| Age | Commit message (Collapse) | Author |
|---|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Document the meaning of the
ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags.
* connected.c: (connected_withdraw) Do not delete the connected
address if the ZEBRA_IFC_CONFIGURED flag is set.
(connected_add_ipv4,connected_add_ipv6) Before calling
connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag
on the superseded connected structure.
|
|
2006-03-06 Paul Jakma <paul.jakma@sun.com>
* if.h: export show_address_cmd, for anyone who wishes to use
it.
|
|
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* if.h: (struct interface) expand flags to 8 bytes.
* zclient.c: (zebra_interface_{add,state}_read) stream read of
interface flags now need to use stream_getq.
(zebra_interface_if_set_value) ditto
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* zserv.c: (zsend_interface_{add,delete,update}) if flags are
8 bytes now, update to write out with stream_putq.
|
|
* (general) extern and static'ification of functions in code and
header.
Cleanup any definitions with unspecified arguments.
Add casts for callback assignments where the callback is defined,
typically, as passing void *, but the function being assigned has
some other pointer type defined as its argument, as gcc complains
about casts from void * to X* via function arguments.
Fix some old K&R style function argument definitions.
Add noreturn gcc attribute to some functions, as appropriate.
Add unused gcc attribute to some functions (eg ones meant to help
while debugging)
Add guard defines to headers which were missing them.
* command.c: (install_node) add const qualifier, still doesnt shut
up the warning though, because of the double pointer.
(cmp_node) ditto
* keychain.c: (key_str2time) Add GET_LONG_RANGE() macro, derived
fromn vty.h ones to fix some of the (long) < 0 warnings.
* thread.c: (various) use thread_empty
(cpu_record_hash_key) should cast to uintptr_t, a stdint.h type
* vty.h: Add VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX so they
removed from ospfd/ospf_vty.h
* zebra.h: Move definition of ZEBRA_PORT to here, to remove
dependence of lib on zebra/zserv.h
|
|
* if_ioctl.c: (interface_list_ioctl) Use if_get_by_name_len.
* if_proc.c: (ifaddr_proc_ipv6) Increase size of ifname buffer to
avoid overflow.
* kernel_socket.c: (ifan_read) Use if_get_by_name_len.
* if.h: Fix comments to reflect that if_lookup_by_name and
if_get_by_name now require the argument strings to be NUL-terminated.
* if.c: (if_lookup_by_name) Compare using strcmp.
(if_get_by_name) Pass strlen(ifname) as 2nd arg to if_create.
|
|
* if.h: (if_lookup_by_name_len, if_get_by_name_len) New functions.
* if.c: (if_lookup_by_name_len, if_get_by_name_len) New functions.
(if_get_by_name) Tighten up code.
(interface) Use new function if_get_by_name_len.
* zclient.c: (zebra_interface_add_read) Use new if_get_by_name_len
function.
(zebra_interface_state_read) Use new if_lookup_by_name_len function.
* kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function
to save a memcpy.
* if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new
if_get_by_name_len function.
* ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
* if.h: Declare if_flag_dump.
[backport candidate]
|
|
* if.h: Add more 'non-generic' IFF_ flags.
* if.c: IFF_NOXMIT/IFF_VIRTUAL interfaces are 'loopback like'
|
|
ripd might need some more testing though.
|
|
* if.h: mtu's should be unsigned.
* routemap.{c,h}: const char updates
* smux.{c,h}: ditto
|
|
* version.h.in: (pid_output*) add const qualifier.
* command.h: Change DEFUN func to take const char *[] rather
than char **, to begin process of fixing compile warnings in lib/.
Nearly all other changes in this commit follow from this change.
* buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take
const void * and cast an automatic const char *p to it.
(buffer_putstr) add const
* command.c: (zencrypt) const qualifier
(cmd_execute_command_real) ditto
(cmd_execute_command_strict) ditto
(config_log_file) ditto.
Fix leak of getcwd() returned string.
* memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.
* distribute.{c,h}: Update with const qualifier.
(distribute_free) use MTYPE_DISTRIBUTE_IFNAME
(distribute_lookup) Cast to char *, note that it's ok.
(distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.
(distribute_get) Cast to char *, note that it's ok.
* filter.c: Update with const qualifier.
* if.{c,h}: ditto.
* if_rmap.{c,h}: ditto.
(if_rmap_lookup) Cast to char *, note that it's ok.
(if_rmap_get) ditto.
* log.{c,h}: Update with const qualifier.
* plist.{c,h}: ditto.
* routemap.{c,h}: ditto.
* smux.{c,h}: ditto. Fix some signed/unsigned comparisons.
* sockopt.c: (getsockopt_cmsg_data) add return for error case.
* vty.c: Update with const qualifier.
|
|
|
|
* if.h: Add mtu6 field to struct interface, IPv6 MTU may differ
from IPv4, and Solaris treats the MTU's differently.
Add connected_add_by_prefix, for use by later patch.
* if.c: (connected_add_by_prefix) Add prefix to connected list.
(if_flag_dump) Solaris: Dump IFF_IPv4/6 flag
(if_dump) Dump mtu6 flag, for HAVE_IPV6.
|
|
* lib/if.{ch}: remove ifc_pointtopoint() - left over from the
reverted RFC3021 patch.
|
|
* lib/if.c: (if_cmp_func) new function, compare interface names in
alphabetical order.
(if_create) Take name as argument and add interface in sorted order.
(if_get_by_name),(interface_cmd) fixup calls to if_create - see
above.
(if_init) register list comparison function.
* lib/if.h: Add comparison function, modify if_create prototype.
* lib/zclient.c: Modify call to if_create.
* ospfd/ospf_interface.c: (ospf_vl_new) modify call to if_create.
change sprintf to snprintf.
* zebra/kernel_socket.c: (ifm_read) modify call to if_create.
|
|
* Revert Cougar's sort interface names patch, causes problems with
enabling of interfaces for OSPF in ospfd.
|
|
|
|
Add the 'no interface' command to all the daemons and vtysh. now it's
possible to delete interface from routeing daemons as well only if it
doesn't exist in os.
http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
|
|
|
subnet handling
|
|
|
