summaryrefslogtreecommitdiff
path: root/lib/ChangeLog
AgeCommit message (Collapse)Author
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.c: (config_write_host) Note that "log trap" is deprecated when writing out the config.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* HACKING: Indicate that header files should be consulted for documentation, particularly logging levels in lib/log.h. * log.h: Document appropriate use of syslog logging priorities inside quagga.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.h: Remove fields log_stdout and log_syslog from struct host, since they are just trying to duplicate information in the zlog_default structure. Note that this fixes a bug since those fields were not registering any logging that was established in the initial call to openzlog (this affects only the zebra and ospf6d daemons). It is probably a bug to turn on any logging by default in the call to openzlog. * command.c: (config_write_host) Get logging info from zlog_default instead of now-removed fields host.log_stdout and host.log_syslog. (config_log_stdout,no_config_log_stdout) Do not set now-removed field host.log_stdout, since this info is recorded in zlog_default. (config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile. (config_log_syslog,config_log_syslog_facility,no_config_log_syslog) Do not set now-removed field host.log_syslog, since this info is recorded in zlog_default.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-282004-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Remove several unused fields from struct zlog. Add comments for other fields, and add one new field syslog_options that is used in the new syslog_sigsafe implementation. * log.c: (syslog_sigsafe) New function to send syslog messages in an async-signal safe way that can be used inside a signal handler. (syslog_connect) New function to connect to syslog daemon inside a signal handler. This function supports only systems where /dev/log is a unix datagram socket (e.g. not Solaris). (zlog_signal) Call syslog_sigsafe if syslog logging is enabled. (zlog_backtrace_sigsafe) Call syslog_sigsafe if syslog logging is enabled. (openzlog) Save syslog_options for use in syslog_sigsafe. (num_append) Fix bug: handle 0 properly. (hex_append) New function to print a u_long in hex format.
2004-11-28DEFUN_DEPRECATED passes attribute to DEFUN as well.hasso
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c, log.h, memory.c: Change function name from zlog_backtrace_safe to the more self-explanatory zlog_backtrace_sigsafe.
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* debug.[ch]: Remove unused files. * Makefile.am: Remove references to debug.c and debug.h * ospf_main.c: Remove #include "debug.h" (was not being used, and lib/debug.h has now been deleted).
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (zlog_backtrace) New function to log a backtrace. (zlog_backtrace_safe) Log a backtrace in an async-signal-safe way. Unfortunately, this function does not support syslog logging yet. (zlog_signal) Move backtrace code into separate function zlog_backtrace_safe. (_zlog_assert_failed) Call zlog_backtrace before aborting. * log.h: Declare new functions zlog_backtrace and zlog_backtrace_safe. * memory.c: (zerror) Call zlog_backtrace before aborting.
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* Makefile.am: Need to add zassert.h to pkginclude_HEADERS.
2004-11-252004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: If not C99 and there's no va_copy macro and there is a __va_copy macro, define va_copy as __va_copy.
2004-11-252004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* pid_output.c: (pid_output_lock) Fix 2 bugs: when locking, should set l_whence to SEEK_SET, not SEEK_END. And after writing new pid to file, must ftruncate to eliminate any extraneous bytes left over from the last time a pid was written.
2004-11-242004-11-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zassert.h: New header file to declare a quagga-specific assert macro. * log.c: (_zlog_assert_failed) New function called when assert fails to log the error and abort. * zebra.h: Include "zassert.h" instead of <assert.h>. * regex.c: Include "zassert.h" instead of <assert.h>. * dict.c: Include "zassert.h" instead of <assert.h>.
2004-11-232004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* sigevent.c: (signal_init) Set up some default signal handlers so that processes will issue an error message before terminating or dumping core. (trap_default_signals) New function to set up signal handlers for various signals that may kill the process. (exit_handler) Call zlog_signal, then _exit. (core_handler) Call zlog_signal, then abort. * log.h: Declare new function zlog_signal. * log.c: (zlog_signal) New function to log information about a received signal before the process dies. Try to log a backtrace also. (quagga_signal_handler,signal_set) Should be static.
2004-11-232004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (vzlog) Take a single va_list argument and use va_copy as necessary for multiple traversals. (zlog) Pass only one va_list to vzlog. (zlog_*,plog_*) Use a macro for boilerplate code; pass only one va_list to vzlog. (zlog_set_file) Remove unused 2nd argument (flags). (zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions. * log.h: Remove ZLOG_*_INDEX defines (no longer used). Remove unused 2nd argument from zlog_set_file prototype. Fix prototype for zlog_rotate. * command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file. * vty.c: (vty_out) Fix stdarg usage to perform multiple traversals properly. (vty_log) Must use va_copy for multiple traversals of va_list arg.
2004-11-192004-11-19 David Young <dyoung@pobox.com>ajs
* log.c: (safe_strerror) New function: safe wrapper for strerror.
2004-11-192004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* sockopt.c: (setsockopt_so_recvbuf) Stop error message from being printed every time.
2004-11-162004-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* memory.h: Fix prototype for memory_init(). * memory.c: Declare many functions and data structures static instead of global. Fix prototype for memory_init().
2004-11-15Rationalize CMSG_SPACE usage:gdt
in lib/zebra.h, ensure that RFC3542-required CMSG_SPACE and CMSG_LEN are defined. Warn if alignment assumptions are made, since they are i386-centric. in lib/sockopt.h, declare that sockopt sizes are without CMSG_SPACE-required padding - just simple sizeof. in ospfd/ospf_packet.c, simply use CMSG_SPACE This should remove all instances of CMSG_ALIGN from the source code. This is a nonstandard, though rational, construct; quagga should use only those defines in RFC3542.
2004-11-152004-11-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* memory.c: (zerror) Use zlog_err instead of fprintf to stderr. Instead of exiting, log currenty memory usage and then abort. (log_memstats) New function to log memory statistics, called by zerror. (show_memory_all) Loop over new mlists array instead of calling show_memory_vty separately for each memory_list.
2004-11-08Oops, wrong date on changelog entries..paul
2004-11-082004-11-07 Paul Jakma <paul@dishone.st>paul
* buffer.c: Add missing include of log.h. (buffer_flush_available) written is compared against mostly against unsigned types, only for the writev do we need signed compare, so declare it as size_t and cast it to ssize_t just for the error compare when we've called writev. * buffer.h: Add comment that buffer data sizes really should be size_t.
2004-11-072004-11-07 Paul Jakma <paul@dishone.st>paul
* lib/version.h.in: add autoconf configure_input output var
2004-11-052004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE capabilities (that were used only in bgpd/bgp_route.c and are now removed). Also remove some other fields that were not being used at all. * vty.c: (vty_execute) Do not test for obsolete status values VTY_START and VTY_CONTINUE. (vty_read) Remove calls to vty->output_func since that was part of the VTY_CONTINUE infrastructure that has been removed. (vty_flush) Remove code to support VTY_START and VTY_CONTINUE. (vty_close) Remove code to cancel vty->t_output thread, since that thread was never actually used. * bgp_route.c: Remove all code related to VTY_CONTINUE; this feature is deprecated because the output did not represent a single point in time. All output needs to be generated inline and buffered by the library code. (route_vty_out,route_vty_out_tag,damp_route_vty_out, flap_route_vty_out) Remove code to count number of lines of output, since this was only useful for VTY_CONTINUE behavior. (bgp_show_callback) Removed. (bgp_show_table) Remove hooks for VTY_CONTINUE callback support. As a result, there's a new output_arg argument to this function. Make function static. (bgp_show) Make function static and add a new output_arg argument. Change all functions that call bgp_show or bgp_show_table to pass the new output_arg argument (that used to be passed inside vty->output_arg). * bgp_mplsvpn.c: Remove declarations of functions defined in bgp_route.c; these declarations belong in bgp_route.h. * bgp_route.h: Declare 3 global functions used in both bgp_route.c and in bgp_mplsvpn.c.
2004-11-042004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vty.c: Vtysh connections to daemons should use buffering. (vty_out) Remove exception for vty_shell_serv, just use buffer_write. (vty_new) Increase output buffer size to 4096 rounded up to a multiple of pagesize. (vtysh_read) After command has been executed and all output buffered, call buffer_flush_available and schedule further writes if the buffers are not yet empty. (vtysh_write) New function to flush output to vtysh when the socket is writeable. (vty_event) Added new VTYSH_WRITE event for flushing buffers to vtysh clients. Also, should save read thread in vty->t_read so the thread can be cancelled in vty_close. * buffer.h: In struct buffer_data, remove unused "parent" field. Convert "unsigned char *data" to "unsigned char data[0]" to save a malloc. Declare new function buffer_flush_available that works with non-blocking sockets. * buffer.c: (buffer_data_new) Use a single malloc now that data is a variable-size array at end of structure. (buffer_data_free) Just a single free now that data is part of the structure. (buffer_write) Simplify the logic to make behavior more transparent. (buffer_flush) Decrease b->length as data is written out. (buffer_flush_vty_all) Decrease b->length as buffers are freed. (buffer_flush_vty) Decrease b->length as data is written out. (buffer_flush_available) New function to flush non-blocking sockets.
2004-11-012004-11-01 Paul Jakma <paul@dishone.st>paul
* sockopt.c: (setsockopt_pktinfo) remove, its unused.
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* thread.c: Use XCALLOC and sizeof the type, not the pointer.
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* smux.c: fix int to size_t compile warnings
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* memory.h: Add MTYPE_THREAD_FUNCNAME and MTYPE_THREAD_STATS * thread.c: Update stats and funcname alloc/free to use previous specific memory type defines
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* keychain.c: Convert some more strtoul users to VTY_GET_INTEGER.
2004-10-312004-10-31 Paul Jakma <paul@dishone.st>paul
* vty.c: As per Andrew's suggestions.. (vty_serv_un) remove flags. (vtysh_accept) close socket if we cant set NONBLOCK. Add flags.
2004-10-292004-10-29 Paul Jakma <paul@dishone.st>paul
* vty.c: Move setting of sock to O_NONBLOCK from vty_serv_un to vtysh_accept, where sock is the actual fd we wanted to set to O_NONBLOCK, ie the /connected/ vtysh unix socket.
2004-10-23Yet another breakage introduced in May with zserv cleanup.hasso
2004-10-222004-10-23 Paul Jakma <paul@dishone.st>paul
* zebra.h: reserve ZEBRA_ROUTE_HSLS
2004-10-22- credit rix for fixing openbsdpaul
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* sockopt.h: Fix elif that should be an else.
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* command.h: Cleanup the defines a bit, add helper defines and collapse all defines to use those. Add an attribute field to cmd_element to support, eg hidden or deprecated commands, add defun defines for such. All that's left to do is add logic to command.c to check these attributes... ;)
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* sockopt.c: (setsockopt_pktinfo) unexported * sockopt.h: Cleanup SOCKOPT_CMSG defines a bit. Add a throwaway define for SOPT_SIZE_CMSG_IFINDEX_IPV4 for systems which have neither IP_RECVIF nor IP_PKTINFO (eg openbsd).
2004-10-222004-10-13 Paul Jakma <paul@dishone.st>paul
* sockopt.c: (getsockopt_ipv4_ifindex) no ifindex should be 0, not -1.
2004-10-19Small copyright string and hostname related cleanup.hasso
2004-10-19OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,hasso
ripd might need some more testing though.
2004-10-13Make initializing smux connection configurable - "smux peer OID" commandhasso
initializes connection, and "no smux peer" command terminates it. Fixes bugzilla #47 and #112.
2004-10-13Fix critical bugzilla #113. Make CMD_ERR_NOTHING_TODO nonfatal.hasso
2004-10-132004-10-13 Paul Jakma <paul@dishone.st>paul
* (global) more const'ification. * sockunion.c: (sockunion_su2str) buffer should be sized SU_ADDRSTRLEN. (sockunion_log) do not return stack variables, strdup buf before return. * vty.h: Fix up the VTY_GET_INTEGER macros. Testing caller supplied values against ULONG_MAX is daft, when caller probably has passed a type that can not hold ULONG_MAX. use a temporary long instead. Add VTY_GET_LONG, make VTY_GET_INTEGER_RANGE use it, make VTY_GET_INTEGER a define for VTY_GET_INTEGER_RANGE.
2004-10-11Some more const string fixes.hasso
2004-10-112004-10-11 Paul Jakma <paul@dishone.st>paul
* if.h: mtu's should be unsigned. * routemap.{c,h}: const char updates * smux.{c,h}: ditto
2004-10-112004-10-11 Paul Jakma <paul@dishone.st>paul
* thread.c: (funcname_thread_add_timer) (funcname_thread_add_timer_msec) Fix mistakes from last change. Pointed out by Liu Xin in [quagga-dev 1609].
2004-10-102004-10-10 Paul Jakma <paul@dishone.st>paul
* version.h.in: (pid_output*) add const qualifier. * command.h: Change DEFUN func to take const char *[] rather than char **, to begin process of fixing compile warnings in lib/. Nearly all other changes in this commit follow from this change. * buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take const void * and cast an automatic const char *p to it. (buffer_putstr) add const * command.c: (zencrypt) const qualifier (cmd_execute_command_real) ditto (cmd_execute_command_strict) ditto (config_log_file) ditto. Fix leak of getcwd() returned string. * memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname. * distribute.{c,h}: Update with const qualifier. (distribute_free) use MTYPE_DISTRIBUTE_IFNAME (distribute_lookup) Cast to char *, note that it's ok. (distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME. (distribute_get) Cast to char *, note that it's ok. * filter.c: Update with const qualifier. * if.{c,h}: ditto. * if_rmap.{c,h}: ditto. (if_rmap_lookup) Cast to char *, note that it's ok. (if_rmap_get) ditto. * log.{c,h}: Update with const qualifier. * plist.{c,h}: ditto. * routemap.{c,h}: ditto. * smux.{c,h}: ditto. Fix some signed/unsigned comparisons. * sockopt.c: (getsockopt_cmsg_data) add return for error case. * vty.c: Update with const qualifier.
2004-10-102004-10-05 Paul Jakma <paul@dishone.st>paul
* version.h.in: (pid_output*) add const qualifier.