| Age | Commit message (Collapse) | Author |
|---|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospfd/ospfd.c: (ospf_network_match_iface) Comment out
COMPATIBILITY_MODE. Going forward, the ospf "network" command
will use a simple test: does the network command prefix
contain the connected (destination) prefix of the interface?
* doc/ospfd.texi: Add a paragraph to the description of the OSPFv2
network command to explain how we handle interfaces with
peer addresses.
|
|
2007-04-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* basic.texi: Document the new 'log timestamp precision' command.
|
|
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* Makefile.am: Patch rule for draft-zebra-00.txt to work
in VPATH build environments.
|
|
2006-07-28 Paul Jakma <paul.jakma@sun.com>
* main.texi: link-detect works on Solaris too.
* ospfd.texi: Twiddle around with anchors a bit more.
Clarify how setting MD5 auth by area and by interface interact,
and add cross-references, as well as to the required
command for setting key material.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* quagga.texi: Remove unused index definitions
Add an Index node - for the concept index.
* routeserver.texi: Set exampleindex to 0, so the example configs
with long IPv6 addresses stand better chance of fitting.
* overview.texi: 'Supported RFC' -> 'Supported RFCs'
Remove paragraph indentation - texinfo does that.
Revise the supported OS list slightly.
Remove the IPv6 stack list, seems very dated and irrelevant.
Revise the 'How to get Quagga' section.
* ospfd.texi: minor tweaks: add some anchors, fix some minor
format issues.
Revise the help for 'abr-type'.
Note that text authentication is unwise, recc'd MD5.
Add some extra text for redistribute and passive-interface,
about how latter can substitute for redist connected.
|
|
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vtysh.1: Document new options -d and -E, and note that now multiple
-c options may be supplied, with embedded linefeed now supported.
In BUGS section, remove warning about vtysh causing a daemon
to freeze, since this has been fixed.
* vtysh_main.c: (usage) Add new -d and -E options. And note that
-c can be used multiple times, possibly with embedded linefeeds.
(longopts) Add new -d and -E options.
(main) Add new -d and -E options, and create a linked list to
support multiple -c options. Do not call vtysh_connect_all until
after vtysh_read_config(config_default) and vtysh_auth have
succeeded. This prevents the vtysh.conf file from configuring
any daemons, and it ensures that authentication has been passed
before we send any commands to any daemons. Call vtysh_connect_all
with any daemon name supplied with -d. If it is unable to connect
to any daemons, issue an error message and exit immediately.
When used in -c mode, call vtysh_execute("enable") before
executing the commands in order to match interactive behavior.
And detect embedded linefeed chars in -c commands and break them up
appropriately.
* vtysh.h: (vtysh_connect_all) Fix proto to reflect new
daemon_name argument, and that it now returns an integer -- the
number of daemons to which we were able to connect.
* vtysh.c: (vtysh_connect_all) Add a new daemon_name argument.
If supplied, connect only to that daemon. And return
the number of daemons to which we were able to connect.
(vtysh_prompt): Performance enhancement -- make struct utsname
static so we call uname to get the hostname only once.
|
|
2006-07-04 Paul Jakma <paul.jakma@sun.com>
* quagga.info: remove auto-generated file. It will still be
present in dist tarballs, so shouldn't affect anyone but
direct users of CVS. Required texinfo version should be
widely available.
* .cvsignore: ignore quagga.info
|
|
2006-06-28 Erik Muller <erikm@internap.com>
* ospfd.h: Define 2 new struct ospf config flags:
OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
* ospf_nsm.c (nsm_change_state): Log adjacency changes if
requested.
* ospf_vty.c (ospf_log_adjacency_changes): New command function
to implement ospf subcommand "log-adjacency-changes [detail]".
(no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
(show_ip_ospf) Show whether adjacency changes are logged.
(ospf_config_write) Add "log-adjacency-changes [detail]" to config.
(ospf_vty_init) Add ospf_log_adjacency_changes and
no_ospf_log_adjacency_changes.
* ospfd.texi: Document new ospf router subcommand
"log-adjacency-changes [detail]".
|
|
2006-06-26 Paul Jakma <paul.jakma@sun.com>
* ospfd.texi: Document that MD5 keyid is part of the protocol.
* bgpd.texi: shut texinfo warnings up by replacing brackets in
variable with angle brackets.
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* bgpd.texi: Document the update-source command.
|
|
2006-05-10 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file.
|
|
2006-05-08 Paul Jakma <paul.jakma@sun.com>
* main.texi: --log_mode does not exist, remove, bug #245.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* ripd.texi: Add Version Control as a distinct section.
Expand Version Control section with overview text,
touching on insecurity of RIPv1 and referencing
authentication section, cleanup text of various version
commands.
RIP Authentication: Add overview text, refer to RIPv1 version
control, which is required to completely secure RIP.
|
|
2006-03-31 Paul Jakma <paul.jakma@sun.com>
* fig*.txt: New files, txt versions of the diagrammes for the
info file.
* protocol.texi: Document the new version 1 header.
* routeserver.texi: Explicitly specify scaling widths for the
figures, only way to make them look reasonable, sadly.
Try fix some formatting and explicitely note lists as being
bulleted.
* Makefile.am: convert seems to do png to pdf just fine. No
need for intermediate eps.
Add txt figure expansions and list as dependencies and
EXTRA_DIST files.
|
|
2006-02-19 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file.
* ChangeLog: Fix old, existing entry for snmptrap.texi addition to
credit the author, who got in touch with me.
* snmptrap.texi: Add comment line with author's details.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Bump to 0.99.3
* doc/quagga.info: update auto-built file.
|
|
* texinfo.tex: update to newer version, seems to now properly
scale the diagramme images in PDF output.
|
|
2005-11-11 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file. Methinks it's time to
remove from CVS..
|
|
2005-11-07 Paul Jakma <paul.jakma@sun.com>
* Makefile.am: snmptrap.texi needs to be listed as a source,
not disted otherwise.
|
|
* quagga.info: Update auto-built file
* ospf6d.texi: Add example config
* bgpd.texi: Add example configs. Couple of cleanups of format
and macros.
* routemap.texi: Add an explanation of how route-maps work.
Document the call and exit-policy commands.
|
|
* snmptrap.texi: Contributed documentation, contributors name
is lost (please get in touch). Configuring SNMP for logging
traps.
* snmp.texi: Minor formatting changes.
* quagga.info: Update auto-built file
|
|
* ospfd.texi: Document the new spf and max-metric commands, and
the additional form of dead-interval. Add documentation for
various other commands. Cleanup misc stuff, citations, etc.
Add some example configurations.
* overview.texi: RFC3137 support added.
* Makefile.am: Make quagga.pdf depend on the _TEXINFOS
variable, this still doesn't fix the dependency though,
sadly.
|
|
* quagga.texi: Rejiggle the copyright sections a bit, seems to
make makeinfo happier and generates info pages again on FC4.
* quagga.info: Update this auto-built file.
|
|
* defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING.
* quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse
to update quagga.texi so that the 'UPDATED' in version.texi will
be more recent, the Makefile seems to be dumb and not examine
the texi files from which quagga.texi is generated.
* quagga.info: Fresh copy to match updates.
|
|
* quagga.info: updated
* Makefile.am: automake seems to depend doc built stuff on srcdir
for some reason, or maybe its cause we have quagga.info,
quagga.texi in CVS - not sure. Anyway, the static rule for
quagga.pdf should depend on the srcdir quagga.texi in that case.
|
|
* quagga.info: updated
|
|
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
spelling mistake: idenifier -> identifier.
|
|
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
spelling mistake: intrefaces -> interfaces.
|
|
* quagga.info: Update to match bgpd.texi addition
|
|
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
|
|
* Makefile.am: Get rid of built_sources. It causes them to be added
to dist, and the dist host can not generate the PDFs.
|
|
* Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES
for figures, automake doesnt know anything about them.
|
|
* .cvsignore: ignore eps files, built from sources
|
|
* Makefile.am: quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
|
|
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new
files, dia diagramme XML versions of the original corresponding
EPS encapsulated bitmaps.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new
files, png exports by dia of the source dia diagrammes above.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed,
replaced by above dia source.
* routeserver.texi: remove extension in image macros.
* quagga.info: updated build
* Makefile.am: Add rules to build eps (using 'convert'), png (using
dia). Add figures_BUILT_SOURCES to extra_dist to avoid the
dependency on dia :) (amongst other things) for dist users.
|
|
* Extensions to Neighbor Discovery for Mobile IPv6
|
|
* basic.texi: Add note about last-resort crash logging to /var/tmp
when file logging is not configured.
* quagga.info: updated build of autogenerated file
|
|
* configure.ac: Bump version to 0.99.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* texinfo.tex: Updated to a version which understands @{ and @}
* vtysh.texi: Add node name for @section
* quagga.info: updated build of autogenerated file
|
|
* configure.ac: Bump version to 0.98.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* configure.ac: Bump version to 0.97.5
* doc/quagga.info: autogenerated, version bump.
|
|
configure.ac: Bump version to 0.97.4
doc/quagga.info: ditto (autogenerated file)
|
|
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
|
|
* bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
|
|
makeinfo:
* Don't attempt to generate it after every ./configure.
* Don't remove it while cleaning up.
|
|
* quagga.info: Add generated file to CVS, as it requires most recent
texinfo to build, until such time as texinfo 4.7 is more
prevalent.
|
|
* routeserver.texi: Strip ctrl-M from line endings, note by
sigma@smx.pair.com
|
