summaryrefslogtreecommitdiff
path: root/doc/ChangeLog
AgeCommit message (Collapse)Author
2005-04-292005-04-29 Paul Jakma <paul@dishone.st>paul
* defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING. * quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse to update quagga.texi so that the 'UPDATED' in version.texi will be more recent, the Makefile seems to be dumb and not examine the texi files from which quagga.texi is generated. * quagga.info: Fresh copy to match updates.
2005-04-282005-04-28 Paul Jakma <paul@dishone.st>paul
* quagga.info: updated * Makefile.am: automake seems to depend doc built stuff on srcdir for some reason, or maybe its cause we have quagga.info, quagga.texi in CVS - not sure. Anyway, the static rule for quagga.pdf should depend on the srcdir quagga.texi in that case.
2005-04-282005-04-28 Paul Jakma <paul@dishone.st>paul
* quagga.info: updated
2005-04-222005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix spelling mistake: idenifier -> identifier.
2005-04-222005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix spelling mistake: intrefaces -> interfaces.
2005-04-102005-04-10 Paul Jakma <paul@dishone.st>paul
* quagga.info: Update to match bgpd.texi addition
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2005-04-052005-04-05 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Get rid of built_sources. It causes them to be added to dist, and the dist host can not generate the PDFs.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES for figures, automake doesnt know anything about them.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* .cvsignore: ignore eps files, built from sources
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* Makefile.am: quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new files, dia diagramme XML versions of the original corresponding EPS encapsulated bitmaps. * fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new files, png exports by dia of the source dia diagrammes above. * fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed, replaced by above dia source. * routeserver.texi: remove extension in image macros. * quagga.info: updated build * Makefile.am: Add rules to build eps (using 'convert'), png (using dia). Add figures_BUILT_SOURCES to extra_dist to avoid the dependency on dia :) (amongst other things) for dist users.
2005-03-252005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>vincent
* Extensions to Neighbor Discovery for Mobile IPv6
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* basic.texi: Add note about last-resort crash logging to /var/tmp when file logging is not configured. * quagga.info: updated build of autogenerated file
2005-01-242005-01-24 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.99.0 * doc/quagga.info: Version bump (autogenerated)
2005-01-102005-01-10 Paul Jakma <paul@dishone.st>paul
* texinfo.tex: Updated to a version which understands @{ and @} * vtysh.texi: Add node name for @section * quagga.info: updated build of autogenerated file
2005-01-072005-01-07 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.98.0 * doc/quagga.info: Version bump (autogenerated)
2005-01-052005-01-05 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.97.5 * doc/quagga.info: autogenerated, version bump.
2004-12-232004-12-23 Paul Jakma <paul@dishone.st>paul
configure.ac: Bump version to 0.97.4 doc/quagga.info: ditto (autogenerated file)
2004-12-18Add isisd.8 into list of man pages.hasso
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-11-222004-11-22 Paul Jakma <paul@dishone.st>paul
* bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
2004-11-19Make quagga.info in cvs actually useful for those who haven't latesthasso
makeinfo: * Don't attempt to generate it after every ./configure. * Don't remove it while cleaning up.
2004-11-152004-11-15 Paul Jakma <paul@dishone.st>paul
* quagga.info: Add generated file to CVS, as it requires most recent texinfo to build, until such time as texinfo 4.7 is more prevalent.
2004-11-152004-11-15 Paul Jakma <paul@dishone.st>paul
* routeserver.texi: Strip ctrl-M from line endings, note by sigma@smx.pair.com
2004-11-08Oops, wrong date on changelog entries..paul
2004-11-082004-11-07 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Add routeserver.texi to quagga_TEXINFOS. Add quagga.info to clean files list (would have thought automake would have done this, but it doesnt seem to)
2004-11-082004-11-07 Paul Jakma <paul@dishone.st>paul
* quagga.texi: include routeserver.texi. TODO: integrate the current multiple-instance orientated bgpd route-server section with the new route-server docs.
2004-11-072004-11-07 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Add automatic rule to build pdf's from eps figures. Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern probably otherwise will override automake's rule for quagga.pdf) * overview.texi: URL was causing TeX overfull, put on newline. * quagga.texi: Put the copyright notice into @copying section, as is proper. Strip trailling space from the main menu lines. * rip(ng)?d.texi: Minor reformatting. * Add the route server docs. * bgpd.texi: remove unneeded page breaks. The 6Bone example overflows though.
2004-11-072004-11-07 Paul Jakma <paul@dishone.st>paul
* Add the route server docs. * routeserver.texi: new file, texinfo'fied and slightly modified version of the original TeX from James Luis Rubio. * fig-*.eps: new files, diagrammes.
2004-11-062004-11-06 Paul Jakma <paul@dishone.st>paul
* defines.texi.in: New file, texi variables should be set here, autoconf substitution is available. Define common AUTHORS, COPYRIGHT_YEAR and COPYRIGHT_STR vars. * (global): Make use of makeinfo node pointer auto-creation to avoid having to fully specify links for nodes, so we only have to specify current node name - simplifies text slightly. Remove extraneous newlines which appear to cause extra blank pages to be added in output. Update copyright strings which appear in various places to use the new COPYRIGHT_STR texinfo variable. Change url to uref, the former need not output an actual hyperlink depending on version of texinfo, the latter should if supported by the format (eg PDF). * texinfo.tex: Update to a more recent version. previous file was many many years old. This file should possibly be removed altogether, and allowed to be installed by automake. * quagga.texi: Make use of automake's version.texi feature to have VERSION and some other vars auto-defined. include defines.texi. Change copyright strings to use the COPYRIGHT_STR variable. * install.texi: Make the privs section an actual section. Ditto for the Linux notes. * overview.texi: Supply URL for Quagga, where format allows. Tidy up one or two paragraphs slightly. Update the section on supported platforms. Remove the ZNOG list stuff, direct reader to the website for further information on email lists. * vtysh.texi: Update the integrated config file section. Make the commands sections so correct PDF indexes are built.
2004-10-12ospf6d supports SNMP as well now.hasso
2004-10-11Disable ospfapi init by default.hasso
2004-10-112004-10-11 Paul Jakma <paul@dishone.st>paul
* ospfd.texi: reformat the ospf md5 paragraph, add an additional way to work around bad clocks.
2004-10-03Big vtysh cleanup. See changelogs for details.hasso
2004-09-132004-09-11 Paul Jakma <paul@dishone.st>paul
* doc/quagga.texi: Update copyright. Contents should be at beginning of docs... * redhat/quagga.spec.in: wee keep_build define, to keep build dir.
2004-09-122004-09-11 Paul Jakma <paul@dishone.st>paul
* ospfd.texi: OSPF MD5 auth requires stable time.
2004-08-31Commit my hack (yes, I still call it hack) - command line switch for zebrahasso
daemon to change netlink receive buffer size.
2004-08-26More vtysh fixes. Specifying configuration from command line works now.hasso
2004-08-10I am bored. But I hate questions why there are man pages from version 0.88.hasso
Vtysh man page looks already how it should look IMHO, the rest need more work.
2004-07-31oops, forgot to update changelog.paul
2004-06-30Use EXTRA_DIST to distribute files, and don't list directories.gdt
Remove disthook that removed the crud that was copied in due to this.
2004-05-31Forgot to commit ChangeLog with last doc/ commit.paul
2003-11-27Added info about -A and -u command line switches to man pages.hasso
2002-12-13Initial revisionpaul