summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2003-05-23From: Hasso Tepper <hasso@estpak.ee>paul
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch Add the 'no interface' command to all the daemons and vtysh.
2003-05-22Add additional system capabilitiespaul
2003-05-20Fix stray comment and using pwentry for group info.paul
2003-05-20Undo revision 1.3, revert back to zebra_org 1.1.1.2.paul
asm/types.h is required for netlink. Later glibc's seem to have resolved the warning.
2003-05-20Fix several small caps related errors.paul
2003-05-20Privilege support files for zebra.paul
Linux capabilities enabled (if libcap is enabled).
2003-05-19From: Paul Jakma <paul@clubi.ie>paul
Subject: [zebra 19097] HAVE_ASM_TYPES does anyone know why lib/zebra.h has: #ifdef HAVE_ASM_TYPES_H #include <asm/types.h> #endif /* HAVE_ASM_TYPES_H */ There's no need for it that i can see (least not on linux) and it causes compile warnings. Is it needed? If so, why?
2003-05-16Update Changelogspaul
2003-05-08From: Sergiy Vyshnevetskiy <serg @ vostok.net>paul
Subject: [zebra 19019] [PATCH] daemons -A option Works now. Patch attached. Not tested for IPv6, but should work there too.
2003-04-19Hasso Tepperpaul
http://hasso.linux.ee/zebra/ht-distribute-18042003.patch Allows to extract.pl to pickup "distribute-list ..." commands for vtysh (ripngd and ripd).
2003-04-19Hasso Tepperpaul
http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh (ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the ripngd/ directory.
2003-04-09Add Makefile.in to the remaining .cvsignore'spaul
Add ospfclient to ospfclient/.cvsignore
2003-04-07Remove auto* files from the repository.paul
Developers working with the repository should have the appropriate tools. Out-of-sync files cause far too many problems with users as well as auto* scripts not being half as portable across systems as they ought to be. make-dist exists for a reason. Todo: make the CVS snapshot script do make-dist, and use the resulting tarball as the snapshot.
2003-04-042003-04-04 Paul Jakma <paul@dishone.st>paul
* Sync to Zebra CVS * Fix lib/thread.h leak * Fix small Opaque LSA leak * Do not configure OSPF interfaces for secondary addresses * vtysh fixes from Hasso * Dave Watson's missing ntohs fix
2003-03-27Need to free the defunct funcname if we grab a thread from the unused list.paul
2003-03-252003-03-25 Paul Jakma <paul@dishone.st>paul
* sync to latest zebra CVS * spec file: updated and added define for ospf-api/client NB: OSPF-API has been broken by the zebra.org changes, which has added struct ospf * as a new arg to many functions
2003-03-18Fix build for net-snmppaul
2003-03-17Amir Guindehi <amir@datacore.ch>paul
-------------------------------- I've attached a small patch for zebra-pj, which adds the installation of libospf.a libzebra.a, libospfapi.a and the needed headers for ospfapi clients. the headers get installed to /usr/include/ospfd/* and /usr/include/ospfapi.
2003-03-17Update auto files.paul
No doubt builds will now break for everyone. (works here - autoconf 2.13)
2003-03-12Fix memory leak in 'show thread cpu' command.paul
2003-03-01Sync to Zebra.org 20030301paul
2003-02-17Revert to zebra.org automake filespaul
2003-02-13Update auto* build filespaul
2003-01-18This patch adds Yon's CLI 'walk back up tree' patch. Following are emailpaul
describing original patch and a shorter email describing changes to an updated patch, the one which is applied: From havanna_moon@gmx.net Sat Jan 18 00:37:13 2003 Date: Mon, 9 Dec 2002 05:32:58 +0100 (CET) From: Yon Uriarte <havanna_moon@gmx.net> To: "the list(tm) Zebra" <zebra@zebra.org> Subject: [zebra 16671] [PATCH] CLI extensions. Hi, this patch adds 2 improvements to the CLI (lib/command.c): #1) When in subconfig mode (router XXX, interface XXX, ...) commands that fail for that node are tried on the main CONFIG_NODE. This is great for configuring interfaces or changing the sub-config mode quickly, without the need to type 'exit' between commands: ospfd(config)# int eth1 ospfd(config-if)# ip ospf cost 9 ospfd(config-if)# ip ospf prio 101 ospfd(config-if)# router ospf ospfd(config-router)# network 1.1.1.0/24 area 51 ospfd(config-router)# int eth2 ospfd(config-if)# ip ospf authentication message-digest ospfd(config-if)# ^Z ospfd# Is this IOS-like or does IOS try to walk up the tree of config sub-modes instead of directly trying the command on CONFIG_NODE? CAVEATS: "?" and "TAB" don't work. IIRC IOS doesnt show that help neither. NON-CAVEATS: This wont break much, as config_from_file() already does try a failed command on the parent node of the actual vty->node. If changing the code to walk the node tree instead of directly trying the command on the ENABLE_NODE the same semantics would be in use and no future bugs could creep in. #2) When in config or subconfig mode use the "do " prefix to execute commans of the ENABLE_NODE. "?" and "TAB" work. The space after the "do" is needed: ospfd(config-router)# do<?> % There is no matched command. ospfd(config-router)# do <?> clear Reset functions configure Configuration from vty interface copy Copy configuration debug Debugging functions (see also 'undebug') disable Turn off privileged mode command end End current mode and change to enable mode. exit Exit current mode and down to previous mode help Description of the interactive help system list Print command list no Negate a command or set its defaults quit Exit current mode and down to previous mode show Show running system information terminal Set terminal line parameters who Display who is on vty write Write running configuration to memory, network, or terminal ospfd(config-router)# do sho<TAB> ospfd(config-router)# do show me<TAB> ospfd(config-router)# do show memory r<TAB> ospfd(config-router)# do show memory rip RIP structure : 0 RIP route info : 0 RIP interface : 0 RIP peer : 0 RIP offset list : 0 RIP distance : 0 ospfd(config-router)# ^Z ospfd# CAVEATS: I don't have access to an IOS with this feature, so I implemented it from the comments on this mailing list (in fact my personal motivation was to implement feature #1, which I missed on zebra. But #2 sounded like a nice one to have, and xemacs was already parked on command.c ...). Is this IOS-like or are there differences? I will happily change this patch to mimick IOS or the mailing-list consensus on CLI-usability. regards, yon From havanna_moon@gmx.net Sat Jan 18 01:13:11 2003 Date: Sat, 11 Jan 2003 23:36:51 +0100 (CET) From: Yon Uriarte <havanna_moon@gmx.net> To: zebra@zebra.org Subject: [zebra 17218] Re: [PATCH] CLI extensions. Hi, [redacted] > I prefer the IOS way for the node "up walking". This patch should walk the tree upwards: bgpd(config)# router bgp 1 bgpd(config-router)# address-family ipv4 multicast bgpd(config-router-af)# access-list 1 remark hola que tal bgpd(config)# I cant test all combinations, so I cant rule out some bugs. I'd love to get (long and explicit) bug reports. [redacted]
2003-01-18Finish off merge off CLI extensions, see below for description. Merge shouldpaul
be off: From havanna_moon@gmx.net Sat Jan 18 00:37:13 2003 Date: Mon, 9 Dec 2002 05:32:58 +0100 (CET) From: Yon Uriarte <havanna_moon@gmx.net> To: "the list(tm) Zebra" <zebra@zebra.org> Subject: [zebra 16671] [PATCH] CLI extensions. Hi, this patch adds 2 improvements to the CLI (lib/command.c): #1) When in subconfig mode (router XXX, interface XXX, ...) commands that fail for that node are tried on the main CONFIG_NODE. This is great for configuring interfaces or changing the sub-config mode quickly, without the need to type 'exit' between commands: ospfd(config)# int eth1 ospfd(config-if)# ip ospf cost 9 ospfd(config-if)# ip ospf prio 101 ospfd(config-if)# router ospf ospfd(config-router)# network 1.1.1.0/24 area 51 ospfd(config-router)# int eth2 ospfd(config-if)# ip ospf authentication message-digest ospfd(config-if)# ^Z ospfd# Is this IOS-like or does IOS try to walk up the tree of config sub-modes instead of directly trying the command on CONFIG_NODE? CAVEATS: "?" and "TAB" don't work. IIRC IOS doesnt show that help neither. NON-CAVEATS: This wont break much, as config_from_file() already does try a failed command on the parent node of the actual vty->node. If changing the code to walk the node tree instead of directly trying the command on the ENABLE_NODE the same semantics would be in use and no future bugs could creep in. #2) When in config or subconfig mode use the "do " prefix to execute commans of the ENABLE_NODE. "?" and "TAB" work. The space after the "do" is needed: ospfd(config-router)# do<?> % There is no matched command. ospfd(config-router)# do <?> clear Reset functions configure Configuration from vty interface copy Copy configuration debug Debugging functions (see also 'undebug') disable Turn off privileged mode command end End current mode and change to enable mode. exit Exit current mode and down to previous mode help Description of the interactive help system list Print command list no Negate a command or set its defaults quit Exit current mode and down to previous mode show Show running system information terminal Set terminal line parameters who Display who is on vty write Write running configuration to memory, network, or terminal ospfd(config-router)# do sho<TAB> ospfd(config-router)# do show me<TAB> ospfd(config-router)# do show memory r<TAB> ospfd(config-router)# do show memory rip RIP structure : 0 RIP route info : 0 RIP interface : 0 RIP peer : 0 RIP offset list : 0 RIP distance : 0 ospfd(config-router)# ^Z ospfd# CAVEATS: I don't have access to an IOS with this feature, so I implemented it from the comments on this mailing list (in fact my personal motivation was to implement feature #1, which I missed on zebra. But #2 sounded like a nice one to have, and xemacs was already parked on command.c ...). Is this IOS-like or are there differences? I will happily change this patch to mimick IOS or the mailing-list consensus on CLI-usability. regards, yon
2003-01-17From havanna_moon@gmx.net Fri Jan 17 23:37:49 2003paul
Date: Sat, 11 Jan 2003 23:26:28 +0100 (CET) From: Yon Uriarte <havanna_moon@gmx.net> To: "the list(tm) Zebra" <zebra@zebra.org> Subject: [zebra 17217] [PATCH] show thread CPU Hi, a little patch from the 'stupid preprocessor tricks' collection to record thread statistics. Usage: "show thread cpu [r][w][t][e][x]" Output Fields: self explaining I hope. Type is one of RWTEX for: Read, Write (fd threads), Timer, Event, Execute. Overhead vs. vanilla zebra: almost nothing. Vanilla CVS zebra already collects thread run times. Caveats: Under linux getrusage has a granularity of 10ms, which is almost useless in this case. Run ./configure, edit config.h and comment out "#define HAVE_RUSAGE", this way it will use getimeofday which has a much better granularity. IMHO this is better, as cooperative threads are effectively running during all that wall time (dont care if CPU utilization was 3% or 99% during the time the thread was running (an effective rusage combined with getimeofday could give that info)). Maybe someone can give tips for other platforms on API granularity. TODO: change some of the calls to thread_add_$KIND to funcname_thread_add_$KIND with a meaningfull funcname, so users will get a better idea of what's going on. F.ex. (AFAIK): ospf_spf_calculate_timer -> "Routes Step 1, areas SPF" ospf_ase_calculate_timer -> "Routes Step 2, externals" Could this be added to the unofficial patch collection? Could someone with BGP keepalive problems run their bgpd with this patch and post the results? TIA, HTH, HAND, regards yon Example output: -------------------------------- ospfd# show thread cpu Runtime(ms) Invoked Avg uSecs Max uSecs Type Thread 14.829 31 478 585 T ospf_ase_calculate_timer 82.132 9838 8 291 EX ospf_nsm_event 0.029 1 29 29 E ospf_default_originate_timer 0.254 9 28 34 T ospf_db_desc_timer 0.026 7 3 11 T ospf_wait_timer 669.015 523 1279 490696 R vty_read 4.415 45 98 173 TE ospf_network_lsa_refresh_timer 15.026 31 484 588 T ospf_spf_calculate_timer 29.478 1593 18 122 E ospf_ls_upd_send_queue_event 0.173 1 173 173 T vty_timeout 4.173 242 17 58 E ospf_ls_ack_send_event 637.767 121223 5 55 T ospf_ls_ack_timer 39.373 244 161 2691 R zclient_read 12.169 98 124 726 EX ospf_ism_event 0.226 2 113 125 R vty_accept 537.776 14256 37 3813 W ospf_write 4.967 41 121 250 T ospf_router_lsa_timer 0.672 1 672 672 E zclient_connect 7.901 1658 4 26 T ospf_ls_req_timer 0.459 2 229 266 E ospf_external_lsa_originate_timer 3.203 60 53 305 T ospf_maxage_lsa_remover 108.341 9772 11 65 T ospf_ls_upd_timer 33.302 525 63 8628 W vty_flush 0.101 1 101 101 T ospf_router_lsa_update_timer 0.016 1 16 16 T ospf_router_id_update_timer 26.970 407 66 176 T ospf_lsa_maxage_walker 381.949 12244 31 69 T ospf_hello_timer 0.114 22 5 14 T ospf_inactivity_timer 34.290 1223 28 310 T ospf_lsa_refresh_walker 470.645 6592 71 665 R ospf_read 3119.791 180693 17 490696 RWTEX TOTAL ospfd# bgpd# sh t c TeX Runtime(ms) Invoked Avg uSecs Max uSecs Type Thread 21.504 476 45 71 T bgp_keepalive_timer 17.784 1157 15 131 T bgp_reuse_timer 29.080 193 150 249 T bgp_scan 23.606 995 23 420 E bgp_event 317.734 28572 11 69 T bgp_routeadv_timer 0.084 1 84 84 E zlookup_connect 0.526 1 526 526 E zclient_connect 1.348 13 103 147 T bgp_start_timer 19.443 142 136 420 T bgp_connect_timer 16.032 772 20 27 T bgp_import 447.141 32322 13 526 TEX TOTAL bgpd# bgpd# show thread cpu rw Runtime(ms) Invoked Avg uSecs Max uSecs Type Thread 155.043 7 22149 150659 R bgp_accept 129.638 180 720 53844 R vty_read 1.734 56 30 129 R zclient_read 0.255 2 127 148 R vty_accept 58.483 983 59 340 R bgp_read 171.495 29190 5 245 W bgp_write 13.884 181 76 2542 W vty_flush 530.532 30599 17 150659 RW TOTAL bgpd# --------------------------------
2002-12-13 Kevin C Miller <kevinm@andrew.cmu.edu>paul
[zebra 16681] OSPF NSSA Patches
2002-12-13Yon Uriarte <havanna_moon@gmx.net>paul
[zebra 16671] [PATCH] CLI extensions.
2002-12-13[zebra 14631] Generic PtP and RFC3021 interface addressing supportpaul
2002-12-13zebra link state detection supportpaul
2002-12-13Added RIPv1 patch - bug fixes and improved/more interoperable classfulpaul
subnet handling
2002-12-13Initial revisionpaul