| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
to stdarg handling.
|
|
* log.c: (vzlog) Take a single va_list argument and use va_copy
as necessary for multiple traversals.
(zlog) Pass only one va_list to vzlog.
(zlog_*,plog_*) Use a macro for boilerplate code; pass only one
va_list to vzlog.
(zlog_set_file) Remove unused 2nd argument (flags).
(zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions.
* log.h: Remove ZLOG_*_INDEX defines (no longer used).
Remove unused 2nd argument from zlog_set_file prototype.
Fix prototype for zlog_rotate.
* command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file.
* vty.c: (vty_out) Fix stdarg usage to perform multiple traversals
properly.
(vty_log) Must use va_copy for multiple traversals of va_list arg.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
|
|
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE
capabilities (that were used only in bgpd/bgp_route.c and are now
removed). Also remove some other fields that were not being
used at all.
* vty.c: (vty_execute) Do not test for obsolete status values VTY_START
and VTY_CONTINUE.
(vty_read) Remove calls to vty->output_func since that was part
of the VTY_CONTINUE infrastructure that has been removed.
(vty_flush) Remove code to support VTY_START and VTY_CONTINUE.
(vty_close) Remove code to cancel vty->t_output thread, since that
thread was never actually used.
* bgp_route.c: Remove all code related to VTY_CONTINUE; this feature
is deprecated because the output did not represent a single point
in time. All output needs to be generated inline and buffered
by the library code.
(route_vty_out,route_vty_out_tag,damp_route_vty_out,
flap_route_vty_out) Remove code to count number of lines of output,
since this was only useful for VTY_CONTINUE behavior.
(bgp_show_callback) Removed.
(bgp_show_table) Remove hooks for VTY_CONTINUE callback support.
As a result, there's a new output_arg argument to this function.
Make function static.
(bgp_show) Make function static and add a new output_arg argument.
Change all functions that call bgp_show or bgp_show_table to
pass the new output_arg argument (that used to be passed inside
vty->output_arg).
* bgp_mplsvpn.c: Remove declarations of functions defined in
bgp_route.c; these declarations belong in bgp_route.h.
* bgp_route.h: Declare 3 global functions used in both bgp_route.c
and in bgp_mplsvpn.c.
|
|
* vty.c: Vtysh connections to daemons should use buffering.
(vty_out) Remove exception for vty_shell_serv, just use buffer_write.
(vty_new) Increase output buffer size to 4096 rounded up to a
multiple of pagesize.
(vtysh_read) After command has been executed and all output buffered,
call buffer_flush_available and schedule further writes if the
buffers are not yet empty.
(vtysh_write) New function to flush output to vtysh when the socket
is writeable.
(vty_event) Added new VTYSH_WRITE event for flushing buffers to vtysh
clients. Also, should save read thread in vty->t_read so the
thread can be cancelled in vty_close.
* buffer.h: In struct buffer_data, remove unused "parent" field.
Convert "unsigned char *data" to "unsigned char data[0]" to save
a malloc. Declare new function buffer_flush_available that works
with non-blocking sockets.
* buffer.c: (buffer_data_new) Use a single malloc now that data is
a variable-size array at end of structure.
(buffer_data_free) Just a single free now that data is part of the
structure.
(buffer_write) Simplify the logic to make behavior more transparent.
(buffer_flush) Decrease b->length as data is written out.
(buffer_flush_vty_all) Decrease b->length as buffers are freed.
(buffer_flush_vty) Decrease b->length as data is written out.
(buffer_flush_available) New function to flush non-blocking sockets.
|
|
* vty.c: As per Andrew's suggestions..
(vty_serv_un) remove flags.
(vtysh_accept) close socket if we cant set NONBLOCK. Add flags.
|
|
* vty.c: Move setting of sock to O_NONBLOCK from vty_serv_un
to vtysh_accept, where sock is the actual fd we wanted to set to
O_NONBLOCK, ie the /connected/ vtysh unix socket.
|
|
* version.h.in: (pid_output*) add const qualifier.
* command.h: Change DEFUN func to take const char *[] rather
than char **, to begin process of fixing compile warnings in lib/.
Nearly all other changes in this commit follow from this change.
* buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take
const void * and cast an automatic const char *p to it.
(buffer_putstr) add const
* command.c: (zencrypt) const qualifier
(cmd_execute_command_real) ditto
(cmd_execute_command_strict) ditto
(config_log_file) ditto.
Fix leak of getcwd() returned string.
* memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.
* distribute.{c,h}: Update with const qualifier.
(distribute_free) use MTYPE_DISTRIBUTE_IFNAME
(distribute_lookup) Cast to char *, note that it's ok.
(distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.
(distribute_get) Cast to char *, note that it's ok.
* filter.c: Update with const qualifier.
* if.{c,h}: ditto.
* if_rmap.{c,h}: ditto.
(if_rmap_lookup) Cast to char *, note that it's ok.
(if_rmap_get) ditto.
* log.{c,h}: Update with const qualifier.
* plist.{c,h}: ditto.
* routemap.{c,h}: ditto.
* smux.{c,h}: ditto. Fix some signed/unsigned comparisons.
* sockopt.c: (getsockopt_cmsg_data) add return for error case.
* vty.c: Update with const qualifier.
|
|
|
|
added to strings and a lot of int -> unsigned int changes.
|
|
|
|
|
|
* vty.c: (vty_serv_un) set unix vty socket to nonblocking
to prevent inadvertent blocking of daemons by use of
vtysh. TODO: disentangle manual paging from the buffer_write
path so that unix vty can use this path too and be reliable.
|
|
to read system one.
|
|
* filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast
to u_char. (ipv6_access_list_remark_cmd) ditto.
if.c: ditto
* network.c: (readn/writen) pointer arg should be type u_char.
* plist.c: needs to include stream.h, not declare stream functions
internally.
(various) Add static qualifier to internal functions.
(prefix_list_type_str) extraneous breaks in switch statement.
(ip_prefix_list_description_cmd) buffer_putstr doesnt need cast
* stream.h: depends on plist.h and export stream_put_prefix
* vty.c: (vty_<telnet option build functions>) should use
unsigned char, telnet options are 0 -> 255.
* zclient.c: various u_char<->char type cleanups.
* zebra.h: Having to define CMSG_* can apply to more than just
BSDI_NRL.
* ripd.c: (rip_distribute_update_all) distribute list hook
function pointer prototype requires struct prefix_list * arg.
(rip_distribute_update_all_wrapper) update to pass required arg,
NULL.
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
|
|
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
* lib/vty.c: (vty_read) additional change i had applied to Jay's
telnet sub-option processing crash fix was incorrect, revert.
|
|
* lib/vty.c: cleanup getcwd again. just pass the buffer in to getcwd.
|
|
* lib/vty.c: (vty_telnet_option) Remote DoS exists if a telnet
end-sub-negotation is sent when no sub-negotation data has been
sent. Return immediately if no sub-negotation is in progress.
(vty_read) do not attempt to process options if no sub-negotation
is in progress.
|
|
* lib/vty.c: (vty_save_cwd) dont crash if getcwd fails. try fallback
to SYSCONFDIR. Allocate cwd from the stack rather than relying on
(non-portable) getcwd() allocation (which we didnt seem to be
freeing).
|
|
* lib/version.h: add ZEBRA_URL (unused for now)
* lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not
be fatal. slight reformating.
* ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends
these type of routes. probably should be a new type of route to
allow daemons to more easily choose whether to redistribute them
- rathen than just a flag (eg for reject/blackhole).
reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to
avoid the inverted test - slightly more readable.
* redhat/zebra.spec.in: Add ospfapi port to services file, if
with_ospfapi.
* zebra/rib.h: Change nexthop types to an enum.
* zebra/rt_netlink.c: run it through indent -nut.
Add nexthop_types_desc[] descriptive array for nexthop types.
(netlink_route_multipath) debug statements indicate which branch
they are in and print out nexthop type.
* zebra/zebra_rib.c: slight reformatting.
* zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to
static_add_ipv4() if Null0 route is configured. print out Null0 if
STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be
possible to set flags from vty) for config and show route.
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
* Merge of zebra privileges
|
|
|
|
Subject: [zebra 19019] [PATCH] daemons -A option
Works now. Patch attached. Not tested for IPv6, but should work there too.
|
|
|
