| Age | Commit message (Collapse) | Author |
|---|
|
2003-10-18 Lorenzo Colitti <lorenzo@ripe.net>
* bgpd/bgp_attr.c: (bgp_dump_routes_attr) Dont dump IPv4 nexthop
for IP. Dump MP_NLRI attr with IPv6 next-hop for AF_INET6 address
family prefixes. Accept prefix as argument.
* bgpd/bgp_attr.c: modify bgp_dump_routes_attr declaration.
* bgpd/bgp_dump.c: (bgp_dump_routes_entry) Modify calls to
bgp_dump_routes_attr.
(bgp_dump_common) Go by the family of the peering socket, not
configured address family when dumping peering information.
Add HAVE_IPV6 conditionals, eg missing from previous bgp interval
patch.
|
|
* bgpd/bgp_dump.{c,h}: (bgp_dump_interval_add) Dump at discrete
fixed intervals rather than fixed intervals from startup time.
(bgp_dump_interval_func) Dont return immediately if file cant be
openeded, but reschedule interval dumps, even - admin might
fix problem in meantime. Close the dump file in between intervals.
(bgp_dump_init) account for MSG header when initialising stream
size.
|
|
* lib/zebra.h: define UINT32_MAX for those systems which do not
provide it.
* bgp_attr.h: define BGP_MED_MAX.
* bgp_route.c: update defines/constants to BGP_MED_MAX.
* bgp_routemap.c: ditto. clean up route_match_metric_compile
slightly to avoid unneccesary XMALLOC.
|
|
* zebra/connected.c: revert the 'generic PtP' patch as it causes
far too many problems. People who use FreeSWAN should investigate
native linux ipsec.
* zebra/rt_netlink.c: ditto
* lib/if.c: ditto
* ripd/ripd.h: ditto
* ripd/ripd.c: ditto
* ripd/rip_interface.c: ditto
* ospfd/ospfd.c: ditto
* ospfd/ospf_snmp.c: ditto
* bgpd/bgp_nexthop.c: ditto
|
|
* bgpd/bgp_route.c: Unrevert the revert of the possible first fix
for maximum-prefix.
|
|
* bgpd/bgp_route.c: More work on bgp maximum prefix support
|
|
* bgpd/bgp_routemap.c: attr->med is type u_in32_t, should be
compared with UINT32_MAX
* ospfd/ospfd.c: remove redundant assert
* zebra/rtadv.c: add missing include for zebra/rib.h
|
|
* bgpd/bgp_route.c: fix maximum prefix comparison
|
|
* zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines ->
QUAGGA_{USER,GROUP}
* bgpd/bgp_main.c: ditto
* ospf6d/ospf6_main.c: ditto
* ospfd/ospf_main.c: ditto
* ripd/rip_main.c: ditto
* ripngd/ripng_main.c: ditto
* zebra/main.c: ditto
|
|
* bgpd/bgp{_fsm.c,_vty.c,d.c,d.h}: Add support for "bgp
log-neighbor-changes" command.
|
|
2003-08-12 Paul Jakma <paul@dishone.st>
* Makefile.am: redhat/zebra.* -> redhat/quagga.*
* configure.ac: Bump autoconf prerequisite to 2.53.
dist name zebra -> quagga.
general Zebra -> Quagga where appropriate (ie not zebra daemon).
User and group zebra->quagga.
s/ZEBRA\(_VERSION\)/QUAGGA\1/.
* bgpd/bgp_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/command.c: Update banners and s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/print_version.c: ditto
* lib/version.h: s/ZEBRA\(_VERSION\)/QUAGGA\1/ and bump version.
Change ZEBRA_URL.
* lib/smux.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/vty.h: Change Zebra.conf to Quagga.conf (integrated file)
* ospf6d/ospf6{,_main}.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* ospfd/ospf_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
|
|
* bgp_route{,map}.c: Extend 'set ip next-hop' in route-maps with
ability to specify 'peer-address' rather than IP.
|
|
* Add missing 'i' to getopts, short form of --pid_file.
see http://bugzilla.quagga.net/show_bug.cgi?id=25
|
|
* bgpd/bgp_route.c: route server passes routes which may have
no-export community
|
|
* bgpd/bgp_filter.c: "show ip as-path-access-list"
|
|
* bgp_vty.c: install the neighbor_set_peer_group_cmd,
neighbor_soft_reconfiguration_cmd and neighbor_unsuppress_map_cmd
family of commands into the VPNv4 address family config node.
|
|
* Fix lib/smux.c's reliance on daemons exporting struct
thread_master *master.
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
* bgpd/ChangeLog: Update (wasnt commited with the fix)
|
|
* bgp_clist.c (community_list_delete): honour deny statements
|
|
* (bgp_clist.c): Run it through indent -nut (all indentation to
be spaced, get rid of mix of tabs and spaces)
|
|
* Merge of zebra privileges
|
|
|
|
Should recognise the absence of an interval now and schedule one-shot dump.
hopefully.
|
|
|
|
http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch
Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes
a lot of errors with "match ..." and "set ..." commands when using vtysh.
|
|
Add ospfclient to ospfclient/.cvsignore
|
|
moved definition of the various socket paths from the
per daemon header files into configure.ac. it will set the paths to
be in the directory specified by --localstatedir=<prefix> or
otherwise will try to guess as best it can ( a la pid file path
detection - which probably should try reference ${prefix} too).
the present hardcoded socket path, /tmp, isnt really correct. should
be in /var somewhere really.
|
|
Developers working with the repository should have the appropriate tools.
Out-of-sync files cause far too many problems with users as well as auto*
scripts not being half as portable across systems as they ought to be.
make-dist exists for a reason.
Todo: make the CVS snapshot script do make-dist, and use the resulting
tarball as the snapshot.
|
|
* Sync to Zebra CVS
* Fix lib/thread.h leak
* Fix small Opaque LSA leak
* Do not configure OSPF interfaces for secondary addresses
* vtysh fixes from Hasso
* Dave Watson's missing ntohs fix
|
|
* sync to latest zebra CVS
* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions
|
|
|
|
No doubt builds will now break for everyone. (works here - autoconf 2.13)
|
|
[zebra 17290] [PATCHES] - Fixes for problems in 0.93b
portfix patch
|
|
|
|
|
|
|
|
|
