| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
|
|
* bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
|
|
makeinfo:
* Don't attempt to generate it after every ./configure.
* Don't remove it while cleaning up.
|
|
* quagga.info: Add generated file to CVS, as it requires most recent
texinfo to build, until such time as texinfo 4.7 is more
prevalent.
|
|
* routeserver.texi: Strip ctrl-M from line endings, note by
sigma@smx.pair.com
|
|
|
|
* Makefile.am: Add routeserver.texi to quagga_TEXINFOS.
Add quagga.info to clean files list (would have thought automake
would have done this, but it doesnt seem to)
|
|
* quagga.texi: include routeserver.texi. TODO: integrate the current
multiple-instance orientated bgpd route-server section with the
new route-server docs.
|
|
* Makefile.am: Add automatic rule to build pdf's from eps figures.
Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern
probably otherwise will override automake's rule for quagga.pdf)
* overview.texi: URL was causing TeX overfull, put on newline.
* quagga.texi: Put the copyright notice into @copying section, as
is proper. Strip trailling space from the main menu lines.
* rip(ng)?d.texi: Minor reformatting.
* Add the route server docs.
* bgpd.texi: remove unneeded page breaks. The 6Bone example
overflows though.
|
|
* Add the route server docs.
* routeserver.texi: new file, texinfo'fied and slightly modified
version of the original TeX from James Luis Rubio.
* fig-*.eps: new files, diagrammes.
|
|
* defines.texi.in: New file, texi variables should be set here,
autoconf substitution is available. Define common AUTHORS,
COPYRIGHT_YEAR and COPYRIGHT_STR vars.
* (global): Make use of makeinfo node pointer auto-creation
to avoid having to fully specify links for nodes, so we only have
to specify current node name - simplifies text slightly.
Remove extraneous newlines which appear to cause extra blank pages
to be added in output.
Update copyright strings which appear in various places to
use the new COPYRIGHT_STR texinfo variable.
Change url to uref, the former need not output an actual
hyperlink depending on version of texinfo, the latter should if
supported by the format (eg PDF).
* texinfo.tex: Update to a more recent version. previous file
was many many years old. This file should possibly be removed
altogether, and allowed to be installed by automake.
* quagga.texi: Make use of automake's version.texi feature to
have VERSION and some other vars auto-defined. include
defines.texi. Change copyright strings to use the COPYRIGHT_STR
variable.
* install.texi: Make the privs section an actual section. Ditto for
the Linux notes.
* overview.texi: Supply URL for Quagga, where format allows. Tidy up
one or two paragraphs slightly.
Update the section on supported platforms.
Remove the ZNOG list stuff, direct reader to the website for
further information on email lists.
* vtysh.texi: Update the integrated config file section. Make the
commands sections so correct PDF indexes are built.
|
|
|
|
with CVS trees.
|
|
|
|
|
|
|
|
|
|
* ospfd.texi: reformat the ospf md5 paragraph, add an additional
way to work around bad clocks.
|
|
|
|
|
|
|
|
* doc/quagga.texi: Update copyright. Contents should be at beginning
of docs...
* redhat/quagga.spec.in: wee keep_build define, to keep build dir.
|
|
* ospfd.texi: OSPF MD5 auth requires stable time.
|
|
daemon to change netlink receive buffer size.
|
|
|
|
|
|
Vtysh man page looks already how it should look IMHO, the rest need more
work.
|
|
|
|
* snmp.texi: updated (rewritten almost)
|
|
Remove disthook that removed the crud that was copied in due to this.
|
|
|
|
|
|
* Correct RIP port, s/521/520/, reported by xantius@xantius.com
|
|
very annoying to have both obsolete "prefix-advertisement" and "prefix" in
completion. We will break configuration anyway with secondary cleanup, so
just remember mention it in release notes.
|
|
|
|
|
|
warnings and update documentation.
|
|
|
|
review and fix my awful english ;).
|
|
|
|
* replace -e with -c
* don't save command in history if last line is the same one
* doc/help fixes
|
|
|
|
|
|
|
|
|
|
|
|
* lib/version.h: moved to version.h.in
* lib/version.h.in: New file, from version.h. Change hardcoded
package name and version to use the autoconf defined substition
variables.
* configure.ac: Fix up AC/AM_INIT* to new style. Remove the sed'ing
through lib/version.h for VERSION. Add lib/version.h to the
AC_OUTPUT list. Update the text output of quagga version at end
of configure run to use PACKAGE_VERSION.
* doc/.cvsignore: ignore quagga.pdf
* doc/.cvsignore: ignore version.h, its now autogenerated.
|
|
* doc/Makefile.am: zebra.texi went to quagga.texi, so the automake
dependency must change too.
|
