| Age | Commit message (Collapse) | Author |
|---|
|
smux_trap() contains an argument whose use appears to be to set
sysUpTime.0/timestamp field in SNMP trap. However, this value is not
used in smux_trap(). Moreover, it is expected that this field is the
value of sysUpTime.0 when the trap was sent and not any other time
related to the trap. To avoid any confusion, we remove this field from
the signature of the function.
|
|
--enable-snmp will enable AgentX support in Quagga. SMUX is still here
and can be enabled with --enable-snmp=smux. AgentX support can be
enabled with "agentx" in configuration file. As for SMUX, this command
is not understood by vtysh. It can be disabled with "no agentx",
though there is no real use of this since this command cannot be used
with vtysh.
If "agentx" and "no agentx" command were added to vtysh, it would not
be possible to disable agentx support after enabling it because
NetSNMP does not expose the appropriate methods for this.
The internals of AgentX are hidden by NetSNMP. Therefore, we don't
have a file descriptor to add to the threading system. We do not have
the timers to set either. Therefore, the event loop is modified to
make use of snmp_select_info() from NetSNMP.
Traps are not supported yet.
|
|
lib/snmp.c gets OID related helper functions that can be used with
another SNMP interface. smux.h is cleaned of SMUX specific bits to
only expose functions that may be used by an alternative
implementation. We also do not redefine functions already present in
NetSNMP. Just use the appropriate headers.
|
|
NetSNMP is the only SNMP implementation for Quagga. We don't need two
different symbols.
|
|
Make progname a string, and cast when calling asn1.
Remove variable set but never used.
|
|
smux_trap and oid_copy should allow read-only source.
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
|
Compiled on 32-bit and 64-bit linux gcc 4.1.2 platforms.
No run-time testing on 32-bit and limited run-time testing on 64-bit.
|
|
--without-crypto
Autoconfig work by me, the rest was done by
"Kirill K. Smirnov" <lich@math.spbu.ru>
|
|
2007-10-22 Lorenzo Colitti <lorenzo@colitti.com>
* smux.c: (smux_stop) Avoid cancelling a defunct thread pointer
(smux_start) Stop smux before trying to start it, possibly again.
|
|
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
|
|
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* lib/smux.c: (smux_trap) Fix printf format to work with 64-bit size_t.
* ospf6d/ospf6_snmp.c: (ospfv3AreaEntry, ospfv3AreaLsdbEntry) Fix some
zlog_debug printf formats to work with 64-bit size_t.
|
|
2006-09-26 Pierre-Yves Ritschard <pierre-yves@spootnik.org>
* smux.c: (smux_open,smux_trap,smux_register) Fix various
asn_build_* calls to pass the proper length in the final
argument: use sizeof(<variable>) instead of sizeof(<type>),
since there were several inconsistencies between the actual
variable type and the size that was passed. This should
fix some problems on 64-bit architectures where sizeof(int)
!= sizeof(long).
|
|
* lib/smux.[ch]: allow to retreive global OID (identified by <0
namelen).
* ospf_ism.c: generate SNMP traps on Interface state change
* ospf_nsm.c: generate SNMP traps on Neighbour state change
* ospf_snmp.[ch]: support for SNMP traps for interface and neighbours.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* {smux.c,zclient.c}: Change level of debug messages to LOG_DEBUG.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* smux.c: fix int to size_t compile warnings
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
* if.h: mtu's should be unsigned.
* routemap.{c,h}: const char updates
* smux.{c,h}: ditto
|
|
* version.h.in: (pid_output*) add const qualifier.
* command.h: Change DEFUN func to take const char *[] rather
than char **, to begin process of fixing compile warnings in lib/.
Nearly all other changes in this commit follow from this change.
* buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take
const void * and cast an automatic const char *p to it.
(buffer_putstr) add const
* command.c: (zencrypt) const qualifier
(cmd_execute_command_real) ditto
(cmd_execute_command_strict) ditto
(config_log_file) ditto.
Fix leak of getcwd() returned string.
* memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.
* distribute.{c,h}: Update with const qualifier.
(distribute_free) use MTYPE_DISTRIBUTE_IFNAME
(distribute_lookup) Cast to char *, note that it's ok.
(distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.
(distribute_get) Cast to char *, note that it's ok.
* filter.c: Update with const qualifier.
* if.{c,h}: ditto.
* if_rmap.{c,h}: ditto.
(if_rmap_lookup) Cast to char *, note that it's ok.
(if_rmap_get) ditto.
* log.{c,h}: Update with const qualifier.
* plist.{c,h}: ditto.
* routemap.{c,h}: ditto.
* smux.{c,h}: ditto. Fix some signed/unsigned comparisons.
* sockopt.c: (getsockopt_cmsg_data) add return for error case.
* vty.c: Update with const qualifier.
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
* lib/version.h: Add QUAGGA_PROGNAME
* lib/smux.c: hardcoded zebra/quagga -> QUAGGA_PROGNAME
* lib/command.c: ditto
* vtysh/vtysh_user.c: ditto
|
|
* lib/smux.c: change progname to quagga.
|
|
2003-08-12 Paul Jakma <paul@dishone.st>
* Makefile.am: redhat/zebra.* -> redhat/quagga.*
* configure.ac: Bump autoconf prerequisite to 2.53.
dist name zebra -> quagga.
general Zebra -> Quagga where appropriate (ie not zebra daemon).
User and group zebra->quagga.
s/ZEBRA\(_VERSION\)/QUAGGA\1/.
* bgpd/bgp_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/command.c: Update banners and s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/print_version.c: ditto
* lib/version.h: s/ZEBRA\(_VERSION\)/QUAGGA\1/ and bump version.
Change ZEBRA_URL.
* lib/smux.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/vty.h: Change Zebra.conf to Quagga.conf (integrated file)
* ospf6d/ospf6{,_main}.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* ospfd/ospf_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
|
|
* Fix lib/smux.c's reliance on daemons exporting struct
thread_master *master.
|
|
* Sync to Zebra CVS
* Fix lib/thread.h leak
* Fix small Opaque LSA leak
* Do not configure OSPF interfaces for secondary addresses
* vtysh fixes from Hasso
* Dave Watson's missing ntohs fix
|
|
|
|
|
