summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2012-03-25doc: fix typo in babeld.Matthieu Boutier
2012-03-25doc: Document babeld.Juliusz Chroboczek
2012-03-08doc: Fix an apparently no longer legal @itemize @asisPaul Jakma
* basic.texi: @asis isn't legal with @itemize apparently, should be @w according to docs, but @w{} seems to be needed. Fixes doc build error.
2012-01-26zebra: justify rtadv VTY commands with argumentsDenis Ovsienko
ipv6 nd ra-interval ipv6 nd ra-lifetime ipv6 nd reachable-time ipv6 nd home-agent-preference ipv6 nd home-agent-lifetime ipv6 nd router-preference Calls to atoi() and atol() are replaced with VTY_GET_INTEGER_RANGE() macro, command patterns are clarified and aliases of some commands are added for consistency. Other changes are listed below. * zebra/rtadv.c * ipv6_nd_ra_interval_msec(): resolve -Wsign-compare * ipv6_nd_ra_interval(): idem * rtadv_init(): update to list new aliases * doc/ipv6.texi: update to match current implementation
2012-01-26zebra: freshen RFC references in rtadvDenis Ovsienko
RFC2461 was replaced by RFC4861 RFC3775 was replaced by RFC6275 draft-ietf-mip6-mipext-advapi-03 was replaced by RFC4584
2012-01-20zebra: include MTU option in RA on request (BZ#665)Denis Ovsienko
This implements a new "ipv6 nd mtu <1-65535>" interface-level command. * doc/ipv6.texi: add description * zebra/rtadv.c * rtadv_send_packet(): send option type 5, when configured * ipv6_nd_mtu(): new VTY helper * no_ipv6_nd_mtu(): ditto * rtadv_config_write(): add new option * rtadv_init(): list new helpers
2012-01-08doc: "[no] router zebra" does not belong to ospfdDenis Ovsienko
2012-01-02doc: update BGP RFC referencesDenis Ovsienko
2011-12-13build: delete .cvsignore filesDenis Ovsienko
2011-11-22doc: rectify "match ip next-hop" in ripd (BZ#537)Roderick Schertler
2011-09-27doc: BGP route-flap dampeningAlexandre Chappuis
2011-09-27doc: add missing wordAlexandre Chappuis
* ospfd.texi: Adjust meaning of the rfc1583compatibility option in order to match the RFC specification and the actual source code.
2011-03-30doc: Add dependency for quagga.pdf make targetPaul Jakma
* doc/Makefile.am: pdf target needs to depend on all the input files.
2011-03-21bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
2011-03-18doc: fix "ipv6 address" interface command syntax (#608)Denis Ovsienko
2010-04-28build: ignore mkinstalldirs and texinfo.texDavid Lamparter
these are autogenerated by autoreconf, drop them from git.
2010-03-11doc: fixed spelling in bgpd.texiIvan Moskalyov
2009-07-21[doc] zebra.8 via Christian Hammers (#531)Thijs Kinkhorst
The man page for zebra(8) mentions as port number to connect to 2602, but it's acutally 2601 (as shown in /etc/services). 2602 belongs to ripd. Attached patch fixes this typo.
2009-06-23RFC 4191 Default Router Preference support for router advertisementsChris Caputo
Adds "ipv6 nd router-preference (high|medium|low)" and "no ipv6 nd router-preference" interface commands. Files modified: doc/ipv6.texi zebra/interface.c zebra/interface.h zebra/rtadv.c zebra/rtadv.h Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-22[doc] remove -dither arg to imagemagick, in building PDFsPaul Jakma
* doc/Makefile.am: arguments for the 'convert' programme seem to have changed incompatibly at some stage - just remove the problematic -dither.
2009-06-19[build] cleanup low-hanging autoreconf warningsJeremy Jackson
Some uses of GNU make extensions were not necessary. There are still some, but they might exist as workarounds for older versions of autoconf that have since been solved. Lesson learned: implicit target rules have opposite order to pattern target rules.
2009-06-18[doc] Removes documentation of nonexistant option.Jeremy Jackson
Expansion of Ubuntu quagga-0.99.11-1 30_doc__ospfd.8__nolog.dpatch
2009-06-01[doc] Stick with quagga.net for consistency (#436)Denis Ovsienko
2008-08-22[administrivia] Update gitignore filesPaul Jakma
- Add more stuff, archive libraries, etc..
2008-08-22[administrivia] Git should ignore backup files and .loT filesPaul Jakma
2008-08-22[trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma
2008-08-22[git administrivia] remove auto-built quagga.info, add to gitignore.Paul Jakma
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-08-06[bgpd] Add support for AS_PATHLIMIT / draft-ietf-idr-as-pathlimitPaul Jakma
2007-07-31 Paul Jakma <paul.jakma@sun.com> * (general) Support for draft-ietf-idr-as-pathlimit-03. * bgp_attr.h: (struct attr) Add pathlimit struct bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. (attrhash_key_make) tally pathlimit too (attrhash_cmp) cmp pathlimit attr (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. (bgp_attr_parse) ditto (bgp_packet_attribute) Write out AS_PATHLIMIT when set (bgp_dump_routes_attr) ditto * bgp_route.h: (struct bgp_static) Add TTL field * bgp_route.c: (bgp_announce_check) Drop paths that are over their hop-count TTL before sending via EBGP. Mangle ASN in pathlimit for confeds/private as best we can. (bgp_static_update_{rsclient,main}) Add any configure pathlimit information. (bgp_pathlimit_update_parents) New, update atomic-aggr setting for parents of an aspathlimit'ed static. (bgp_static_set) Add TTL argument, for all the 'bgp network' commands. Call previous for TTL changed statics. (bgp_static_unset) Call pathlimit_update_parents. (various bgp network commands) Add 'pathlimit <0-255>' qualifier to all the various forms, bar route-map - which can set ttl itself. * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and 'match pathlimit as'. * doc/bgpd.texi: Document 'network ... pathlimit <ttl>'
2007-05-02[zebra] Routemap support on received routes, with 'set src' command (linux)Paul Jakma
2007-05-01 David L Stevens <dlstevens@us.ibm.com> * (general) These changes collectively add route-map and prefix-list support to zebra and fix a bug in "show route-map" (with no argument). * doc/main.texi: added route-map, prefix-list, ip protocol and set src documentation * lib/command.h: added PROTOCOL_NODE type * lib/log.c: (proto_name2num) new function, protocol name to number translation. * lib/routemap.c: (vty_show_route_map) fixed "show route-map" without route-map name * lib/routemap.h: added RMAP_ZEBRA type * lib/zebra.h: added proto_name2num() prototype * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and plist * vtysh/Makefile.am: added zebra_routemap.c * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP * zebra/connected.c: (connected_up_ipv4) added src preference argument to rib_add_ipv4() * zebra/kernel_socket.c: (rtm_read) ditto * zebra/main.c: added prefix list initialization * zebra/Makefile.am: added zebra_routemap.c source file * zebra/rib.h: added generic address union "g_addr" and use in existing places that had an explicit union. Added "src" to struct nexthop. Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4. * zebra/rt_netlink.c: (netlink_routing_table) set preferred source on netlink messages. (netlink_route_change) ditto (netlink_route_multipath) ditto. * zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to rib_add_ipv4() call. * zebra/rtread_proc.c: (proc_route_read) ditto * zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument. (nexthop_ipv4_ifindex_add) ditto (rib_add_ipv4) ditto (nexthop_active_check) Add route-map processing. * zebra/zebra_routemap.c: new file for zebra route-map commands. * zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol (vty_show_ip_route_detail) added "src" printing (vty_show_ip_route) ditto (show_ip_protocol_cmd) new command, list routemaps. (config_write_protocol) write out routemap protocl config. (zebra_vty_init) Install the new routemap protocol commands. * zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg (zebra_init) init zebra route-maps. * zebra/zserv.h: add zebra_route_map_init
2007-04-30[ospfd] network command now behaves more logically when a peer prefix is definedAndrew J. Schorr
2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd/ospfd.c: (ospf_network_match_iface) Comment out COMPATIBILITY_MODE. Going forward, the ospf "network" command will use a simple test: does the network command prefix contain the connected (destination) prefix of the interface? * doc/ospfd.texi: Add a paragraph to the description of the OSPFv2 network command to explain how we handle interfaces with peer addresses.
2007-04-29[logging] Add new "log timestamp precision" command for subsecond timestampsAndrew J. Schorr
2007-04-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * basic.texi: Document the new 'log timestamp precision' command.
2007-03-21[doc] Makefile VPATH patchAndrew J. Schorr
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * Makefile.am: Patch rule for draft-zebra-00.txt to work in VPATH build environments.
2006-07-28[doc] Expand/cross-ref MD5 commands, tweak anchors to avoid added spacingPaul Jakma
2006-07-28 Paul Jakma <paul.jakma@sun.com> * main.texi: link-detect works on Solaris too. * ospfd.texi: Twiddle around with anchors a bit more. Clarify how setting MD5 auth by area and by interface interact, and add cross-references, as well as to the required command for setting key material.
2006-07-27[doc] minor tweaks, refine ospf redist,passive-inter, and abr-type helpPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * quagga.texi: Remove unused index definitions Add an Index node - for the concept index. * routeserver.texi: Set exampleindex to 0, so the example configs with long IPv6 addresses stand better chance of fitting. * overview.texi: 'Supported RFC' -> 'Supported RFCs' Remove paragraph indentation - texinfo does that. Revise the supported OS list slightly. Remove the IPv6 stack list, seems very dated and irrelevant. Revise the 'How to get Quagga' section. * ospfd.texi: minor tweaks: add some anchors, fix some minor format issues. Revise the help for 'abr-type'. Note that text authentication is unwise, recc'd MD5. Add some extra text for redistribute and passive-interface, about how latter can substitute for redist connected.
2006-07-27[vtysh] Never skip authentication, and add support for multiple -c commandsAndrew J. Schorr
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vtysh.1: Document new options -d and -E, and note that now multiple -c options may be supplied, with embedded linefeed now supported. In BUGS section, remove warning about vtysh causing a daemon to freeze, since this has been fixed. * vtysh_main.c: (usage) Add new -d and -E options. And note that -c can be used multiple times, possibly with embedded linefeeds. (longopts) Add new -d and -E options. (main) Add new -d and -E options, and create a linked list to support multiple -c options. Do not call vtysh_connect_all until after vtysh_read_config(config_default) and vtysh_auth have succeeded. This prevents the vtysh.conf file from configuring any daemons, and it ensures that authentication has been passed before we send any commands to any daemons. Call vtysh_connect_all with any daemon name supplied with -d. If it is unable to connect to any daemons, issue an error message and exit immediately. When used in -c mode, call vtysh_execute("enable") before executing the commands in order to match interactive behavior. And detect embedded linefeed chars in -c commands and break them up appropriately. * vtysh.h: (vtysh_connect_all) Fix proto to reflect new daemon_name argument, and that it now returns an integer -- the number of daemons to which we were able to connect. * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. If supplied, connect only to that daemon. And return the number of daemons to which we were able to connect. (vtysh_prompt): Performance enhancement -- make struct utsname static so we call uname to get the hostname only once.
2006-07-04[doc] remove the auto-generated quagga.info file from CVSPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * quagga.info: remove auto-generated file. It will still be present in dist tarballs, so shouldn't affect anyone but direct users of CVS. Required texinfo version should be widely available. * .cvsignore: ignore quagga.info
2006-06-29[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"Andrew J. Schorr
2006-06-28 Erik Muller <erikm@internap.com> * ospfd.h: Define 2 new struct ospf config flags: OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL * ospf_nsm.c (nsm_change_state): Log adjacency changes if requested. * ospf_vty.c (ospf_log_adjacency_changes): New command function to implement ospf subcommand "log-adjacency-changes [detail]". (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. (show_ip_ospf) Show whether adjacency changes are logged. (ospf_config_write) Add "log-adjacency-changes [detail]" to config. (ospf_vty_init) Add ospf_log_adjacency_changes and no_ospf_log_adjacency_changes. * ospfd.texi: Document new ospf router subcommand "log-adjacency-changes [detail]".
2006-06-26[doc] OSPF MD5 keyid documentation, fix texinfo warnings in bgpd.texiPaul Jakma
2006-06-26 Paul Jakma <paul.jakma@sun.com> * ospfd.texi: Document that MD5 keyid is part of the protocol. * bgpd.texi: shut texinfo warnings up by replacing brackets in variable with angle brackets.
2006-05-23[doc] document neighbor ..... update-sourcePaul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * bgpd.texi: Document the update-source command.
2006-05-10[doc] Update auto-generated quagga.infoPaul Jakma
2006-05-10 Paul Jakma <paul.jakma@sun.com> * quagga.info: update auto-built file.
2006-05-08[doc] bug #245, remove reference to non-existent log_mode argumentPaul Jakma
2006-05-08 Paul Jakma <paul.jakma@sun.com> * main.texi: --log_mode does not exist, remove, bug #245.
2006-05-04[docs] Update ripd docs on version and authentication, see bugs #261,#262Paul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * ripd.texi: Add Version Control as a distinct section. Expand Version Control section with overview text, touching on insecurity of RIPv1 and referencing authentication section, cleanup text of various version commands. RIP Authentication: Add overview text, refer to RIPv1 version control, which is required to completely secure RIP.
2006-04-03[doc] document version zserv header, add txt figures, make pdf figs nicerPaul Jakma
2006-03-31 Paul Jakma <paul.jakma@sun.com> * fig*.txt: New files, txt versions of the diagrammes for the info file. * protocol.texi: Document the new version 1 header. * routeserver.texi: Explicitly specify scaling widths for the figures, only way to make them look reasonable, sadly. Try fix some formatting and explicitely note lists as being bulleted. * Makefile.am: convert seems to do png to pdf just fine. No need for intermediate eps. Add txt figure expansions and list as dependencies and EXTRA_DIST files.
2006-02-19[doc] Credit Jeroen Simonetti for contributing snmptrap.texiPaul Jakma
2006-02-19 Paul Jakma <paul.jakma@sun.com> * quagga.info: update auto-built file. * ChangeLog: Fix old, existing entry for snmptrap.texi addition to credit the author, who got in touch with me. * snmptrap.texi: Add comment line with author's details.
2006-01-19[version] bump configure.ac version number to 0.99.3paul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * configure.ac: Bump to 0.99.3 * doc/quagga.info: update auto-built file.
2005-11-252005-11-25 Paul Jakma <paul.jakma@sun.com>paul
* texinfo.tex: update to newer version, seems to now properly scale the diagramme images in PDF output.
2005-11-11[doc] quagga.info updated /again/ due to version bump, d'oh.paul
2005-11-11- commit the actual file..paul