| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_attr.c
* bgp_attr_cluster_list(): accept extra argument, add checks for
"optional", "transitive" and "partial" bits, log each error
condition independently
* bgp_attr_parse(): provide extra arguments
|
|
* bgp_attr.c
* bgp_attr_originator_id(): accept extra argument, add checks for
"optional", "transitive" and "partial" bits, log each error
condition independently
* bgp_attr_parse(): provide extra arguments
|
|
IPv6 supports the same concept of differentiated service for routing
protocols as IPv4, but like too many things, the standards committee
decided that having two names for the same thing wasn't good enough and
introduced a third more generic term transport class.
The socket option to set transport class works the same as IPv4, but the
arguments are different.
* lib/sockopt.[ch]
* setsockopt_ipv6_tclass(): new function
* bgpd/bgp_network.c
* bgp_connect(): set socket option
* bgp_listener(): set socket option
* ospf6d/ospf6_network.c
* ospf6_set_transport_class(): new function
* ospf6_serv_sock(): set socket option
* ripngd/ripngd.c
* ripng_make_socket(): set socket option
|
|
Commit 2febf323411c1aed9d7694898f852ce2ef36a7e5 assumed every flag
bit except optional/transitive/partial unset, which at times could
not be true for "extended length" bit.
* bgp_attr.c
* bgp_attr_origin(): exclude BGP_ATTR_FLAG_EXTLEN from comparison
* bgp_attr_nexthop(): idem
* bgp_attr_med(): idem
* bgp_attr_local_pref(): idem
* bgp_attr_atomic(): idem
|
|
"While setting up a testbed, I ran across a little problem in the
parsing of the "graceful restart" BGP capability that resulted in
Quagga not actually activating it for the peer in question - when
the peer sent a single AFI/SAFI block."
* bgp_open.c
* bgp_capability_restart(): actually process the last AFI/SAFI block
|
|
* bgp_attr.c
* bgp_attr_parse(): provide extra argument to bgp_attr_aggregator()
* bgp_attr_local_pref(): use bgp_notify_send_with_data()
* bgp_attr_atomic(): idem
* bgp_attr_aggregator(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
Do not check each of the Optional/Transitive/Partial attribute
flag bits, when their only valid combination is known in advance,
but still perform bit-deep error message logging. This change
assumes unused (low-order) 4 bits of the flag octet cleared.
* bgp_attr.c
* bgp_attr_origin(): rewrite check
* bgp_attr_nexthop(): idem
* bgp_attr_med(): idem
* bgp_attr_local_pref(): idem
* bgp_attr_atomic(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
|
|
ORIGIN handling function used to have "partial" bit check and recent
commits added it for NEXT_HOP, MULTI_EXIT_DISC and ATOMIC_AGGREGATE
cases. This commit adds "partial" check for AS_PATH and LOCAL_PREF
cases, which should leave attributes 1 through 6 inclusive completely
covered with attribute flags checks.
* bgp_attr.c
* bgp_attr_origin(): use bit-by-bit checks for better diagnostics
* bgp_attr_aspath(): add flag check
* bgp_attr_local_pref(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): new helper macro
* bgp_attr.c
* bgp_attr_nexthop(): add check for "partial" bit, refresh flag error
reporting, explain meaning of RFC4271 section 6.3 and implement it
Conflicts:
bgpd/bgp_attr.c
|
|
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use
that was never fully implemented, so it is deprecated by this
document.
* zebra.h: rename macro
* bgp_fsm.c: (bgp_graceful_restart_timer_expire,
bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update
* bgpd.c: (peer_nsf_stop): update
* bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case
any more
|
|
(with resolved conflict in bgpd/bgp_packet.c)
Two macros resolving to the same integer constant broke a case block and
a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was
performed.
* bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single
* macro
* bgp_capability_test.c: update test data
* bgp_mp_attr_test.c: idem
* bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update
macro and check conditions (where appropriate)
* bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send,
bgp_update_receive, bgp_route_refresh_receive): idem
* bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices,
bgp_open_capability_orf, bgp_open_capability): idem
* bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute,
bgp_packet_withdraw): idem
|
|
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659)
* bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
|
|
* bgp_debug.c (bgp_notify_open_msg, bgp_notify_update_msg,
bgp_notify_cease_msg, bgp_notify_capability_msg): add messages for
"unspecific" subcode.
|
|
|
|
|
|
* bgp_attr.c
* bgp_attr_atomic(): accept extra argument, add checks for
"optional", "transitive" and "partial" bits, log each error
condition independently
* bgp_attr_parse(): provide extra argument
|
|
* bgp_attr.c
* bgp_attr_med(): add checks for "optional", "transitive" and
"partial" bits, log each error condition independently
|
|
* bgp_attr.c
* bgp_attr_local_pref(): accept extra argument, add checks for
"optional" and "transitive" bits, log each error condition
independently
* bgp_attr_parse(): provide extra argument
|
|
* bgp_packet.c
* bgp_notify_send_with_data(): add calls to zlog_info()
|
|
|
|
This vulnerability (CERT-FI #513254) was reported by CROSS project.
They have also suggested a fix to the problem, which was found
acceptable.
The problem occurs when bgpd receives an UPDATE message containing
255 unknown AS_PATH attributes in Path Attribute Extended Communities.
This causes a buffer overlow in bgpd.
* bgp_ecommunity.c
* ecommunity_ecom2str(): perform size check earlier
|
|
Contains BGP fixes:
- set extcommunity crash: tihs patch tries to make the refcounting more robust
but does not fully solve the problem, sadly.
- BGP attribute error handling: Little testing.
|
|
changes in the multipath set or attributes, but failed to check for
just a bestpath change. The result is there is no attribute on the new
bestpath and we hit the assert. Added the bestpath check and
rearranged the code to only check attributes when there is no bestpath
or multipath change, so we only scan the for attribute changes when
necessary.
* bgpd/bgp_mpath.c
* bgp_info_mpath_aggregate_update(): Added check for bestpath
change before skipping the aggregate generation. Skip the attribute
check if either the multipath set or bestpath has changed.
|
|
multipath list. This causes the multipath list to get truncated
but the multipath count still reflects what it was before truncation.
When we install the route to zebra we fail to fill the nexthop
array with the number of nexthop pointers indicated by the
multipath count and this leads to a NULL pointer crash in
stream_put_in_addr().
Changes:
* bgpd/bgp_mpath.c
* bgp_info_mpath_update(): If new_mpath is the bestpath we should
just move to the next mp_list node. Move dequeue of new_mpath and
the code that updates next_mpath to inside the check that
new_mpath is not the bestpath.
|
|
advertised is based on the bestpath attribute set, but the
following attributes are aggregated from the attribute sets
of the multipath constituents:
- AS_PATH
- ORIGIN
- COMMUNITIES
- EXTENDED COMMUNITIES
In addition the route is advertised with the NEXT_HOP set
to the router's interface IP address, instead of the NEXT_HOP
of the best path. This is to ensure that traffic will go to this
router so it can be fanned out via the multipath route.
* bgpd/ecommunity.c
* ecommunity_uniq_sort(): Make this function externally accessible
* bgpd/ecommunity.h
* Add external declaration for ecommunity_uniq_sort()
* bgpd/bgp_mpath.c
* bgp_info_nexthop_cmp(): Replace calls to bgp_attr_extra_get()
to avoid unwanted memory allocation
* bgp_info_mpath_free(): Free aggregate attribute for multipath
* bgp_info_mpath_attr(): Lookup aggregate attribute of a multipath route
* bgp_info_mpath_attr_set(): Set aggregate attribute of a multipath route
* bgp_info_mpath_aggregate_update(): Update the aggregate attribute
of a multipath route
* bgpd/bgp_mpath.h
* bgp_info_mpath: Add pointer to hold aggregate attribute of a multipath
* Add external declarations for new functions
* bgpd/bgp_route.c
* bgp_announce_check(): Use aggregate attribute when announcing multipath
route
* bgp_announce_check_rsclient(): Use aggregate attribute when announcing
multipath route
* bgp_best_selection(): After updating multipath set, update the
multipath aggregate attribute
|
|
first stage of the best path calculation. The second stage then
selects a winner from each peer AS's best path. In the second stage we
clear multipath set of the non-selected best paths via
bgp_mp_dmed_deselect(). Since the multipath set is already marked up
for the winning path, we don't call bgp_info_mpath_update() after the
second stage calculation.
* bgpd/bgp_mpath.c
* bgp_mp_dmed_deselect(): New function to cleanup the multipath
markup if a DMED selected path loses in stage 2 of the best path
calculation
* bgpd/bgp_mpath.h
* Add external declaration of bgp_mp_dmed_deselect()
* bgpd/bgp_route.c
* bgp_best_selection(): If multipath is enabled, build up the mp_list
for the current peer AS, and do the RIB markup the best path from
that AS. In the second stage, clear the RIB markup for the DMED
selected path if it is not selected as best. Only call
bgp_info_mpath_update() in the second stage when not doing
deterministic MED.
|
|
routes. Use a growable buffer (bgp_nexthop_buf) to collect nexthops
that are included in the announcement. Use the BGP_INFO_MULTIPATH_CHG
flag to trigger zebra announcement so zebra will be updated if the
multipath set changes. Display all multipath nexthops in
'debug bgp zebra' output.
* bgpd/bgp_main.c
* bgp_exit(): Free bgp_nexthop_buf when exiting
* bgpd/bgp_route.c
* bgp_process_rsclient(): Clear BGP_INFO_MULTIPATH_CHG after processing
* bgp_process_main(): Check BGP_INFO_MULTIPATH_CHG to trigger zebra
announcement and clear aftr processing
* bgpd/bgp_zebra.c
* bgp_nexthop_buf: Growable buffer used to collect nexthops for zebra
announcement
* bgp_zebra_announce(): Grow bgp_nexthop_buf if needed. Include
multipath count in zebra announcement and add all nexthops to
bgp_nexthop_buf. Pass bgp_nexthop_buf data to zebra announcement.
Added nexthops to debug output.
* bgp_zebra_init(): Initialize bgp_nexthop_buf at startup
* bgpd/bgp_zebra.h
* BGP_NEXTHOP_BUF_SIZE: Default initial bgp_nexthop_buf size has room
for 8 nexthops
|
|
information based on the multipath list (mp_list) generated during
the best path calculation. Display "multipath" for paths that are
multipath and also on bestpath if the route is multipath. Flag a
best path with the BGP_INFO_MULTIPATH_CHG if the multipath
set has changed since the last update. This can be used to trigger
updates to zebra and peers.
The multipath markup is a lazily allocated bgp_info_mpath structure
that is added to the best path and any multipaths. The mpath structures
are linked together with the best path element at the head and the
other elements ordered by nexthop and then by peer address. This
markup scheme is updated by calling bgp_info_mpath_update() and passing
in a new mp_list the the current multipath set. There are additional
API's for walking the multipath set, querying the count of multipaths,
and for cleaning up the multipath markup information when freeing path
information.
* bgpd/bgp_mpath.c
* bgp_info_mpath_new(): Allocation of new mpath element
* bgp_info_mpath_free(): Release memory for mpath element
* bgp_info_mpath_get(): Access mpath element of path. Allocate memory
on-demand
* bgp_info_mpath_enqueue(): Enqueue a path onto the multipath list
* bgp_info_mpath_dequeue(): Remove a path from the multipath list
* bgp_info_mpath_first(): Return first path on the multipath list
* bgp_info_mpath_next(): Return next path on the multipath list
* bgp_info_mpath_count(): Return the number of paths on the multipath list
* bgp_info_mpath_count_set(): Set the number of paths on the multipath list
* bgp_info_mpath_update(): Update multipath markup on bgp route table entry
and flag any changes. Emit 'debug bgp event' output on any multipath
change.
* bgpd/bgp_mpath.h
* struct bgp_info_mpath: Information added to a bgp_info path to record
multipath information
* External declarations for new functions in bgp_mpath.c
* bgpd/bgp_route.c
* bgp_info_free(): Free mpath memory when freeing path information
* bgp_info_reap(): Dequeue path from multipath queue before deleting it
* bgp_best_selection(): Calls bgp_info_mpath_update() with latest
mp_list to mark-up rib table entry
* bgp_vty_out_detail(): Add display of multipath flag for a path. Also
display 'multipath' for bestpath if it is a multipath route
* bgpd/bgp_route.h
* struct bgp_info: Add pointer to bgp_info_mpath information
* Add flags to mark a path as multipath (BGP_INFO_MULTIPATH) and
to mark bestpath if multipath information has changed
(BGP_INFO_MULTIPATH_CHG)
* lib/memtypes.c
* Add MTYPE_BGP_MPATH_INFO for allocating memory for bgp_info_mpath
* tests/bgp_mpath_test.c
* Add test case for bgp_info_mpath_update() and supporting functions
|
|
equal to the best path are accumulated onto an ordered list (mp_list)
if maximum-paths is configured. A future commit will add the
multipath markup to the BGP rib table based on the mp_list. Add
unit test for the added mp_list functions.
Deterministic MED is not supported in this commit, it will be
added later.
* bgpd/bgp_aspath.c
* Make aspath_cmp() an external symbol so it can be used in
equivalent paths check
* bgpd/bgp_aspath.h
* Add extern declaration of aspath_cmp()
* bgpd/bgp_mpath.c
* bgp_info_nexthop_cmp(): Compares nexthops of two paths
* bgp_info_mpath_cmp(): Compare function to order multipaths by
nexthop and then by peer address
* bgp_mp_list_init(): Initialize a list with the multipath order function
* bgp_mp_list_clear(): Clear out the mp_list
* bgp_mp_list_add(): Add a multipath to mp_list
* bgpd/bgp_mpath.h
* External declarations for above added functions in bgp_mpath.c
* bgpd/bgp_route.c
* bgp_info_cmp(): Add equivalent paths result (paths_eq). If eBGP
paths are equal down to IGP metric check, flag as equal if peer AS
matches. Similarly for iBGP paths but compare full AS_PATH.
* bgp_best_selection(): If multipath is enabled, accumulate equivalent paths
in mp_list. Add debug bgp event output to see result (will be filtered
later to display only when change occurs)
* bgp_process_rsclient(): Pass multipath config to bgp_best_selection()
* bgp_process_main(): Pass multipath config to bgp_best_selection()
* tests/bgp_mpath_test.c
* Add unit test case for bgp_mp_list functions
|
|
There is support to configure this for each (AFI,SAFI), but
currently this configuration is only present for IPv4 unicast:
maximum-paths [ibgp] <1-255>
no maximum-paths [ibgp] [<1-255>]
* bgpd/Makefile.am
* Add bgp_mpath.h and bgp_mpath.c to build
* bgpd/bgp_mpath.h
* New file for bgp multipath declarations
* define BGP_DEFAULT_MAXPATHS
* bgpd/bgp_mpath.c
* bgp_maximum_paths_set(): Configure maximum paths for the given
afi, safi and bgp instance
* bgp_maximum_paths_unset(): Return maximum paths configuration to
the default setting for the given afi, safi and bgp instance
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgp_config_write_maxpaths(): Outputs configuration for the given
afi, safi and bgp instance
* Install command elements for IPv4 unicast
* bgpd/bgp_zebra.h
* bgp_config_write_maxpaths(): External declaration
* bgpd/bgpd.c
* bgp_create(): Initialize bgp instance to default maximum paths setting
* bgp_config_write_family(): Output maximum paths configuration
for the given address family
* bgp_config_write(): Output maximum paths configuration for
IPv4 unicast address family
* bgpd/bgpd.h
* struct bgp: Add storage for maximum paths configuration for
each afi, safi
|
|
* bgp_aspath.c: (assegments_parse) just bail early if length doesn't match
and fix the formatting.
* bgp_network.c: add include needed for set_nonblocking
* bgp_packet.c: formatting
|
|
* bgp_routemap.c: (route_set_community_delete) When deleting a
community in a route-map the old community was being orphaned. Like
the description of the same code in route_set_community, this is a
hack, not a true fix.
|
|
This reverts commit 2c9fd7e07283b8904ef20030c9dadb032e999b12.
|
|
* bgp_attr.c: (attrhash_key_make) 98e30f should have changed jhash2 to jhash.
These kinds of merge errors would be reduced and life would be easier if
people would submit fully-formed fixes that could be chucked directly into
git-am.
|
|
* bgpd.h: Add error code for setting GTSM on iBGP
* bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal
incompatibility of GTSM+iBGP to vty.
Consider the session state when setting GTSM, and reset Open/Active peers
to let them pick up new TTL from start.
|
|
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup.
({no_,}neighbor_ttl_security) ditto.
* bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only
need to be done on transition.
* sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
|
|
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used
to verify that incoming packets have been sent from neighbours no more
than X IP hops away. In other words, this allows packets that were sent from
further away (i.e. not by the neighbour with known distance, and so possibly
a miscreant) to be filtered out.
* lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL
using the IP_MINTTL socket opt.
* bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command
error for minttl.
(struct peer) add a config variable, to store the configured minttl.
(peer_ttl_security_hops_{set,unset}) configuration handlers
* bgpd.c: (peer_group_get) init gtsm_hops
(peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and
GTSM can't both be active for a peer at the same time.
(peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with
ebgp_multihop.
(bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X".
* bgp_vty.c: (bgp_vty_return) message for
BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK
(peer_ebgp_multihop_{un,}set_vty)
* bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate.
(bgp_connect) ditto for outbound.
|
|
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network
which is HAVE_IPV6, so these should be too.
(bgp_route_init) and the installs should be similarly ifdefed
|
|
* bgp_attr.c; (attrhash_key_make) s6_addr is only member of in6_addr
guaranteed to be available - s6_addr32 isn't. Fix to be more portable, and
thus allow compilation on BSD again.
|
|
* bgp_packet.c: (bgp_write) On BGP write, use TCP_CORK to provide hints to
kernel about TCP buffering. This will cause BGP packets to occur in
bigger chunks (full size MTU), improving performance and getting rid of
one of the problems reported in the UNH BGP conformance test.
|
|
* bgpd: Rather than toggling socket in/out of non-block mode, just leave it
in nonblocking mode.
One exception is in bgp_notify which only happens just before close.
|
|
* bgp_community.[ch]: (community_lookup) New helper function to look
up a community list in the hash table.
* bgp_routemap.c: A new community structure was being allocated for
every BGP update which matched a route map which set a community.
This behavior led to rapid growth in the memory consumed by bgpd.
Adding the communities to the hash table addresses the memory
growth, but may introduce a problem in modifying or deleting the
'set community' statement in the route map.
|
|
Many show commands do not have support for multiple views and do not
treat different address families uniformly. The following changes add
a number of commands with support for views and rationalized treatment
of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and
more recent versions of IOS).
* bgp_route.c: (bgp_show_community) Inserted a new second argument (the
name of the view) and the code to look up that name in the BGP structure.
The NULL argument in the call to bgp_show (indicating the default view)
was replaced by the specified view. The existing calls to
bgp_show_community had a NULL second argument inserted to make clear
that they refer to the default view.
(top level) Added new functions via the DEFUN and/or ALIAS macros (and
the associated command table entries) to add the commands
show bgp ipv4 (unicast|multicast)
show bgp ipv4 (unicast|multicast) A.B.C.D
show bgp ipv4 (unicast|multicast) A.B.C.D/M
show bgp ipv6 (unicast|multicast)
show bgp ipv6 (unicast|multicast) X:X::X:X
show bgp ipv6 (unicast|multicast) X:X::X:X/M
These show either the full BGP table or the specified route or
prefix for the given address family.
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community
show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \
(AA:NN|local-AS|no-advertise|no-export){1,4}
For the specified view and address family, these show entries
matching any community or the specified communit(y)(ies).
show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \
(A.B.C.D|X:X::X:X) (advertised-routes|received-routes)
For the specified view and address family, show the routes
advertised to or received from the given BGP neighbor.
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D
show bgp [view WORD] ipv4 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X)
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X
show bgp [view WORD] ipv6 (unicast|multicast) \
rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M
For the specifed (optional) view and address family, show either
the full BGP table or the specified route or prefix for the given
route server client peer.
* bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS
macros (and the associated command table entries) to add the commands
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary
show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary
For the specified (optional) view and address family, display
either the normal summary table for BGP peers, or the route server
client table showing the import and export policies.
|
|
* BGP error handling generally boils down to "reset session". This was fine
when all BGP speakers pretty much understood all BGP messages. However
the increasing deployment of new attribute types has shown this approach
to cause problems, in particular where a new attribute type is "tunneled"
over some speakers which do not understand it, and then arrives at a speaker
which does but considers it malformed (e.g. corruption along the way, or
because of early implementation bugs/interop issues).
To mitigate this drafts before the IDR (likely to be adopted) propose to
treat errors in partial (i.e. not understood by neighbour), optional
transitive attributes, when received from eBGP peers, as withdrawing only
the NLRIs in the affected UPDATE, rather than causing the entire session
to be reset. See:
http://tools.ietf.org/html/draft-scudder-idr-optional-transitive
* bgp_aspath.c: (assegments_parse) Replace the "NULL means valid, 0-length
OR an error" return value with an error code - instead taking
pointer to result structure as arg.
(aspath_parse) adjust to suit previous change, but here NULL really
does mean error in the external interface.
* bgp_attr.h (bgp_attr_parse) use an explictly typed and enumerated
value to indicate return result.
(bgp_attr_unintern_sub) cleans up just the members of an attr, but not the
attr itself, for benefit of those who use a stack-local attr.
* bgp_attr.c: (bgp_attr_unintern_sub) split out from bgp_attr_unintern
(bgp_attr_unintern) as previous.
(bgp_attr_malformed) helper function to centralise decisions on how to
handle errors in attributes.
(bgp_attr_{aspathlimit,origin,etc..}) Use bgp_attr_malformed.
(bgp_attr_aspathlimit) Subcode for error specifc to this attr should be
BGP_NOTIFY_UPDATE_OPT_ATTR_ERR.
(bgp_attr_as4_path) be more rigorous about checks, ala bgp_attr_as_path.
(bgp_attr_parse) Adjust to deal with the additional error level that
bgp_attr_ parsers can raise, and also similarly return appropriate
error back up to (bgp_update_receive). Try to avoid leaking as4_path.
* bgp_packet.c: (bgp_update_receive) Adjust to deal with BGP_ATTR_PARSE_WITHDRAW
error level from bgp_attr_parse, which should lead to a withdraw, by
making the attribute parameter in call to (bgp_nlri_parse) conditional
on the error, so the update case morphs also into a withdraw.
Use bgp_attr_unintern_sub from above, instead of doing this itself.
Fix error case returns which were not calling bgp_attr_unintern_sub
and probably leaking memory.
* tests/aspath_test.c: Fix to work for null return with bad segments
|
|
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its
author does not think it will make progress in IDR. Remove all support
introduced for it, but leave stubs for the commands to avoid breaking
any configurations.
Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
|
|
extcom..'
* Extended communities has some kind of resource allocation problem which
causes a double-free if the 'set extcommunity ...' command is used.
Try fix by properly interning extcommunities.
Also, more generally, make unintern functions take a double pointer
so they can NULL out callers references - a usefully defensive programming
pattern for functions which make refs invalid.
Sadly, this patch doesn't fix the problem entirely - crashes still
occur on session clear.
* bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer
args.
* bgp_community.h: (community_unintern) ditto
* bgp_attr.h: (bgp_attr_intern) ditto
* bgp_aspath.h: (bgp_aspath.h) ditto
* (general) update all callers of above
* bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added
to the attr, and unintern any old one.
(route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used
for the route-map set.
(route_set_ecommunity_*_free) unintern to match, instead of free
(route_set_ecommunity_soo) Do as _rt does and don't just leak
any pre-existing community, add to it (is additive right though?)
|
|
Some of the changes made in commit cddb8112b80fa9867156c637d63e6e79eeac67bb
don't work particularly well for other changes that need to be made to
address BGP attribute error handling problems. In particular, returning
a pointer from complex attribute data parsing functions will not suffice
to express the require range of return status conditions.
* bgp_aspath.c: (assegments_parse) Rollback to a more minimal set of
changes to fix the original problem.
(aspath_parse) Slightly needless pushing around of code, and taking
2 parameters to say whether ot use 2 or 4 byte encoding seems unnecessary.
* bgp_attr.c: (bgp_attr_as{,4}path) Rollback, in preparation for BGP
attribute error handling update.
|
|
* bgp_attr.c: (bgp_attr_ext_communities) Certain extended-community attrs
can leave attr->flag indicating ext-community is present, even though no
extended-community object has been attached to the attr structure. Thus a
null-pointer dereference can occur later.
(bgp_attr_community) No bug fixed here, but tidy up flow so it has same
form as previous.
Problem and fix thanks to anonymous reporter.
|
|
* bgp_attr.c: I observed while doing some debugging that even for simple
tests there was a lot of hash collisions for BGP attributes. Switch to
using Jhash rather than additive hashing. Probably overkill, but the
function is fast and available.
({attrhash,cluster,transit}_hask_key_make) convert to Jenkins hash,
instead of additive hash.
|
