Age | Commit message (Collapse) | Author |
|
This makes it possible to have both "show babel route A.B.C.D/M"
and "show babel route X:X::X:X/M" commands at the same time without
the parser complaining about ambiguity.
* lib/command.c: only accept STATE_DOT after : was seen.
Reported-by: Juliusz Chroboczek <jch@pps.jussieu.fr>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Most table handlers do not expect to be given an OID whose prefix is
outside what they can handle. This is not a problem with the SMUX
implementation since it always correct the OID such that the prefix
matches. However, this is not the case for the AgentX
implementation. A new function, smux_header_table() is used to do this
normalization.
|
|
smux_trap() signature has been changed to provide appropriate level
information to send SNMPv2 notifications. This includes the addition
of the enterprise OID to use (from which is derived the SNMP trap OID)
and the MIB registry to locate the appropriate function for variable
bindings provided by the trap.
The SMUX implementation has been updated but ignore the provided
enterprise OID. Instead, it still uses the SMUX peer OID to keep
compatibility with previous versions of Quagga. The SMUX
implementation also ignores the provided MIB registry since it uses
smux_get() function to grab the appropriate values. This is not
possible with the AgentX implementation since there is no such
function provided by NetSNMP.
|
|
This element was not unused.
|
|
smux_trap() contains an argument whose use appears to be to set
sysUpTime.0/timestamp field in SNMP trap. However, this value is not
used in smux_trap(). Moreover, it is expected that this field is the
value of sysUpTime.0 when the trap was sent and not any other time
related to the trap. To avoid any confusion, we remove this field from
the signature of the function.
|
|
--enable-snmp will enable AgentX support in Quagga. SMUX is still here
and can be enabled with --enable-snmp=smux. AgentX support can be
enabled with "agentx" in configuration file. As for SMUX, this command
is not understood by vtysh. It can be disabled with "no agentx",
though there is no real use of this since this command cannot be used
with vtysh.
If "agentx" and "no agentx" command were added to vtysh, it would not
be possible to disable agentx support after enabling it because
NetSNMP does not expose the appropriate methods for this.
The internals of AgentX are hidden by NetSNMP. Therefore, we don't
have a file descriptor to add to the threading system. We do not have
the timers to set either. Therefore, the event loop is modified to
make use of snmp_select_info() from NetSNMP.
Traps are not supported yet.
|
|
lib/snmp.c gets OID related helper functions that can be used with
another SNMP interface. smux.h is cleaned of SMUX specific bits to
only expose functions that may be used by an alternative
implementation. We also do not redefine functions already present in
NetSNMP. Just use the appropriate headers.
|
|
The correct method to link to NetSNMP is to use net-snmp-config (which
is like pkg-config). Explicit link to libcrypto is also dropped
(NetSNMP libs are linked to libcrypto, no need to link Quagga to
it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a
bug in configure.ac, it was properly populated.
|
|
NetSNMP is the only SNMP implementation for Quagga. We don't need two
different symbols.
|
|
Some .h files in lib/ are autogenerated. The search path should
include the build directory and the source directory. They usually
match but sometimes, they may be different. For example:
$ mkdir build
$ cd build
$ ../configure
$ make
|
|
* sockunion.h: Add back sockunion_str2su, its removal breaks things needlessly
(e.g. our own unit tests).
* sockunion.c: (sockunion_str2su) implement on top of str2sockunion.
|
|
This avoids memory heap fragmentation and imposses less load on the
system memory allocator.
* thread.h: FUNCNAME_LEN defined to 64 (ISO C99 says max 63)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[changed FUNCNAME_LEN to a less arbitrary value]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
thread_trim_head() already checks that the list is not empty.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* thread.c: It's only temporarily used in thread_call() to calculate the
diffs. Saves 80 bytes per copy.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Reduce indirection for values that doesn't change in the loop.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[adjusted after dropping previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This function scores 2nd, profiling a full internet table load. It's called
for every prefix received.
Instead of looping in the interface lists comparing addresses use a hash
to mantain them.
* bgpd.c: Init the own address hash.
* bgp_nexthop.c: Introduce methods to maintain an own address hash.
(bgp_connected_add) add addresses to the hash.
(bgp_connected_delete) delete addresses from the hash.
(bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t
parameter.
* bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to
not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ospfd was crashing some times on neighbour going down. The cause was that
ospf_nsm_event() was accessing already freed memory in ospf_nbr_delete()
call from ospf_nsm_event().
What happens is that since commit b5043aab (lib: fix incorrect thread
list...) now a thread can be on the event and ready lists but
thread_cancel_event() doesn't account for that.
* thread.c: (thread_cancel_event) loop on the ready list too to cancel
pending events.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* command.c: (cmd_ipv6_match) Drop IPv6 address recognition
heuristics and solely rely on inet_pton, because strings
like "abcd" were mistaken for IPv6 addresses.
This affects e.g. the command "neighbour WORD peer-group",
which won't work with words consisting of up to 4 characters
between 'a' and 'f' and digits.
From: Roman Hoog Antink <rha@open.ch>
[full delete instead of #if 0]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/sockunion.c,
* zebra/zebra_rib.c: replace ->sin.sin_addr.s_addr with sockunion2ip
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[reworded commit message]
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
sockunion_str2su() use is prone to memory leaks. Remove it's use all over
the code.
At least these commands leaked a sockunion union:
- show ip bgp vpnv4 ... routes
- show ip bgp ... received prefix-filter
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Use of this function is prone to memory leaks.
This fixes a memory accounting bug for vty denied connections.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
A route-map with the mentioned statement causes a memory leak for every
prefix that matches.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
continually changing the zserv protocol without bumping up the version
number has made it impossible to talk to zebra without knowing the exact
version. in reality, increasing the version number more often guards
against inadvertedly running incompatible versions of a daemon and zebra
as well as aids external development.
* lib/zclient.h: #define ZSERV_VERSION 2
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
this is essentially half of a rewrite of isisd. please note that a lot
of things are still broken and isisd is not ready for production use.
|
|
The steps were:
$ git checkout google-is-is
$ git merge quagga
$ git checkout google-is-is -- isisd
# Resolve conflicts in the following:
lib/md5.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Note that the content in the isisd directory is left unchanged in the
merge. As a result, changes made to isisd as part of the following
commits on the quagga mainline are dropped.
# 8ced4e82 is the merge base, e96b3121 is the current quagga master
$ git log --oneline --reverse 8ced4e82..e96b3121 -- isisd
5574999 isisd: fix crash on "no router isis" (BZ#536)
8998075 isisd: raise hello rate for DIS (BZ#539)
306ca83 isisd: include hash.h, not hash.c
b82cdeb delete CVS keywords
2f65867 isisd: indent longopts array
b511468 quagga: option "-z" ("--socket <path>") added
05e54ee build: delete .cvsignore files
b4e45f6 fix zebra protocol after MP-BGP changes
7fd6cd8 isisd: fix circuit state machine
907fd95 isisd: send proper LSP after DIS election
d034aa0 isisd: fix wrong next-hops from SPF
c25eaff isisd: unexpected kernel routing table (BZ#544)
e6b03b7 isisd: implement MD5 circuit authentication
|
|
Conflicts:
bgpd/bgp_route.c
|
|
Change interface up/down notification messages to also include the
hardware address of the interface. The format of these messages is now
identical to the interface add message -- move the serialization code
to common functions.
* lib/zclient.c: Modify zebra_interface_if_set_value() to also parse
the hardware address. Invoke it from zebra_interface_add_read()
and and zebra_interface_state_read().
* zebra/zserv.c: Add zserv_encode_interface(). Invoke it from
zserv_interface_add(), zserv_interface_delete() and
zserv_interface_update().
|
|
* lib/if.c: Change if_delete_retain() to delete all connected
addresses, but to not free the list that holds them. Free the list
just before the interface structure itself is freed, in
if_delete().
|
|
|
|
* lib/stream.[ch]:
- Add stream_set_endp(). This can be used to trim data (for
example, padding) at the end of a stream.
- Fix swapped 'getp' and 'endp' parameters in STREAM_WARN_OFFSETS.
From: Subbaiah Venkata <svenkata@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/md5.[ch] Add implementation of HMAC-MD5 from RFC 2104.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/linklist.h
- Change the listnextnode, listhead and listtail macros so that
they allow the list pointer to be NULL.
- Modify the ALL_LIST_ELEMENTS* macros such that they clear the
data pointer at the beginning and end of the loop.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
nonwithstanding any desire for optimisation, these versions are shorter
and more concise. reading the comments, they might even be easier to
understand.
I've tested them on i686 and x86_64, and checked that correct assembler
code is emitted for ARM, MIPS and PowerPC.
IPv6 is left as an exercise for another day, none of the ideas I had led
to a "yes, this is the one to go with" solution.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
This reverts commit d171bf58ef12ace43d48565e6870722dece1e6ed.
There are multiple reasons for this revert, including bug #720, but also
quite simply the unreadability of having 2000 lines of an autogenerated
table in the middle of a source file.
Signed-off-by: David Lamparter <equinox@diac24.net>
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
|
|
|
|
|
|
* Initial import of the Babel routing protocol, ported to Quagga.
* LICENCE: Update the original LICENCE file to include all known potentially
applicable copyright claims. Ask that any future contributors to babeld/
grant MIT/X11 licence to their work.
* *.{c,h}: Add GPL headers, in according with the SFLC guidance on
dealing with potentially mixed GPL/other licensed work, at:
https://www.softwarefreedom.org/resources/2007/gpl-non-gpl-collaboration.html
|
|
While defining two "maskbytes" arrays for the respective endiannesses,
the code was unconditionally using one that only worked on little endian
systems.
Use preprocessor macros to avoid the somewhat expensive
htonl/ntohl macros.
From: Renato Westphal <renatowestphal@gmail.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* thread.c: (thread_timer_process,thread_process) thread_list_delete nulls
thread->next. Loops need to save next first, or will only process the head.
Problem noted by Lou Berger <lberger@labn.net>.
|
|
|
|
* lib/thread.h: new timer macro, millisecond precision
(this was cherrypicked from pimd to isolate all non-contained changes)
From: Everton Marques <everton.marques@gmail.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* Replace command "isis passwd" with "isis passwd {clear|md5}"
* Verify HMAC MD5 on ISIS Hello PDUs
* Add HMAC MD5 authentication to md5.h/md5.c from RFC2104
|
|
This patch contains the following:
1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.
2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
|
|
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
|
|
|
|
* if.c: (if_dump) loop that doesn't do anything, wants to be
before the zlog of what it's meant to print out so all the connected
addresses get printed out. Trival: just a debug function
|
|
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
|
|
...otherwise 4294967295 is not a valid value on 32bit systems
|
|
IPV4_ADDR_SAME() wasn't passed the right union member, this could cause
a bug due to strict-aliasing. IPV6_ADDR_SAME() case got its fix before
the error could be created by macro upgrade.
|