| Age | Commit message (Collapse) | Author |
|---|
|
no particular afi/safi configured.
[backport candidate]
|
|
work again.
|
|
|
|
how much storage is required.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
transparent-nexthop" commands.
[merge from GNU Zebra]
|
|
[merge from GNU Zebra]
|
|
community-list cleanup.
[merge from GNU Zebra]
|
|
-> "disable-connected-check".
[merge from GNU Zebra]
|
|
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
|
|
capability route-refresh" commands. Route refresh capability is sent
anyway now. Preserve dummy deprecated commands.
[merge from GNU Zebra]
|
|
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor
version" command as deprecated.
[merge from GNU Zebra]
|
|
maximum-prefix limit" feature support.
[merge from GNU Zebra]
|
|
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
|
|
* buffer.h: Fix comment on buffer_getstr to reflect that it now
uses XMALLOC.
* buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc.
* filter.c: (access_list_remark,ipv6_access_list_remark) Use
argv_concat instead of buffer_getstr.
* if.c: (interface_desc) Use argv_concat instead of buffer_getstr.
* plist.c: (ip_prefix_list_description,ipv6_prefix_list_description)
Use argv_concat instead of buffer_getstr.
* bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead
of buffer_getstr.
* bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string
returned by buffer_getstr.
(bgp_show_community) Must use XFREE instead of free on string
returned by buffer_getstr.
* bgp_routemap.c: (set_community) Must use XFREE instead of free
on string returned by buffer_getstr.
* bgp_vty.c: (neighbor_description) Use argv_concat instead of
buffer_getstr.
|
|
if old one is flaged as BGP_INFO_ATTR_CHANGED.
|
|
configured or not. Being not configured is even better reason to
do it.
|
|
* bgp_packet.c: (bgp_write) set socket to nonblock while writing
this should be generalised. See bugzilla #102. Fix supplied by
wawa@yandex-team.ru (Vladimir Ivanov).
|
|
size_t being used for streams. Perhaps cast to unsigned long before
printf? Surely that's big enough even if size_t could be larger in
theory.
(no changelog, since only comment changes)
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* bgp_nexthop.c: collapse bgp_connected_ipvX, bgp_nexthop_cache_ipvX
and cache{1,2}.. into arrays of tables and hence collapse
bgp_scan_ipv{4,6} into a single bgp_scan function. Tested, though
a long time ago (and this change was hand-merged).
|
|
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE
capabilities (that were used only in bgpd/bgp_route.c and are now
removed). Also remove some other fields that were not being
used at all.
* vty.c: (vty_execute) Do not test for obsolete status values VTY_START
and VTY_CONTINUE.
(vty_read) Remove calls to vty->output_func since that was part
of the VTY_CONTINUE infrastructure that has been removed.
(vty_flush) Remove code to support VTY_START and VTY_CONTINUE.
(vty_close) Remove code to cancel vty->t_output thread, since that
thread was never actually used.
* bgp_route.c: Remove all code related to VTY_CONTINUE; this feature
is deprecated because the output did not represent a single point
in time. All output needs to be generated inline and buffered
by the library code.
(route_vty_out,route_vty_out_tag,damp_route_vty_out,
flap_route_vty_out) Remove code to count number of lines of output,
since this was only useful for VTY_CONTINUE behavior.
(bgp_show_callback) Removed.
(bgp_show_table) Remove hooks for VTY_CONTINUE callback support.
As a result, there's a new output_arg argument to this function.
Make function static.
(bgp_show) Make function static and add a new output_arg argument.
Change all functions that call bgp_show or bgp_show_table to
pass the new output_arg argument (that used to be passed inside
vty->output_arg).
* bgp_mplsvpn.c: Remove declarations of functions defined in
bgp_route.c; these declarations belong in bgp_route.h.
* bgp_route.h: Declare 3 global functions used in both bgp_route.c
and in bgp_mplsvpn.c.
|
|
with CVS trees.
|
|
* {bgpd,bgp_attr}.c: size_t printf format should be ld.
|
|
* Update with fix in debian bug id 222930.
* bgp_main.c: Add ZCAP_RAW, needed to bind to interfaces.
bgp_network.c: (....) raise/lower privs around call to
SO_BINDTODEVICE sockopt.
|
|
ripd might need some more testing though.
|
|
|
|
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
* (global) more const'ification and fixups of types to clean up code.
* bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect,
should use something like the VTY_GET_INTEGER macro, but without
the vty_out bits..
* bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE
(no_set_aggregator_as) ditto.
* bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is
returned, add comments about troublesome return value.
|
|
|
|
|
|
|
|
(at Technical University of Madrid as part of Euro6ix Project)
Enhanced Route Server functionality and Route-Maps:
* bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to
support rs-clients. A 'struct bgp_table *rib' has been added to the
first (to mantain a separated RIB for each rs-client) and two new
route-maps have been added to the last (for import/export policies).
Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX},
PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT.
* bgpd/bgpd.c: Modified the functions that create/delete/etc peers in
order to consider the new fields included in 'struct peer' for
supporting rs-clients, i.e. the import/export route-maps and the
'struct bgp_table'.
* bgpd/bgp_route.{ch}: Modified several functions related with
receiving/sending announces in order to support the new Route Server
capabilities.
Function 'bgp_process' has been reorganized, creating an auxiliar
function for best path selection ('bgp_best_selection').
Modified 'bgp_show' and 'bgp_show_route' for displaying information
about any RIB (and not only the main bgp RIB).
Added commands for displaying information about RS-clients RIBs:
'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient
(A.B.C.D|X:X::X:X) X:X::X:X/M', etc
* bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two
new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT})
and 'void *owner' which points to 'struct bgp' or 'struct peer' which
owns the table.
When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set.
* bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and
'no neighbor ... route-server-client' now not only set/unset the flag
PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct
bgp_table' of the peer. Special actions are taken for peer_groups.
Command 'neighbor ... route-map WORD (in|out)' now also supports two
new kinds of route-map: 'import' and 'export'.
Added commands 'clear bgp * rsclient', etc. These commands allow a new
kind of soft_reconfig which affects only the RIB of the specified
RS-client.
Added commands 'show bgp rsclient summary', etc which display a
summary of the rs-clients configured for the corresponding address
family.
* bgpd/bgp_routemap.c: A new match statement is available,
'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in
import/export route-maps, and it matches when the peer who announces
(when used in an import route-map) or is going to receive (when used
in an export route-map) the route is the same than the one specified
in the statement.
For peer-groups the statement matches if the specified peer is member
of the peer-group.
A special version of the command, 'match peer local', matches with
routes originated by the Route Server (defined with 'network ...',
redistributed routes and default-originate).
* lib/routemap.{ch}: Added a new clause 'call NAME' for use in
route-maps. It jumps into the specified route-map and when it returns
the first route-map ends if the called RM returns DENY_MATCH, or
continues in other case.
|
|
Maybe remove it at all?
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
|
|
Merge of GNU Zebra cvs2svn changesets r799, r800 and r807.
* bgp_dump.c: (bgp_dump_attr) cleanup. return status code. check
attributes present before printing.
* bgp_dump.c: update bgp_dump_attr prototype.
* bgp_packet.c: (bgp_update_receive) init attrstr. check status
of bgp_dump_attr. Log end-of-rib UPDATEs.
|
|
|
|
* bgp_packet.c: (bgp_collision_detect) Send NOTIFY on new socket
if that is connection we're closing.
(bgp_read) invalid marker check applies to KEEPALIVE too.
* bgp_route.c: Ignore multicast NRLI, dont send NOTIFY.
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
