summaryrefslogtreecommitdiff
path: root/bgpd
AgeCommit message (Collapse)Author
2012-04-09Merge branch 'quagga' into google-bgp-multipathAvneesh Sachdev
Conflicts: bgpd/bgp_route.c
2012-03-27bgpd: bgp_attr_flags_diagnose shouldn't assertPaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_flags_diagnose) debug code for error-handling paths probably shouldn't assert, instead it should just log that there was no problem.
2012-03-27bgpd: attr_parse call to attr_malformed should deal with PROCEED error casePaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_parse) the invalid flag check call to bgp_attr_malformed is pretty useless if it doesn't actually allow for the PROCEED non-error case.
2012-03-27bgpd: Fix silly mistake in bgp_attr_flag_invalidPaul Jakma
* bgp_attr.c: (bgp_attr_flag_invalid) flags is meant to be masked off with the mask variable...
2012-03-25bgpd: malformed attribute error that can still proceed should fixup getpPaul Jakma
* bgp_attr.c: (bgp_attr_malformed) When a malformed attribute error can be ignored, and BGP message processing may still proceed, the stream getp should be adjusted to the end of the attribute - the caller may not have consumed all the attribute. Problem noted by Martin Winter in bug 678. Also, rename the 'startp' local to 'notify_datap', for clarity.
2012-03-05Merge remote-tracking branch 'quagga-gnu.org/master'Paul Jakma
2012-03-04bgpd: Open option parse errors don't NOTIFY, resulting in abort & DoSPaul Jakma
* bgp_packet.c: (bgp_open_receive) Errors from bgp_open_option_parse are detected, and the code will stop processing the OPEN and return. However it does so without calling bgp_notify_send to send a NOTIFY - which means the peer FSM doesn't get stopped, and bgp_read will be called again later. Because it returns, it doesn't go through the code near the end of the function that removes the current message from the peer input streaam. Thus the next call to bgp_read will try to parse a half-parsed stream as if it were a new BGP message, leading to an assert later in the code when it tries to read stuff that isn't there. Add the required call to bgp_notify_send before returning. * bgp_open.c: (bgp_capability_as4) Be a bit stricter, check the length field corresponds to the only value it can be, which is the amount we're going to read off the stream. And make sure the capability flag gets set, so callers can know this capability was read, regardless. (peek_for_as4_capability) Let bgp_capability_as4 do the length check.
2012-02-28bgpd: Move up flag-check calls, parcel up attr-parser args, and other cleanupsPaul Jakma
* bgp_attr.h: (struct bgp_attr_parser_args) Attribute parsing context, containing common arguments. * bgp_attr.c: (general) Move the bgp_attr_flag_invalid flag-check calls up, out of each individual attr parser function, to be done once in attr_parse. Similarly move the calculation of the 'total' attribute length field up to attr_parse. Bundle together common arguments to attr-parsing functions and helpers into (struct bgp_attr_parser_args), so it can be passed by reference down the stack & also de-clutter the argument lists & make it easier to add/modify the context for attr-parsing - add local const aliases to avoid modifying body of code too much. This also should help avoid cut & paste errors, where calls to helpers with hard-coded attribute types are pasted to other functions but the code isn't changed. (bgp_attr_flags_diagnose) as above. (bgp_attr_flag_invalid) as above. (bgp_attr_{origin,aspath,as4_path,nexthop,med,local_pref,atomic}) as above. (bgp_attr_{aggregator,as4_aggregator,community,originator_id}) as above (bgp_attr_{cluster_list,ext_communities},bgp_mp_{un,}reach_parse) as above (bgp_attr_unknown) as above. (bgp_attr_malformed) as above. Also, startp and length have to be special-cased, because whether or not to send attribute data depends on the particular error - a separate length argument, distinct from args->length, indicates whether or not the attribute data should be sent in the NOTIFY. (bgp_attr_aspath_check) Call to bgp_attr_malformed is wrong here, there is no attribute parsing context - e.g. the 'flag' argument is unlikely to be right, remove it. Explicitly handle the error instead. (bgp_attr_munge_as4_attrs) Flag argument is pointless. As the comment notes, the check here is pointless as AS_PATH presence already checked elsewhere. (bgp_attr_parse) Do bgp_attr_flag_invalid call here. Use (struct bgp_attr_parser_args) for args to attr parser functions. Remove out-of-context 'flag' argument to as4 checking functions.
2012-02-28bgpd: consolidate attribute flag checksPaul Jakma
* bgpd/bgp_attr.c: (attr_flags_values []) array of required flags for attributes, EXTLEN & PARTIAL masked off as "dont care" as appropriate. (bgp_attr_flag_invalid) check if flags may be invalid, according to the above table & RFC rules. (bgp_attr_*) Use bgp_attr_flag_invalid. (bgp_attr_as4_aggregator) ditto, also take startp argument for the NOTIFY data. (bgp_attr_parse) pass startp to bgp_attr_as4_aggregator
2012-01-23bgpd: Addition of ipv6 network command in Multicast address family mode.G.Balaji
The patch adds the ipv6 network command in the BGP multicast address family mode.
2012-01-23bgpd: IPv6 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-23bgpd: IPv4 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-09bgpd: reinstate zlookup checks, required for BGP without zebraPaul Jakma
* bgp_nexthop.c: The nexthop lookup cache has to return success for queried nexthops if bgpd isn't connected to zebra, or else BGP without zebra doesn't work.
2012-01-08bgpd: Fix incorrect attribute type code in call to bgp_attr_malformedPaul Jakma
2012-01-08bgpd: Improve flag error messages in bgp_attr_aspathPaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_aspath) error message could be misleading, clearly log what flag was incorrect. (Problem noted in "bgpd: fix error message in bgp_attr_aspath()" in Quagga-RE)
2012-01-08bgpd: rewrite attr flag error loggingDenis Ovsienko
* bgp_attr.c * attr_flag_str: new message list * bgp_attr_flags_diagnose(): new function, implements previously added error logging in a generic way * bgp_attr_origin(): use bgp_attr_flags_diagnose() * bgp_attr_nexthop(): ditto * bgp_attr_med(): ditto * bgp_attr_local_pref(): ditto * bgp_attr_atomic(): ditto * bgp_attr_originator_id(): ditto * bgp_attr_cluster_list(): ditto * bgp_mp_reach_parse(): ditto * bgp_mp_unreach_parse(): ditto
2012-01-08bgpd: improve "show ip bgp scan detail"Denis Ovsienko
* bgp_nexthop.c (show_ip_bgp_scan_tables): access proper structure field in AF_INET6 case, handle ifindex NH type properly
2012-01-08bgpd: dismiss some zlookup checksDenis Ovsienko
bgp_nexthop_onlink(): zlookup is not used here at all bgp_nexthop_lookup_ipv6(): rely on the detection performed by "query" function (this also changes the fallback value to 0), reorder if-block bgp_nexthop_lookup(): idem
2012-01-08bgpd: add "show ip bgp scan detail" commandDenis Ovsienko
* bgp_nexthop.c: (show_ip_bgp_scan) transform into show_ip_bgp_scan_tables(), which uses inet_ntop() and can dump nexthops on request; (show_ip_bgp_scan_detail_cmd) new function
2012-01-08bgpd: touch nexthop handling codeDenis Ovsienko
bgp_nexthop_lookup_ipv6(): declare variables where they are actually used, drop no-op initialization (the field is already 0) bgp_nexthop_lookup(): ditto bgp_nexthop_check_ebgp(): rename to bgp_nexthop_onlink() bgp_nexthop_cache_changed(): rename to bgp_nexthop_cache_different()
2012-01-06general: remove inline qualifiers and move in-header functions to objectsPaul Jakma
* (general) Move functions in headers into files, to be compiled into shared object files. Remove inline qualifier from functions. Let the compiler do the work.
2012-01-02lib: fix some strtoul() use casesUlrich Weber
...otherwise 4294967295 is not a valid value on 32bit systems
2012-01-02bgpd: justify checks for IPv4 class D/EDenis Ovsienko
* lib/prefix.h * IPV4_CLASS_DE(): make consistent with counterpart macros * bgp_packet.c * bgp_open_receive(): test using macro instead of ">=" * bgp_route.c * bgp_update_rsclient(): idem * bgp_update_main(): idem
2011-12-18fix set never used warningsStephen Hemminger
(This patch was modified to leave calls to stream_getl() in place, they are necessary for the stream's internal pointer to advance to the correct position. -- Denis) Signed-off-by: Denis Ovsienko <infrastation@yandex.ru> Fix gcc warnings about varables that are set but never used. * bgpd/bgp_attr.c * cluster_unintern(): ret * transit_unintern(): ret * bgp_attr_default_intern(): attre * bgp_mp_reach_parse(): rd_high, rd_low * bgpd/bgp_route.c * bgp_announce_check_rsclient(): bgp * bgpd/bgp_zebra.c * zebra_read_ipv4(): ifindex * zebra_read_ipv6(): ifindex * bgpd/bgpd.c * bgp_config_write_peer(): filter * lib/distribute.c * distribute_list_all(): dist * distribute_list(): dist * distribute_list_prefix_all(): dist * distribute_list_prefix(): dist * lib/if_rmap.c * if_rmap(): if_rmap * lib/vty.c * vty_accept(): vty * lib/zclient.c * zclient_read(): ret * zebra/irdp_interface.c * if_group(): zi * zebra/rt_netlink.c * kernel_read(): ret, sock
2011-12-13bgpd: fix regression in ORF procesing (BZ#688)Denis Ovsienko
This issue has been pointed out by Lou Berger and Tim Browski. * bgp_packet.c * bgp_route_refresh_receive(): restore if() condition, which was broken by commit fdbc8e77c88f751924299d0bc752371d5cc31116
2011-12-13lib: add sockopt helper for setting IPV6_V6ONLY and use itDavid Lamparter
getaddrinfo returns a list of socket parameters for listening. it will contain both IPv4 and IPv6 listening sockets. unless we use IPV6_V6ONLY on the IPv6 ones, only the socket listed first will work. if the IPv4 one came first, the IPv6 one would get an "Address in use" error. this functionality was already present for bgpd and its listening sockets. as it is needed for vtys as well, make it a common helper. Conflicts: lib/sockunion.c
2011-12-13lib: put route_types.txt to real useDavid Lamparter
this replaces most occurences of routing protocol lists by preprocessor defines from route_types.h. the latter is autogenerated from route_types.txt by a perl script (previously awk). adding a routing protocol now is mostly a matter of changing route_types.txt and log.c. Conflicts: lib/route_types.awk
2011-12-13build: delete .cvsignore filesDenis Ovsienko
2011-12-13quagga: option "-z" ("--socket <path>") addedVyacheslav Trushkin
All daemons modified to support custom path to zserv socket. lib: generalize a zclient connection zclient_socket_connect added. zclient_socket and zclient_socket_un were hidden under static expression. "zclient_serv_path_set" modified.
2011-12-13bgpd: implement 'match probability' in route-mapsVyacheslav Trushkin
New clause 'match probability <percentage value>' was added in route-maps (bgpd/bgp_routemap.c modified).
2011-12-13bgp: use VTY_GET_INTEGER_RANGE() in bgp_clear()Ulrich Weber
Second patch replaces "VTY_GET_LONG ("AS", as_ul, arg);" by "VTY_GET_INTEGER_RANGE ("AS", as, arg, 1, BGP_AS4_MAX);" as done in all other code, which parses AS numbers.
2011-12-07bgpd: cleanup privs on terminationStephen Hemminger
When doing valgrind testing, the privledges from zprivs_init() need to be cleaned up on exit.
2011-12-06bgpd: store nexthop info for redistributed IPV6 routesStephen Hemminger
BGP was ignoring nexthop info for static and other redistributed routes for IPv6. Build extra attribute info to store the nexthop. See also: https://bugzilla.vyatta.com/show_bug.cgi?id=6073
2011-12-03bgpd: fix memory leak for extra attributesOleg A. Arkhangelsky
this fixes commit b881c7074bb698aeb1b099175b325734fc6e44d2
2011-11-21bgpd: remove unused function bgp_bind_addressDavid Lamparter
bgp_bind_address is replaced with sockunion_bind.
2011-11-21bgpd: fix update-source for IPv6 (BZ#548)David Lamparter
if update-source was given as interface name, bgpd was unconditionally trying to bind to an IPv4 address from that interface. change function to find the best-matching (number of address bits) same-family address on the interface.
2011-11-15bgpd: fix "nexthop-local unchanged" (BZ#350)Dylan Hall
2011-11-15bgpd: justify capabilities for TOS settingChris Luke
To set the TOS bits on TCP connections, platforms that restrict capabilities need the priv level to be raised before the sockopt is set, and this requires the ZCAP_NET_ADMIN priv. * bgp_main.c: update _caps_p to include ZCAP_NET_ADMIN * bgp_network.c * bgp_connect(): request ZPRIVS_RAISE/ZPRIVS_LOWER * bgp_listener(): request ZPRIVS_RAISE earlier
2011-11-15bgpd: revised fix to --dryrun (BZ#622)Sergey Y. Afonin
2011-10-26bgpd: fix 2 more cases of length error reportingDenis Ovsienko
* bgp_attr.c (bgp_attr_originator_id, bgp_attr_cluster_list): provide required arguments to bgp_attr_malformed()
2011-10-22bgpd: check AGGREGATOR attr flags (BZ#678)Denis Ovsienko
* bgp_attr.c * bgp_attr_aggregator(): check Optional/Transitive flag bits
2011-10-19bgpd: fix more regressions in attr flag checksDenis Ovsienko
Commit 05a4936b713b9882171d0f7fb20b8439df23939e fixed some of the attributes involved, but not all. This commit should do it. * bgp_attr.c * bgp_attr_originator_id() * bgp_attr_cluster_list() * bgp_mp_reach_parse() * bgp_mp_unreach_parse()
2011-10-18bgpd: use bgp_attr_malformed()Denis Ovsienko
Some of the recent attribute flags/length checks copied from QRE use bgp_notify_send_with_data() directly, but master branch assumes using bgp_attr_malformed(). * bgp_attr.c * bgp_attr_med() * bgp_attr_local_pref() * bgp_attr_atomic() * bgp_attr_originator_id() * bgp_attr_cluster_list() * bgp_mp_reach_parse() * bgp_mp_unreach_parse()
2011-10-17bgpd: add flag checks for MP_(UN)REACH_NLRIDenis Ovsienko
* bgp_attr.[ch] * bgp_mp_reach_parse(): add extra arguments and a uniform flag check block * bgp_mp_unreach_parse(): idem * bgp_attr_parse(): provide extra arguments * bgp_mp_attr_test.c * parse_test(): justify respective calls
2011-10-17bgpd: fix spelling of CLUSTER_LISTDenis Ovsienko
2011-10-17bgpd: check CLUSTER_LIST attribute flagsDenis Ovsienko
* bgp_attr.c * bgp_attr_cluster_list(): accept extra argument, add checks for "optional", "transitive" and "partial" bits, log each error condition independently * bgp_attr_parse(): provide extra arguments
2011-10-17bgpd: check ORIGINATOR_ID attribute flagsDenis Ovsienko
* bgp_attr.c * bgp_attr_originator_id(): accept extra argument, add checks for "optional", "transitive" and "partial" bits, log each error condition independently * bgp_attr_parse(): provide extra arguments
2011-10-17IPv6 transport class suppportStephen Hemminger
IPv6 supports the same concept of differentiated service for routing protocols as IPv4, but like too many things, the standards committee decided that having two names for the same thing wasn't good enough and introduced a third more generic term transport class. The socket option to set transport class works the same as IPv4, but the arguments are different. * lib/sockopt.[ch] * setsockopt_ipv6_tclass(): new function * bgpd/bgp_network.c * bgp_connect(): set socket option * bgp_listener(): set socket option * ospf6d/ospf6_network.c * ospf6_set_transport_class(): new function * ospf6_serv_sock(): set socket option * ripngd/ripngd.c * ripng_make_socket(): set socket option
2011-10-12bgpd: fix regression in improved attr flag checksDenis Ovsienko
Commit 2febf323411c1aed9d7694898f852ce2ef36a7e5 assumed every flag bit except optional/transitive/partial unset, which at times could not be true for "extended length" bit. * bgp_attr.c * bgp_attr_origin(): exclude BGP_ATTR_FLAG_EXTLEN from comparison * bgp_attr_nexthop(): idem * bgp_attr_med(): idem * bgp_attr_local_pref(): idem * bgp_attr_atomic(): idem
2011-10-08bgpd: fix parsing of graceful restart cap. (#663)Peter Pentchev
"While setting up a testbed, I ran across a little problem in the parsing of the "graceful restart" BGP capability that resulted in Quagga not actually activating it for the peer in question - when the peer sent a single AFI/SAFI block." * bgp_open.c * bgp_capability_restart(): actually process the last AFI/SAFI block