summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2013-04-09build: fix minimal mixup in gitinfo suffixDavid Lamparter
the original version of this had issues with tagless repositories; to fix that I removed the "-g" part from one of the regexes. I then failed to add those 2 characters back, leading to version numbers like "0.99.220123456" instead of "0.99.22-ga123456". Let's put the "-g" back... Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-02-24hash: dynamically grow hash tableStephen Hemminger
Dynamically grow the hash table index if the chains get too long. If expansion doesn't help keep chain length short, then stop expanding, to avoid bad behavior if there is a poor hash function. Not a new idea, based on concepts in uthash. Depends on my previous patch to restrict hash to power of 2. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> [profiling results: sum of cycles spent in hash_get/jhash with RIPE RIS test data (single simple BGP peer) improved to 69% of previously spent] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-02-24hash: force size to be a power of 2Stephen Hemminger
By forcing the hash table size to be a power of 2, a potentially expensive divide can be replaced by a mask operation. Almost all usage of the hash table was using default size of 1024. Only places with different size was thread library (1011) and bgp aspath. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-16zebra: fix sockaddr_dl length assumptions (BZ#737)David Lamparter
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly on other systems as well). Particularly, sizeof(struct sockaddr_dl) returns a size that does not include the full sdl_data field, leading to not enough data being copied. This breaks IPv6 RAs in particular, as a broken mac address from sockaddr_dl will be included in the packets. From: Matthias-Christian Ott <ott@mirix.org> Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de> [further simplified + more comments] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-15build: Fix build on MacOSX 10.8 (Mountain Lion)Hasso Tepper
Newer MacOSX versions have support for both IPv6 advanced socket API RFCs (2292 and 3542) switchable in compile time, but neither of these is default for some strange reason. RFC3542 will be default in future, but for now we have to declare that we want to use the RFC3542 API before including <netinet/in.h>. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-15bgpd: improve logging of invalid BGP NotificationsLeonid Rosenboim
Invalid BGP Notification messages should be logged locally, cf. RFC4271, Sect. 6.4, p 34, NOTIFICATION Message Error Handling Current notification for invalid Notification code: 2012/10/10 02:17:54 BGP: message index 10 not found in bgp_notify_msg (max is 8) 2012/10/10 02:17:54 BGP: 192.168.1.1 received NOTIFICATION 10/0 ((no item found)) 0 bytes the logging should be a bit more clear. The above logging really doesn't explain much and looks more like a programming error. [rewrote most of it to get in something I can call a shape -David] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-11lib: remove ALL_LIST_ELEMENTS dead code branchDavid Lamparter
ALL_LIST_ELEMENTS is checking node == NULL twice, which is causing a whole slew of false positives in Coverity. In this particular case, addressing this in the code is reasonable; being a macro, this appears all over the place without easy remedy. Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-11build: Fix build for systems with no /bin/trueHasso Tepper
There are systems with no /bin/true - it might have different path (/usr/bin/true) or even a shell builtin. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-11Merge remote-tracking branch 'savannah/sf/ospfd'David Lamparter
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-07lib: Changes to VTY string-parsing macros to remove warningsAndrew Certain
The VTY_GET_INTEGER_RANGE macro was being used also just to check the range on a variable that wasn't used (for the "no" version of a VTY command), so I split the macro into two. Also, since the variable is unsigned, if MIN is zero, you get a warning about comparing an unsigned number against 0, giving rise to slightly convoluted logic. Note that the previous two patches were found by the -Wtype-limits and -Wunused-variables warnings. Without the changes to these macros, these warnings are triggered erroneously, making it harder to find the real problems. Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
2012-12-13build: fix dist tarballDavid Lamparter
automake file lists haven't quite kept up with recent changes, time to fix them up so the dist tarball actually works... Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-12-12build: include git infoDavid Lamparter
If enabled with --with-pkg-gitversion on ./configure, this will append git version strings and branch information at the following places: - overall version number: 0.99.21-g0123456 - login motd and show version: tag information + git id + branches Sample output: Hello, this is Quagga (version 0.99.21-g14b49ad-dirty). Copyright 1996-2005 Kunihiro Ishiguro, et al. This is a git build of quagga_0_99_21_release-106-g14b49ad-dirty Associated branch(es): local:master [v2]: fix build without gitinfo (add "else" branch) [v2]: fix for repos without any tags (different git describe output) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30lib: bring in sys/queue.h from FreeBSD treeAvneesh Sachdev
Bring in sys/queue.h from the FreeBSD tree as lib/queue.h. This header implements lists of various flavors using inline linkages. The imported file corresponds to SVN revision 221843 (url below) and is available under the terms of the New BSD license (3-clause). http://svnweb.freebsd.org/base/head/sys/sys/queue.h?revision=221843 Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add iterator for walking all tables in RIBAvneesh Sachdev
* lib/zebra.h Add macro ZEBRA_NUM_OF, which returns the number of elements in a static array. * zebra/rib.h Add the rib_tables_iter_t structure and associated functions, which allow one to walk all tables in the rib. * zebra/zebra_rib.c - Add vrf_id_get_next() to retrieve the first VRF id (if any) that is greater than a given VRF id. - Add rib_tables_iter_next(). Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add way to determine VRF/AFI/SAFI of tableAvneesh Sachdev
Add some code that allows us to determine which VRF and AFI/SAFI a given RIB table corresponds to. * zebra/rib.h Add rib_table_info_t structure, which contains information about the VRF, AFI and SAFI that a table is for. * zebra/zebra_rib.c - Add the vrf_table_create() function, which creates a table and sets its 'info' pointer to a newly created rib_table_info_t. The 'info' pointer allows us to go from a route_node or a table to the associated vrf. - vrf_alloc(): Use vrf_create_table() to create tables. * lib/memtypes.c Add memory type for rib_table_info_t. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add structure to hold per-prefix state in RIBAvneesh Sachdev
Add the rib_dest_t structure to hold per-prefix state in the routing information base. This gives us an appropriate place to maintain the queueing state of a route_node. Queuing state was previously being stored on the first rib in the list of ribs hanging off the route_node. * zebra/rib.h - Add new structure rib_dest_t. - Remove the rn_status field from 'struct rib', it is no longer required. - Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for walking all 'struct ribs' corresponding to a route_node. These hide the fact that there is an intermediate rib_dest_t structure. - Add a few utility inlines to go between a rib_dest_t and associated structures. * zebra/zebra_rib.c - rib_link()/rib_unlink() Tweak for new behavior, where the 'info' pointer of a route_node points to a rib_dest_t. The list of ribs for a prefix now hangs off of the dest. Change the way we ref count route_nodes. We now hold a single ref count on a route_node if there is a corresponding rib_dest_t. - Maintain the queuing state of a route_node on the flags field of the rib_dest_t. - Add the rib_gc_dest() function, which deletes a rib_dest_t if it is no longer required. A rib_dest_t can be deleted iff there are no struct ribs hanging off of it. - Call rib_gc_dest() any time we unlink a rib from the rib_dest_t. Currently we only need to call it once, just before we return from rib_process(). * zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c Use new macros to walk over route_node ribs. * lib/memtypes.c Add memory type for rib_dest_t. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-05lib: Implement monotonically increasing clock for Darwin.Hasso Tepper
There is no Posix CLOCK_MONOTONIC in Darwin, but monotonically increasing clock can be implemented using mach_absolute_time(). Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-01lib: treat OSX as BSD for IP_HDRINCL (BZ#739)Doug VanLeuven
Mac OS X needs HAVE_IP_HDRINCL_BSD_ORDER defined like BSD. If it's not defined, it'll fail like this: *** sendmsg in ospf_write failed to 224.0.0.5, id 0, off 0, len 64, interface en0, mtu 1500: Invalid argument Which is caused by reordering iph->ip_len in sockopt_iphdrincl_swab_htosys. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-10-25*: use array_size() helper macroBalaji.G
Use the array_size() helper macro. Replaces several instances of local macros with the same definition. Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-10-25lib: add array_size() helperDavid Lamparter
implement array_size as sizeof(array) / sizeof(array element) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-10-25lib: improve sanity checks in stream_set_endp()Avneesh Sachdev
* lib/stream.c: (stream_set_endp) Add checks to make sure that the supplied 'endp' is within the 'size' of the stream, and that the current read pointer 'getp' is not beyond the specified 'endp'.
2012-10-25lib: improve fletcher checksum validationJR Rivers
OVERVIEW The checksum used in OSPF (rfc2328) is specified in rc905 annex B. There is an sample implementation in rfc1008 which forms the basis of the quagga implementation. This algorithm works perfectly when generating a checksum; however, validation is a bit problematic. The following LSA (generated by a non-quagga implementation) is received by quagga and marked with an invalid checksum; however, it passes both the rfc905 and rfc1008 validation checks. static uint8_t lsa_10_121_233_29[] = { 0x0e, 0x10, 0x02, 0x03, 0x09, 0x00, 0x35, 0x40, 0x0a, 0x79, 0xe9, 0x1d, 0x80, 0x00, 0x00, 0x03, 0x00, 0x8a, 0x00, 0x1c, 0xff, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x36, 0xb0 }; LS Type: Summary-LSA (IP network) LS Age: 3600 seconds Do Not Age: False Options: 0x02 (E) Link-State Advertisement Type: Summary-LSA (IP network) (3) Link State ID: 9.0.53.64 Advertising Router: 10.121.233.29 (10.121.233.29) LS Sequence Number: 0x80000003 LS Checksum: 0x008a Length: 28 Netmask: 255.255.255.224 Metric: 14000 You'll note that one byte of the checksum is 0x00; quagga would calculate the checksum as 0xff8a. It can be argued that the sourcing implementation generates an incorrect checksum; however, rfc905 indicates that, for 1's complement arithmetic, the value 255 shall be regarded as 0, thus either values are valid. EXPLANATION The quagga ospfd and ospf6d implementations operate by copying the PDU's existing checksum in a holding variable, calculating the checksum, and comparing the resulting checksum to the original. As a note, this implementation has the side effect of modifying the contents of the PDU. Evaluation of both rfc905 and rfc1008 shows that checksum validation should involve calculating the sum over the PDU and checking that both resulting C0 and C1 values are zero. This behavior is enacted in the rfc1008 implementation by calling encodecc with k = 0 (checksum offset); however, this functionality had been omitted from the quagga implementation. PATCH This patch adds the ability to call the quagga's fletcher_checksum() with a checksum offset value of 0xffff (aka FLETCHER_CHECKSUM_VALIDATE) which returns the sum over the buffer (a value of 0 indicates a valid checksum). This is similar to the mechanism in rfc1008 when called with k = 0. The patch also introduces ospf_lsa_checksum_valid(). ospf6d had it's own implementation of the fletcher checksum in ospf6_lsa_checksum(); it's the same algorithm as in fletcher_checksum(). This patch removes the local implementation in favor of the library's as well as creates and uses ospf6_lsa_checksum_valid(). quagga's ISIS implementation suffers from the same problem; however, I do not have the facilities to validate a fix to ISIS, thus this change has been left to the ISIS maintainers. The function iso_csum_verify() should be reduced to running the fletcher checksum over the buffer using an offset of 0. Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Reviewed-by: Nolan Leake <nolan@cumulusnetworks.com> Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com> Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-09-26lib/table: add route_table_get_next() and iteratorAvneesh Sachdev
* lib/table.[ch] - Add a function (route_table_get_next()) to get the route_node in a tree that succeeds a given prefix in iteration order. This allows one to reliably walk nodes in a tree while allowing modifications, and is useful for achieving scale and performance. Other approaches are also possible -- the main plus point of this one is that it does not require any state about the walk to be maintained in the table data structures. - Add an iterator for walking the nodes in a tree. This introduces a new structure (route_table_iter_t) and the following main functions. route_table_iter_init() route_table_iter_pause() route_table_iter_next() route_table_iter_cleanup() The iterator normally uses node pointers and the existing route_next() function to walk nodes efficiently. When an iteration is 'paused' with route_table_iter_pause(), it stores the last prefix processed. The next call to route_table_iter_next() transparently invokes route_table_get_next() with the prefix to resume iteration. * bgpd/bgp_table.[ch] Add wrappers for the new table features described above. * tests/table_test.c Add tests for the new table code. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-09-26lib: prepare table code for reuse by bgp_tableAvneesh Sachdev
* lib/table.[ch] - Add a macro (ROUTE_NODE_FIELDS) that expands to all the fields of a route_node structure. - Add the route_table_delegate_t structure, a function vector which allows clients to customize the behavior of one or more tables. The delegate currently contains the 'create_node' and 'destroy_node' functions, and hence enables a table to use an alternative node structure. The alternative node is expected to embed the fields of a route_node using ROUTE_NODE_FIELDS. - Add route_table_init_with_delegate() to create a new table with a given delegate. - Make route_table_init() a thin wrapper around route_table_init_with_delegate(). The delegate it passes in simply creates/destroys route_node structures as before. - Add a user data pointer (info) to the route_table structure. This can be used by a client to keep per-table state. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-09-26lib: bring some changes over from bgp_table to tableAvneesh Sachdev
* lib/table.c - Maintain table node count. Expose it via the route_table_count() function (from revision cbdfbaa5). - route_unlock_node(): Add assertion (from revision 228da428). - route_table_free(): Make static and fix up cleanup code (from revision 228da428). - route_node_delete(): Change to be static. - Add 'const' qualifier in a couple places. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-07-19lib: make IPv6 prefix parser slightly more strictDavid Lamparter
This makes it possible to have both "show babel route A.B.C.D/M" and "show babel route X:X::X:X/M" commands at the same time without the parser complaining about ambiguity. * lib/command.c: only accept STATE_DOT after : was seen. Reported-by: Juliusz Chroboczek <jch@pps.jussieu.fr> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-06-25snmp: let handlers accept OID from a lesser prefixVincent Bernat
Most table handlers do not expect to be given an OID whose prefix is outside what they can handle. This is not a problem with the SMUX implementation since it always correct the OID such that the prefix matches. However, this is not the case for the AgentX implementation. A new function, smux_header_table() is used to do this normalization.
2012-06-25agentx: handle SNMP trapsVincent Bernat
smux_trap() signature has been changed to provide appropriate level information to send SNMPv2 notifications. This includes the addition of the enterprise OID to use (from which is derived the SNMP trap OID) and the MIB registry to locate the appropriate function for variable bindings provided by the trap. The SMUX implementation has been updated but ignore the provided enterprise OID. Instead, it still uses the SMUX peer OID to keep compatibility with previous versions of Quagga. The SMUX implementation also ignores the provided MIB registry since it uses smux_get() function to grab the appropriate values. This is not possible with the AgentX implementation since there is no such function provided by NetSNMP.
2012-06-25smux: drop findVar element from trap object structVincent Bernat
This element was not unused.
2012-06-25smux: remove `tick` argument from smux_trap()Vincent Bernat
smux_trap() contains an argument whose use appears to be to set sysUpTime.0/timestamp field in SNMP trap. However, this value is not used in smux_trap(). Moreover, it is expected that this field is the value of sysUpTime.0 when the trap was sent and not any other time related to the trap. To avoid any confusion, we remove this field from the signature of the function.
2012-06-25agentx: add AgentX support to Quagga.Vincent Bernat
--enable-snmp will enable AgentX support in Quagga. SMUX is still here and can be enabled with --enable-snmp=smux. AgentX support can be enabled with "agentx" in configuration file. As for SMUX, this command is not understood by vtysh. It can be disabled with "no agentx", though there is no real use of this since this command cannot be used with vtysh. If "agentx" and "no agentx" command were added to vtysh, it would not be possible to disable agentx support after enabling it because NetSNMP does not expose the appropriate methods for this. The internals of AgentX are hidden by NetSNMP. Therefore, we don't have a file descriptor to add to the threading system. We do not have the timers to set either. Therefore, the event loop is modified to make use of snmp_select_info() from NetSNMP. Traps are not supported yet.
2012-06-25smux: isolate SMUX implementation from SNMP implementationVincent Bernat
lib/snmp.c gets OID related helper functions that can be used with another SNMP interface. smux.h is cleaned of SMUX specific bits to only expose functions that may be used by an alternative implementation. We also do not redefine functions already present in NetSNMP. Just use the appropriate headers.
2012-06-25build: use net-snmp-config to configure NetSNMPVincent Bernat
The correct method to link to NetSNMP is to use net-snmp-config (which is like pkg-config). Explicit link to libcrypto is also dropped (NetSNMP libs are linked to libcrypto, no need to link Quagga to it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a bug in configure.ac, it was properly populated.
2012-06-25build: only define HAVE_SNMPVincent Bernat
NetSNMP is the only SNMP implementation for Quagga. We don't need two different symbols.
2012-06-25build: allow configure and build in a separate directoryVincent Bernat
Some .h files in lib/ are autogenerated. The search path should include the build directory and the source directory. They usually match but sometimes, they may be different. For example: $ mkdir build $ cd build $ ../configure $ make
2012-06-14lib: Add back sockunion_str2suPaul Jakma
* sockunion.h: Add back sockunion_str2su, its removal breaks things needlessly (e.g. our own unit tests). * sockunion.c: (sockunion_str2su) implement on top of str2sockunion.
2012-05-22lib: do not allocate/free thread funcnamesJorge Boncompte [DTI2]
This avoids memory heap fragmentation and imposses less load on the system memory allocator. * thread.h: FUNCNAME_LEN defined to 64 (ISO C99 says max 63) Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [changed FUNCNAME_LEN to a less arbitrary value] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22lib: micro-op for thread_get()Jorge Boncompte [DTI2]
thread_trim_head() already checks that the list is not empty. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22lib: remove RUSAGE_T from struct threadJorge Boncompte [DTI2]
* thread.c: It's only temporarily used in thread_call() to calculate the diffs. Saves 80 bytes per copy. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22micro-op bgp_node_[get|lookup]() and route_node_[get|lookup]()Jorge Boncompte [DTI2]
Reduce indirection for values that doesn't change in the loop. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [adjusted after dropping previous patch] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-22bgpd: optimize bgp_nexthop_self()Jorge Boncompte [DTI2]
This function scores 2nd, profiling a full internet table load. It's called for every prefix received. Instead of looping in the interface lists comparing addresses use a hash to mantain them. * bgpd.c: Init the own address hash. * bgp_nexthop.c: Introduce methods to maintain an own address hash. (bgp_connected_add) add addresses to the hash. (bgp_connected_delete) delete addresses from the hash. (bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t parameter. * bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address) Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-21lib: fix thread_cancel_event()Jorge Boncompte [DTI2]
ospfd was crashing some times on neighbour going down. The cause was that ospf_nsm_event() was accessing already freed memory in ospf_nbr_delete() call from ospf_nsm_event(). What happens is that since commit b5043aab (lib: fix incorrect thread list...) now a thread can be on the event and ready lists but thread_cancel_event() doesn't account for that. * thread.c: (thread_cancel_event) loop on the ready list too to cancel pending events. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-21lib: drop heuristic IPv6 address recognitionRoman Hoog Antink
* command.c: (cmd_ipv6_match) Drop IPv6 address recognition heuristics and solely rely on inet_pton, because strings like "abcd" were mistaken for IPv6 addresses. This affects e.g. the command "neighbour WORD peer-group", which won't work with words consisting of up to 4 characters between 'a' and 'f' and digits. From: Roman Hoog Antink <rha@open.ch> [full delete instead of #if 0] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-02lib: remove sockunion related unused definitionsJorge Boncompte [DTI2]
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02lib, zebra: extend use of sockunion2ip macroJorge Boncompte [DTI2]
* lib/sockunion.c, * zebra/zebra_rib.c: replace ->sin.sin_addr.s_addr with sockunion2ip Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [reworded commit message] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: Fix memory leak of some "show ip bgp neighbor" commandsJorge Boncompte [DTI2]
sockunion_str2su() use is prone to memory leaks. Remove it's use all over the code. At least these commands leaked a sockunion union: - show ip bgp vpnv4 ... routes - show ip bgp ... received prefix-filter Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02lib: remove last uses of sockunion_su2str()Jorge Boncompte [DTI2]
Use of this function is prone to memory leaks. This fixes a memory accounting bug for vty denied connections. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd: Fix memory leak with 'set ip next-hop peer-address'Jorge Boncompte [DTI2]
A route-map with the mentioned statement causes a memory leak for every prefix that matches. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-04-20lib: bump ZSERV_VERSION to 2David Lamparter
continually changing the zserv protocol without bumping up the version number has made it impossible to talk to zebra without knowing the exact version. in reality, increasing the version number more often guards against inadvertedly running incompatible versions of a daemon and zebra as well as aids external development. * lib/zclient.h: #define ZSERV_VERSION 2 Signed-off-by: David Lamparter <equinox@diac24.net>
2012-04-16isisd: merge osr/google-is-isDavid Lamparter
this is essentially half of a rewrite of isisd. please note that a lot of things are still broken and isisd is not ready for production use.