| Age | Commit message (Collapse) | Author |
|---|
|
* command.c (print_version): Do not bother even to examine host.name,
since it is always NULL when this function is called from main.
|
|
* command.c (print_version): Don't print host.name if it is NULL.
Fixes segfault on Solaris reported by Goetz von Escher <goetz@open.ch>
(pullup candidate)
|
|
described in [quagga-dev 2292].
|
|
* command.c: (do_echo) Added new "echo" command, useful for
watchdog pinging to make sure the daemon is responsive.
|
|
* command.c: (config_write_host) Note that "log trap" is deprecated
when writing out the config.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* command.h: Remove fields log_stdout and log_syslog from struct host,
since they are just trying to duplicate information in the
zlog_default structure. Note that this fixes a bug since those
fields were not registering any logging that was established
in the initial call to openzlog (this affects only the zebra and
ospf6d daemons). It is probably a bug to turn on any logging by
default in the call to openzlog.
* command.c: (config_write_host) Get logging info from zlog_default
instead of now-removed fields host.log_stdout and host.log_syslog.
(config_log_stdout,no_config_log_stdout) Do not set now-removed field
host.log_stdout, since this info is recorded in zlog_default.
(config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile.
(config_log_syslog,config_log_syslog_facility,no_config_log_syslog)
Do not set now-removed field host.log_syslog, since this info is
recorded in zlog_default.
|
|
* log.c: (vzlog) Take a single va_list argument and use va_copy
as necessary for multiple traversals.
(zlog) Pass only one va_list to vzlog.
(zlog_*,plog_*) Use a macro for boilerplate code; pass only one
va_list to vzlog.
(zlog_set_file) Remove unused 2nd argument (flags).
(zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions.
* log.h: Remove ZLOG_*_INDEX defines (no longer used).
Remove unused 2nd argument from zlog_set_file prototype.
Fix prototype for zlog_rotate.
* command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file.
* vty.c: (vty_out) Fix stdarg usage to perform multiple traversals
properly.
(vty_log) Must use va_copy for multiple traversals of va_list arg.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
|
|
|
|
* (global) more const'ification.
* sockunion.c: (sockunion_su2str) buffer should be sized
SU_ADDRSTRLEN.
(sockunion_log) do not return stack variables, strdup buf before
return.
* vty.h: Fix up the VTY_GET_INTEGER macros. Testing caller supplied
values against ULONG_MAX is daft, when caller probably has passed
a type that can not hold ULONG_MAX. use a temporary long instead.
Add VTY_GET_LONG, make VTY_GET_INTEGER_RANGE use it, make
VTY_GET_INTEGER a define for VTY_GET_INTEGER_RANGE.
|
|
* version.h.in: (pid_output*) add const qualifier.
* command.h: Change DEFUN func to take const char *[] rather
than char **, to begin process of fixing compile warnings in lib/.
Nearly all other changes in this commit follow from this change.
* buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take
const void * and cast an automatic const char *p to it.
(buffer_putstr) add const
* command.c: (zencrypt) const qualifier
(cmd_execute_command_real) ditto
(cmd_execute_command_strict) ditto
(config_log_file) ditto.
Fix leak of getcwd() returned string.
* memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.
* distribute.{c,h}: Update with const qualifier.
(distribute_free) use MTYPE_DISTRIBUTE_IFNAME
(distribute_lookup) Cast to char *, note that it's ok.
(distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.
(distribute_get) Cast to char *, note that it's ok.
* filter.c: Update with const qualifier.
* if.{c,h}: ditto.
* if_rmap.{c,h}: ditto.
(if_rmap_lookup) Cast to char *, note that it's ok.
(if_rmap_get) ditto.
* log.{c,h}: Update with const qualifier.
* plist.{c,h}: ditto.
* routemap.{c,h}: ditto.
* smux.{c,h}: ditto. Fix some signed/unsigned comparisons.
* sockopt.c: (getsockopt_cmsg_data) add return for error case.
* vty.c: Update with const qualifier.
|
|
|
|
|
|
added to strings and a lot of int -> unsigned int changes.
|
|
|
|
* configure.ac: capitalise the package name. autoconf lowercases
it for PACKAGE_TARNAME.
* lib/command.c: Update the copyright string in the default motd.
|
|
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
* command.c: Fix <cr> display problem for command line
description.
|
|
* lib/version.h: Add QUAGGA_PROGNAME
* lib/smux.c: hardcoded zebra/quagga -> QUAGGA_PROGNAME
* lib/command.c: ditto
* vtysh/vtysh_user.c: ditto
|
|
2003-08-12 Paul Jakma <paul@dishone.st>
* Makefile.am: redhat/zebra.* -> redhat/quagga.*
* configure.ac: Bump autoconf prerequisite to 2.53.
dist name zebra -> quagga.
general Zebra -> Quagga where appropriate (ie not zebra daemon).
User and group zebra->quagga.
s/ZEBRA\(_VERSION\)/QUAGGA\1/.
* bgpd/bgp_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/command.c: Update banners and s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/print_version.c: ditto
* lib/version.h: s/ZEBRA\(_VERSION\)/QUAGGA\1/ and bump version.
Change ZEBRA_URL.
* lib/smux.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/vty.h: Change Zebra.conf to Quagga.conf (integrated file)
* ospf6d/ospf6{,_main}.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* ospfd/ospf_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
|
|
* lib/command.c: Add config_log_syslog_facility_cmd, to set
syslog facility. This was a commit to zebra.org on May 20,
merge in to zebra-pj.
|
|
* lib/command.c: Add missing HAVE_IPV6 defines.
see bug id #23: http://bugzilla.dishone.st/show_bug.cgi?id=23
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
|
|
describing original patch and a shorter email describing changes to an
updated patch, the one which is applied:
From havanna_moon@gmx.net Sat Jan 18 00:37:13 2003
Date: Mon, 9 Dec 2002 05:32:58 +0100 (CET)
From: Yon Uriarte <havanna_moon@gmx.net>
To: "the list(tm) Zebra" <zebra@zebra.org>
Subject: [zebra 16671] [PATCH] CLI extensions.
Hi,
this patch adds 2 improvements to the CLI (lib/command.c):
#1) When in subconfig mode (router XXX, interface XXX, ...) commands that
fail for that node are tried on the main CONFIG_NODE. This is great for
configuring interfaces or changing the sub-config mode quickly, without
the need to type 'exit' between commands:
ospfd(config)# int eth1
ospfd(config-if)# ip ospf cost 9
ospfd(config-if)# ip ospf prio 101
ospfd(config-if)# router ospf
ospfd(config-router)# network 1.1.1.0/24 area 51
ospfd(config-router)# int eth2
ospfd(config-if)# ip ospf authentication message-digest
ospfd(config-if)# ^Z
ospfd#
Is this IOS-like or does IOS try to walk up the tree of config sub-modes
instead of directly trying the command on CONFIG_NODE?
CAVEATS: "?" and "TAB" don't work. IIRC IOS doesnt show that help
neither.
NON-CAVEATS: This wont break much, as config_from_file() already does
try a failed command on the parent node of the actual vty->node. If
changing the code to walk the node tree instead of directly trying
the command on the ENABLE_NODE the same semantics would be in use
and no future bugs could creep in.
#2) When in config or subconfig mode use the "do " prefix to execute
commans of the ENABLE_NODE. "?" and "TAB" work. The space after the
"do" is needed:
ospfd(config-router)# do<?>
% There is no matched command.
ospfd(config-router)# do <?>
clear Reset functions
configure Configuration from vty interface
copy Copy configuration
debug Debugging functions (see also 'undebug')
disable Turn off privileged mode command
end End current mode and change to enable mode.
exit Exit current mode and down to previous mode
help Description of the interactive help system
list Print command list
no Negate a command or set its defaults
quit Exit current mode and down to previous mode
show Show running system information
terminal Set terminal line parameters
who Display who is on vty
write Write running configuration to memory, network, or terminal
ospfd(config-router)# do sho<TAB>
ospfd(config-router)# do show me<TAB>
ospfd(config-router)# do show memory r<TAB>
ospfd(config-router)# do show memory rip
RIP structure : 0
RIP route info : 0
RIP interface : 0
RIP peer : 0
RIP offset list : 0
RIP distance : 0
ospfd(config-router)# ^Z
ospfd#
CAVEATS: I don't have access to an IOS with this feature, so I implemented
it from the comments on this mailing list (in fact my personal motivation
was to implement feature #1, which I missed on zebra. But #2 sounded like
a nice one to have, and xemacs was already parked on command.c ...).
Is this IOS-like or are there differences?
I will happily change this patch to mimick IOS or the mailing-list
consensus on CLI-usability.
regards,
yon
From havanna_moon@gmx.net Sat Jan 18 01:13:11 2003
Date: Sat, 11 Jan 2003 23:36:51 +0100 (CET)
From: Yon Uriarte <havanna_moon@gmx.net>
To: zebra@zebra.org
Subject: [zebra 17218] Re: [PATCH] CLI extensions.
Hi,
[redacted]
> I prefer the IOS way for the node "up walking".
This patch should walk the tree upwards:
bgpd(config)# router bgp 1
bgpd(config-router)# address-family ipv4 multicast
bgpd(config-router-af)# access-list 1 remark hola que tal
bgpd(config)#
I cant test all combinations, so I cant rule out some bugs. I'd love to
get (long and explicit) bug reports.
[redacted]
|
|
be off:
From havanna_moon@gmx.net Sat Jan 18 00:37:13 2003
Date: Mon, 9 Dec 2002 05:32:58 +0100 (CET)
From: Yon Uriarte <havanna_moon@gmx.net>
To: "the list(tm) Zebra" <zebra@zebra.org>
Subject: [zebra 16671] [PATCH] CLI extensions.
Hi,
this patch adds 2 improvements to the CLI (lib/command.c):
#1) When in subconfig mode (router XXX, interface XXX, ...) commands that
fail for that node are tried on the main CONFIG_NODE. This is great for
configuring interfaces or changing the sub-config mode quickly, without
the need to type 'exit' between commands:
ospfd(config)# int eth1
ospfd(config-if)# ip ospf cost 9
ospfd(config-if)# ip ospf prio 101
ospfd(config-if)# router ospf
ospfd(config-router)# network 1.1.1.0/24 area 51
ospfd(config-router)# int eth2
ospfd(config-if)# ip ospf authentication message-digest
ospfd(config-if)# ^Z
ospfd#
Is this IOS-like or does IOS try to walk up the tree of config sub-modes
instead of directly trying the command on CONFIG_NODE?
CAVEATS: "?" and "TAB" don't work. IIRC IOS doesnt show that help
neither.
NON-CAVEATS: This wont break much, as config_from_file() already does
try a failed command on the parent node of the actual vty->node. If
changing the code to walk the node tree instead of directly trying
the command on the ENABLE_NODE the same semantics would be in use
and no future bugs could creep in.
#2) When in config or subconfig mode use the "do " prefix to execute
commans of the ENABLE_NODE. "?" and "TAB" work. The space after the
"do" is needed:
ospfd(config-router)# do<?>
% There is no matched command.
ospfd(config-router)# do <?>
clear Reset functions
configure Configuration from vty interface
copy Copy configuration
debug Debugging functions (see also 'undebug')
disable Turn off privileged mode command
end End current mode and change to enable mode.
exit Exit current mode and down to previous mode
help Description of the interactive help system
list Print command list
no Negate a command or set its defaults
quit Exit current mode and down to previous mode
show Show running system information
terminal Set terminal line parameters
who Display who is on vty
write Write running configuration to memory, network, or terminal
ospfd(config-router)# do sho<TAB>
ospfd(config-router)# do show me<TAB>
ospfd(config-router)# do show memory r<TAB>
ospfd(config-router)# do show memory rip
RIP structure : 0
RIP route info : 0
RIP interface : 0
RIP peer : 0
RIP offset list : 0
RIP distance : 0
ospfd(config-router)# ^Z
ospfd#
CAVEATS: I don't have access to an IOS with this feature, so I implemented
it from the comments on this mailing list (in fact my personal motivation
was to implement feature #1, which I missed on zebra. But #2 sounded like
a nice one to have, and xemacs was already parked on command.c ...).
Is this IOS-like or are there differences?
I will happily change this patch to mimick IOS or the mailing-list
consensus on CLI-usability.
regards,
yon
|
|
[zebra 16671] [PATCH] CLI extensions.
|
|
|
