| Age | Commit message (Collapse) | Author |
|---|
|
2007-05-03 Paul Jakma <paul.jakma@sun.com>
* bgp_route.h: (struct info) Move less frequently used
fields to a lazily allocated struct info_extra.
Export bgp_info_extra_get
* bgp_route.c: (bgp_info_extra_new) allocate extra
(bgp_info_extra_free) Free damp info and the info_extra.
(bgp_info_extra_get) Retrieve the info_extra of a struct
info, allocating as required.
(generally) adjust to use info->extra
* bgp_damp.c: (generally) use bgp_info_extra_get to access
dampinfo
* bgp_attr.h: Move rarely allocated attributes from struct attr
to a struct attr_extra, for a substantial saving in size of
struct attr.
* bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory.
(bgp_attr_extra_get) Get the attr_extra for a given struct
attr, allocating it if needs be.
(bgp_attr_dup) Shallow copy the struct attr and its attr_extra.
(generally) adjust to know about attr->extra.
* bgp_debug.c: (bgp_dump_attr) ditto
* bgp_vty.c: (show_bgp_memory) print attr and info extra sizes.
* bgp_nexthop.c: (generally) adjust to know about attr->extra
and info->extra.
* bgp_{packet,routemap,snmp,zebra}.c: ditto
* lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
2007-04-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* log.c: (quagga_timestamp) Optimize the subsecond timestamp generation.
|
|
2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* command.c: (config_write_host) Save "log timestamp precision"
if not default value.
(show_logging) Show configured timestamp precision.
(config_log_timestamp_precision) Enable configuration of timestamp
precision.
(no_config_log_timestamp_precision) Restore default timestamp
precision.
(cmd_init) Install new timestamp precision commands.
* log.h: (struct zlog) New timestamp_precision field.
(quagga_timestamp) New function to generate a timestamp with the
desired precision.
(struct timestamp_control) Declare a structure for use in avoiding
repeated duplicate calls to quagga_timestamp.
* log.c: (quagga_timestamp) New function to generate a timestamp
of the desired precision.
(time_print) Call quagga_timestamp if the time hasn't already been
calculated.
(vzlog) Initialize a timestamp_control structure and pass it to
time_print and vty_log.
(zlog_backtrace) Fix 64-bit problem: cannot print size_t with %u.
* vty.h: Must now include "log.h".
(vty_log) Takes an additional struct timestamp_control argument.
* vty.c: (vty_log_out) Use new struct timestamp_control and new
quagga_timestamp function to print timestamps of the desired
precision.
(vty_time_print) Use new quagga_timestamp function.
(vty_log) Accept new struct timestamp_control argument and pass it
down to vty_log_out.
|
|
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* lib/smux.c: (smux_trap) Fix printf format to work with 64-bit size_t.
* ospf6d/ospf6_snmp.c: (ospfv3AreaEntry, ospfv3AreaLsdbEntry) Fix some
zlog_debug printf formats to work with 64-bit size_t.
|
|
2007-04-07 Paul Jakma <paul.jakma@sun.com>
* lib/prefix.h: Add define to match IPv4 Link-Local addresses
* zebra/redistribute.c: (zebra_check_addr) Don't redistribute routes
to IPv4 link-local prefixes, fixes bug #351.
* zebra/redistribute.h: Export zebra_check_addr.
* zebra/router-id.c: (router_id_bad_address) re-use zebra_check_addr
rather than implementing similar logic.
|
|
2007-03-20 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* log.c: (mes_lookup) Make the function more robust: check for
cases where the index does not match the key value at that position.
If so, give a warning and fall back to a linear search.
And improve the error message in cases where even that fails.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-10-14 Paul Jakma <paul.jakma@sun.com>
* if.c: (general) Handle upgrades from SUNWzebra, which tried
to track each logical interface as a seperate struct
interface, to Quagga, which assigns only one struct interface
per ifindex.
(if_sunwzebra_get) Try decompose a logical interface name
(fooX:Y) to the 'primary' name (fooX), for Solaris.
(interface_cmd) Use if_sunwzebra_get on Solaris.
|
|
2006-09-26 Pierre-Yves Ritschard <pierre-yves@spootnik.org>
* smux.c: (smux_open,smux_trap,smux_register) Fix various
asn_build_* calls to pass the proper length in the final
argument: use sizeof(<variable>) instead of sizeof(<type>),
since there were several inconsistencies between the actual
variable type and the size that was passed. This should
fix some problems on 64-bit architectures where sizeof(int)
!= sizeof(long).
|
|
2006-08-25 Paul Jakma <paul.jakma@sun.com>
* thread.c: (general) Add support for monotonic clock, it may still
jump forward by huge amounts, but should be immune to going
backwards. Fixes bug #134.
(quagga_gettimeofday_relative_adjust) helper, does what name
says - adjusts gettimeofday based relative timer.
(quagga_gettimeofday) helper to keep recent_time up to date.
(quagga_get_relative) helper, update and getch the relative
timer using gettimeofday(). POSIX CLOCK_MONOTONIC is also
supported, but the code is not enabled yet nor tested.
(quagga_real_stabilised) helper, retrieve absolute time but
stabilised so as to never decrease.
(quagga_gettime) Exported interface, analogous to POSIX
clock_gettime() in interface, supporting several clocks.
(quagga_time) Exported interface, analogous to traditional
time(), will never decrease.
(recent_relative_time) Convenience function to retrieve
relative_time timeval, similar to existing recent_time absolute
timeval, for when an approximately recent value will do.
(remainder) Update to use above helpers.
(thread_getrusage) Previously was a macro, but needs to be
a function to twiddle with thread.c private stuff.
* thread.c: Point the GETRUSAGE macro at previous function.
Export quagga_gettime, quagga_time and recent_relative_time for
general use.
|
|
|
|
2006-07-25 Paul Jakma <paul.jakma@sun.com>
* thread.h: (struct thread) Add a cache pointer to the struct
cpu_thread_history, if it is known - saving hash lookup on
each thread_call.
* thread.c: (thread_call) Cache the pointer to the
cpu_thread_history, so that future thread_calls of same
thread can avoid the hash_lookup.
|
|
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out) Do not call vty_close, because this could
result in a parent function's accessing the freed memory.
Instead, set status VTY_CLOSE and call shutdown(vty->fd, SHUT_RDWR).
And add a comment on vty_close.
|
|
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out, vty_read, vty_flush, vtysh_flush, vtysh_read)
After an I/O error, must set vty->monitor to 0 before calling
zlog_warn, otherwise an infinite recursion could occur
(since zlog_warn triggers a message to be written to the vty,
and that in turn triggers another error message when it fails, etc.).
|
|
2006-07-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out) Debug messages to terminal vty sessions
should include timestamps.
|
|
- entry was left in wrong order, according to date.
|
|
2006-06-28 Paul Jakma <paul.jakma@sun.com>
* memory.c: Fix typo in cpp conditional around malloc.h, from
comment in bug #269.
|
|
2006-06-27 Paul Jakma <paul.jakma@sun.com>
* route_types.awk: Fix previous commit. Forgot to remove the
printf of the bare/numeric route-type help string (empty string)
|
|
2006-06-27 Paul Jakma <paul.jakma@sun.com>
* route_types.awk: Remove setting the 'bare' numeric route type
in redist strings.
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* route_types.txt: New file, table of ZEBRA_ROUTE definitions.
* route_types.awk: New script, to parse previous and generate
(for now) redistribute string defines.
* Makefile.am: build route_types.h using previous two, ala
memtypes.h, include the script and table file in EXTRA_DIST.
* command.h: pull in route_types.h, add a REDIST_STR define.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* lib/if.c: (if_flag_dump) remove the whitespace indentation, callers
should provide.
* zebra/interface.c: (if_flag_dump_vty) redundant code, remove.
(if_dump_vty) use libzebra if_flag_dump.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* linklist.c: (list_delete) call list_delete_all_node, don't
duplicate it.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* memory.h: Experimental, have XFREE macro NULL out the freed
pointer.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* command.c: (cmd_describe_command_real) Fix leak, CID #38.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* configure.ac:
Check for Sun libc printstack(), add a general HAVE_STACK_TRACE
define for lib/log.c, if any supported stack symbol dumping
function is found (glibc backtrace/sun libc printstack).
* log.c: (general) Add support for Sun libc printstack().
(hex_append) make the cpp conditional on general HAVE_STACK_TRACE
define.
(zlog_backtrace_sigsafe) Ditto. Add printstack() version of the
the DUMP macro in this function.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* vty.c: (vty_log/vty_log_fixed) dont crash if called when vty
hasn't been initiliased.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* memory.c: malloc.h is deprecated in favour of stdlib.h, however
we still need it on GNU Libc for mallinfo().
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* zebra.h: Include inttypes.h rather than stdint.h, best practice
according to the autoconf manual.
Add UINT*_MAX defines for older platforms lacking these (FBSD 4)
|
|
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Document the meaning of the
ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags.
* connected.c: (connected_withdraw) Do not delete the connected
address if the ZEBRA_IFC_CONFIGURED flag is set.
(connected_add_ipv4,connected_add_ipv6) Before calling
connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag
on the superseded connected structure.
|
|
2006-05-15 Paul Jakma <paul.jakma@sun.com>
* log.c: (general) Generalise struct zebra_route_desc into
struct zebra_desc_table and, similar to route_types, add a
command_types table to describe Zserv protocol commands.
(route_types[]) use a macro to use designated initialisers
while avoiding tedious duplication.
(zserv_command_string) lookup string from zebra_desc_table,
similar to zebra_route_string
* zebra.h: Add declaration for zserv_command_string, adjust the
comments to reflect zebra_desc_table.
|
|
2006-05-13 Paul Jakma <paul.jakma@sun.com>
* vty.c: (vty_describe_command) CID #39 fix was too hasty, just
cause it /can/ leak doesn't mean it always will have, check
first.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* command.c: (cmd_describe_command_real) Fix return of freed
pointer when no-match, CID #55.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* vty.c: (vty_describe_command) fix leak of describe vector in
error path, CID #39.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* command.c: (cmd_complete_command_real) Fix leak of cmd_vector
in error case, Coverity CID #37.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* plist.c: (vty_prefix_list_uninstall) Fix potential NULL deref
of prefix and typestr strings, Coverity CID #3.
|
|
2006-03-14 Paul Jakma <paul.jakma@sun.com>
* privs.c: (zprivs_caps_init) Change user IDs before lowering
privileges, while this seems to work on Linux, on Solaris
it rightfully refuses due to PRIV_PROC_SETID having been
dropped.
* command.h: Add the struct host global exported from command.c
|
|
2006-03-30 Paul Jakma <paul.jakma@sun.com>
* workqueue.c: (work_queue_run) fix line length of comment
|
|
2006-03-30 Paul Jakma <paul.jakma@sun.com>
* command.h: (DEFUN_CMD_FUNC_TEXT) Annotate arguments as
potentially being unused.
|
|
2006-03-27 Paul Jakma <paul.jakma@sun.com>
* memtypes.awk: Fix gensub call, g should be a string..
|
|
2006-03-25 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove status field and
state flag, no longer used.
|
|
2006-03-19 Paul Jakma <paul.jakma@sun.com>
* memtypes.c: Add MTYPE_BGP_SYNCHRONISE.
* bgp_advertise.c: Use a distinct memory type for struct
bgp_synchronize.
|
|
2006-03-16 Paul Jakma <paul.jakma@sun.com>
* Makefile.am: Fix -version-info argument.
|
|
2006-02-15 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Check for mallinfo, being careful to link test
so we can detect things like umem being used (which doesn't
provide a mallinfo).
* lib/memory.c: (mtype_memstr) new helper function to
return human friendly string for a byte count.
(mtype_stats_alloc) new function, for users to retrieve
number of objects allocated.
(show_memory_mallinfo) New function, show mallinfo statistics
if available.
(show_memory_all_cmd) Call show_memory_mallinfo, if mallinfo
is available.
* lib/memory.h: Export mtype_memstr and mtype_stats_alloc.
Provide a define for a reasonable buffer size for
mtype_memstr.
|
|
2006-03-14 Paul Jakma <paul.jakma@sun.com>
* privs.c: (zprivs_caps_init) Change user IDs before lowering
privileges, while this seems to work on Linux, on Solaris
it rightfully refuses due to PRIV_PROC_SETID having been
dropped.
|
|
2006-03-06 Paul Jakma <paul.jakma@sun.com>
* if.h: export show_address_cmd, for anyone who wishes to use
it.
|
|
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: (sockunion_{su2str,log}) Use XSTRDUP.
Particularly with _su2str, as that string gets XFREEd,
which can be annoying if run debug code in memory.c.
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove the delay field.
It served no purpose and just introduced bad behaviour.
Should be excised before its allowed to escape into 1.0.
This removes need for the 'flood' and runs_since_clear
fields.
* workqueue.c: (general) excise delay factor between queue
runs, hence the 'flood' crap too.. See above.
* bgp_route.c: (bgp_{clear_node,process}_queue_init) delay
field is removed from workqueue spec.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* stream.c: (stream_getq_from) should use POSIX uint64_t
not u_int64_t. Latter is neither a traditional BSD type, nor
a POSIX type.
|
|
* md5.c: Don't forget to keep const.
* regex.c: Cleanup code and remove warnings.
|
