summaryrefslogtreecommitdiff
path: root/lib/ChangeLog
AgeCommit message (Collapse)Author
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-10-15[lib] Handle upgrade from SUNWzebra to Quagga for 'interface fooX:Y' commandsPaul Jakma
2006-10-14 Paul Jakma <paul.jakma@sun.com> * if.c: (general) Handle upgrades from SUNWzebra, which tried to track each logical interface as a seperate struct interface, to Quagga, which assigns only one struct interface per ifindex. (if_sunwzebra_get) Try decompose a logical interface name (fooX:Y) to the 'primary' name (fooX), for Solaris. (interface_cmd) Use if_sunwzebra_get on Solaris.
2006-09-26[snmp] Fix asn_build calls to pass correct variable sizes (fixes 64-bit issues)Andrew J. Schorr
2006-09-26 Pierre-Yves Ritschard <pierre-yves@spootnik.org> * smux.c: (smux_open,smux_trap,smux_register) Fix various asn_build_* calls to pass the proper length in the final argument: use sizeof(<variable>) instead of sizeof(<type>), since there were several inconsistencies between the actual variable type and the size that was passed. This should fix some problems on 64-bit architectures where sizeof(int) != sizeof(long).
2006-08-27[lib] Bug #134: threads should be more robust against backward time jumpsPaul Jakma
2006-08-25 Paul Jakma <paul.jakma@sun.com> * thread.c: (general) Add support for monotonic clock, it may still jump forward by huge amounts, but should be immune to going backwards. Fixes bug #134. (quagga_gettimeofday_relative_adjust) helper, does what name says - adjusts gettimeofday based relative timer. (quagga_gettimeofday) helper to keep recent_time up to date. (quagga_get_relative) helper, update and getch the relative timer using gettimeofday(). POSIX CLOCK_MONOTONIC is also supported, but the code is not enabled yet nor tested. (quagga_real_stabilised) helper, retrieve absolute time but stabilised so as to never decrease. (quagga_gettime) Exported interface, analogous to POSIX clock_gettime() in interface, supporting several clocks. (quagga_time) Exported interface, analogous to traditional time(), will never decrease. (recent_relative_time) Convenience function to retrieve relative_time timeval, similar to existing recent_time absolute timeval, for when an approximately recent value will do. (remainder) Update to use above helpers. (thread_getrusage) Previously was a macro, but needs to be a function to twiddle with thread.c private stuff. * thread.c: Point the GETRUSAGE macro at previous function. Export quagga_gettime, quagga_time and recent_relative_time for general use.
2006-07-25[lib] Optimise thread_call by caching pointer to thread history in the threadPaul Jakma
2006-07-25 Paul Jakma <paul.jakma@sun.com> * thread.h: (struct thread) Add a cache pointer to the struct cpu_thread_history, if it is known - saving hash lookup on each thread_call. * thread.c: (thread_call) Cache the pointer to the cpu_thread_history, so that future thread_calls of same thread can avoid the hash_lookup.
2006-07-11[lib] Do not call vty_close in vty_log_out to avoid possible free memory accessAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Do not call vty_close, because this could result in a parent function's accessing the freed memory. Instead, set status VTY_CLOSE and call shutdown(vty->fd, SHUT_RDWR). And add a comment on vty_close.
2006-07-10[lib] Fix infinite recursion for errors on vtys with terminal monitor enabledAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out, vty_read, vty_flush, vtysh_flush, vtysh_read) After an I/O error, must set vty->monitor to 0 before calling zlog_warn, otherwise an infinite recursion could occur (since zlog_warn triggers a message to be written to the vty, and that in turn triggers another error message when it fails, etc.).
2006-07-03[debug] Debug messages to terminal vty sessions should include timestampsAndrew J. Schorr
2006-07-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Debug messages to terminal vty sessions should include timestamps.
2006-06-30[lib] Fix merge error in ChangeLogPaul Jakma
- entry was left in wrong order, according to date.
2006-06-30[lib] Fix typo in cpp conditional for malloc.h includePaul Jakma
2006-06-28 Paul Jakma <paul.jakma@sun.com> * memory.c: Fix typo in cpp conditional around malloc.h, from comment in bug #269.
2006-06-27[lib] Remove numeric route-type argument in redistribute arg stringsPaul Jakma
2006-06-27 Paul Jakma <paul.jakma@sun.com> * route_types.awk: Remove setting the 'bare' numeric route type in redist strings.
2006-06-27[lib] Centralise Zserv route type information, auto-generate redist stringsPaul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * route_types.txt: New file, table of ZEBRA_ROUTE definitions. * route_types.awk: New script, to parse previous and generate (for now) redistribute string defines. * Makefile.am: build route_types.h using previous two, ala memtypes.h, include the script and table file in EXTRA_DIST. * command.h: pull in route_types.h, add a REDIST_STR define.
2006-06-15[zebra] remove internal if_flag_dump, use libzebras version.Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * lib/if.c: (if_flag_dump) remove the whitespace indentation, callers should provide. * zebra/interface.c: (if_flag_dump_vty) redundant code, remove. (if_dump_vty) use libzebra if_flag_dump.
2006-06-15[lib] list_delete shouldn't duplicate list_delete_all_nodePaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * linklist.c: (list_delete) call list_delete_all_node, don't duplicate it.
2006-06-15[lib] Experimental: have XFREE NULL out the freed pointerPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * memory.h: Experimental, have XFREE macro NULL out the freed pointer.
2006-06-15[lib] Fix vector leak in error path in command.c, CID #38Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * command.c: (cmd_describe_command_real) Fix leak, CID #38.
2006-05-28[lib] Add support for Sun libc printstack to zlog_backtrace_sigsafePaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * configure.ac: Check for Sun libc printstack(), add a general HAVE_STACK_TRACE define for lib/log.c, if any supported stack symbol dumping function is found (glibc backtrace/sun libc printstack). * log.c: (general) Add support for Sun libc printstack(). (hex_append) make the cpp conditional on general HAVE_STACK_TRACE define. (zlog_backtrace_sigsafe) Ditto. Add printstack() version of the the DUMP macro in this function.
2006-05-28[lib] vty_log shouldn't crash if called when vty isn't initiliasedPaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_log/vty_log_fixed) dont crash if called when vty hasn't been initiliased.
2006-05-28[lib] malloc.h is deprecated, try not to include it anymorePaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * memory.c: malloc.h is deprecated in favour of stdlib.h, however we still need it on GNU Libc for mallinfo().
2006-05-28[lib] include inttypes.h rather than stdint.h, provide defines where missingPaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * zebra.h: Include inttypes.h rather than stdint.h, best practice according to the autoconf manual. Add UINT*_MAX defines for older platforms lacking these (FBSD 4)
2006-05-21[interface configuration] Try to avoid losing address info after shutdown.Andrew J. Schorr
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Document the meaning of the ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags. * connected.c: (connected_withdraw) Do not delete the connected address if the ZEBRA_IFC_CONFIGURED flag is set. (connected_add_ipv4,connected_add_ipv6) Before calling connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag on the superseded connected structure.
2006-05-15[lib] Add string mapping table for Zserv commandsPaul Jakma
2006-05-15 Paul Jakma <paul.jakma@sun.com> * log.c: (general) Generalise struct zebra_route_desc into struct zebra_desc_table and, similar to route_types, add a command_types table to describe Zserv protocol commands. (route_types[]) use a macro to use designated initialisers while avoiding tedious duplication. (zserv_command_string) lookup string from zebra_desc_table, similar to zebra_route_string * zebra.h: Add declaration for zserv_command_string, adjust the comments to reflect zebra_desc_table.
2006-05-15[lib] CID #39, Fix the vty completion leak-fix to only free when desiredPaul Jakma
2006-05-13 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_describe_command) CID #39 fix was too hasty, just cause it /can/ leak doesn't mean it always will have, check first.
2006-05-12[lib] CID #55, fix return of freed pointer, cmd_describe_command_realPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * command.c: (cmd_describe_command_real) Fix return of freed pointer when no-match, CID #55.
2006-05-12[lib] CID #39, fix leak in error path, vty_describe_commandPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_describe_command) fix leak of describe vector in error path, CID #39.
2006-05-12[lib] CID #37, fix error case leak, cmd_complete_command_realPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * command.c: (cmd_complete_command_real) Fix leak of cmd_vector in error case, Coverity CID #37.
2006-05-12[lib] CID #3, fix forward-null errors in vty_prefix_list_uninstallPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * plist.c: (vty_prefix_list_uninstall) Fix potential NULL deref of prefix and typestr strings, Coverity CID #3.
2006-03-30[lib] command.c exports host global, add it to header.Paul Jakma
2006-03-14 Paul Jakma <paul.jakma@sun.com> * privs.c: (zprivs_caps_init) Change user IDs before lowering privileges, while this seems to work on Linux, on Solaris it rightfully refuses due to PRIV_PROC_SETID having been dropped. * command.h: Add the struct host global exported from command.c
2006-03-30[lib] Trivial: fix line lengths of a comment in workqueu.cPaul Jakma
2006-03-30 Paul Jakma <paul.jakma@sun.com> * workqueue.c: (work_queue_run) fix line length of comment
2006-03-30[lib] Mark most arguments in DEFUN_CMD_FUNC_TEXT as potentially unusedPaul Jakma
2006-03-30 Paul Jakma <paul.jakma@sun.com> * command.h: (DEFUN_CMD_FUNC_TEXT) Annotate arguments as potentially being unused.
2006-03-30[lib] fix gensub call in memtypes.awk to pass "g", not g.Paul Jakma
2006-03-27 Paul Jakma <paul.jakma@sun.com> * memtypes.awk: Fix gensub call, g should be a string..
2006-03-30[lib] status field/flags no longer used in struct workqueuePaul Jakma
2006-03-25 Paul Jakma <paul.jakma@sun.com> * workqueue.h: (struct work_queue) Remove status field and state flag, no longer used.
2006-03-30[bgpd] trivial: use a distinct memtype for struct bgp_synchronizePaul Jakma
2006-03-19 Paul Jakma <paul.jakma@sun.com> * memtypes.c: Add MTYPE_BGP_SYNCHRONISE. * bgp_advertise.c: Use a distinct memory type for struct bgp_synchronize.
2006-03-30[lib] fix libtool version argument in Makefile.amPaul Jakma
2006-03-16 Paul Jakma <paul.jakma@sun.com> * Makefile.am: Fix -version-info argument.
2006-03-30[lib/memory] Add mallinfo supportPaul Jakma
2006-02-15 Paul Jakma <paul.jakma@sun.com> * configure.ac: Check for mallinfo, being careful to link test so we can detect things like umem being used (which doesn't provide a mallinfo). * lib/memory.c: (mtype_memstr) new helper function to return human friendly string for a byte count. (mtype_stats_alloc) new function, for users to retrieve number of objects allocated. (show_memory_mallinfo) New function, show mallinfo statistics if available. (show_memory_all_cmd) Call show_memory_mallinfo, if mallinfo is available. * lib/memory.h: Export mtype_memstr and mtype_stats_alloc. Provide a define for a reasonable buffer size for mtype_memstr.
2006-03-30[lib/privs] Changing user IDs should be done before dropping privilegesPaul Jakma
2006-03-14 Paul Jakma <paul.jakma@sun.com> * privs.c: (zprivs_caps_init) Change user IDs before lowering privileges, while this seems to work on Linux, on Solaris it rightfully refuses due to PRIV_PROC_SETID having been dropped.
2006-03-06[lib] export show_address_cmd debug command in if.hPaul Jakma
2006-03-06 Paul Jakma <paul.jakma@sun.com> * if.h: export show_address_cmd, for anyone who wishes to use it.
2006-02-21[lib/sockunion] trivial: use XSTRDUP.Paul Jakma
2006-02-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: (sockunion_{su2str,log}) Use XSTRDUP. Particularly with _su2str, as that string gets XFREEd, which can be annoying if run debug code in memory.c.
2006-02-02[lib/workqueue] remove the useless 'delay' factor.paul
2006-02-02 Paul Jakma <paul.jakma@sun.com> * workqueue.h: (struct work_queue) Remove the delay field. It served no purpose and just introduced bad behaviour. Should be excised before its allowed to escape into 1.0. This removes need for the 'flood' and runs_since_clear fields. * workqueue.c: (general) excise delay factor between queue runs, hence the 'flood' crap too.. See above. * bgp_route.c: (bgp_{clear_node,process}_queue_init) delay field is removed from workqueue spec.
2006-01-19[lib/stream] small compile fix, use uint64_t, not u_int64_t.paul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * stream.c: (stream_getq_from) should use POSIX uint64_t not u_int64_t. Latter is neither a traditional BSD type, nor a POSIX type.
2006-01-172006-01-17 Vincent Jardin <vincent.jardin@6wind.com>vincent
* md5.c: Don't forget to keep const. * regex.c: Cleanup code and remove warnings.
2006-01-17[lib/zclient] Export zclient_create_headerpaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * zclient.{c,h}: (zclient_create_header) export this, seems others could use it (in lieu of more complete zserv helpers).
2006-01-17[lib/vty] Add 'no terminal monitor' aliaspaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * vty.c: (no_terminal_monitor_cmd) New ALIAS for terminal_no_monitor, in the more normal negating format, to be kind to my fingers. (vty_init) install new ALIAS.
2006-01-17[lib/md5] md5_loop should take void pointer for more useful caller warnings.paul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * md5.{c,h}: (md5_loop) Is better off taking a void * and doing cast to byte wise type internally, avoids needs for casts in users.
2006-01-16[zserv] Extend Zserv header with version information and marker fieldpaul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * lib/zclient.h: Update the Zserv protocol header with a version field. Define the old command field to be a 'marker', to allow old Zserv and updated Zserv to be differentiated. Future updates will bump the version field obviously. New command field is made wider. Try to stop using the 'zebra_size_t' typedef in the callbacks. * lib/zclient.c: Update to read/write new format header. * zebra/zserv.c: Ditto
2006-01-11[zserv] Update interface flags to 8 bytes wide.paul
2006-01-11 Paul Jakma <paul.jakma@sun.com> * if.h: (struct interface) expand flags to 8 bytes. * zclient.c: (zebra_interface_{add,state}_read) stream read of interface flags now need to use stream_getq. (zebra_interface_if_set_value) ditto 2006-01-11 Paul Jakma <paul.jakma@sun.com> * zserv.c: (zsend_interface_{add,delete,update}) if flags are 8 bytes now, update to write out with stream_putq.
2006-01-10[stream] Add quad-word support and stream_resizepaul
2006-01-10 Paul Jakma <paul.jakma@sun.com> * stream.c: (stream_new) Allocate stream data as seperate object. (stream_free) free the data. (stream_resize) new function, resize stream to new size. (stream_{get,put}q*) new functions to get/put quad word size types. * stream.h: (struct stream) make data seperate from the stream. Export new stream_resize and quad-word get/put functions.
2005-12-292005-12-29 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* vty.c (vty_hello): add cast to quiet lint (from David Young) (patch-lint)
2005-11-26[c99] change gcc zero-length array to C99 flexible array declarationpaul
2005-11-26 Paul Jakma <paul.jakma@sun.com> * buffer.c: (struct buffer_data) change gcc zero array declaration to C99 incomplete array. * stream.h: (struct stream) same * ospf_api.c: (struct opaque_lsa) same
2005-11-24[lib/zebra.h] fix Linux compile errorpaul
2005-11-24 Paul Jakma <paul.jakma@sun.com> * zebra.h: s/u_int/unsigned int/, u_int is a BSD type, defining __USE_BSD on Linux pulls in further things from netinet/ip.h which dont preprocess for some reason. There is no C99 shorthand type directly equivalent to u_int afaict, so don't use it.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-05 14:47:58 +0000