summaryrefslogtreecommitdiff
path: root/bgpd
AgeCommit message (Collapse)Author
2006-08-27[bgpd] fix mtype in XFREE and NULL out freed pointerPaul Jakma
2006-08-27 Paul Jakma <paul.jakma@sun.com> * bgp_advertise.c: (bgp_sync_delete) fix mtype in XFREE. NULL out peer->hash after free, to be sure.
2006-08-06[bgpd] aspath_loop_check was broken, fix it and the aspath unit test code.Paul Jakma
2006-08-06 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_loop_check) Fix the typo-bug which essentially had disabled this check. Problem reported by Bartek Kania <mrbk@gnarf.org> in [quagga-users 7388]. * aspath_test.c: (validate) Fix the sense of the aspath_loop_check, which was the wrong way around and had actually been testing for aspath_loop_check to be buggy.
2006-07-27[bgpd] Potential bug#287 fix, peer_delete should NULL out freed buffersPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * bgpd.c: (peer_delete) Ensure freed buffers can not be accidently reused. A potential fix for bug #287.
2006-07-02[bgpd] Fix crash on shutdown of peerPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain bits of state from stop to start, as they may be used via peer references on clearing queues..
2006-05-23[bgpd] expand vty help for neighbor ... update-sourcePaul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion to make it clear it takes both address and ifname.
2006-05-12[bgpd] CID #4,#5,#9,#10, simplify aspath_print_vty usagePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.{c,h}: (aspath_print_vty) take a format string, so as to reduce burden on callers, all in bgp_route.c * bgp_route.c: (route_vty_out{,tmp}) Update to match aspath_print_vty, simplifying checks needed to get spacing right. CID #4,#5. ({damp,flap}_route_vty_out) Ditto, CID #9, #10
2006-05-12[bgpd] CID #6, remove useless NULL check, bgp_static_update_rsclientPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_static_update_rsclient) Remove useless NULL check, code already assumes bgp_static can not be NULL, fixes CID #6.
2006-05-12[bgpd] CID #7, remove useless NULL check, bgp_static_update_mainPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_static_update_main) Remove useless NULL check, code already assumes bgp_static can not be NULL, fixes CID #7.
2006-05-12[bgpd] Remove dead code in ORIGINATOR_ID packet forming codePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * bgp_attr.c: (bgp_packet_attribute) Remove dead code, Coverity CID #1
2006-05-08[bgpd] Bug #240, Fix route-server crash when static routes are configuredPaul Jakma
2006-05-08 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_afi_node_get) given table should never be NULL, check/assert this. (bgp_static_update) Bug #240. Rsclients should only be passed the static update if they are configured for the afi,safi.
2006-05-08[bgpd] CID#62 fix double-free, use-after-free in community_str2comPaul Jakma
2006-05-08 Paul Jakma <paul.jakma@sun.com> * bgp_community.c: (community_str2com) Coverity CID#62, fix double-free, use-after-free.
2006-05-04[bgpd] Fix bug where FSM can stay hung forever in Idle/ClrngPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (general) Fix logical bug in clearing, noted by Chris Caputo in [quagga-users 6728] - clearing depended on at least one route being added to workqueue, in order for workqueue completion function to restart FSM. However, if no routes are cleared, then the completion function never is called, it needs to be called manually if the workqueue didn't get scheduled. Finally, clearing is per-peer-session, not per AFI/SAFI, so the FSM synchronisation should be in bgp_clear_route_table. (bgp_clear_route_table) Wrong place for FSM/clearing synchronisation, move to.. (bgp_clear_route) FSM/clearing synchronisation should be here. If no routes were cleared, no workqueue scheduled, call the completion func to ensure FSM kicks off again.
2006-05-04[bgpd] bug #210: Enable crucial VPNv4 code which was disabledPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * (general) VPNv4 fixes. Certain VPNv4 code was not enabled. See bug #210. * bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be u_char really. * bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some VPNv4 code which inexplicably was ifdef'd out. comments from a tester on IRC suggest this fixes bug #210.
2006-03-30[bgpd] Fix infinite loop in community_str2comPaul Jakma
2006-03-30 Paul Jakma <paul.jakma@sun.com> * bgp_community.c: (community_gettoken) Unknown token should return NULL, to give a strong indication to callers that the token no longer can be parsed, otherwise callers looping on this function may have a hard time ending their loop. (community_str2com) While loop around community_gettoken appears to have been coded thinking that break statement would break from the while{}, hence it could never exit for unknown token case. Fix it to do..while, so it can use the NULL result from community_gettoken easily.
2006-03-30[bgpd] release peer specific clear queue in peer_freePaul Jakma
2006-03-22 Paul Jakma <paul.jakma@sun.com> * bgpd.c: (peer_free) release the per-peer workqueue when freeing the peer.
2006-03-30[bgpd] trivial: use a distinct memtype for struct bgp_synchronizePaul Jakma
2006-03-19 Paul Jakma <paul.jakma@sun.com> * memtypes.c: Add MTYPE_BGP_SYNCHRONISE. * bgp_advertise.c: Use a distinct memory type for struct bgp_synchronize.
2006-03-30[bgpd] Add 'show bgp memory' for stats on fixed-size allocations in bgpdPaul Jakma
2006-03-19 Paul Jakma <paul.jakma@sun.com> * bgpd/bgp_vty.c: Add includes to get several structs we want to provide usage statistics on. (show_bgp_memory_cmd) Show memory usage stats for various notable fixed size objects. Using mtype_stats_alloc and mtype_memstr recently added to memory.c. (bgp_show_summary) Report some additional stats specific to the given BGP instance and/or AFI/SAFI such as table counts, peers, rsclients and peer-groups. (bgp_vty_init) Install show_bgp_memory_cmd.
2006-03-30[bgpd] Include header dependency in bgp_nexthop.hPaul Jakma
2006-03-19 Paul Jakma <paul.jakma@sun.com> * bgp_nexthop.h: Include if.h as a dependent header, for struct connected.
2006-03-30[bgpd] rearrange some structs for less padding, stats for table/attrs.Paul Jakma
2006-03-12 Paul Jakma <paul.jakma@sun.com> * bgp_attr.h: (struct attr) rearrange fields to avoid wasted padding between them as much as possible. (attr_count,attr_unknown_count) export new functions to return number of counts of cached attributes. * bgp_attr.c: (attr_count,attr_unknown_count) new functions to return number of counts of cached attributes. * bgp_route.h: (struct bgp_info) rearrange fields to avoid wasted padding. * bgp_table.h: (struct bgp_table) Add a count field, of number of nodes in the table. (struct bgp_node) rearrange fields to avoid wasted padding between them, though I don't think there was any in this case. * bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count. (bgp_table_count) new function to access the table count.
2006-03-06[bgpd] Start off FSM again once clearing finishes.Paul Jakma
2006-03-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_clear_node_complete) Doh. When clearing is complete we need to kick off FSM again.
2006-02-21[bgpd] Add Clrng description to bgp summary state.Paul Jakma
2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description to state of peer while it's suppressed due to clearing.
2006-02-21[bgpd] Record afi/safi in bgp_table. Serialise peer clear with FSM.Paul Jakma
2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgpd.h: move the clear_node_queue to be peer specific. Add a new peer status flag, PEER_STATUS_CLEARING. * bgp_table.h: (struct bgp_table) Add fields to record afi, safi of the table. (bgp_table_init) Take afi and safi to create table for. * bgp_table.c: (bgp_table_init) record the afi and safi. * bgp_nexthop.c: Update all calls to bgp_table_init. * bgp_vty.c: ditto. * bgpd.c: ditto. * bgp_fsm.c: (bgp_timer_set) dont bring up a session which is clearing. * bgp_route.c: (general) Update all bgp_table_init calls. (bgp_process_{rsclient,main}) clear_node is serialised via PEER_STATUS_CLEARING and fsm now. (struct bgp_clear_node_queue) can be removed. struct bgp_node can be the queue item data directly, as struct peer can be kept in the new wq global user data and afi/safi can be retrieved via bgp_node -> bgp_table. (bgp_clear_route_node) fix to get peer via wq->spec.data, afi/safi via bgp_node->bgp_table. (bgp_clear_node_queue_del) no more item data to delete, only unlock the bgp_node. (bgp_clear_node_complete) only need to unset CLEARING flag and unlock struct peer. (bgp_clear_node_queue_init) queue attaches to struct peer now. record peer name as queue name. (bgp_clear_route_table) If queue transitions to active, serialise clearing by setting PEER_STATUS_CLEARING rather than plugging process queue, and lock peer while queue active. Update to pass only bgp_node as per-queue-item specific data.
2006-02-18[bgpd] trivial readability fixPaul Jakma
2006-02-18 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (bgp_announce_check) trivial, move declaration of two local variables into the only block where they are used, to aid the reader.
2006-02-18[bug #89] Fix leak of community when set community is usedPaul Jakma
2006-02-18 Paul Jakma <paul.jakma@sun.com> * bgp_routemap.c: (route_set_community) Quick, very hacky, fix for the set-community leak, bug #89. True fix will be to detangle the web of *_intern caching and provide saner object caching for Quagga, future work.
2006-02-05[bgpd] trivial fix for gcc warningpaul
2006-02-05 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_gettoken) fix gcc warning about possible uninitialised usage.
2006-02-05[bgpd] Fix peer prefix counts and make it slightly more robustpaul
2006-02-05 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: Add BGP_INFO_COUNTED to track whether prefix has been counted or not. * bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to centralise inc/dec of prefix-count, (bgp_rib_remove) Remove pcount decrement, use helper. (bgp_rib_withdraw) ditto, additionally use previous function too. (bgp_update_main) Use pcount helpers. (bgp_clear_route_node) ditto, aslo REMOVED routes don't need clearing.
2006-02-02[lib/workqueue] remove the useless 'delay' factor.paul
2006-02-02 Paul Jakma <paul.jakma@sun.com> * workqueue.h: (struct work_queue) Remove the delay field. It served no purpose and just introduced bad behaviour. Should be excised before its allowed to escape into 1.0. This removes need for the 'flood' and runs_since_clear fields. * workqueue.c: (general) excise delay factor between queue runs, hence the 'flood' crap too.. See above. * bgp_route.c: (bgp_{clear_node,process}_queue_init) delay field is removed from workqueue spec.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2006-01-17[zserv] fix up custom isisd and bgpd Zserv functions for new format.paul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * bgp_nexthop.c: (zlookup_read*) convert to new Zserv format. (zlookup_query_ipv6) ditto. (bgp_import_check) ditto. * isis_zebra.c: (isis_zebra_route_add_ipv4) fix for new zserv format.
2006-01-16[bgpd] add aspath_finish, static resource cleanup function.paul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (aspath_snmp_pathseg) move the static stream pointer out to file scope, so it can be freed. (aspath_finish) new function, free aspath resources. * bgp_aspath.h: (aspath_finish) export.
2006-01-16[bgpd] fix some leaks introduced in aspath rewrite.paul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_append_asns) XREALLOC can return NULL theoretically, take care not to lose the allocated data. (aspath_hash_alloc) aspath_dup already set the aspath string - fix leak. (aspath_parse) aspath_hash_alloc dupes the entire aspath, including segments, but we forgot to free the temporary assegment.
2006-01-10[bgpd] remove export of long defunct functionpaul
2006-01-10 Juris Kalnins <juris@mt.lv> * bgpd.h: (bgp_router_id_unset) ex-function, remove.
2005-11-23[bgp] Fix SEGV if empty path is confed-compared ([quagga-users 5968])paul
2005-11-23 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegments_parse) should be static 2005-11-23 Juergen Kammer <j.kammer@eurodata.de> * bgp_aspath.c: (aspath_cmp_left_confed) fix SEGV for case where one or both paths are empty.
2005-11-142005-11-14 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (rib_process) convert to new workqueue specs and shut up gcc, which complains about cast from void via function parameters, for some dumb reason. Do the cast inside the function instead. (rib_queue_qnode_del) ditto. (rib_queue_init) no need for the casts anymore.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* bgp_damp.c: (bgp_reuse_timer) struct bgp can be retrieved via the struct bgp_damp_info, no need to guess by using bgp_get_default().
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* bgp_packet.c: fix compilation when DEBUG is used.
2005-09-292005-09-29 Paul Jakma <paul.jakma@sun.com>paul
* configure.ac: Add the test for Solaris least-privileges. Set defines for whether capabilities are supported and whether of the linux or solaris variety. Add missing-prototypes, missing-declarations, char-subscripts and cast-qual warnings to default cflags, cause Hasso enjoys warnings, and we really should clean the remaining ones up. (ie isisd..). * (*/*main.c) Update the zebra_capabilities_t arrays in the various daemons to match the changes made in lib/privs.h. * zebra.h: Solaris capabilities requires priv.h to be included. * privs.{c,h}: Add support for Solaris Least-Privileges. privs.h: Reduce some of the abstract capabilities, which do not have rough equivalents on both systems. Rename the net related caps to _NET, as they should have been in first place. (zprivs_terminate) should take the zebra_privs_t as argument so that it can update change pointer. Add an additional privilege state, ZPRIVS_UNKNOWN. * privs.c: (various capability functions) Add Solaris privileges variants. (zprivs_state) Use privs.c specific generic types to represent various capability/privilege related types, so that each can be typedef'd as appropriate on each platform. (zprivs_null_state) static added, to hold the state the null method should report (should be raised by default, and LOWERED if zprivs_terminate has been called) (zprivs_state_null) Report back the zprivs_null_state. (cap_map) Make it able to map abstract capability to multiple system capabilities. (zcaps2sys) Map to abstract capabilities to multiple system privileges/capabilities. (zprivs_init) move capability related init to seperate function, zprivs_caps_init. (zprivs_terminate) ditto, moved to zprivs_caps_terminate. Set the change_state callback to the NULL state, so the user can continue to run and use the callbacks.
2005-09-102005-09-10 Paul Jakma <paul.jakma@sun.com>paul
* Makefile.am: bgpd shouldn't list libgp's sources as its own. Use LDADD. * bgp_aspath.h: (struct assegment) New struct, abstract representation of a list of AS_PATH segments and the contained ASNs. (struct aspath) Remove the raw-data related fields, reference the abstract struct assegment instead. Remove several other computed fields, it's just a headache to maintain them and they're cheap to compute from struct assegment. (aspath_parse) parse a stream, not a pointer to raw data. (aspath_count_{hops,confeds,size}) helpers to access information formerly directly contained in struct aspath. (aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants to be able to output hex representation of raw data. * bgp_aspath.c: (general) partial-rewrite. Store aspath data as an abstract singly-linked list of abstract segments, rather than storing the raw data, and parsing it each and every time. Remove several count/size fields which are cheap to compute from the abstract segment structure. (global) Include stream.h, needed for aspath_parse, and others. Couple of helper macros added. (struct assegment_header) Just the header, and only the header. (assegment_data_{new,free}) convenience functions for AS_SEG_DATA allocation, the dynamic, per-segment array of ASNs. (assegment_{new,free,free_all,dup,dup_all}) convenience functions for creating struct assegments. The _all forms will follow the entire chain of segments from the given segment. (assegment_prepend_asns) new function, prepend an ASN N times to segment. (assegment_append_asns) Append a list (array) of ASNs to segment. (int_cmp) convenience function for the aspath hash. (assegment_normalise) new function. Normalise the given segment chain to meet expectations of Quagga, and to eliminate differing raw representations of the same paths. Merge 'runs' of SEQUENCEs into one segment as our internal segment is not limited by the protocol AS_PATH segment length. Sort ASNs in SETs. (aspath_new) Take void argument to quell warnings. Use the assegment convenience functions. (assegment_count_{asns,confeds,hops}) new functions to compute at runtime values previously held in struct aspath. (aspath_size) ditto. (aspath_make_str_count) rewritten to stringify new representation, and to be slightly easier to understand hopefully. (aspath_str_update) convenience function, update the aspath str. Should investigate removing maintained string from struct aspath, just run-time compute it, as per other fields. It's just a maintenance headache, would save noticeable amount of RAM with possibly not much extra run-time cost. (aspath_dup) use the assegment dup functions. (aspath_hash_alloc) Take void * argument to satisfy gcc. Use the proper helper functions to dup data. (assegments_parse) new function. parse raw AS_PATH data into struct assegments. Normalise and return the head of the list. (aspath_parse) Parse a stream, not pointer to raw data and use assegments_parse to do it. (assegment_data_put) Write out a single segment data in protocol form to stream. (assegment_header_put) ditto but for segment header. (aspath_put) new function. As per previous but for an entire struct aspath. (aspath_snmp_pathseg) wrapper around aspath_put for bgp_snmp.c. Uses a static buffer sadly. (aspath_aggregate_as_set_add) rewritten to use assegments. (aspath_aggregate) ditto (aspath_{firstas,loop,private_as}_check) ditto (aspath_{merge,prepend,add_one_as}) ditto (aspath_cmp_left{_confed}) ditto (aspath_delete_confed_seq) ditto, plus fixed to properly delete all leading confed segments. (aspath_as_add) Just use assegment_append_asns. (aspath_segment_add) updated to use assegments. (enum as_token) Add values for confeds (aspath_gettoken) Add support for confeds (aspath_str2aspath) ditto (aspath_key_make) updated to use as_segments. Also, add segment type into the hash value as appropriate. (aspath_cmp) updated to use as_segments. (aspath_print) don't segfault on NULL argument. * bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream now. No need for manual forwarding of stream. (bgp_packet_attribute) empty aspath is now denoted by NULL segment field, length is gone. Use aspath_size() to determine size. (bgp_attr_init) Fix declaration, explicitely specify void arg. (bgp_dump_routes_attr) Use aspath_size() to determine size. * bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions. (bgp_rib_withdraw) remove unused variable. Use aspath_count_hops. * bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use aspath_snmp_pathseg to get the representation.
2005-09-092005-09-10 Paul Jakma <paul.jakma@sun.com>paul
* bgp_vty.c: (bgp_vty_init) gcc 4 compile fix. static function declarations shouldn't be inside functions. * bgp_dump.c: (bgp_dump_interval_add) ditto.
2005-08-26 * bgp_route.c: Third (?) attempt to fix best selection breakagehasso
introduced long time ago with route server patch. Hopefully it's last case to fix - route-server client not in peer group. [backport candidate]
2005-08-222005-08-22 Hugo Santos <hsantos@av.it.pt>paul
* bgp_vty.c: (general) Add support for BGP IPv6 Multicast SAFI commands and BGP_IPV6M_NODE.
2005-08-222005-08-22 Paul Jakma <paul.jakma@sun.com>paul
* bgp_route.h: (struct bgp_info) add a new flag, BGP_INFO_REMOVED. BGP_INFO_VALID is already overloaded, don't care to do same thing to STALE or HISTORY. * bgpd.h: (BGP_INFO_HOLDDOWN) Add INFO_REMOVED to the macro, as a route which should generally be ignored. * bgp_route.c: (bgp_info_delete) Just set the REMOVE flag, rather than doing actual work, so that bgp_process (called directly, or indirectly via the scanner) can catch withdrawn routes. (bgp_info_reap) Actually remove the route, what bgp_info_delete used to do, only for use by bgp_process. (bgp_best_selection) reap any REMOVED routes, other than the old selected route. (bgp_process_rsclient) reap the old-selected route, if appropriate (bgp_process_main) ditto (bgp_rib_withdraw, bgp_rib_remove) make them more consistent with each other. Don't play games with the VALID flag, bgp_process is async now, so it didn't make a difference anyway. Remove the 'force' argument from bgp_rib_withdraw, withdraw+force is equivalent to bgp_rib_remove. Update all its callers. (bgp_update_rsclient) bgp_rib_withdraw and force set is same as bgp_rib_remove. (route_vty_short_status_out) new helper to print the leading route-status string used in many command outputs. Consolidate. (route_vty_out, route_vty_out_tag, damp_route_vty_out, flap_route_vty_out) use route_vty_short_status_out rather than duplicate. (route_vty_out_detail) print state of REMOVED flag. (BGP_SHOW_SCODE_HEADER) update for Removed flag.
2005-08-03 * bgp_routemap.c: Revert part of leaking communities fix commited inhasso
2005-05-27. While ecommunity fix seems to be correct, community case isn't. Fixes bugzilla #209. [backport candidate]
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
2005-06-152005-06-15 Paul Jakma <paul.jakma@sun.com>paul
* bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its possible to terminate bgpd before workqueues were setup, causing an abort/crash. Reported by Ashish Mehta of Sun.
2005-06-012005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us add work_queues for bgp_process. * bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. Add bgp_info_{lock,unlock} helper functions. Add bgp_info_{add,delete} helpers, to remove need for users managing locking/freeing of bgp_info and bgp_node's. * bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of nodes. * bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock peer reference as appropriate. * bgpd/bgp_damp.c: Remove its internal prototypes for bgp_info_delete/free. Just use bgp_info_delete. * bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers. (struct peer) Add reference count 'lock' (peer_lock,peer_unlock) New helpers to take/release reference on struct peer. * bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting and balance how references are taken and released. (bgp_advertise_free) release bgp_info reference, if appropriate (bgp_adj_out_free) unlock peer (bgp_advertise_clean) leave the adv references alone, or else call bgp_advertise_free cant unlock them. (bgp_adj_out_set) lock the peer on new adj's, leave the reference alone otherwise. lock the new bgp_info reference. (bgp_adj_in_set) lock the peer reference (bgp_adj_in_remove) and unlock it here (bgp_sync_delete) make hash_free on peer conditional, just in case. * bgpd/bgp_fsm.c: (general) document that the timers depend on bgp_event to release a peer reference. (bgp_fsm_change_status) moved up the file, unchanged. (bgp_stop) Decrement peer lock as many times as cancel_event canceled - shouldnt be needed but just in case. stream_fifo_clean of obuf made conditional, just in case. (bgp_event) always unlock the peer, regardless of return value of bgp_fsm_change_status. * bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs along with a comment on it. * bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup some of the resource management around bgp_info. Refcount peer. Add workqueues for bgp_process and clear_table. (bgp_info_new) make static (bgp_info_free) Ditto, and unlock the peer reference. (bgp_info_lock,bgp_info_unlock) new exported functions (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, taking care of reference counts. (bgp_info_delete) do the opposite of bgp_info_add. (bgp_process_rsclient) Converted into a work_queue work function. (bgp_process_main) ditto. (bgp_processq_del) process work queue item deconstructor (bgp_process_queue_init) process work queue init (bgp_process) call init function if required, set up queue item and add to queue, rather than calling process functions directly. (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts (bgp_rib_withdraw) ditto (bgp_update_rsclient) let bgp_info_add manage refcounts (bgp_update_main) ditto (bgp_clear_route_node) clear_node_queue work function, does per-node aspects of what bgp_clear_route_table did previously (bgp_clear_node_queue_del) clear_node_queue item delete function (bgp_clear_node_complete) clear_node_queue completion function, it unplugs the process queues, which have to be blocked while clear_node_queue is being processed to prevent a race. (bgp_clear_node_queue_init) init function for clear_node_queue work queues (bgp_clear_route_table) Sets up items onto a workqueue now, rather than clearing each node directly. Plugs both process queues to avoid potential race. (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage bgp_info refcounts. (bgp_static_update_rsclient) ditto (bgp_static_update_main) ditto (bgp_static_update_vpnv4) ditto, remove unneeded cast. (bgp_static_withdraw) see bgp_static_withdraw_rsclient (bgp_static_withdraw_vpnv4) ditto (bgp_aggregate_{route,add,delete}) ditto (bgp_redistribute_{add,delete,withdraw}) ditto * bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer reference (peer_rsclient_unset_vty) ditto, but unlock same reference * bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime of struct peer. (peer_lock,peer_unlock) peer refcount helpers (peer_new) add initial refcounts (peer_create,peer_create_accept) lock peer as appropriate (peer_delete) unlock as appropriate, move out some free's to peer_free. (peer_group_bind,peer_group_unbind) peer refcounting as appropriate. (bgp_create) check CALLOC return value. (bgp_terminate) free workqueues too. * lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and MTYPE_BGP_CLEAR_NODE_QUEUE
2005-05-28Sync bgpd and ripd set_metric_addsub_cmd commands. Fixes bugzilla #192.hasso
[backport candidate]
2005-05-27 * bgp_routemap.c: Stop leaking communities.hasso
Fixes bugzilla #89. [backport candidate]
2005-05-26 * bgpd.c: Deleting bgp->rsclient list needs fix similar to pree-groupshasso
deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient lists. [backport candidate]