summaryrefslogtreecommitdiff
path: root/doc/ChangeLog
AgeCommit message (Collapse)Author
2007-03-21[doc] Makefile VPATH patchAndrew J. Schorr
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * Makefile.am: Patch rule for draft-zebra-00.txt to work in VPATH build environments.
2006-07-28[doc] Expand/cross-ref MD5 commands, tweak anchors to avoid added spacingPaul Jakma
2006-07-28 Paul Jakma <paul.jakma@sun.com> * main.texi: link-detect works on Solaris too. * ospfd.texi: Twiddle around with anchors a bit more. Clarify how setting MD5 auth by area and by interface interact, and add cross-references, as well as to the required command for setting key material.
2006-07-27[doc] minor tweaks, refine ospf redist,passive-inter, and abr-type helpPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * quagga.texi: Remove unused index definitions Add an Index node - for the concept index. * routeserver.texi: Set exampleindex to 0, so the example configs with long IPv6 addresses stand better chance of fitting. * overview.texi: 'Supported RFC' -> 'Supported RFCs' Remove paragraph indentation - texinfo does that. Revise the supported OS list slightly. Remove the IPv6 stack list, seems very dated and irrelevant. Revise the 'How to get Quagga' section. * ospfd.texi: minor tweaks: add some anchors, fix some minor format issues. Revise the help for 'abr-type'. Note that text authentication is unwise, recc'd MD5. Add some extra text for redistribute and passive-interface, about how latter can substitute for redist connected.
2006-07-27[vtysh] Never skip authentication, and add support for multiple -c commandsAndrew J. Schorr
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vtysh.1: Document new options -d and -E, and note that now multiple -c options may be supplied, with embedded linefeed now supported. In BUGS section, remove warning about vtysh causing a daemon to freeze, since this has been fixed. * vtysh_main.c: (usage) Add new -d and -E options. And note that -c can be used multiple times, possibly with embedded linefeeds. (longopts) Add new -d and -E options. (main) Add new -d and -E options, and create a linked list to support multiple -c options. Do not call vtysh_connect_all until after vtysh_read_config(config_default) and vtysh_auth have succeeded. This prevents the vtysh.conf file from configuring any daemons, and it ensures that authentication has been passed before we send any commands to any daemons. Call vtysh_connect_all with any daemon name supplied with -d. If it is unable to connect to any daemons, issue an error message and exit immediately. When used in -c mode, call vtysh_execute("enable") before executing the commands in order to match interactive behavior. And detect embedded linefeed chars in -c commands and break them up appropriately. * vtysh.h: (vtysh_connect_all) Fix proto to reflect new daemon_name argument, and that it now returns an integer -- the number of daemons to which we were able to connect. * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. If supplied, connect only to that daemon. And return the number of daemons to which we were able to connect. (vtysh_prompt): Performance enhancement -- make struct utsname static so we call uname to get the hostname only once.
2006-07-04[doc] remove the auto-generated quagga.info file from CVSPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * quagga.info: remove auto-generated file. It will still be present in dist tarballs, so shouldn't affect anyone but direct users of CVS. Required texinfo version should be widely available. * .cvsignore: ignore quagga.info
2006-06-29[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"Andrew J. Schorr
2006-06-28 Erik Muller <erikm@internap.com> * ospfd.h: Define 2 new struct ospf config flags: OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL * ospf_nsm.c (nsm_change_state): Log adjacency changes if requested. * ospf_vty.c (ospf_log_adjacency_changes): New command function to implement ospf subcommand "log-adjacency-changes [detail]". (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. (show_ip_ospf) Show whether adjacency changes are logged. (ospf_config_write) Add "log-adjacency-changes [detail]" to config. (ospf_vty_init) Add ospf_log_adjacency_changes and no_ospf_log_adjacency_changes. * ospfd.texi: Document new ospf router subcommand "log-adjacency-changes [detail]".
2006-06-26[doc] OSPF MD5 keyid documentation, fix texinfo warnings in bgpd.texiPaul Jakma
2006-06-26 Paul Jakma <paul.jakma@sun.com> * ospfd.texi: Document that MD5 keyid is part of the protocol. * bgpd.texi: shut texinfo warnings up by replacing brackets in variable with angle brackets.
2006-05-23[doc] document neighbor ..... update-sourcePaul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * bgpd.texi: Document the update-source command.
2006-05-10[doc] Update auto-generated quagga.infoPaul Jakma
2006-05-10 Paul Jakma <paul.jakma@sun.com> * quagga.info: update auto-built file.
2006-05-08[doc] bug #245, remove reference to non-existent log_mode argumentPaul Jakma
2006-05-08 Paul Jakma <paul.jakma@sun.com> * main.texi: --log_mode does not exist, remove, bug #245.
2006-05-04[docs] Update ripd docs on version and authentication, see bugs #261,#262Paul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * ripd.texi: Add Version Control as a distinct section. Expand Version Control section with overview text, touching on insecurity of RIPv1 and referencing authentication section, cleanup text of various version commands. RIP Authentication: Add overview text, refer to RIPv1 version control, which is required to completely secure RIP.
2006-04-03[doc] document version zserv header, add txt figures, make pdf figs nicerPaul Jakma
2006-03-31 Paul Jakma <paul.jakma@sun.com> * fig*.txt: New files, txt versions of the diagrammes for the info file. * protocol.texi: Document the new version 1 header. * routeserver.texi: Explicitly specify scaling widths for the figures, only way to make them look reasonable, sadly. Try fix some formatting and explicitely note lists as being bulleted. * Makefile.am: convert seems to do png to pdf just fine. No need for intermediate eps. Add txt figure expansions and list as dependencies and EXTRA_DIST files.
2006-02-19[doc] Credit Jeroen Simonetti for contributing snmptrap.texiPaul Jakma
2006-02-19 Paul Jakma <paul.jakma@sun.com> * quagga.info: update auto-built file. * ChangeLog: Fix old, existing entry for snmptrap.texi addition to credit the author, who got in touch with me. * snmptrap.texi: Add comment line with author's details.
2006-01-19[version] bump configure.ac version number to 0.99.3paul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * configure.ac: Bump to 0.99.3 * doc/quagga.info: update auto-built file.
2005-11-252005-11-25 Paul Jakma <paul.jakma@sun.com>paul
* texinfo.tex: update to newer version, seems to now properly scale the diagramme images in PDF output.
2005-11-11[trivia] update quagga.info, auto-built filepaul
2005-11-11 Paul Jakma <paul.jakma@sun.com> * quagga.info: update auto-built file. Methinks it's time to remove from CVS..
2005-11-07[doc] List snmptrap.texi as a source, so it gets included in distpaul
2005-11-07 Paul Jakma <paul.jakma@sun.com> * Makefile.am: snmptrap.texi needs to be listed as a source, not disted otherwise.
2005-11-042005-11-04 Paul Jakma <paul.jakma@sun.com>paul
* quagga.info: Update auto-built file * ospf6d.texi: Add example config * bgpd.texi: Add example configs. Couple of cleanups of format and macros. * routemap.texi: Add an explanation of how route-maps work. Document the call and exit-policy commands.
2005-11-042005-11-04 Paul Jakma <paul.jakma@sun.com>paul
* snmptrap.texi: Contributed documentation, contributors name is lost (please get in touch). Configuring SNMP for logging traps. * snmp.texi: Minor formatting changes. * quagga.info: Update auto-built file
2005-10-292005-10-29 Paul Jakma <paul@dishone.st>paul
* ospfd.texi: Document the new spf and max-metric commands, and the additional form of dead-interval. Add documentation for various other commands. Cleanup misc stuff, citations, etc. Add some example configurations. * overview.texi: RFC3137 support added. * Makefile.am: Make quagga.pdf depend on the _TEXINFOS variable, this still doesn't fix the dependency though, sadly.
2005-10-112005-10-11 Paul Jakma <paul@dishone.st>paul
* quagga.texi: Rejiggle the copyright sections a bit, seems to make makeinfo happier and generates info pages again on FC4. * quagga.info: Update this auto-built file.
2005-04-292005-04-29 Paul Jakma <paul@dishone.st>paul
* defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING. * quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse to update quagga.texi so that the 'UPDATED' in version.texi will be more recent, the Makefile seems to be dumb and not examine the texi files from which quagga.texi is generated. * quagga.info: Fresh copy to match updates.
2005-04-282005-04-28 Paul Jakma <paul@dishone.st>paul
* quagga.info: updated * Makefile.am: automake seems to depend doc built stuff on srcdir for some reason, or maybe its cause we have quagga.info, quagga.texi in CVS - not sure. Anyway, the static rule for quagga.pdf should depend on the srcdir quagga.texi in that case.
2005-04-282005-04-28 Paul Jakma <paul@dishone.st>paul
* quagga.info: updated
2005-04-222005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix spelling mistake: idenifier -> identifier.
2005-04-222005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix spelling mistake: intrefaces -> interfaces.
2005-04-102005-04-10 Paul Jakma <paul@dishone.st>paul
* quagga.info: Update to match bgpd.texi addition
2005-04-08 * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
2005-04-052005-04-05 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Get rid of built_sources. It causes them to be added to dist, and the dist host can not generate the PDFs.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES for figures, automake doesnt know anything about them.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* .cvsignore: ignore eps files, built from sources
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* Makefile.am: quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
2005-04-022005-04-02 Paul Jakma <paul@dishone.st>paul
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new files, dia diagramme XML versions of the original corresponding EPS encapsulated bitmaps. * fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new files, png exports by dia of the source dia diagrammes above. * fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed, replaced by above dia source. * routeserver.texi: remove extension in image macros. * quagga.info: updated build * Makefile.am: Add rules to build eps (using 'convert'), png (using dia). Add figures_BUILT_SOURCES to extra_dist to avoid the dependency on dia :) (amongst other things) for dist users.
2005-03-252005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>vincent
* Extensions to Neighbor Discovery for Mobile IPv6
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* basic.texi: Add note about last-resort crash logging to /var/tmp when file logging is not configured. * quagga.info: updated build of autogenerated file
2005-01-242005-01-24 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.99.0 * doc/quagga.info: Version bump (autogenerated)
2005-01-102005-01-10 Paul Jakma <paul@dishone.st>paul
* texinfo.tex: Updated to a version which understands @{ and @} * vtysh.texi: Add node name for @section * quagga.info: updated build of autogenerated file
2005-01-072005-01-07 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.98.0 * doc/quagga.info: Version bump (autogenerated)
2005-01-052005-01-05 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.97.5 * doc/quagga.info: autogenerated, version bump.
2004-12-232004-12-23 Paul Jakma <paul@dishone.st>paul
configure.ac: Bump version to 0.97.4 doc/quagga.info: ditto (autogenerated file)
2004-12-18Add isisd.8 into list of man pages.hasso
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-11-222004-11-22 Paul Jakma <paul@dishone.st>paul
* bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
2004-11-19Make quagga.info in cvs actually useful for those who haven't latesthasso
makeinfo: * Don't attempt to generate it after every ./configure. * Don't remove it while cleaning up.
2004-11-152004-11-15 Paul Jakma <paul@dishone.st>paul
* quagga.info: Add generated file to CVS, as it requires most recent texinfo to build, until such time as texinfo 4.7 is more prevalent.
2004-11-152004-11-15 Paul Jakma <paul@dishone.st>paul
* routeserver.texi: Strip ctrl-M from line endings, note by sigma@smx.pair.com
2004-11-08Oops, wrong date on changelog entries..paul
2004-11-082004-11-07 Paul Jakma <paul@dishone.st>paul
* Makefile.am: Add routeserver.texi to quagga_TEXINFOS. Add quagga.info to clean files list (would have thought automake would have done this, but it doesnt seem to)
2004-11-082004-11-07 Paul Jakma <paul@dishone.st>paul
* quagga.texi: include routeserver.texi. TODO: integrate the current multiple-instance orientated bgpd route-server section with the new route-server docs.