute_list_prefix(): dist * lib/if_rmap.c * if_rmap(): if_rmap * lib/vty.c * vty_accept(): vty * lib/zclient.c * zclient_read(): ret * zebra/irdp_interface.c * if_group(): zi * zebra/rt_netlink.c * kernel_read(): ret, sock
2011-12-13bgpd: fix regression in ORF procesing (BZ#688)Denis Ovsienko
This issue has been pointed out by Lou Berger and Tim Browski. * bgp_packet.c * bgp_route_refresh_receive(): restore if() condition, which was broken by commit fdbc8e77c88f751924299d0bc752371d5cc31116
2011-12-13lib: add sockopt helper for setting IPV6_V6ONLY and use itDavid Lamparter
getaddrinfo returns a list of socket parameters for listening. it will contain both IPv4 and IPv6 listening sockets. unless we use IPV6_V6ONLY on the IPv6 ones, only the socket listed first will work. if the IPv4 one came first, the IPv6 one would get an "Address in use" error. this functionality was already present for bgpd and its listening sockets. as it is needed for vtys as well, make it a common helper. Conflicts: lib/sockunion.c
2011-12-13lib: put route_types.txt to real useDavid Lamparter
this replaces most occurences of routing protocol lists by preprocessor defines from route_types.h. the latter is autogenerated from route_types.txt by a perl script (previously awk). adding a routing protocol now is mostly a matter of changing route_types.txt and log.c. Conflicts: lib/route_types.awk
2011-12-13build: delete .cvsignore filesDenis Ovsienko
2011-12-13quagga: option "-z" ("--socket <path>") addedVyacheslav Trushkin
All daemons modified to support custom path to zserv socket. lib: generalize a zclient connection zclient_socket_connect added. zclient_socket and zclient_socket_un were hidden under static expression. "zclient_serv_path_set" modified.